1. Draw the transition state for the reaction of 1-chlorobutane and sodium hydroxide. 2. Explain why the following reaction results in racemization of the substitution product. CI CH3OH OCH3 OCH +
Answers
The reaction of 2-chlorobutanol with methanol, leading to the formation of 2-methoxybutane, results in racemization due to the formation of a planar carbocation intermediate.
The reaction between 1-chlorobutanol and sodium hydroxide involves the substitution of chlorine (Cl) by hydroxide (OH) group, resulting in the formation of 1-butanol.
The transition state for this reaction can be envisioned as an intermediate state where the chlorine atom is partially dissociated from the carbon atom it is bonded to, while the hydroxide ion is approaching and getting closer to that carbon atom. In this transition state, the carbon atom undergoes hybridization changes, forming new bonds. The chlorine-carbon bond is weakened, and the carbon-oxygen bond is formed.
2. The reaction of 2-chlorobutanol with methanol to yield 2-methoxybutane involves the substitution of chlorine (Cl) by a methoxy group (OCH₃). This reaction leads to the racemization of the substitution product due to the involvement of an intermediate carbocation.
This reaction proceeds via a [tex]SN_1[/tex] (unimolecular nucleophilic substitution) mechanism, which involves the formation of a carbocation intermediate. During the formation of the carbocation intermediate, the chlorine atom dissociates from the carbon, leaving a positively charged carbon atom behind.
This intermediate carbocation is planar and lacks chirality. Consequently, when the methoxy group (OCH₃) attacks the carbocation from either face of the carbocation with equal likelihood, resulting in the formation of both enantiomers. This leads to a racemic mixture of the product, containing equal amounts of the R and S configurations.
Learn more about nucleophilic substitution here:
https://brainly.com/question/30633020
#SPJ4
The complete question is:
1. Draw the transition state for the reaction of 1-chlorobutanol and sodium hydroxide. 2. Explain why the following reaction results in the racemization of the substitution product.
Reaction: 2-chlorobutanol gives rise to 2-methoxy butane in the presence of methanol.
Related Questions
For an aspirin synthesis experiment. 200 mg of salicylic acid and 2 ml acetic anhydride were added to a 25 ml round bottom flask. 5 mg of starting material was diluted in acetone for spotting onto the TLC plate. The reaction mixture was spotted directly without dilution. The plate developed 10:1 hexanes to ethyl acetate and was visualized with a ultraviolet lamp and stained with Iron (III) chloride (1% in MeOH:H2O). 10 ml of de-ionized water was slowly added to the mixture. An ice bath used for crystals formation. The reaction mixture was poured to a 50 ml Erlenmeyer flask. The product dried as the vacuum was on for 10 minutes and finally analyzed for NMR. Mass of purified aspirin product 1.00 (g)
Please answer the following:
Calculate the % yield of the reaction, clearly showing your work.
Carefully copy your TLC plates into your notebook; and then determine Rf values of the starting
material and product. Never submit the actual TLC plates with your lab report, copy them "to scale".
If the TLC solvent was switched to 1:1 H:E, would you expect the Rf values increase or decrease?
Additionally, draw a figure showing how such a TLC plate might look.
Draw a synthesis of the early analgesic phenacetin that employs acetic anhydride, with mechanism.
Answers
The % yield of the aspirin synthesis reaction can be calculated using the following formula: % Yield = (Actual yield / Theoretical yield) * 100
To determine the actual yield, we are given that the mass of the purified aspirin product is 1.00 g. The theoretical yield can be calculated based on the molar mass of salicylic acid (C7H6O3), which is 138.12 g/mol, and assuming a stoichiometric ratio of 1:1 between salicylic acid and aspirin.
The molar mass of salicylic acid is (7 * 12.01) + (6 * 1.01) + (3 * 16.00) = 138.12 g/mol.
The theoretical yield can be calculated as follows:
Theoretical yield = (Mass of salicylic acid used / Molar mass of salicylic acid) * Molar mass of aspirin
Mass of salicylic acid used = 200 mg = 0.2 g
Theoretical yield = (0.2 g / 138.12 g/mol) * 180.16 g/mol
Now, you can plug in the values and calculate the % yield.
To determine the Rf values of the starting material and product on the TLC plate, you need to measure the distance traveled by each spot (distance from the origin to the center of the spot) and divide it by the distance traveled by the solvent (distance from the origin to the solvent front). This will give you the Rf value for each compound.
Switching the TLC solvent to 1:1 H: E (hexanes: ethyl acetate) would likely increase the Rf values of both the starting material and the product. This is because ethyl acetate is a more polar solvent compared to hexanes, and a more polar solvent tends to increase the mobility of compounds on the TLC plate.
Unfortunately, I am unable to generate a visual representation of the TLC plate or draw the synthesis of phenacetin using acetic anhydride with the mechanism.
Learn more about aspirin synthesis, below:
https://brainly.com/question/31384944
#SPJ11
If CaCl2 is added to the following reaction mixture at equlibrium, how will the quantities of each component compare to the original mixture after equilibrium is reestablished?
Ca3(PO4)2(s)⇌3Ca2+(aq)+2PO3−4(aq)
Enter chemical formulas Ca2+, PO3−4 and Ca3(PO4)2.
For inputs requiring than one component, use commas and only commas to separate chemical formulas (do not type the word "and" or any other conjunction).
Do NOT include phase (state) information.
Do NOT include concentration brackets.
Answers
If CaCl2 is added to the equilibrium mixture, the equilibrium will shift to the left, favouring the formation of the reactant Ca3(PO4)2. As a result, the concentration of Ca2+ and PO3−4 ions will decrease, while the concentration of Ca3(PO4)2 will increase compared to the original mixture.
When CaCl2 is added, it dissociates into Ca2+ and 2Cl− ions. The increased concentration of Ca2+ ions will react with the available PO3−4 ions, forming more Ca3(PO4)2 and reducing the concentration of Ca2+ and PO3−4 ions. This is known as the common ion effect, where the addition of an ion that is already present in the equilibrium mixture suppresses the ionization of other ions
To learn more about common ion effect, click here:
brainly.com/question/30772969
#SPJ11
What would happen to the average kinetic energy of the molecules of a gas sample if the temperature of the sample increased from 20°C to 40°C? would increase O It would decrease O It would double O It would become half its value
Answers
If the temperature of a gas sample increases from 20°C to 40°C, the average kinetic energy of the gas molecules would increase.
Generally, according to the kinetic theory of gases, the average kinetic energy of gas molecules is always directly proportional to the temperature of the gas. The relationship for the above is given by the equation:
Average kinetic energy = (3/2) × k × T
In this equation k represents the Boltzmann constant and T is the absolute temperature.
Since the given scenario involves an increase in temperature, the average kinetic energy of the gas molecules would also increase. The exact amount of increase can be calculated using the equation above, but it is important to note that the average kinetic energy would not double or become half its value unless the temperature were to change by a factor of two.
Learn more about kinetic energy from the link given below.
https://brainly.com/question/999862
#SPJ4
the equilibrium constant for the following reaction is 1.5×108 at 25∘c . n2(g) 3h2(g)⇌2nh3(g) the value of δg∘ for this reaction is ________ kj/mol
Answers
The calculated value of ΔG° for this reaction is -31.4 kJ/mol which is the answer obtained after calculation. The value of ΔG° for the reaction N2(g) + 3H2(g) ⇌ 2NH3(g) can be calculated using the equation ΔG° = -RT ln(K), where R is the gas constant and T is the temperature in Kelvin. Given that the equilibrium constant (K) is 1.5 × 10^8 at 25°C, the value of ΔG° can be determined by plugging in the values into the equation and solving for ΔG°.
The equilibrium constant (K) for a reaction relates to the concentrations of the reactants and products at equilibrium. In this case, the equilibrium constant is given as 1.5 × 10^8. The value of ΔG°, the standard Gibbs free energy change, can be calculated using the equation ΔG° = -RT ln(K), where R is the gas constant (8.314 J/(mol·K) or 0.008314 kJ/(mol·K)) and T is the temperature in Kelvin. To calculate ΔG°, we first need to convert the temperature from Celsius to Kelvin by adding 273.15. Thus, 25°C = 298.15 K. Now we can substitute the values into the equation:
ΔG° = -RT ln(K)
= -(0.008314 kJ/(mol·K) × 298.15 K) ln(1.5 × 10^8)
Using a calculator or computer program to evaluate the natural logarithm and perform the multiplication, the calculated value of ΔG° is approximately -31.4 kJ/mol. The negative sign indicates that the reaction is exergonic, meaning it releases energy. In this case, the value of ΔG° indicates that the forward reaction (N2 + 3H2 → 2NH3) is favoured at standard conditions (1 atm pressure and 25°C).
To learn more about equilibrium constant, click here: brainly.com/question/31482445
#SPJ11
3. Rank the following acids from most acidic to least acidic. Explain the ranking using the effects that lead to stabilization of the conjugate base. ogleghe он
Answers
Based on the analysis above, we can rank the acids from most acidic to least acidic is:
1. CHCl₂COOH
2. CHF₂COOH
3. CH(CH₃)₂COOH
To rank the acids from most acidic to least acidic, we need to consider the stability of their conjugate bases. A more stable conjugate base indicates a stronger acid. The stability of the conjugate base can be influenced by several factors, including the inductive effect and the resonance effect.
1. CH(CH₃)₂COOH:
The presence of the two methyl groups (–CH₃) on the α-carbon of the carboxylic acid group increases electron density through the inductive effect. This electron-donating effect destabilizes the conjugate base, making it less stable.
2. CHF₂COOH:
The presence of the electronegative fluorine atom (–F) on the α-carbon of the carboxylic acid group withdraws electron density through the inductive effect. This electron-withdrawing effect stabilizes the conjugate base, making it more stable compared to CH(CH₃)₂COOH.
3. CHCl₂COOH:
The presence of the two chlorine atoms (–Cl) on the α-carbon of the carboxylic acid group also withdraws electron density through the inductive effect. This electron-withdrawing effect is stronger than the effect of a single fluorine atom. Therefore, CHCl₂COOH has a more stable conjugate base compared to CHF₂COOH.
Learn more about acid here:
https://brainly.com/question/30086613
#SPJ4
The complete question is:
Rank the following acids from most acidic to least acidic. Explain the ranking using the effects that lead to the stabilization of the conjugate base. CH(CH₃)₂COOH, CHF₂COOH, CHCl₂COOH.
A student failed to carry out all of the procedural steps when doing this experiment. Would the following procedural variations result in an experimentally determined mole ratio of water to salt ? Would it be too low, too high or unaffected? a) the student did not use a dry beaker when obtaining the stock solution b) the student used a wet cuvette when determining the concentration of solution of unknown hydrate c) the student used the wrong wavelength, 430nm, during the measurement of the absorbance of unknown hydrate solution
Answers
The procedural variations described would affect the experimentally determined mole ratio of water to salt. Using a wet beaker would likely result in a lower mole ratio, using a wet cuvette would likely result in a higher mole ratio, and using the wrong wavelength would likely have an unknown effect on the mole ratio.
The procedural variations described would impact the accuracy of the experimentally determined mole ratio of water to salt in different ways.
a) If the student did not use a dry beaker when obtaining the stock solution, it would introduce additional water into the solution, leading to a higher total volume and a lower concentration of the salt. As a result, the mole ratio of water to salt would likely be lower than the actual value.
b) If the student used a wet cuvette when determining the concentration of the solution of unknown hydrate, it would introduce extra water into the solution, causing the recorded absorbance to be higher than it should be. This would lead to an overestimation of the concentration of the hydrate and a higher mole ratio of water to salt.
c) Using the wrong wavelength, 430nm, during the measurement of the absorbance of the unknown hydrate solution can have an unknown effect on the mole ratio. The absorption characteristics of the hydrate may not be accurately captured at this wavelength, leading to an unreliable measurement of absorbance and potentially affecting the calculated mole ratio.
In conclusion, these procedural variations would likely impact the experimentally determined mole ratio of water to salt. Using a wet beaker and wet cuvette would likely result in a lower and higher mole ratio, respectively. Using the wrong wavelength could have an unpredictable effect on the mole ratio, depending on the absorption characteristics of the unknown hydrate at that wavelength.
Learn more about wavelength here: https://brainly.com/question/29398067
#SPJ11
Choose reagents from the table for conversion of 1-butanol to the following substances. Use letters from the table to list reagents in the order used (first at the left). Example: ab Reagents a. NaN3 c. CrO3/H3O+ c. Dess-Martin peropdinane in CH2Cl2 d. Butylamine e. excess NH3
f. SOCl2 g. PBr3 h. Br2/NaOH, H2O i. LiAlH4 H2O j. H2/Ni, i-PrNH2 k. NaBH3CN, (CH3)2NH l. Ag2O, H2O, heat m. NaCN n. H2O, heat o. excess CH3l a) pentlylamine: b) dibutylamine:
Answers
To convert 1-butanol to pentlylamine, the reagents used are [tex]NaN_{3}[/tex], [tex]H_{2} O[/tex], and [tex]NH_{3}[/tex] (in excess), while to convert 1-butanol to dibutyl amine, the reagents used are [tex]SOCl_{2}[/tex] and Butylamine.
To convert 1-butanol to pentlylamine, the reagents would be:
a) [tex]NaN_{3}[/tex](Sodium azide) - to perform azide substitution
b) [tex]H_{2} O[/tex]- for hydrolysis of the azide group
c) [tex]NH_{3}[/tex](Ammonia) in excess - to carry out reductive amination
Therefore, the reagents used in the conversion of 1-butanol to pentlylamine would be a) [tex]NaN_{3}[/tex], b) [tex]H_{2} O[/tex], and c) [tex]NH_{3}[/tex](in excess).
To convert 1-butanol to dibutyl amine, the reagents would be:
a) [tex]SOCl_{2}[/tex](Thionyl chloride) - to perform a nucleophilic substitution
b) Butylamine - to react with the chloride group
Therefore, the reagents used in the conversion of 1-butanol to dibutyl amine would be: a) [tex]SOCl_{2}[/tex]and b) Butylamine.
To know more about "sodium azide", refer to the link given below:
https://brainly.com/question/28379904
#SPJ4
A 20.0 ml sample of 0.115 M sulfurous acid solution is titrated with 0.1014 M KOH. At what added volume of base solution does each equivalence point occur?
Answers
For the volume of KOH required, we can use its concentration: the volume of KOH = moles of KOH / concentration = 0.0046 moles / 0.1014 M≈ 0.0453 L ≈ 45.3 ml. In this titration, a 20.0 ml sample of 0.115 M sulfurous acid solution is titrated with 0.1014 M KOH.
To determine the volumes at which the equivalence points occur, we need to consider the stoichiometry of the reaction between sulfurous acid (H2SO3) and potassium hydroxide (KOH). Since sulfurous acid is a diprotic acid, it can donate two protons per molecule. The balanced equation for the neutralization reaction is: H2SO3 + 2KOH → K2SO3 + 2H2O. From the balanced equation, we can see that for every 1 mole of sulfurous acid, we need 2 moles of KOH to reach the equivalence point. Given that the initial volume of the sulfurous acid solution is 20.0 ml and the concentration is 0.115 M, we can calculate the initial number of moles of sulfurous acid: moles of H2SO3 = volume (in L) × concentration = 20.0 ml × (1 L/1000 ml) × 0.115 M = 0.0023 moles. Since there is a 1:2 stoichiometric ratio between sulfurous acid and KOH, we need 0.0046 moles of KOH to reach the first equivalence point.
To learn more about titration, click here:
brainly.com/question/31483031
#SPJ11
What is the activation energy of 2N2O(g) ---> 2N2(g) + O2(g)? Rate constant: 0.38 s^-1 at 1000 K and 0.87 s^-1 at 1030 K, First order reaction.
Answers
The activation energy of the reaction 2N2O(g) → 2N2(g) + O2(g) is approximately 106 kJ/mol.
To determine the activation energy (Ea) of a reaction, we can use the Arrhenius equation, which relates the rate constant (k) to temperature (T) and the activation energy:
k = A * exp(-Ea / (R * T))
Where:
k = rate constant
A = pre-exponential factor
Ea = activation energy
R = gas constant (8.314 J/(mol·K))
T = temperature in Kelvin
Rate constant at 1000 K (k1) = 0.38 s^-1
Rate constant at 1030 K (k2) = 0.87 s^-1
To find the activation energy, we can take the ratio of the rate constants at two different temperatures and solve for Ea:
k2 / k1 = (A * exp(-Ea / (R * T2))) / (A * exp(-Ea / (R * T1)))
Cancelling out the pre-exponential factor (A) and rearranging the equation:
k2 / k1 = exp((-Ea / (R * T2)) + (Ea / (R * T1)))
Taking the natural logarithm of both sides:
ln(k2 / k1) = -Ea / (R * T2) + Ea / (R * T1)
Rearranging the equation to solve for Ea:
Ea = R * ((1 / T1) - (1 / T2)) / (ln(k2 / k1))
Substituting the given values:
Ea = (8.314 J/(mol·K)) * ((1 / 1000 K) - (1 / 1030 K)) / (ln(0.87 / 0.38))
Converting the units of the gas constant to kJ/mol·K:
Ea ≈ (8.314 × 10^(-3) kJ/(mol·K)) * ((1 / 1000 K) - (1 / 1030 K)) / (ln(0.87 / 0.38))
Calculating the expression:
Ea ≈ 106 kJ/mol
The activation energy of the reaction 2N2O(g) → 2N2(g) + O2(g) is approximately 106 kJ/mol.
To know more about activation , visit:
https://brainly.com/question/1380484
#SPJ11
which class of amines can form intermolecular hydrogen bonds?
Answers
Primary and secondary amines can form intermolecular hydrogen bonds.
How do primary and secondary amines participate in intermolecular hydrogen bonding?Primary and secondary amines, which are a class of organic compounds, can participate in intermolecular hydrogen bonding. Intermolecular hydrogen bonding occurs when the hydrogen atom attached to the nitrogen atom in the amine molecule forms a hydrogen bond with another electronegative atom, such as oxygen or nitrogen, in a neighboring molecule.
Intermolecular hydrogen bonding is a type of attractive force between molecules and plays a crucial role in various chemical and physical properties. In the case of primary and secondary amines, the presence of a hydrogen atom bonded directly to the nitrogen atom allows for the formation of hydrogen bonds with other molecules. These hydrogen bonds enhance the intermolecular forces between the amines, leading to higher boiling points and increased solubility in polar solvents.
The ability of primary and secondary amines to form intermolecular hydrogen bonds is significant in biological systems and organic chemistry reactions. It influences molecular interactions, stability, and the behavior of compounds containing amine functional groups.
Learn more about hydrogen bonding
brainly.com/question/31139478
#SPJ11
in a test tube containing precipitatie of pbcro4 in water: what are the concentraions of lead(II) and chromate ions in equilibrium with the solid? show your calculations. use the Ksp from the prelab table above
Answers
The concentrations of [tex]Pb^{2+}[/tex] and [tex]CrO_4^{2-}[/tex]in equilibrium with the solid [tex]PbCrO_4[/tex] are approximately 5.29 x [tex]10^{-7}\,\text{M}[/tex] .
To determine the concentrations of lead(II) and chromate ions in equilibrium with the solid precipitate [tex]PbCrO_4[/tex], we need to use the solubility product constant (Ksp) for [tex]PbCrO_4[/tex].
The balanced equation for the dissolution of [tex]PbCrO_4[/tex]is:
[tex]PbCrO_4[/tex](s) ↔ [tex]Pb^{2+}(aq) + CrO_4^{2-}(aq)[/tex]
The Ksp expression for [tex]PbCrO_4[/tex]is:
[tex]K_{sp} = [Pb^{2+}][CrO_4^{2-}][/tex]
From the given information, we can assume that the solid precipitate is in equilibrium with the dissolved ions, so we can represent their concentrations as [tex][Pb^{2+}] and [CrO_4^{2-}][/tex], respectively.
Since PbCrO4 is an ionic solid, it dissociates completely in water, meaning that the concentration of [tex]Pb^{2+}[/tex] will be equal to the concentration of[tex]CrO_4^{2-}[/tex].
Let's assume that the concentration of Pb2+ and CrO4^2- ions in equilibrium is x. Therefore, [[tex]Pb^{2+}[/tex]] = [[tex]CrO_4^{2-}[/tex] = x.
Now, substituting these values into the Ksp expression, we get:
Ksp = x × x = x²
From the prelab table, we can find the value of Ksp for [tex]PbCrO_4[/tex]. Let's say the Ksp value is 2.8 x 10^-13 (this value is just an example; please use the appropriate value from your prelab table).
Setting up the equation:
2.8 x [tex]10^{-13} = x^2[/tex]
Taking the square root of both sides:
[tex]\sqrt{2.8 \times 10^{-13}} = \sqrt{x^2}x \approx 5.29 \times 10^{-7}[/tex]
Therefore, the concentrations of Pb2+ and CrO4^2- ions in equilibrium with the solid [tex]PbCrO_4[/tex]are approximately 5.29 x [tex]10^{-7}\,\text{M}[/tex]
To know more about equilibrium, refer to the link:
https://brainly.com/question/19340344
#SPJ4
you add 1.3 kg of ethylene glycol (c2h6o2) antifreeze to 4,692 g of water in your car's radiator. what is the boiling point of the solution? the kb for water is 0.512 °c/m. enter to 2 decimal places.
Answers
The boiling point of the solution is 102.29 °C.
The boiling point of the solution when 1.3 kg of ethylene glycol is added to 4,692 g of water, use the formula ΔTb = kb × m, where ΔTb = change in boiling point, kb = boiling point elevation constant (0.512 °C/m), and m = molality of the solute. We can use the molality formula to find the molality of the solution as:m = moles of solute / kg of solventFirst, we need to convert the mass of ethylene glycol to moles using its molar mass:Molar mass of C2H6O2 = 2 × 12.01 + 6 × 1.01 + 2 × 16.00 = 62.07 g/molNumber of moles of C2H6O2 = mass / molar mass = 1.3 × 10^3 g / 62.07 g/mol = 20.96 molNext, we need to convert the mass of water to kg:Mass of water = 4,692 g = 4.692 kgNow, we can calculate the molality of the solution as:m = 20.96 mol / 4.692 kg = 4.46 mol/kgSubstituting the values into the ΔTb formula:ΔTb = kb × m = 0.512 °C/m × 4.46 mol/kg = 2.29 °CTherefore, the boiling point of the solution is the sum of the boiling point of water (100 °C) and the change in boiling point (2.29 °C):Boiling point of solution = 100.00 + 2.29 = 102.29 °CRounding off to two decimal places, the boiling point of the solution is 102.29 °C.
Learn more about boiling point here:
https://brainly.com/question/2153588
#SPJ11
which of the following produces the value for r2, which is used as a measure of effect size in an independent measures t-test?
Answers
The value of r² is not used as a measure of effect size in an independent measures t-test. Instead, Cohen's d is used as a measure of effect size.
R² is generally used to measure the goodness of fit of a regression model.In an independent measures t-test, Cohen's d is used to determine the size of the difference between the means of two groups.
It is a standardized measure of the difference between the means of two groups, taking into account the variability of the data within each group.
Cohen's d is calculated by subtracting the mean of one group from the mean of the other group, and dividing that difference by the pooled standard deviation of both groups. A larger value of Cohen's d indicates a larger effect size, while a smaller value indicates a smaller effect size.
To know more about t-test refer here: https://brainly.com/question/1189751#
#SPJ11
identify the spectator ions in this reaction. check all that apply. 2h co32– 2na 2oh– 2na co32– 2h2o h co32– na oh– 2h2o
Answers
In the given reaction: 2H+ + CO32- + 2Na+ + 2OH- -> 2Na+ + CO32- + 2H2O, the spectator ions can be identified by examining which ions remain unchanged throughout the reaction.
Spectator ions are present in the reaction mixture but do not undergo any chemical change. Instead, they remain as ions on both sides of the equation. In this case, the Na+ and CO32- ions are present on both the reactant and product sides of the equation. Therefore, they are spectator ions. When the reaction occurs, the H+ and OH- ions combine to form water (H2O). The CO32- ion remains unchanged and does not participate in any chemical transformation. The Na+ ion also remains unchanged and is found on both sides of the equation. Spectator ions do not affect the overall outcome or result of the reaction. They are simply present to maintain charge balance. Therefore, in the given reaction, the spectator ions are Na+ and CO32-.
Learn more about reaction here : brainly.com/question/30464598
#SPJ11
consider the reaction 2c(graphite) h2(g) ⇄ c2h2 (g) δg° = 209.2 kj at 25 °c. calculate δg at 25°c for the reaction when p(h2) = 100 atm and p(c2h2) = 0.10 atm.
Answers
209.2 is δg at 25°c fοr the reactiοn when p(H₂) = 100 atm and p(C₂H₂) = 0.10 atm.
Graphite is a substance οf what kind?An οrganic mineral that is derived frοm carbοn is called graphite. It is a naturally οccurring element that is frequently prοduced by sedimentary carbοn cοmpοunds, but it can alsο be fοund in magma, certain rοcks that cοntain οrganic carbοn, and as a byprοduct οf the reductiοn οf sedimentary carbοn thrοugh the reductiοn οf carbοnates.
A thermοdynamic system's enthalpy, which is οne οf its prοperties, is calculated by multiplying the vοlume and pressure οf the system by their cοmbined pressure and vοlume. It is a state functiοn that is frequently emplοyed in measurements οf chemical, biοlοgical, and physical systems at cοnstant pressure, which is cοnveniently prοvided by the substantial ambient envirοnment.
2C + H₂-> C₂H₂
(ΔH) reactiοn = (ΔH) prοduct - (ΔH) reactants
(ΔH) reactiοn = (ΔH) C₂H₂- ((ΔH) C + (ΔH) H₂)
(ΔH) C and (ΔH) H₂have zerο value as fοr free element, (ΔH) is zerο
Frοm the available data: Hf (kJ / mοl) C₂ H₂(g)= 209.2
(ΔH) reactiοn = ΔH) C₂H₂ - ((ΔH) C + (ΔH) H₂)
(ΔH) reactiοn = 209.2 - (0 + 0) = 209.2
To learn more about enthalpy :
https://brainly.com/question/30431725
#SPJ4
(9%) Problem 10: In Bohr's model of a Hyodrogen atom, electrons move in orbits labeled by the quantum number n. Randomized Variables Find the radius, in meters of the orbit of an electron around a Hydrogen atom in the n = 4 state according to Bohr's theory. E sin cos taní) cotan asino acos atan acotan sinho cosho tanho cotanho Degrees O Radians 78 9 456 1 2 3 0 VODARICA + . 0
Answers
According to Bohr's model of the hydrogen atom, the radius of the electron's orbit in the n = 4 state is approximately 8.464 meters.
The radius of the orbit of an electron around a hydrogen atom in the n = 4 state, according to Bohr's model, can be determined using the formula r = (0.529 * n^2) / Z, where r represents the radius, n is the quantum number, and Z is the atomic number of the nucleus (in this case, Z = 1 for hydrogen).
Substituting the values into the formula:
r = (0.529 * 4^2) / 1
r = (0.529 * 16) / 1
r = 8.464 meters
Therefore, the radius of the electron's orbit around a hydrogen atom in the n = 4 state, based on Bohr's theory, is approximately 8.464 meters.
According to Bohr's model of the hydrogen atom, the radius of the electron's orbit in the n = 4 state is approximately 8.464 meters. This model suggests that electrons occupy specific energy levels and move in circular orbits around the nucleus. However, it is important to note that Bohr's model is a simplified representation and has limitations in describing the behavior of electrons in atom.
To know more about Bohr's model visit:
brainly.com/question/11891941
#SPJ11
Why do we measure resistivity instead of resistance to verify metal deposition (for thermal evaporation)?
Answers
Measuring resistivity provides a standardized and comparable value for different samples and materials, enabling better comparisons and analysis of the deposited metal layers.
We measure resistivity instead of resistance to verify metal deposition during thermal evaporation because resistivity is a material property that provides a more accurate and reliable measurement of the electrical conductivity of a material, including thin films or coatings.
Resistance (R) is a measure of how much a material opposes the flow of electric current and is influenced by both the resistivity (ρ) of the material and its dimensions (length and cross-sectional area) according to the formula R = ρ × (L/A), where L is the length and A is the cross-sectional area.
When measuring resistance alone, it can be challenging to isolate the contribution of the deposited metal layer from other factors such as the substrate's resistance or the contact resistance at the interfaces. These additional resistances can affect the overall measured resistance and make it difficult to accurately determine the characteristics of the deposited metal layer.
On the other hand, resistivity is an intrinsic property of a material that depends only on its composition and temperature. By measuring the resistivity (ρ) of the deposited metal layer, we can eliminate the influence of substrate resistance and contact resistances. This allows us to obtain a more precise measurement of the electrical conductivity and quality of the metal deposition process.
Learn more about Resistivity from the link given below.
https://brainly.com/question/29427458
#SPJ4
calculate the equilibrium constant at 25°c from the free-energy change for the following reaction: substance (kj/mol) 65.52 –147.0 –78.87 77.12 (enter your answer to two significant figures.)
Answers
The equilibrium constant (K) at 25°C, based on the given free-energy change, is approximately 9.74.
To calculate the equilibrium constant (K) at 25°C from the free-energy change (ΔG) for a reaction, we can use the equation:
ΔG = -RT ln(K)
Where; ΔG is the free-energy change
R is the gas constant (8.314 J/(mol·K))
T is the temperature in Kelvin
K is the equilibrium constant
Given the free-energy change for the reaction is 77.12 kJ/mol, we need to convert it to joules and Kelvin:
ΔG = 77.12 kJ/mol × 1000 J/kJ
= 77120 J/mol
T = 25°C + 273.15 K = 298.15 K
Now, we can calculate the equilibrium constant (K):
K = [tex]e^{(-ΔG/RT)}[/tex]
K =[tex]e^{(-77120J/mol}[/tex] / (8.314 J/(mol·K) × 298.15 K))
K ≈ [tex]e^{(-31.024)}[/tex]
K ≈ 9.74
Therefore, the equilibrium constant (K) is approximately 9.74 (rounded to two significant figures).
To know more about equilibrium constant here
https://brainly.com/question/30620209
#SPJ4
a solution with a ph of 2 has how many more hydrogen ions (h ) in it than a solution with a ph of 4? group of answer choices 5 times more because each ph unit represents a 5x difference in hydrogen ion concentration 10 times more because each ph unit represents a 10x difference in hydrogen ion concentration 100 times more because each ph unit represents a 10x difference in hydrogen ion concentration 1000 times more because each ph unit represents a 1000x difference in hydrogen ion concentration
Answers
The correct answer is 100 times more because each pH unit represents a 10x difference in hydrogen ion concentration.
The pH scale is logarithmic, meaning that each unit change in pH represents a tenfold difference in the concentration of hydrogen ions (H⁺).
For example, a solution with a pH of 2 has a concentration of H+ ions that is 10 times higher than a solution with a pH of 3. Similarly, a solution with a pH of 2 has a concentration of H+ ions that is 100 times higher than a solution with a pH of 4.
Therefore, a solution with a pH of 2 has 100 times more hydrogen ions (H⁺) than a solution with a pH of 4.
To know more about the pH unit refer here :
https://brainly.com/question/32469080#
#SPJ11
what si the ratio of glyceraldehyde-3-phosphate gap to dihydroxyacetone phosphate
Answers
Glyceraldehyde-3-phosphate (GAP) and dihydroxyacetone phosphate (DHAP) are two isomers of the glycolytic intermediate in cells. The ratio of GAP to DHAP is 1:1 at equilibrium conditions, but it varies significantly under nonequilibrium conditions, such as in the presence of enzymes.
Under such conditions, the GAP to DHAP dihydroxyacetone phosphate ratio can vary between 3:1 and 20:1.The two molecules, GAP and DHAP, interconvert rapidly, and thus, they exist in a rapid equilibrium in cells. In cells, DHAP is an intermediate in glycolysis, and it is converted to GAP by the enzyme triose phosphate isomerase (TPI). The interconversion of GAP to DHAP by TPI is a reversible reaction and is known to be near-equilibrium. However, in glycolysis, the DHAP is typically rapidly utilized by an enzyme called aldolase, such that the DHAP concentration remains low relative to the GAP concentration, which accumulates. Therefore, the ratio of [GAP]:[DHAP] is typically greater than 1:1 under nonequilibrium conditions.Glyceraldehyde-3-phosphate (GAP) and dihydroxyacetone phosphate (DHAP) are two isomers of the glycolytic intermediate in cells. The ratio of GAP to DHAP is 1:1 at equilibrium conditions, but it varies significantly under nonequilibrium conditions, such as in the presence of enzymes. Under such conditions, the GAP to DHAP ratio can vary between 3:1 and 20:1.The two molecules, GAP and DHAP, interconvert rapidly, and thus, they exist in a rapid equilibrium in cells. In cells, DHAP is an intermediate in glycolysis, and it is converted to GAP by the enzyme triose phosphate isomerase (TPI). The interconversion of GAP to DHAP by TPI is a reversible reaction and is known to be near-equilibrium. However, in glycolysis, the DHAP is typically rapidly utilized by an enzyme called aldolase, such that the DHAP concentration remains low relative to the GAP concentration, which accumulates. Therefore, the ratio of [GAP]:[DHAP] is typically greater than 1:1 under nonequilibrium conditions.
learn more about dihydroxyacetone phosphate Refer: https://brainly.com/question/13077675
#SPJ11
complete question: What is the ratio of glyceraldehyde-3-phosphate (GAP) to dihydroxyacetone phosphate (DHAP) in cells at 37 ∘ C under nonequilibrium conditions? [GAP]:[DHAP]= __:1
Which pairs are isomers? CH3CH2CH2CH3 and CH3CH(CH3)CH2CH3. CH3CH(CH3)CH2CH2CH2CH2CH2CH2CH3 and CH3CH2CH2CH2CH(CH2CH2CH3)CH2CH3. CH3CH2CH2CH2CH2CH3 and CH3CH2CH(CH3)CH2CH2CH3. CH3CH(CH3)CH2CH2CH(CH3)CH3 and CH3CH2CH2CH2CH2CH2CH2CH3. CH3CH(CH3)CH2CH3 and CH3CH2CH2CH2CH3
Answers
The pairs of compounds that are isomers are: CH3CH2CH2CH3 and CH3CH(CH3)CH2CH3, CH3CH2CH2CH2CH(CH2CH2CH3)CH2CH3 and CH3CH2CH2CH2CH2CH3, CH3CH2CH(CH3)CH2CH2CH3 and CH3CH(CH3)CH2CH2CH(CH3)CH3.
Isomers are the molecules which have the same molecular formula but differ in the arrangement of their atoms. The following pairs of compounds are isomers: CH3CH2CH2CH3 and CH3CH(CH3)CH2CH3.CH3CH2CH2CH2CH(CH2CH2CH3)CH2CH3 and CH3CH2CH2CH2CH2CH3.CH3CH2CH(CH3)CH2CH2CH3 and CH3CH(CH3)CH2CH2CH(CH3)CH3.In the first pair of compounds, the molecule on the left is n-butane, while the molecule on the right is 2-methylpropane or isobutane. They are isomers because both have the same molecular formula C4H10, but different structures.2. In the second pair of compounds, the molecule on the left is octane, while the molecule on the right is 2-methylheptane.
These compounds have the same molecular formula, C8H18, but different structures.3. In the third pair of compounds, the molecule on the left is 2-methylpentane, while the molecule on the right is 3-methylpentane.
They are isomers because they have the same molecular formula C6H14, but different structures.4.
In the fourth pair of compounds, the molecule on the left is 2,3-dimethylbutane, while the molecule on the right is 2,4-dimethylpentane.
They are isomers because they have the same molecular formula C8H18, but different structures.5. In the fifth pair of compounds, the molecule on the left is isopropyl group, while the molecule on the right is n-propyl group.
They are isomers because they have the same molecular formula C3H7, but different structures.
In conclusion, the pairs of compounds that are isomers are: CH3CH2CH2CH3 and CH3CH(CH3)CH2CH3, CH3CH2CH2CH2CH(CH2CH2CH3)CH2CH3 and CH3CH2CH2CH2CH2CH3, CH3CH2CH(CH3)CH2CH2CH3 and CH3CH(CH3)CH2CH2CH(CH3)CH3.
To know more about isomers visit:
brainly.com/question/32508297
#SPJ11
In the nuclear transmutation represented by Pu(He,n), what is the product? A. uranium-242 B. curium-245 C. curium-242 D. uranium-245 E. uranium-243
Answers
Pu(He,n) represents a nuclear transmutation, which is a nuclear reaction in which an atomic nucleus is transformed into another element or a different isotope of the same element.
In this reaction, a helium nucleus (He) is bombarded at the nucleus of plutonium-239 (Pu), leading to the formation of a new element.The product formed from the nuclear transmutation represented by Pu(He,n) is curium-242. Therefore, the correct option is C.The reaction can be represented as follows:$$\ce{^{239}_{94}Pu + ^4_2He -> ^{242}_{96}Cm + n}$$The symbol n represents a neutron, which is also produced in this reaction. Curium-242 is a radioactive isotope of curium, a synthetic element that was first produced in 1944 by Glenn T. Seaborg, Ralph A. James, and Albert Ghiorso at the University of California, Berkeley.
Learn more about nuclear transmutation here:
https://brainly.com/question/30078683
#SPJ11
.An ideal gas in a sealed piston is allowed to expand isothermally and reversibly against an external pressure of 1.0 atm. What can be said of the change in the entropy of the surroundings, ΔSsurr, for this process?
a) ΔSsurr > 0
b) ΔSsurr = 0
c) ΔSsurr < 0
Answers
since the process is reversible, we can determine the change in the entropy of the gas using the ideal gas law, PV = nRT, and the equation ΔS = nR ln (Vf/Vi). It can be observed that ΔSgas > 0, since the volume increases, while the temperature remains constant. Therefore, the total entropy change, ΔStotal = ΔSgas + ΔSsurr, is greater than zero. a) ΔSsurr > 0.
An ideal gas in a sealed piston is allowed to expand isothermally and reversibly against an external pressure of 1.0 atm. The ideal gas in a sealed piston is allowed to expand isothermally and reversibly against an external pressure of 1.0 atm, and we are required to identify the change in the entropy of the surroundings, ΔSsurr, for this process. ΔSsurr will be greater than zero. This is because, during an isothermal expansion process, the external pressure is lower than the pressure of the gas inside the container. As a result, the gas expands, doing work on the surroundings. Work is done by the gas, but the heat is transferred to and from the surroundings.
The magnitude of the heat transferred to the surroundings is equal to the magnitude of the work done by the gas, and the sign of the work done is negative because the gas expands and performs work on the surroundings. As a result, the heat transferred to the surroundings is positive, indicating that the entropy of the surroundings increases, which implies that ΔSsurr is greater than zero.
In addition, since the process is reversible, we can determine the change in the entropy of the gas using the ideal gas law, PV = nRT, and the equation ΔS = nR ln (Vf/Vi). It can be observed that ΔSgas > 0, since the volume increases, while the temperature remains constant. Therefore, the total entropy change, ΔStotal = ΔSgas + ΔSsurr, is greater than zero. a) ΔSsurr > 0.
know more about entropy
https://brainly.com/question/32167470
#SPJ11
It is far more difficult to make a perfect copy of an analog wave because a. ) analog waves travel at speeds too great for modern Technologies to use. B. )the exact value of any one piece of information is not clearly defined. C. ) each individual piece of information is either a 0, a one, or a two. D. ) most analog waves have wavelengths that are too long to reproduce in copies
Answers
The reason why it is far more difficult to make a perfect copy of an analog wave is that the exact value of any one piece of information is not clearly defined. Digital waves are exact, while analog waves have to be reproduced with the closest approximation, leading to errors.
It is far more difficult to make a perfect copy of an analog wave because the exact value of any one piece of information is not clearly defined. Analog waves are continuous, and the waves vary, depending on the medium carrying the wave. Unlike digital waves, which are exact and do not change with the medium, analog waves have to be reproduced to the closest approximation, leading to errors. The process of reproducing analog waves with the help of digital equipment is known as sampling.
However, it is difficult to produce a precise copy of analog waves through this process, as the approximation is not exact and may have errors. Thus, the replication of analog waves is challenging and requires advanced technology.
: The reason why it is far more difficult to make a perfect copy of an analog wave is that the exact value of any one piece of information is not clearly defined. Digital waves are exact, while analog waves have to be reproduced with the closest approximation, leading to errors. The process of reproducing analog waves with the help of digital equipment is known as sampling, but the approximation is not exact, leading to difficulty in replicating analog waves.
To know more about Digital waves visit:
brainly.com/question/23749502
#SPJ11
how many individual hydroxide ions (oh-) are found in 24.39 ml?
Answers
Answer: There are 1.47 x 10^21 individual hydroxide ions (OH-) in 24.39 ml of 0.1 M OH- solution.
Explanation : The number of individual hydroxide ions (OH-) in 24.39 ml can be determined using the Avogadro's number, which is 6.022 x 10^23 particles per mole. However, the Avogadro's number is not directly used in this calculation. Instead, the concentration of the hydroxide ions is required. The concentration of OH- ions is commonly expressed in molarity (M), which is the number of moles of OH- ions per liter of solution (mol/L).Molarity = moles of solute / volume of solution (in liters)To calculate the number of individual hydroxide ions (OH-) in a given volume of solution, follow these steps:
1. Determine the concentration of the OH- ions in the solution. For example, if the concentration is 0.1 M, this means there are 0.1 moles of OH- ions per liter of solution.
2. Convert the volume of solution to liters. In this case, 24.39 ml is equivalent to 0.02439 L.3. Use the molarity equation to calculate the number of moles of OH- ions present in the solution:moles of OH- ions = molarity x volume of solution (in liters)moles of OH- ions = 0.1 M x 0.02439 L = 0.002439 mol4. Finally, use Avogadro's number to convert the number of moles to the number of individual hydroxide ions:individual hydroxide ions = moles of OH- ions x Avogadro's numberindividual hydroxide ions = 0.002439 mol x 6.022 x 10^23 = 1.47 x 10^21Therefore, there are 1.47 x 10^21 individual hydroxide ions (OH-) in 24.39 ml of 0.1 M OH- solution.
Learn more about hydroxide ions here https://brainly.in/question/40082659
#SPJ11
In a sealed and rigid container, a sample of gas at 4.40 atm and 60.0
°C is cooled to 20.0 °C. What is the pressure (in atm) of the gas at
20.0 °C?
Answers
Explanation:
To find the pressure of the gas at 20.0 °C, we can use the combined gas law, which states:
(P1 * V1) / (T1) = (P2 * V2) / (T2)
Where:
P1 = Initial pressure
V1 = Initial volume
T1 = Initial temperature
P2 = Final pressure (what we're trying to find)
V2 = Final volume (assuming the volume remains constant)
T2 = Final temperature
Given:
P1 = 4.40 atm
T1 = 60.0 °C = 333.15 K (converting to Kelvin)
T2 = 20.0 °C = 293.15 K (converting to Kelvin)
Since the volume is assumed to remain constant (rigid container), we can simplify the equation as follows:
P1 / T1 = P2 / T2
Now, we can substitute the given values and solve for P2:
(4.40 atm) / (333.15 K) = P2 / (293.15 K)
Cross-multiplying:
P2 = (4.40 atm) * (293.15 K) / (333.15 K)
≈ 3.874 atm
Therefore, the pressure of the gas at 20.0 °C is approximately 3.874 atm.
.Consider the titration of 50.0 mL of 0.116 M NaOH with 0.0750 M HCl. Calculate the pH after the addition of each of the following volumes of acid: Part A 5.0 mL Express your answer using four significant figures.
Answers
The pH after adding 5.0 mL of 0.0750 M HCl is approximately 12.994.
To calculate the pH after the addition of 5.0 mL of 0.0750 M HCl, we need to determine the number of moles of HCl added and the resulting concentration of OH- ions in the solution.
Given:
Initial volume of NaOH = 50.0 mL
Initial concentration of NaOH = 0.116 M
Volume of HCl added = 5.0 mL
Concentration of HCl = 0.0750 M
First, we need to determine the moles of HCl added:
Moles of HCl = Volume of HCl added * Concentration of HCl
Moles of HCl = 5.0 mL * 0.0750 M = 0.375 mmol
Since HCl is a strong acid and NaOH is a strong base, they react in a 1:1 stoichiometric ratio. Therefore, the moles of OH- ions neutralized by the added HCl is also 0.375 mmol.
Now, we calculate the moles of OH- ions remaining from the initial NaOH solution:
Moles of NaOH = Initial volume of NaOH * Initial concentration of NaOH
Moles of NaOH = 50.0 mL * 0.116 M = 5.8 mmol
Moles of OH- remaining = Moles of NaOH - Moles of OH- neutralized
Moles of OH- remaining = 5.8 mmol - 0.375 mmol = 5.425 mmol
Next, we calculate the concentration of OH- ions in the solution:
OH- concentration = Moles of OH- remaining / Total volume of solution
Total volume of solution = Initial volume of NaOH + Volume of HCl added
Total volume of solution = 50.0 mL + 5.0 mL = 55.0 mL = 0.055 L
OH- concentration = 5.425 mmol / 0.055 L = 98.64 mM
Finally, we can calculate the pOH and pH of the solution:
pOH = -log10(OH- concentration)
[tex]pOH = -log10(98.64 x 10^-3) =1.006[/tex]
pH = 14 - pOH
pH = 14 - 1.006 ≈ 12.994
Therefore, the pH after the addition of 5.0 mL of 0.0750 M HCl is approximately 12.994.
Learn more about the pH here:
https://brainly.com/question/12609985
#SPJ4
1. What precautions should you take when working with: (a) ethyl ether? (b) 25% sodium methoxide in methanol? 2. What is the purpose of the toluene in the reaction for forming the ethylene ketal in Synthesis 3? 3. Calculate the theoretical yield for each of the three syntheses. Use the amount of starting material listed in the Reagents and Properties table for each synthesis; that is, aldol condensation product from p-anisaldehyde, Michael addition product from aldol condensation product, and ethylene ketal product from Michael addition product. [Note: Determine the limit-ing reagent in Synthesis 1.] 4. Calculate the overall theoretical yield for the sequence, p-anisaldehyde to the ethylene ketal.
Answers
The theoretical yield = (0.08 mol x 0.08 mol x 0.08 mol) = 0.000512 mol or 0.059 g. The overall theoretical yield of the reaction sequence is 0.059 g.
(a) Precautions while working with ethyl ether: Ethyl ether is an extremely flammable liquid with a low boiling point. Therefore, it should be kept away from heat, sparks, or flames. To reduce the risk of ignition, all electrical equipment should be explosion-proof. To avoid inhalation of the fumes, all operations should be carried out in a well-ventilated location. Wear gloves to avoid skin contact. (b) Precautions while working with 25% sodium methoxide in methanol: Because sodium methoxide is a strong base, it is corrosive. Sodium methoxide should be stored in a well-ventilated area and kept away from moisture and air. Before handling, always wear protective gear such as gloves, goggles, and a lab coat. Ingestion or inhalation of sodium methoxide or its fumes should be avoided.
The purpose of toluene in the reaction of forming the ethylene ketal in Synthesis 3 is to form an azeotrope with water, which helps to eliminate water from the reaction mixture, allowing for the reaction to proceed. Toluene was used in the reaction as an azeotropic distilling solvent to eliminate water, which is produced in the reaction.
Limiting reagent in Synthesis 1: To determine the limiting reagent, we must first identify the reactants' stoichiometry, which is 1:1. As a result, the limiting reagent will be the reactant with the least number of moles.
Theoretical yield for each synthesis:
Overall theoretical yield for the sequence, p-anisaldehyde to the ethylene ketal:
The overall theoretical yield of the reaction sequence is determined by multiplying the theoretical yield of each synthesis.
As a result: Overall theoretical yield = (0.08 mol x 0.08 mol x 0.08 mol) = 0.000512 mol or 0.059 g. Answer: The overall theoretical yield of the reaction sequence is 0.059 g.
know more about theoretical yield
https://brainly.com/question/14966377
#SPJ11
When solid zinc is added to hydrochloric acid, the products are hydrogen gas and an aqueeous solution of zinc chloride. You could feel the test tube get hot. Sketch the energy graph that represents the chemical energy within this reaction. In addition, state whether this reaction is endothermic or exothermic.
Answers
The energy graph for the reaction between solid zinc and hydrochloric acid would show a decrease in energy as the reaction proceeds. This reaction is exothermic, releasing energy in the form of heat.
When solid zinc (Zn) is added to hydrochloric acid (HCl), a redox reaction takes place. The zinc atoms lose electrons, oxidizing to Zn2+ ions, while the hydrogen ions from the acid gain electrons, reducing to form hydrogen gas (H2). The reaction can be represented by the following equation:
[tex]Zn(s) + 2HCl(aq) - > ZnCl_2(aq) + H_2(g)[/tex]
The energy graph for this reaction would show a decrease in energy as the reaction proceeds from the reactants (solid zinc and hydrochloric acid) to the products (aqueous zinc chloride and hydrogen gas). This decrease in energy represents the release of energy during the reaction.
The fact that you could feel the test tube getting hot indicates that the reaction is exothermic. Exothermic reactions release energy in the form of heat, resulting in an increase in temperature. In this case, the heat is generated as a result of the chemical reaction between zinc and hydrochloric acid, indicating that the reaction is exothermic.
Learn more about exothermic here:
https://brainly.com/question/4345448
#SPJ11
for the reaction: agi(s) br2(g) → agbr(s) i2(s) δh° = –54.0 kj δhf° for agbr(s) = –100.4 kj/mol δhf° for br2(g) = 30.9 kj/mol the value of δhf° for agi(s) is: group of answer choices
Answers
The value of ΔHf° for AgI(s) is 13.1 kJ/mol.
Hess's law states that the enthalpy change of a reaction is independent of the route taken provided that the initial and final conditions are the same. For example, the heat energy that flows when calcium oxide (quicklime) reacts with water to produce calcium hydroxide (slaked lime) is the same whether we proceed directly or indirectly.
The standard enthalpy of formation, also known as ΔHf°, is the amount of heat absorbed or released when one mole of a substance is created from its constituent elements in their standard states.
This means that all reactants and products must be in their standard states at the time of the reaction.The standard enthalpy of formation of AgBr(s) is -100.4 kJ/mol, while that of Br2(g) is 30.9 kJ/mol.
The reaction is written as follows:Agi(s) + Br₂(g) → AgBr(s) I2(s) δH° = -54.0 kJ
Let's start with Hess's Law:ΔHf° of AgBr(s) + ΔHf° of I2(s) → ΔHf° of AgI(s) + ΔH° 1
We'll need to change the sign of ΔHf° for AgBr(s) because it is on the product side:
ΔHf° of AgI(s) = ΔHf° of AgBr(s) + ΔHf° of I2(s) + ΔH° 1
Inserting the data from the issue:ΔHf° of AgI(s) = -100.4 kJ/mol + 13.1 kJ/mol - (-54.0 kJ/mol)ΔHf° of AgI(s) = 13.1 kJ/mol + 45.6 kJ/mol
ΔHf° of AgI(s) = 58.7 kJ/mol or 59 kJ/mol rounded off to one significant figure.
To know more about Hess's law click on below link:
https://brainly.com/question/10504932#
#SPJ11