Answer:
a: solid
b: liquid
c: liquid
d: gas
e: gas
f: liquid
Explanation:
According to the forces of attraction, the states of matter in each case serially are as follows: solid, liquid,liquid,gas,gas and liquid respectively.
What is matter?Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it has volume .Matter is composed up of atoms which may or not be of same type.
Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states such as solids, liquids and gases depending on the conditions of temperature and pressure.
The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.Matter can neither be created nor destroyed rather is conserved at end of chemical change.
Learn more about matter,here:
https://brainly.com/question/12972782
#SPJ2
What is the resultant of the vectors shown?
Answer:
b
Explanation:
your welcome :)
incline plane is given length 12m,load 600 newton,effort 200 Newton, Height 3 metre find its velocity ratio and mechanical advantage
Answer:
i. The velocity ratio of the plane is 4.
ii. The mechanical advantage of the plane is 3.
Explanation:
i. The velocity ratio (VR) of an inclined plane is ratio of its length to the height. It is given as;
VR = [tex]\frac{length of the plane}{height}[/tex] = [tex]\frac{l}{h}[/tex]
Given: l = 12 m, L = 600 N, E = 200 N, h = 3 m.
So that,
VR = [tex]\frac{12}{3}[/tex]
= 4
The velocity ratio of the plane is 4.
ii. Mechanical advantage (MA) expresses the relationship between the load overcome to effort applied.
MA = [tex]\frac{Load}{Effort}[/tex] = [tex]\frac{L}{E}[/tex]
= [tex]\frac{600}{200}[/tex]
= 3
The mechanical advantage of the plane is 3.
Therefore, the velocity ratio of the inclined plane is 4, and its mechanical advantage is 3.
Which refers to the thermal energy that flows from one substance to another when the substances differ in
emperature?
Answer:
Heat
Explanation: The state in which no thermal energy transfer occurs because both substances are at the same temperature.
Answer:
A: Heat
I hope this helps
please help meeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Answer:
try finding on a website
Explanation:
why the spinner of a washing machine is made to spin at a very high speed
Answer:
Once rinsed, the inner drum starts to spin at high speed to remove any remaining water. This water goes out through the small holes in the inner drum into the outer drum before the pump removes any remaining water, and your clothes are ready to be taken out to dry
4. A 5.00-kg sled starts at rest and accelerates down a 45.0° incline. The coefficient of
kinetic friction between the mass and the incline is .185.
a) What is the value of the of the acceleration of the sled
Answer: [tex]5.64\ m/s^2[/tex]
Explanation:
Given
mass of sled m=5 kg
Elevation [tex]\theta =45^{\circ}[/tex]
[tex]\mu _k=0.185[/tex] (coefficient of kinetic friction)
Friction will oppose the motion of the sled while sled weight sin component helps it to move down the incline
[tex]W\sin\theta-F_r=ma\\where\\W=weight(mg)\\F_r=Friction(\mu_kmg\cos\theta)\\a=acceleration[/tex]
Substituting values
[tex]mg\sin \theta-\mu_kmgcos\theta=ma\\g\sin \theta-\mu_kg\cos \theta=a\\a=g(\sin 45^{\circ}-0.185\times \cos 45^{\circ})\\a=5.64\ m/s^2[/tex]
where should i graph the distance in a distance time graph
Answer:
Distance in Y axis and Time in axis
Answer:
the distance should be on the Y axis (vertical) and the time should be on the X axis (horizantial)
Hi guys . I'm having some troubles with physics and chemistry .
Do you know any sites or apps that can help me with any topic in physics and chemistry ( apart from Khan academy ) ?
Note : The site or app has to be able to teach and explain topics in Physics and Chemistry .
Answer:
physics and math tutor
Save my exams
Explanation:
hii! for PTM(physics and math tutor) you simply type in the search bar for example in. physics Units and measurements past papers.Then the first option would be PTM(physics and math tutor) and you click on it and it would give you on the left side Revision Notes, flashcards and practice questions. This site has helped me so much and I hope this helps you too (by the way PTM has for all 3 sciences and math too) just simply type the lesson name along with past paper and click on the first link and you'll get yourself your answers!!!! hopefully this helps!:))
friction that resists the motion between two objects that are not moving
Answer:
static friction is the friction that resists the motion between two objects that are not moving
25)
Which example is NOT a part of the electromagnetic spectrum?
A)
microwaves
B)
radio waves
electricity
D)
purple light
Answer:
radio waves electricity
When a cricket ball is thrown vertically upwards, it reaches a maximum height of 15 metres. (a) What was the initial speed of the ball ? (b) How much time is taken by the ball to reach the highest point ? (g=10 ms -2
Answer:
The velocity of the cricket ball is 17.32 m/s
Time is taken by the ball to reach the highest point = 0.8660 seconds
Explanation:
The cricket ball can be seen and treated as a projectile in this case
The maximum height attained by a projectile in motion can be calculated using the formula:
[tex]h = \frac{v^2 sin^2 \theta }{2g}[/tex]
In any projectile problem, once we know see that the object was released vertically upwards, we need to know that this means that the angle of projection is 90 degrees, and sin 90 is = 1
hence, h will be modified to become
[tex]h = \frac{v^2 }{2g}[/tex]
[tex]v = \sqrt{2gh}[/tex]
We are given that h = 15m and g = 10m/s2
[tex]v = \sqrt{2 \times 10 \times 15} = 17.32m/s[/tex]
The velocity of the cricket ball is 17.32 m/s
B. We can get the time it took to reach the highest point by dividing
time = distance/speed
Time = 15/17.32 = 0.8660 seconds
In the picture above, if the cue stick strikes the 0.2-kg cue ball with a force of 1.1 N, what will be the acceleration of the cue ball?
Answer:
0.55 m/s².
Explanation:
From the question given above, the following data were obtained:
Mass (m) of ball = 2 Kg
Force (F) applied = 1.1 N
Acceleration (a) =?
Force (F) is defined as the product of mass (m) and acceleration (a). Mathematically, the force (F) can be represented as:
Force (F) = mass (m) × acceleration (a)
F = ma
With the above formula, we can calculate the acceleration of the ball as follow:
Mass (m) of ball = 2 Kg
Force (F) applied = 1.1 N
Acceleration (a) =?
F = ma
1.1 = 2 × a
Divide both side by 2
a = 1.1 / 2
a = 0.55 m/s²
Therefore, the acceleration of the ball is 0.55 m/s²
A chef fills 50cm3 container with 250g of cooking oil what is the density of the oil?
Given that,
Mass, m = 250 g
Volume of the container, V = 50 cm³
To find,
The density of the oil.
Solution,
Density = mass/ volume
The computation for density is as follows :
[tex]\rho =\dfrac{m}{V}\\\\\rho =\dfrac{250\ g}{50\ cm^3}\\\\=5\ g/cm^3[/tex]
So, the density of the oil is [tex]5\ g/cm^3[/tex].
Which type of wave has the longest wavelength?
Gamma rays
Ultraviolet rays
Visible light
Microwaves
Radio waves
Answer:
Radio Waves
Explanation:
You go outside on a bright, warm day, How can you tell that you are absorbing radiant energy from the sun?
Answer:
you start sweating and it would get hot
Please help me I’ll mark brainliest
TRUE OR FALSE: some rays of light carry radiation.
Answer:
true
Explanation:
Answer:
True
Explanation:
a camel can walk easily on sandy desert but a horse cannot, why?
plz anyone tell
Answer:
I believe the camels hooves or whatever are built diffrenet.
Explanation:
Energy energy can be transferred from one form to another we use many Indrajeet Converse in our daily life observe carefully to find these energy conversion your home make a list of any ten convert including their names along with their energy chains
Answer:
Find the list below.
Explanation:
Energy conversion imply the transformation of energy from one form to another. Examples of these conversions in my home include the following:
1. Chemical energy stored in food is converted to mechanical energy used in working(example sweeping)
2. Chemical energy stored in batteries are used to produce sound energy from the radio.
3. Electrical energy flowing through the wires are used to provide heat energy from the heating device.
4. Electric energy stored in the fan is converted to kinetic energy.
5. Chemical energy stored in petrol is converted to mechanical and electrical energies in the generator.
6. Electric energy supplied by the electric gas cooker is used to generate thermal energy after heating water.
7. Electrical energy flowing through the wires supply light energy in the bulbs.
8. Electric energy is converted to light and sound energy in the televisions.
9. Light energy from the sun is converted to chemical energy in the plants at the garden.
10. Electric energy is converted to sound and light energy in the kitchen blender.
A laser beam is directed at the Moon, 380,000 km from the Earth. The beam diverges at an angle of \thetaθ of 0.8 x 10-5 rad. What diameter spot, in m, will it make on the Moon?
Answer:
3040 m
Explanation:
The formula to apply here is ;
d=∅*r where
d is the diameter of the spot , ?
∅ is angle of divergence in radians, = 0.8 * 10⁻⁵rad
r is distance of Moon from Earth, =380,000 km
Applying the formula as;
d=∅*r
d= {0.8 *10⁻⁵} * 380,000 * 1000
d= 3040 m
Warm 12 grams of water from 98 degrees Celsius to 99 degrees Celsius
Answer:
E=mc△T
E=0.012(4200)(99-98)
E=50.4J
50.4 joules of heat is used
Does anyone get this? lol
Answer:
(a). 640.000 --- 6 significant figures.
(b). 2.0 --- 2 significant figures.
(c). 0.520200 --- 6 significant figures.
(d). 10.05 --- 4 significant figures.
(e). 10,000.0 --- 6 significant figures.
(f). 30.7 --- 3 significant figures.
(g). 0.00000065 --- 8 significant figures.
What is the electric potential at a distance of 1.2 m from a 7.5 UC point charge?
5.6 x 104 v
8.1 x 104 V
5.6 % 1010 V
8.1 x 1010 V
Answer:
5.6x10^4
Explanation:
use the equation V=kq/d
k is the constant 8.99x10^9
V=(8.99x10^9)q/d
q is the charge, 7.5 micro coulombs, but to get coulombs, multiply by 10^-6
V=(8.99x10^9)(7.5x10^-6)/d
And from the problem, we know that the distance is 1.2 meters
V=(8.99x10^9)(7.5x10^-6)/1.2
This simplifies to 5.6x10^4
The electric potential is 5.6 x 10⁴ v.
To find the electric potential the distance = 1.2 m
Charge q = 7.5 UC
What is electric potential and find the value?The amount of work needed to move a unit charge from the known point to some unknown point against the electric field is said to be electric potential.
Formula of an electric potential is
V = k ( q/r) volt
V - electric potential
k - Coulomb constant (8.99x10^9)
q - charge
r- distance of separation
V = (8.99x10⁹) (q/d)
q = 7.5 UC ( micro coulomb) 10⁻⁶ C
V=(8.99x10⁹)(7.5x10⁻⁶)/d
Substituting the values,
V=(8.99x10⁹)(7.5x10⁻⁶)/1.2
V = 5.6x10⁴ v
Thus, option A is correct.
Learn more about the electric potential,
https://brainly.com/question/15172925
#SPJ2
Pleaaaase help meeee
Read the following case and discuss how you would respond to the situation.
PROBLEM:
You have been assigned the position of Environmental Engineer for one of several local
robotics manufacturers whose water discharges flow into a lake in a flourishing tourist area.
Although all the robotics companies in the area are marginally profitable, they compete for
the same customers. Included in your responsibilities is the monitoring of water and air
discharges
at your plant and the periodic preparation of reports to be submitted to the Department of
Natural Resources. You have just prepared a report that indicates that the
level of pollution in the plant's water discharges slightly exceeds the legal limitations. Your
boss, the Plant Manager, says you should regard the excess as a mere
"technicality," and he asks you to "adjust" the data so that the plant appears to be in
compliance. He says that the slight excess is not going to endanger human or fish
life any more than if the plant were in compliance. On the other hand, he says, solving the
problem would require a very heavy investment in new equipment. He
explains, "We can't afford new equipment. It might even cost a few jobs. It will set us
behind our competitors. Besides the bad publicity we'd get, it might scare off
some of the tourist industry, making it worse for everybody."
1) How do you think you should respond to your boss's request? Explain :
2) Define the problem :
3) what are the possible results of decision?
4) is there any information about the situation that is not obvious or available in the paragraph?
5) what are the ethical issues to consider in this situation
6) How did you decide to handle the situation what did you decide to do?
Answer:
3
Explanation:
How are the molecules in a gas different from molecules in other states of matter?
Answer: The molecules in gases are different from other states of matter
Explanation:
The molecules in gases are different from other states of matter because unlike, for example, a solid, they move around freely and are much more spread apart. A gas can fill up any container, but once the container is unsealed, the gasses will immedietly be let out. Gases can be compressed much more easily than a solid or a liquid.
A sled is slowing down at the bottom of a snowy hill.
Which statement describes the sled's motion?
The sled has a constant velocity.
The sled is accelerating.
Is a sled slowing down at the bottom of a snowy hill accelerating or constant velocity
Answer:
A sled and its rider are moving at a speed of along a horizontal stretch of snow, as Figure 4.24a illustrates. The snow exerts a kinetic frictional force on the runners of the sled, so the sled slows down and eventually comes to a stop. The coefficient of kinetic friction is 0.050. What is the displacement x of the sled?
What is the chief benefit of anaerobic exercise?
A. Mental health
B. Improved physique
C. Endurance
D. Strength
Answer:
c isthe answer if not see my profile m e. e. t me I will explain u
2 equal charges are kept at x=a and x=-a. there can be only 1 point where the electric field will be 0? how, can anyone explain?
Answer:
At the midpoint of the line joining the two equal charges
Explanation:
The midpoint of the line joining the two equal charges has equal distance from each charge. Since the charges are at x = a and x = -a, at the midpoint of the line joining the two equal charges, the magnitude of the electric field experienced as a result of each charge is the same. But these two fields are in opposite direction, hence the net resulting electric field would be equal to zero.
Which statement describes a characteristic of a question that can be answered through scientific inquiry? (A.It requires the application of ethical standards.) (B.It can be answered using measurements.) (C.It can be answered using a philosophical argument.) (D.It requires the approval of more than one scientist.)
Answer:
B. It can be answered using measurements.
Explanation:
Scientific inquiry can be defined as the various ways, techniques and approach used by scientists to study the world and provide a detailed description (information) based on the empirical evidence derived from the investigation.
Measurements can be defined as a technique which typically involves the process of identifying and determining the dimensions, quality and quantity of a physical object.
Hence, the statement which best describes a characteristic of a question that can be answered through scientific inquiry is that, it can be answered using measurements. Using scientific inquiry to answer questions entails using measurements to propose specific and evidential explanations, as well as back up theories associated with the question.
An object experiences an acceleration of 7.7 m/s^2. As a result, it accelerates from rest to 20 m/s. How much distance did it travel during that acceleration?
Answer:
26m
Explanation:
Given parameters:
Acceleration = 7.7m/s²
Initial velocity = 0m/s
Final velocity = 20m/s
Unknown:
Distance traveled = ?
Solution:
To solve this problem, we use the expression below:
v² = u² + 2aS
v is the final velocity
u is the initial velocity
a is the acceleration
S is the distance
20² = 0² + (2 x 7.7 x S)
400 = 15.4S
S = 26m
Answer:
Answer:
Answer:
pay back : the answer is 2 because 2 + 4 = 2
Step-by-step explanation:
2 + 4 = 2 your welcome
Explanation:
Explanation: