1. What are the two effects of the continental plate/continental plate convergent boundary?

2. Where can you find an example of this type of divergent boundary? Which country, continent or ocean?

Answer:

The groupings of elements in the periodic table reveal various trends, present in groups such as the alkali metals and noble gases, or the lanthanides and actinides. The periodic table can be used to find information on elements or predict the properties of as-of-yet undiscovered elements.

Explanation:

Answer: D

Just took the quiz

Answer:

i. 3 moles.

ii. 132.03 grams.

iii. 105.6 grams.

Explanation:

Hello!

In this case, given the balanced chemical reaction, we can proceed as follows:

i. By starting with 5 moles of oxygen, via the 5:3 mole ratio we compute the produced moles of CO2:

[tex]n_{CO_2}=5molO_2*\frac{3molCO_2}{5molO_2} =3molCO_2[/tex]

ii. Now, since we have previously computed the moles of CO2 from the same moles of oxygen, by using its molar mass (44.02 g/mol), we obtain:

[tex]m_{CO_2}=3molCO_2*\frac{44.01gCO_2}{1molCO_2} =132.03gCO_2[/tex]

iii. Now, we need to combine the previously used two proportional factors for the calculation of the mass of CO2 from 128.00 grams of oxygen (molar mass 32.00 g/mol):

[tex]m_{CO_2}=128.00gO_2*\frac{1molO_2}{32.00gCO_2}*\frac{3molCO_2}{5molO_2}*\frac{44.01gCO_2}{1molCO_2}\\\\m_{CO_2}=105.6gCO_2[/tex]

Best regards!

Answer:

1)Pb(NO3)(aq) + MgSO4(aq)------> Mg(NO3)2(aq) + PbSO4(s)

2)Mn(NO3)2(aq) + 2KOH(aq) ----->Mn(OH)2(s) + 2KNO3(aq)

3)Zn(s) + 2H^2+(aq)----->Zn^2+(aq) + H2(g)

4) Cu(s) + 2Ag^+(aq) ---->Cu^2+(aq) + 2Ag(s)

Explanation:

A double replacement reaction is one in which ions exchange partners.

We can see that the ions in the reactants exchanged their partners in the products. Solid lead II sulphate was precipitated.

Reaction 2 is a single replacement reaction. Solid manganese hydroxide is formed.

Reactions 3 and 4 are redox processes as shown in the respective equations.

Answer:

B) separation by boiling points

Explanation:

According to the diagram depicted, crude oil is separated into its different units using boiling points.

Answer:

true

.......................

Answer: You're Welcome!

Oh, It's False - Kinetic energy depends upon the speed of the object; potential energy depends upon the position of the object.

Answer:

Salinity

HOPE THIS HELPS! :)

Explanation:

Answer:

2.04moles

Explanation:

Given parameters:

Number of molecules  = 1.23 x 10²⁴molecules

Unknown:

Number of moles of oxygen gas = ?

Solution:

To solve this problem;

                  6.02 x 10²³ molecules makes up 1 mole of any substance

                1.23 x 10²⁴molecules will make up [tex]\frac{1.23 x 10^{24} }{6.02 x 10^{23} }[/tex]   = 2.04moles

6.02 x 10²³ molecules makes up 1 mole of any substance

               1.23 x 10²⁴molecules will make up = 2.04moles

Answer

oh you again?

Explanation:

Answer:

We can find out what animals eat..and how long a food chain could get..?

Explanation:

Answer:

1. 10moles

2. Find the summarized equation below

Explanation:

Mole = mass ÷ molar mass

Molar mass of oleum (H2S2O7) = 1(2) + 32(2) + 16(7)

= 2 + 64 + 112

= 178g/mol

According to the information provided, the mass of oleum is 1780g, hence, the number of moles in it is:

Mole = 1780/178

Mole = 10moles

2. The summarized equation of the contact process is:

1) S + O2 → SO2

2) 2SO2 + O2 → 2SO3

3) SO3 + H2SO4 (conc. sulfuric acid) → H2S2O7

4) H2S2O7 + H2O → 2H2SO4 (dilute sulfuric acid)

Answer:

You could have looked it up, but here ya go...

Explanation:

Wind is a type of dry deposition method. If original soil is eroded and wind exists, soil particles move via wind (sometimes it is called dust transport) and finally are deposited at final destination regions/areas. However, water erosion occurs when rainfall or hail occurs.

Hope this Helped! :)

Explanation:

Speed = Frequency * Wavelength

= 8Hz * 5.78nm

= (8 * 5.78 * 10^-9)m/s

= (4.624 * 10^-8)m/s or 46.24nm/s.

Answer:

4.7K

Explanation:

Given parameters:

Initial volume  = 75L

Initial pressure  = 125psi  

        to atm gives 8.5atm

Initial temperature  = 288K

New volume  = 6.1L

New pressure  = 25psi

        to atm gives 1.7atm

Unknown:

New temperature = ?

Solution:

To solve this problem, we use the combined gas law which is given below:

        [tex]\frac{P1 V1}{T1}[/tex]    = [tex]\frac{P2 V2}{T2}[/tex]  

P, V and T are pressure, volume and temperature

1 and 2 are initial and new states

                  [tex]\frac{8.5 x 75}{288}[/tex]   = [tex]\frac{1.7 x 6.1}{T2}[/tex]

        T2  = 4.7K

Answer:

A

Explanation:

because they need a medium to travel they can travel everywhere if they got the medium

The ball's potential energy is transferring into kinetic energy

Brainly if correct? Thanks!

Answer:

A

Explanation:

The balls potential energy is changing to kinetic energy

Answer: mass

Explanation:

Answer:

0.266 grams of calcium sulfate

Explanation:

We can calculate the mass of calcium sulfate added using the given volume and concentration of the solution:

First we convert 600.0 mL to L ⇒ 600.0 mL equals 0.6000 L (600 ÷ 1000).

0.444 g/L * 0.6000 L = 0.266 g

Thus the answer is 0.266 grams of calcium sulfate.

Answer:

Introduction

As a diligent student of chemistry, you will likely encounter tons of reactions that occur in aqueous solution (perhaps you are already drowning in them!). When ions are involved in a reaction, the equation for the reaction can be written with various levels of detail. Depending on which part of the reaction you are interested in, you might write a molecular, complete ionic, or net ionic equation.

Definitions of molecular, complete ionic, and net ionic equations

A molecular equation is sometimes simply called a balanced equation. In a molecular equation, any ionic compounds or acids are represented as neutral compounds using their chemical formulas. The state of each substance is indicated in parentheses after the formula. [Huh?]

Let's consider the reaction that occurs between \text{AgNO}_3AgNO

3

​

start text, A, g, N, O, end text, start subscript, 3, end subscript and \text{NaCl}NaClstart text, N, a, C, l, end text. When aqueous solutions of \text{AgNO}_3AgNO

3

​

start text, A, g, N, O, end text, start subscript, 3, end subscript and \text{NaCl}NaClstart text, N, a, C, l, end text are mixed, solid \text{AgCl}AgClstart text, A, g, C, l, end text and aqueous \text{NaNO}_3NaNO

3

​

start text, N, a, N, O, end text, start subscript, 3, end subscript are formed. Using this information, we can write a balanced molecular equation for the reaction:

\text{AgNO}_3(aq) + \text{NaCl}(aq) \rightarrow \text{AgCl}(s) + \text{NaNO}_3(aq)AgNO

3

​

(aq)+NaCl(aq)→AgCl(s)+NaNO

3

​

(aq)start text, A, g, N, O, end text, start subscript, 3, end subscript, left parenthesis, a, q, right parenthesis, plus, start text, N, a, C, l, end text, left parenthesis, a, q, right parenthesis, right arrow, start text, A, g, C, l, end text, left parenthesis, s, right parenthesis, plus, start text, N, a, N, O, end text, start subscript, 3, end subscript, left parenthesis, a, q, right parenthesis

[What kind of reaction is this?]

If we could zoom in on the contents of the reaction beaker, though, we wouldn't find actual molecules of \text{AgNO}_3AgNO

3

​

start text, A, g, N, O, end text, start subscript, 3, end subscript, \text{NaCl}NaClstart text, N, a, C, l, end text, or \text{NaNO}_3NaNO

3

​

start text, N, a, N, O, end text, start subscript, 3, end subscript. Since \text{AgNO}_3AgNO

3

​

start text, A, g, N, O, end text, start subscript, 3, end subscript, \text{NaCl}NaClstart text, N, a, C, l, end text, and \text{NaNO}_3NaNO

3

​

start text, N, a, N, O, end text, start subscript, 3, end subscript are soluble ionic compounds, they dissociate into their constituent ions in water. For example, \text{NaCl}NaClstart text, N, a, C, l, end text dissociates into one ion of \text{Na}^+Na

+

start text, N, a, end text, start superscript, plus, end superscript for every ion of \text{Cl}^-Cl

−

start text, C, l, end text, start superscript, minus, end superscript; these ions are stabilized by ion-dipole interactions with the surrounding water molecules. [I don't get it!]

Image of crystalline sodium chloride next to image of chloride and sodium ions dissociated in water. Each chloride ion is interacting with multiple water molecules through the positive dipole of the water, and each sodium ion is interacting with water molecules through the negative dipole of the water.

Image of crystalline sodium chloride next to image of chloride and sodium ions dissociated in water. Each chloride ion is interacting with multiple water molecules through the positive dipole of the water, and each sodium ion is interacting with water molecules through the negative dipole of the water.

Sodium chloride dissociates into sodium and chloride ions in water, and these ions become solvated by the highly polar water molecules. Image credit: "Salts: Figure 1" by OpenStax Anatomy and Physiology, CC-BY-NC-SA 4.0.

From the molecular formula, we can rewrite the soluble ionic compounds as dissociated ions to get the complete ionic equation:

\text{Ag}^+(aq) + \blueD{{\text{NO}_3}^-(aq)} + \maroonD{\text{Na}^+(aq)} + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s) + \maroonD{\text{Na}^+(aq)} + \blueD{{\text{NO}_3}^- (aq)}Ag

+

(aq)+NO

3

​

−

(aq)+Na

+

(aq)+Cl

−

(aq)→AgCl(s)+Na

+

(aq)+NO

3

​

−

​

−

(aq)

​

+

Na

+

(aq)

​

+Cl

−

(aq)→AgCl(s)+

Na

+

(aq)

​

+

NO

3

​

−

(aq)

​

Answer:

25.2°C

Explanation:

Given parameters:

Energy applied to the water  = 1000J

Mass of water  = 50g

Final temperature  = 30°C

Unknown:

Initial temperature  = ?

Solution:

To solve this problem, we use the expression below:

            H  = m c Ф

H is the energy absorbed

m is the mass

c is the specific heat capacity

Ф is the change in temperature

     1000  = 50 x 4.184 x (30  -  initial temperature )

     1000  = 209.2(30 - initial temperature)

      4.78  = 30 - initial temperature

      4.78  - 30  = - initial temperature

         Initial temperature  = 25.2°C

Answer:

3) Compound 1 is ionic, and compound 2 is molecular

Explanation:

Compound-1 is an ionic compound while Compound-2 is a molecular compound. Option 3 is correct.

Ionic Compound:

They are formed when an atom donates its electron to another atom. This results in one positive and one negative ion.

Hence, it is a very strong bond. These compounds have a very high melting and boiling point. They are very good electric conductors in the aqueous solution.

For example- NaCl.

Molecular compounds:

They are compounds that are made up of discrete molecular units. For example- [tex]\bold {H_2O}[/tex]

They have very weak intermolecular bonds hence have low boiling and melting point and do not conduct electricity.

SInce Compound-1 has higher MP and BP and Compound-2 has low melting and boiling point.

Therefore, Compound-1 is an ionic compound while Compound-2 is a molecular compound.

To know more about Ionic Compound:

https://brainly.com/question/9167977

The original concentration : 800%

Given

Diluted 1/40

Final concentration 20%

Required

The original concentration

Solution

Dilution is the process of adding solvent to get a more dilute solution.

The moles(n) before and after dilution are the same.

Can be formulated :

 n₁ = n₂

M₁.V₁ = M₂.V₂

diluted 1/40(dilution factor)⇒ V₁/V₂=1/40⇒V₂/V₁=40

M₂ = 0.2(20%)

Input the value for M₁ :

M₁=M₂ x (V₂/V₁)

M₁ = 0.2 x 40

M₂ = 8(800%)

=

Answer:

Mass of water produced = 19.8 g

Explanation:

Given data:

Mass of hydrogen peroxide = 37.7 g

Mass of water produced = ?

Solution:

Chemical equation:

2H₂O₂      →        2H₂O  + O₂

Number of moles of H₂O₂:

Number of moles = mass/molar mass

Number of moles = 37.7 g/ 34 g/mol

Number of moles = 1.1 mol

Now we will compare the moles of H₂O₂ and H₂O from balance chemical equation in order to determine the moles of water formed.

                                   H₂O₂      ;           H₂O

                                      2         :             2

                                     1.1         :          1.1

Mass of water formed:

Mass = number of moles × molar mass

Mass = 1.1 mol × 18 g/mol

Mass = 19.8 g

Answer:

8.87 L.

Explanation:

From the question given above, the following data were obtained:

Mass (m) of gas = 12 g

Initial volume (V₁) = 14.5 L

Initial pressure (P₁) = 52 cmHg

Final pressure (P₂) = 85 cmHg

Final volume (V₂) =?

The final volume of the gas can be obtained by using the Boyle's Las equation as illustrated below:

P₁V₁ = P₂V₂

52 × 14.5 = 85 × V₂

754 = 85 × V₂

Divide both side by 85

V₂ = 754 / 85

V₂ = 8.87 L

Thus the volume of the gas will be 8.87 L

Answer:

hydrogen, carbon, oxygen and nitrogen

Explanation:

Most organic compounds are made up of the four elements: hydrogen, carbon, oxygen and nitrogen.

Most organic compounds are made of just four elements are  hydrogen, carbon, oxygen and nitrogen.

The term organic compound is defined as a substance that contains covalently - bonded carbon and hydrogen and often with other elements.

Benzoic acid, aromatic compounds, benzoic aldehyde, propanoic acid, butanoic acid, malonic acid, amines, heterocyclic compounds, VOC, benzoic acid, and diethyl malonate are some examples of organic compounds.

Carbohydrates, lipids, proteins, and nucleotides are all organic compounds that are required for human function. Because they contain both carbon and hydrogen, these compounds are classified as organic.

Thus, Most organic compounds are made of just four elements are  hydrogen, carbon, oxygen and nitrogen.

To learn more about the organic compound, follow the link;

https://brainly.com/question/5994723

#SPJ2