Calculate the molarity of a NaOH solution that is prepared by diluting 100mL of 0.20M NaOH with 150mL of H2O.
Molarity of solution = 0.08 M
Further explanationMolarity shows the number of moles of solute in every 1 liter of solution or mmol in each ml of solution
[tex]\tt M=\dfrac{n}{V}[/tex]
Where
M = Molarity
n = number of moles of solute
V = Volume of solution
mol of NaOH[tex]\tt mol=0.2~M\times 100~ml=20~mlmol=0.02~mol[/tex]
molarityVolume of solution = 100 ml + 150 ml = 250 ml
[tex]\tt M=\dfrac{0.02~mol}{0.250~L}=0.08[/tex]
What kinds of paintings did Winslow Homer make
Which of the following is an example of quantitative data?
A.five eggs in each nest
B.oval-shaped eggs
C.small eggs
D.blue eggs with white specks
By what process do small molecules move into cells?
Answer:
small molecules move into the cell, Then it is by diffusion or facilliated diffusion.
he descriptions below explain two ways that water is used by plants on a sunny day.
I. In a process called transpiration, some liquid water in leaves changes to water vapor. The water vapor is released into the air through tiny pores in the leaves. This allows more liquid water from the soil to be pulled up the roots and stem to replace water lost from the leaves.
II. Plants use some of this water in leaves in a process called photosynthesis. During photosynthesis, water and carbon dioxide break apart and recombine to form two new substances, oxygen and glucose.
Based on the above description of transpiration and photosynthesis, which type of change happens to water during each process?
In transpiration, because some of its properties change, water undergoes a physical change but keeps its identity. In photosynthesis, because its identity changes, water undergoes a chemical change.
In transpiration, because some of its properties change, water undergoes a chemical change but keeps its identity. In photosynthesis, because its identity changes, water undergoes a physical change.
In transpiration, because its physical properties change, water undergoes a physical change and loses its identity. In photosynthesis, because it keeps its identity, water undergoes a chemical change.
In transpiration, because its chemical properties change, water undergoes a chemical change and loses its identity. In photosynthesis, because it keeps its identity, water undergoes a physical change.
Mark this and return
Answer:number 2
Explanation: because thats how it works
Explanation:
Joy mixed baking soda and vinegar for her volcano model. She saw lots of bubbling and fizzing. What can she infer happened
A chemical change
A change in state liquid to solid
Matter was created
A physical change
Answer:
a chemical change
Explanation:
bubbles formed
Answer:
Explanation:
✔︎A chemical change
✖︎wich is D
would be ur answer
Explanation:
❐A chemical change happens when one chemical substance is transformed into one or more different substances, such as when iron becomes rust. Chemical changes occur through the process of chemical reactions, and the resulting substances have different properties because their atoms and molecules are arranged differently.
CAN I PLZ GET MARK AS THE BRAINLIEST? ")
Which group on the periodic table ways to lose electrons?
Answer:
Elements that are metals tend to lose electrons and become positively charged ions called cations. Elements that are nonmetals tend to gain electrons and become negatively charged ions called anions. Metals that are located in column 1A of the periodic table form ions by losing one electron.
Explanation:
hope it helps!
Using triangulation which point is the earthquakes epicenter?
Answer:
free points aye
Explanation:
Answer: 3
Three is where the earthquakes epicenter is.
Plz mark brainliest:)
Describe the main differences beA human cell has 46 chromosomes. At the end of mitosis, there are two cells, each with 46 chromosomes, for a total of 92 chromosomes split between both cells.
Which statement describes meiosis in a human cell?
At the end of meiosis, there are two cells, each with 46 chromosomes, for a total of 92 chromosomes split between both cells.
At the end of meiosis, there are four cells, each with 23 chromosomes, for a total of 92 chromosomes split between the four cells.
At the end of meiosis, there are four cells, each with 46 chromosomes, for a total of 184 chromosomes split between the four cells.
At the end of meiosis, there are two cells, each with 23 chromosomes, for a total of 184 chromosomes split between both cells. tween meiosis and mitosis.
Answer:
At the end of meiosis, there are four cells, each with 23 chromosomes, for a total of 92 chromosomes split between the four cells.
Explanation:
During meiosis, a diploid cell (46 chromosomes) replicates its DNA (making 92 chromosomes) then undergoes two cell divisions to generate four haploid cells (23 chromosomes).
These haploid cells are the gametes which, during fertilization, fuse to become a zygote with 46 chromosomes.
Answer:
the person above me is correct.
Explanation:
Which description applies to a physical property? Choose the correct answer
O depends directly on the amount of the substance present
O examines changes in the composition and structure of matter
O measured or observed without changing the identity and composition of matter
O determined by changing the identity of a substance and observing how it reacts
Answer:
the third one, measured or observed without changing the identity and composition of matter. because physical property does not under go any change but can be put back.
Aquanauts explore the area called?
Answer:
Inner space
Explanation:
I hope this helps
apples cost $1.75 per pound
What conversion factor could be used to determine how many pounds of apples could be bought for $10.00 ?
Answer: my opinion is about 5 pounds of apples that you can get with $10
Explanation:
srry if im wrong
A lump of chromium (Cr) has a specific heat of 0.448J/g℃. It is heated to a temperature of 89.5℃ and placed into a calorimeter with 75.2 mL of water at 20.5℃. After stirring, the final temperature of the water, Cr metal, and calorimeter is 27.4℃. What is the mass of Cr metal?
Answer:
Mass of Cr= 78 g
Explanation:
Given data:
Specific heat of Cr = 0.448 j/g.°C
Initial temperature of Cr lump = 89.5°C
Mass of water = 75.2 mL or 75.2 g
Initial temperature of water = 20.5°C
Final temperature of water = 27.4°C
Mass of Cr = ?
Solution:
when we placed the lump of Cr metal into water heat lost by limp is equal to the heat gain by water.
Specific heat capacity of water is 4.184 j/g.°C
Q = mcΔT
Q = 75.2 g× 4.184 j/g.°C × (27.4°C - 20.5°C)
Q = 2171 J
Heat lost by Cr lump is -2171 J. Now we will calculate the mass of Cr.
Q = mcΔT
-2171 J = m ×0.448 j/g.°C × ( 27.4°C- 89.5°C)
-2171 J = m × -27.821 j/g
m = -2171 J/-27.821 j/g
m = 78 g
How are mineral characteristics different from mineral properties?
Answer:
The physical properties of minerals are related to their chemical composition and bonding. Some characteristics, such as a mineral's hardness, are more useful for mineral identification.
Explanation:
Answer:
Explanation:
mineral properties are what it is made if the characteristics are what it looks like. Like is it shiny, hard, smooth. those are characteristics.
The compound, BeCl2, would be formed by
a. The sharing of all electrons
b. The transfer of all electrons
c.
The transfer of valence electrons
d. The sharing of valence electrons
Answer:
The sharing of valence electrons
Explanation:
A covalent bond is formed when two or more atoms share valence electrons.
In BeCl2, electrons are shared between the beryllium atom and two chlorine atoms.
Owing to the large difference in electronegativity between the two elements, the bond is polar covalent.
8.
188 W
188
75
Re
+
74
The statement means that in every interaction, there is a pair of forces acting on the two interacting objects. The size of the forces on the first object equals the size of the force on the second object. The direction of the force on the first object is opposite to the direction of the force on the second object. Forces always come in pairs - equal and opposite action-reaction force pairs.
Which landform is created by glaciers? A. sandbar B. moraine C. alluvial fan (will give brainliest to the best answer)
Answer: B: Moraine
Explanation:
Write the word equations for the following balanced chemical equations.
a. Zn + 2HCl → ZnCl2 + H2
b. 2503 2502 + O2
Answer:
21
Explanation:9+10
A student observes that instant tea dissolves more rapidly in a cup of 250 mL of stirred hot water than in a cup of 250 mL of stirred cold water. Which is the most relevant hypothesis that the student could develop based on this observation?
A.
Volume affects the rate that instant tea dissolves in a solvent.
B.
Temperature affects the rate that instant tea dissolves in water.
C.
Stirring affects the rate that instant tea dissolves in water.
D.
Pressure affects the rate that instant tea dissolves in water.
Please answer my question!
Answer:
B
Explanation:
In this question, there is no mention of pressure, so we can eliminate answer D. In both cups, it mentions they contain 250 mL of water and both are stirred, so these would be constants. The only difference between the cups is temperature, so temperature must affect the rate that instant tea dissolves in water. Therefore the answer is B.
An object has 15 grams of atoms and displaces 2.5 mL of water when dropped into a cylinder. What is the objects density... HELP IM IN CLASS RN AND I NEED ANSWERS ASAP, grades are due in couple hours
Answer:
6g/mL
Explanation:
The density, which is the mass per unit volume of an object, can be calculated using the formula;
D= m/v
Where; D = density (g/mL)
M = mass of substance (g)
V = volume (mL)
In this question, the object's mass = 15g, volume of water= 2.5 mL, d =?
Therefore,
Density = 15/2.5
Density = 6 g/mL
The object's density is 6g/mL
7. Which liquid caused the egg to shrink? *
(1 Point)
a. Vinegar
b.Water
c.Corn Syrup
Answer:
c.corn syrup
the egg shrinks due to osmosi.
Reggie suddenly decided to drive to the Grand Canyon, because he had never seen it. He didn't even have a map showing him how to get there! Reggie made a(n) _____. a. routine decision b. impulse decision c. daily decision d. regular decision Please select the best answer from the choices provided A B C D
Answer:
b. impulse decision
Explanation:
In this scenario, Reggie suddenly decided to drive to the Grand Canyon, because he had never seen it. He didn't even have a map showing him how to get there! Reggie made an impulse decision.
An impulse decision can be defined as a type of decision an individual makes without having a clear thought about the decision. Thus, an impulsive decision is strictly based on an individual's inclination, instinct, whim or sudden desire to do something.
This ultimately implies that, decisions that are made spontaneously without due diligence and considerations refer to an impulse decision.
Hence, Reginald's decision is an impulse decision because he suddenly decided to drive to go see a place (Grand Canyon) he hasn't seen before, even though he had no map to use as a guide or direction.
Answer: b
Explanation:
Silver is a white metal that is an excellent conductor. Silver tarnishes when exposed to air and light. The density of silver is 10.49 g/cm3. The melting point is 962oC and the boiling point is 2000oC. A chemical property of silver is A) density. B) melting point. C) tarnishes in air. D) that it is a conductor.
Answer:
c tarnishes in air
Explanation:
After silver has been exposed to air that contains sulphur gases, discoloration would occur. there would be darkening that is caused by the reaction with gases.When any silver object tarnishes, it brings about a disfiguring of that object. Hydrogen sulphide would be needed for this to happen. silver sulphide is black and a if a thin layer should form on any surface, it ill darken it. This is what we refer to as tarnishing.
Answer:
c
Explanation:
it tarnishes in air
Each of the four liquids had the same volume, why don’t
they each have the same density?
Key concepts
Physics
Chemistry
Density
Liquids
Introduction
You probably know that when solid objects are placed in liquid, they can sink or float. But did you know that liquids can also sink or float? In fact, it is possible to stack different layers of liquids on top of one another. The key is that all the different layers must have different densities. You can stack them by picking several liquids with a range of densities or by varying the density of one liquid by adding chemicals such as sugar or salt to it. If you choose colored liquids or add food coloring to each layer, you can even create a whole rainbow of colors in one single glass! Want to see for yourself? In this science activity you will stack several liquids—one by one—and create a colorful density column!
Background
Whether an object sinks or floats depends on its density compared with the density of the liquid into which it is dropped. All types of matter—solids as well as liquids—are made up of many different atoms. Depending on the mass of these atoms, their size and the way they are arranged, different substances will have different densities. The density is characteristic for each individual compound and defined as the mass of a compound divided by its volume. In other words, the more matter there is in a certain amount of volume, the denser a substance is. One cubic centimeter of rock, for example, is much heavier than a cubic centimeter of wood. This is because there is much more matter in the same volume of rock compared with the wood.
ADVERTISEMENT
Liquids can also have different densities. Freshwater, for example, has a density of about one gram per cubic centimeter at room temperature. Any compound—liquid or solid—that has a higher density than water will sink whereas substances with a lower density than that will float. You can test that for yourself by gathering several liquids that you have in your kitchen such as vegetable oil, corn syrup, dishwashing soap, water, rubbing alcohol and more. Which one of these do you think will sink or float in water? Find out in this activity!
Materials
Glass or cup
Water
Food coloring
Scissors
Rubber band (wide)
Small piece of wax
Popsicle stick
At least two small, clear jars or transparent mini cups (two ounces) with lids
Permanent marker
Masking tape
Three tablespoons
Dark corn syrup
Vegetable oil
Penny
Paper towels
Rubbing alcohol, dishwashing soap and other liquids (optional)
Sugar (optional)
Preparation
Gather all your materials at a workspace that can tolerate spills of all the liquids.
Fill a cup with tap water and add a couple of drops of food coloring to the water.
Ask an adult to help you cut and prepare small pieces (about 0.5 by 0.5 centimeter) of the rubber band, the popsicle stick and the wax.
Place the two empty jars in front of you (without the lids) and label them “1” and “2” with a piece of tape and the permanent marker.
Procedure
Take a clean tablespoon and pour two tablespoons of corn syrup in jar 1.
With the second tablespoon, carefully pour two tablespoons of colored water into jar 1 on top of the corn syrup. What happens to the water on top of the corn syrup? Does it mix or stay separate?
Use the third clean tablespoon to pour two tablespoons of vegetable oil in jar “1” on top of the colored water. Do you see mixing of the liquids? What happens to the oil? Does it float on top or sink to the bottom?
Now take empty jar 2 and add the same liquids—but in reverse order. Start by pouring in two tablespoons of vegetable oil.
In this chemical formula: 3NH4 (ammonium) This chemical formula means there are 3 _____________ ___________, and 4 __________ ________ in each molecule.
Answer:
hope it helped you
Explanation:
3 atoms of nitrogen and 4 atoms of hydrogen in each molecule
The chemical formula 3NH4 means there are 3 atoms of nitrogen and 4 atoms of hydrogen in each molecule.
What are chemical reaction?Chemical reaction is defined as a process in which one or more substances, the reactants, are converted into one or more different substances, the products.
A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.
There are five main types of reactions.
Combination reaction - A combination reaction is a reaction in which two or more substance combine to form a single new substance also known as synthesis reaction.Decomposition reaction - A decomposition reaction is a reaction in which a compounds break down into two or more simpler substance.Single replacement reaction - A single replacement reaction is a reaction in which one element replaces a similar element in a compound.Double replacement reaction - A double replacement reaction is a reaction in which the positive or negative ions of to ionic compounds exchange places from two new compound.Combustion reaction - A combustion reaction is a reaction in which a substance reacts with oxygen gas, releasing energy in the form of heat and light.Thus, the chemical formula 3NH4 means there are 3 atoms of nitrogen and 4 atoms of hydrogen in each molecule.
To learn more about chemical reaction, refer to the link below:
https://brainly.com/question/3461108
#SPJ2
The density of a pure liquid at 25 degrees Celsius was calculated by determining the mass and volume of a sample of the liquid. A student measured the mass of a clean, dry 25.00 mL volumetric flask, filled the flask to its calibration mark with the liquid, and then measured the mass of the flask and liquid. The recorded measurements are shown in the table above. On the basis of this information, to how many significant figures should the density of the liquid be reported?
Answer
The density of the liquid is 0.82 g/mL.
Explanation:
From the question given above, the following data were obtained:
Mass of empty flask = 18.990 g
Mass of flask + liquid = 39.439 g
Volume of liquid = 25 mL
Density of liquid =..?
Next, we shall determine the mass of the liquid. This can be obtained as follow:
Mass of empty flask = 18.990 g
Mass of flask + liquid = 39.439 g
Mass of liquid =.?
Mass of liquid = (Mass of flask + liquid) – (Mass of empty flask)
Mass of liquid = 39.439 – 18.990
Mass of liquid = 20.503 g
Finally, we shall determine the density of the liquid as follow:
Mass of liquid = 20.503 g
Volume of liquid = 25 mL
Density of liquid =..?
Density = mass / volume
Density of liquid = 20.503 / 25
Density of liquid = 0.82 g/mL
The diagram shows a model of an animal cell. Explain how you'd modify the model to show the structures in a plant cell.
Answer:to show the structures of a plant cell,add a cell wall around the membrane and increase the size of the vaculoe insidethe cell, draw green ovals to represent chloroplasts.
Explanation:
How does the work needed to lift an object and the gravitational potential energy of the object compare? OThey are equal. OThe work is greater. OThe work is less. OThe comparison dependş on the height.
○ they are equal
○ the work is greater
○ the work is less
○ the comparison depends on the height
Answer:
They are equal
Explanation:
took the test
Answer:
ITS A JUST FINISHED
Explanation:
Name the laws for 1,2, and 3
Answer:
1. Boyle's law
2. Charle's law
3. Ideal Gas law
Explanation:
Which of these statements describes a chemical property?
Answer:
it rusts when exposed to air
Answer:
A
Explanation: