Answer:
The new period of oscillation is D) 3.0 T
Explanation:
Simple Pendulum
A simple pendulum is a mechanical arrangement that describes periodic motion. The simple pendulum is made of a small bob of mass 'm' suspended by a thin inextensible string.
The period of a simple pendulum is given by
[tex]T=2\pi \sqrt{\frac{L}{g}}[/tex]
Where L is its length and g is the local acceleration of gravity.
If the length of the pendulum was increased to 9 times (L'=9L), the new period of oscillation will be:
[tex]T'=2\pi \sqrt{\frac{L'}{g}}[/tex]
[tex]T'=2\pi \sqrt{\frac{9L}{g}}[/tex]
Taking out the square root of 9 (3):
[tex]T'=3*2\pi \sqrt{\frac{L}{g}}[/tex]
Substituting the original T:
[tex]T'=3*T[/tex]
The new period of oscillation is D) 3.0 T
what kind of plate boundary is ocean ocean?
A vector
of magnitude 5 units and another vector ū of magnitude 3 units point in directions
differing by 60°. Find out (a) the scalar product of the two vectors and (b) the vector product of the two vectors
Answer:
7.5 units
13 units
Explanation:
[tex]|v|=5\ \text{units}[/tex]
[tex]|u|=3\ \text{units}[/tex]
[tex]\theta[/tex] = Angle between the vectors = [tex]60^{\circ}[/tex]
Scalar product is given by
[tex]u\cdot v=|u||v|\cos\theta\\ =3\cdot 5\cdot \cos60^{\circ}\\ =7.5\ \text{units}[/tex]
The scalar product of the vectors is 7.5 units.
Vector product is given by
[tex]u\times v=|u||v|\sin\theta\\ =3\times 5\sin60^{\circ}\\ =13\ \text{units}[/tex]
The vector product of the vectors is 13 units.
a 30-kg child sitting in a chair applies a force of approximately 300 N downward. on the chair approximately how much force does the chair apply upward to the child
A. 10N
B. 30N
C. 300N
D .600N
Answer:
moment's equilibrium required
moment = force x perpendicular distance from force's line of action (from pivot)
counter clockwise = clockwise moments
=> 15g(1.5) = F(0.3)
=> F = 15*9.81*5 = 735.75 ~= 736 N
Explanation:
Un automobil pleacă din Alexandria la ora 23 și 25 de minute și ajunge la București la ora 0 și 20 de minute. Aflați durata mișcării. Dacă automobilul s-a deplasat cu viteza de 90 km/h, aflați distanța dintre localități.
Answer:
[tex]55\ \text{minut}[/tex]
[tex]82.5\ \text{km}[/tex]
Explanation:
Timpul când mașina părăsește Alexandria este [tex]23:25[/tex]
Ora sosirii mașinii la București este [tex]00:20[/tex]
Deci, timpul necesar pentru călătorie este [tex]60-25+20=55\ \text{minut}=\dfrac{55}{60}\ \text{ore}[/tex]
Viteza mașinii este de 90 km/h
Distanța este dată de produsul vitezei și al timpului
[tex]90\times \dfrac{55}{60}=82.5\ \text{km}[/tex]
Distanța dintre localități este [tex]82.5\ \text{km}[/tex].
If you drop a steel metal ball off a building and it takes 3 seconds to hit
the ground, how tall is the building?
Answer:
[tex]40\:\mathrm{m}[/tex]
Explanation:
We can use kinematics equation [tex]\Delta y={v_i}^2+\frac{1}{2}at^2[/tex] to solve this problem. Because the metal ball's initial velocity was 0, [tex]{v_i}^2=0[/tex].
Therefore, our equation becomes:
[tex]\Delta y=\frac{1}{2}at^2[/tex] (freefall equation).
[tex]t[/tex] is given as 3 seconds and [tex]a[/tex] is acceleration due to gravity ([tex]9.81\:\mathrm{m/s}[/tex]).
Therefore, our answer is:
[tex]\Delta y = \frac{1}{2}\cdot9.81\cdot3^2=44.145=\fbox{$40\:\mathrm{m}$}[/tex] (one significant figure).
When fireworks explode, sound and light are produced. These are examples of(1 point)
macroscopic inputs.
macroscopic outputs.
microscopic inputs.
microscopic outputs.
Answer: macroscopic outputs
Explanation:
When fireworks explode, sound and light are produced. These are examples of macroscopic outputs. Because, explosion from fireworks is an exothermic process which releases massive heat energy to the surroundings.
What is exothermic reaction?Exothermic reaction are those which evolve heat energy to the surroundings. The change in enthalpy of the reaction is negative here. Whereas, in an endothermic reaction energy is absorbed by the reactants.
Exothermic reactions sometimes results in massive explosion. The heat energy released to the surroundings from the fire works is macroscopic level.
The small scale process or quantity that cannot be measured using normal scales are called microscopic units. Therefore, the sound, light, and heat from the explosion all are macroscopic outputs.
Find more on exothermic reactions:
https://brainly.com/question/29206227
#SPJ6
Which two life functions of animals help maintain the water cycle by recycling water back into the environment?
Answer:
Respiration and excretion
Explanation:
Respiration. When animals breathe, their lungs release water vapour to the atmosphere.
Animals excrete water by respiration and by passing urine.
If a car traveled 100 km in 2 hr, what was its average speed in km/hr?
average speed =
d =
t =
Answer:
Average speed will be 50km/hr
Explanation:
Distance/Time
100/2
50kmph
plz mark as brainliest
Answer:
50km/hr
Explanation:
avgspeed=Δdistance/Δtime
Δd=100km
Δt=2hr
=100km/2hr
=50km/hr
A body moving in simple harmonic motion has an amplitude of 10cm and a frequency of 100Hz. Find i.mthe period of oscillation, ii. the acceleration at the maximum displacement, iii. the velocity at the centre of motion
Explanation:
= 5 cm = 0.05 m
T = 0.2 s
ω=2π/T=2π/0.2=10πrad/s
When displacement is y, then acceleration, a=−ω2y
Velocity, V=ωr2−y2
Case (a) When y=5cm=0.05m
a=−(10π)2×0.05=−5π2m/s2
V=10π×(0.05)2−(0.05)2=0
Case (b) When y=3cm=0.03m
a=−(10π)2×0.03=−3π2m/s2
V=10π×(0.05)2−(0.03)2=10π×0.04=0.4π m/s
Case (c) When y=0
a=−(10π)2×0=0
V=10π×(0.05)2−02=
hope it helps. pls follow and mark as brainliest
A physics student is driving his pick-up
truck down Lake Avenue. The pick-up is
equipped with a projectile launcher that
imparts a vertical velocity to a water-filled
rubber projectile. While traveling 20.0 m/s
in an eastward direction, the projectile is
launched vertically with a velocity of 58.8
m/s.
Fill in the table at the right. showing the
horizontal and vertical displacement of the
projectile every second for the first 12
seconds.
TOTAL FLIGHT TIME
Rising Projectile
vi = initial velocity = 58.8 m/s
vf = final velocity = 0
g = gravity acceleration = -9.81 m/s²
t = elapsed time = to be determined
vf = vi + gt
vf - vi = gt
(vf - vi)/g = t
t = (vf - vi)/g
t = (0 - 58.8)/-9.81
t = -58.0/-9.81
t = 5.99 s ≈ 6.00 s
Falling Projectile
vi = initial velocity = 0
vf = final velocity = 58.8 m/s
g = gravity acceleration = 9.81 m/s²
t = elapsed time = to be determined
vf = vi + gt
vf - vi = gt
(vf - vi)/g = t
t = (vf - vi)/g
t = (58.8 - 0)/9.81
t = 58.0/9.81
t = 5.99 s ≈ 6.00 s
t(total) = t(up) + t(down) = 6.00 s + 6.00 s = 12.0 s Total Flight Time
HORIZONTAL DISTANCE TRAVELED
v = velocity, horizontal = 20.0 m/s
d = to be determined
t = elapsed time = 12.0 s
v = d/t
vt = d
d = vt
d = (20.0 m/s)(12.0 s)
d = 240 m Horizontal Distance Traveled
00
1. What causes electrical shock?
Current
Amperage
Voltage
Watts
Answer: A) Current
Current is the flow of electrons. The more electrons that flow, then the higher the amperage which measures this flow. If the current is high enough, then the electrical shock may cause damage of some kind.
"Amperage" is abbreviated as "Amp". You may see something like "milliamp" when it comes to measuring this amperage.
A 1500kg car is at rest before it accelerates when the light turns green. If it covers 45.0 meters in 15.0 seconds, what is the net force applied to the car?
Answer:
300N
Explanation:
Given parameters:
Mass of car = 1500kg
Initial velocity = 0m/s
Distance covered = 45m
Time = 15s
Unknown:
Net force applied = ?
Solution:
From Newton's second law:
Force = mass x acceleration
Force = mass x [tex]\frac{v - u}{t}[/tex]
v is the final velocity
u is the initial velocity
t is the time taken
Final velocity = [tex]\frac{45}{15}[/tex] =3m/s
Force = 1500 x [tex]\frac{3 - 0}{15}[/tex] = 300N
TIMED URGENT! REALLY APPRECIATE HELP!! TYSM!!!!!
What is the average Speed of the roller coaster? *
20 meters per second
20 meters per minute
20 m/hr
Answer:
1st
Explanation:
20 meters per second
Explanation:
look at the chart
When blue light (450 nm) is shone on a particular metal surface, electrons are ejected with a kinetic energy of 2.5 x 10-20 J. Calculate the work function for this metal.
Answer:
the work function of the metal is 4.167 x 10⁻¹⁹ J .
Explanation:
Given;
wavelength of the incident light, λ = 450 nm = 450 x 10⁻⁹ m
kinetic energy, K.E = 2.5 x 10⁻²⁰ J
The energy of the incident light is calculated as;
[tex]E = hf = \frac{h c}{\lambda} \\\\where;\\\\c \ is \ speed \ of \ light = 3 \times 10^8 \ m/s\\\\ h \ is \ Planck's constant = 6.626 \times 10^{-34} Js \\\\E = \frac{(6.626 \times 10^{-34})(3\times 10^8)}{450 \times 10^{-9}} \\\\E = 4.417 \times 10^{-19} \ J[/tex]
Apply Einstein photoelectric equation to determine the work function of the metal;
E = W + K.E
where;
W is the work function of the metal
W = E - K.E
W = 4.417 x 10⁻¹⁹ J - 2.5 x 10⁻²⁰ J
W = 44.17 x 10⁻²⁰ J - 2.5 x 10⁻²⁰ J
W = 41.67 x 10⁻²⁰ J
W = 4.167 x 10⁻¹⁹ J
Therefore, the work function of the metal is 4.167 x 10⁻¹⁹ J .
The work function of the photon is 4.167*10^19J
The energy of this photon can be calculated as
E = hc/λ
Data given;
λ = 450nm = 450*10^-9mh = 6.626*10^-34JSK.E = 2.5*10^-20Jc = 3.0*10^8m/sEnergy of the Photonsubstituting the values into the equation;
[tex]E = hc / y\\E = \frac{6.626*10^-^3^4*3.0*10^8}{450*10^-^9} \\E = 4.42*10^-^1^9J[/tex]
Work FunctionThe work function of the photon can be calculated as;
E = K.E + Ф
4.42*10^-19 = 2.5*10^-20 + Ф
Ф = [tex]4.42*10^-^1^9 - 2.5*10^-^2^0=4.167*10^-^1^9J[/tex]
The work function of the photon is 4.167*10^-19 J
Learn more on work function of a photon here;
https://brainly.com/question/11683155
If Jerome is swinging on a rope and transferring energy from gravitational potential energy to kinetic energy, what is being done? compression work radiation energy creation
Answer: work
Explanation:
When Jerome swings on a rope and hence this leads to the transfer of energy from the gravitational potential energy to a kinetic energy, this implies that work is being done.
For work to be done, it simply means that one has to transfer energy from one particular form to another form. In this case, the energy was transferred from the gravitational potential energy to a kinetic energy.
Answer:
work
Explanation:
A 0.50-kilogram frog is at rest on the bank surrounding a pond of water. As the frog leaps from the bank, the magnitude of the acceleration of the frog is 4.0 meters per second².
Complete question:
A 0.50 kilogram frog is at rest on the bank surrounding a pond of water. As the frog leaps from the bank, the magnitude of the acceleration of the frog is 4.0 meters per second^2. Calculate The magnitude of the net force exerted on the frog as it leaps.
Answer:
2.0N
Explanation:
Given that,
Mass, m of the frog = 0.5 kg
The acceleration of the frog = 4.0 m/s².
We have been asked To find,
The magnitude of the net force exerted on the frog as it leaps.
So
We calculate this using the formula below :
F = ma
When we insert the values into the formula, we have:
F = 0.5 kg × 4 m/s²
F = 2.0 N
Therefore, the magnitude of net force is 2.0 N.
PLEASE HELP ASAP A ball is rolling on a flat, frictionless surface. What will happen to the ball if no unbalanced force acts on the ball?
A.
The ball will roll faster and faster.
B.
The ball will begin to roll in the opposite direction.
C.
The ball will begin to roll faster for a time and then begin to roll slower.
D.
The ball will continue to roll in the same direction and at the same speed.
Rolling friction causes a ball to roll more slowly when it rolls on a horizontal surface. Since static friction is to blame for the friction force, it produces no net work and has no effect on energy dissipation. Thus, option A is correct.
What happens to the ball if no unbalanced force on the ball?On a frictionless horizontal surface, the ball could neither speed up no slow down because the horizontal surface was intermediate between downhill and uphill. Galileo concluded that in the absences of friction, a ball that once started rolling on a horizontal surface would roll forever.
Friction causes a ball rolling on a flat surface to slow down. The ball finally comes to a stop as a result of friction, which operates in opposition to the ball's motion. If not, it will continue to roll indefinitely.
Therefore, The friction force is brought on by static friction; it has no effect on releasing energy or producing net work.
Learn more about unbalanced force here:
https://brainly.com/question/19054208
#SPJ2
3 write
down
two method to increase
any
the effiencey of a simple machine.
Ang two method to increase the effienee.
of a simple machine aree
ns
y of
1)
Answer:
two method of increasing efficiency of machine are 1st is give lubricants to machine to reduce friction or heat loss and
2nd. is by increasing the input of energy
a cellphone weighing 80 g is flying to the air at 15 m/s what is it's kinetic energy
Answer:
9J
Explanation:
Given parameters:
Mass of cell phone = 80g
1000g = 1kg
80g is therefore 0.08kg
Velocity of the cellphone = 15m/s
Unknown:
Kinetic energy of the cellphone = ?
Solution:
The kinetic energy of a body is the energy due to its motion.
It is expressed as:
K.E = [tex]\frac{1}{2}[/tex] mv² = [tex]\frac{1}{2}[/tex] x 0.08 x 15² = 9J
Helium ballon containing 5m3 of Gad at a pressure of 30pka is released. If the temperature is constant calculate the volume the balloon would have when the pressure inside the ballon has fallen to 5kpa answer in metres cubed
Answer:
30m³
Explanation:
Calculation for the volume the balloon would have
First step is to calculate the Constant
Constant=30pka*5m³
Constant=150m³
Now let calculate the Volume using this formula
Balloon Volume=Constant/ Pressure
Let plug in the formula
Balloon Volume=150m³/5kpa
Balloon Volume=30m³
Therefore the volume that the balloon would have when the pressure inside the ballon has fallen to 5kpa is 30m³
What word does this define..
The distance traveled per unit of time
Answer:..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Volosity???????
Explanation: THINK THATS IT PROBABLY MISPELLED IT SORRY IN ADVANCE IF WRONG
HELLLPPPPPPPPPPPPPPPPPP
Answer:
If you going to ask a question ask it accurately.
Explanation:
If an atom gains a neutron, what happens to the atom?
Answer:
If an atom gains a neutron, the atom becomes an isotope, which means that it has the same atomic number (#of protons) but a different atomic mass because it has gained the mass of 1 neutron
Can anyone help me with these questions? TIA!
(Don’t actually answer please! :) )
[tex]\huge\text{Graphs:}[/tex]
The graph of
• The I-V for Ohmic Metal wire conductor at constant temperature always shows a straight line between the Current(I) plotted at Y axis and Voltage(V) plotted at X axis. Picture 1
• The I-V graph for Diode shows that first the current is zero but as we increase the potential difference(voltage), it results in the increase in the current. Picture 2
_____________________________________ Question 8:[tex]\Large\textbf{Diode:}[/tex]
A diode is a device that allows current to flow in only one direction.
[tex]\Large\textbf{Forward and Reverse Biasing:}[/tex]
Forward Bias, When a diode is forward bias (a voltage in the "forward" direction) then the P-side of the diode is attached to the positive terminal and N-side is fixed to the negative side of the battery which is connected, current flows freely through the device. The forward bias decreases the thickness of potential barrier(The potential barrier barrier in which the charge requires additional force for crossing the region)
Reverse Bias, When a diode is Reverse bias(a voltage in the "backward direction) then the P-side of the diode is connected to the negative terminal and N-side is connected to the positive terminal of the battery which is connected. The reverse bias increases the thickness of the potential barrier resulting in the flow of no current.
[tex]\Large\textbf{Answer to the Question "Resistance"}[/tex]
The Forward bias decreases the resistance of the diode whereas the reversed bias increases the resistance of the diode. As in forward biasing the current is easily flowing through the circuit whereas reverse bias does not allow the current to flow through it.
_____________________________________ Best Regards, 'Borz'What energy is present when a magnet is moving?
Answer:
kinetic energy is when an object is moving
Two atoms each contain 6 protons, but one has 6 neutrons and the other has 8 neutrons. What are these atoms called? A. ions B. radicals C. isotopes D. binaries
Answer:
These atomos are called isotopes.
Explanation:
Each chemical element is characterized by the number of protons in its nucleus, which is called the atomic number (Z).
The number of neutrons in the nucleus can vary. There are almost always as many or more neutrons than protons. The atomic mass (A) is obtained by adding the number of protons and neutrons in a given nucleus.
The same chemical element can be made up of different atoms, that is, their atomic numbers are the same, but the number of neutrons is different. These atoms are called isotopes of the element. That is, isotopes are atoms whose atomic nuclei have the same number of protons but different numbers of neutrons.
So, these atomos are called isotopes.
Two trucks with equal mass are attracted to each other with a gravitational force of 6.7 x 10^-4 N. The trucks are separated by a distance of 3.0 m. What is the mass of one of the trucks?
Answer:
9508.1kg
Explanation:
Given parameters:
Gravitational force = 6.7 x 10⁻⁴N
Distance of separation = 3m
Unknown:
Mass of one of the truck = ?
Solution:
Let the mass of one of the truck be = m
According to the Newton's law of universal gravitation:
Fg = [tex]\frac{G m1 m2}{d^{2} }[/tex]
G is the universal gravitation constant = 6.67 x 10⁻¹¹
m1 and m2 are the masses of the two bodies, here m1 = m2 = m
d is the distance of separation between them
6.7 x 10⁻⁴ = [tex]\frac{6.67 x 10^{-11} x m^{2} }{3^{2} }[/tex]
6.67 x 10⁻¹¹m² = 9 x 6.7 x 10⁻⁴
m = 9508.1kg
The mass of one of the trucks is 9510 kg.
The problem above can be solved using the mathematical expression of newton's law of universal gravitation
Using Newton's law of universal gravitation,
F = Gm²/r²................... Equation 1
Where F = Gravitational force on the truck, m = mass of each truck, r = distance between the trucks, G = universal constant
make m the subject of the equation
m = √(Fr²/G)................ Equation 2
From the question,
Given: F = 6.7×10⁻⁴ N, r = 3.0 m.
Constant: G = 6.67×10⁻¹¹ Nm²/kg²
Substitute these values into equation 2
m = √[(6.7×10⁻⁴×3²)/(6.67×10⁻¹¹)]
m = √(9.04×10⁷)
m = 9.51×10³ kg.
m = 9510 kg
Hence, The mass of one of the trucks is 9510 kg
Learn more about Newtons law of universal gravitation here: https://brainly.com/question/9373839
4) Which is the BEST description of a tectonic plate? *
O A. Tectonic plates consist of the lithosphere and part of the asthenosphere.
O B.Tectonic plates are large pieces of mesosphere that never move.
C. Tectonic plates are large pieces of lithosphere that move on tope of the
asthenosphere.
O D. None of these answers is correct.
Answer:
The answer is A
Explanation: i took k12
A vertical spring with a force constant of 26 N/m has a relaxed length of 35 cm. A 200 g mass is then
attached to the end of the spring and is allowed to come to rest. (a) Find the length of the stretched spring.
(b) How much elastic potential energy is stored in the spring?
I just need the work please the answers is
(a) 45.2 J
(b) 0.0739
Answer:
(a) The length of the stretched string is approximately 42.53846 cm
(b) The elastic potential energy stored in the string is approximately 0.073877 Joules
Explanation:
(a) The given parameter are;
The force constant of the vertical spring, k = 26 N/m
The relaxed length of the spring, L = 35 cm = 0.35 m
The mass attached to the end of the spring, m = 200 g = 0.2 kg
By Hooke's law, we have;
F = k·x
Where;
F = The applied force on the sting = The weight of the attached mass, W
∴ F = W
The weight of the attached mass, W = m × g
Where;
g = The acceleration due to gravity ≈ 9.8 m/s²
Therefore, F = W = 0.2 kg × 9.8 m/s² = 1.96 N
From Hooke's law, we have;
x = F/k = 1.96 N/(26 N/m) ≈ 0.0753846 m
The extension of the stretched spring, x ≈ 0.0753846 m
The length of the stretched string, L[tex]_{stretched}[/tex] = L + x
∴ L[tex]_{stretched}[/tex] ≈ 0.35 m + 0.0753846 m ≈ 0.4253846 m
0.4253846 m = 42.53846 cm
The length of the stretched string ≈ 42.53846 cm
(b) The elastic potential energy stored in the string, U = 1/2·k·x²
By substituting the known values, we get;
U = 1/2 × 26 N/m × (0.0753849 m)² ≈ 0.073877 Joules
if I accelerated at a rate of 20 mi/hr/s how fast would I be going after 5 seconds?
Answer: 100
Explanation: 20 *5=100
Hope this helps!!Brainlist?plz