From the calculation, the enthalpy of the reaction is -56.8 kJ/mol.
What is the enthalpy of the reaction?We know that the enthalpy has to do with the energy that may have been absorbed or evolved in a reaction. We know that in the case of the reaction that we have, the reaction occurs as follows; [tex]NaOH(aq) + HCl(aq) ---- > H_{2} O(l) + NaCl[/tex]
The we have the following;
Number of moles acid = 1 M * 100/1000 = 0.1 moles
Number of moles of the base = 1 M * 100/1000 = 0.1 moles
In this case the reacting moles of the acid and the base are equal
Mass of the acid solution = 100 g
Mass of the base solution = 100 g
Total mass of the solution = 200 g
We then have the heat as;
H = mcdT
m = mass of the solution'
c = Heat capacity of the solution
dT = temperature change
Now;
H = 200 * 4.18 * (26.1 - 19.3)
H = 5.68 kJ
Then the enthalpy of the reaction is; -(5.68 kJ)/0.1 moles
= -56.8 kJ/mol
Learn ore about enthalpy:https://brainly.com/question/3393755
#SPJ1
Foods that are high in blank have the least impact on slowing the body's absorption rate of alcohol.
Foods that are high in carbohydrates have the least impact on slowing the body's absorption rate of alcohol.
What is human digestive system?
The digestive system of the human body is made up of the gastrointestinal tract and additional digestive organs (the tongue, salivary glands, pancreas, liver, and gallbladder). In order for food to be absorbed and incorporated into the body, it must first be broken down into smaller and smaller components during digestion. Cephalic, gastric, and intestine phases make up the three
Our body will immediately start absorbing alcohol when you are hungry. However, because alcohol is not soluble in fat, fatty foods effectively create a barrier through which it cannot easily travel. This will greatly slow down alcohol absorption.
Hence, foods that are high in carbohydrates have the least impact on slowing the body's absorption rate of alcohol.
To know more about digestive system from the given link
https://brainly.com/question/18639907
#SPJ4
WHo is heisenberg I cant figure it out and my friends say im super unsmart for not knowing this
think about the materials used to make a car.Some materials are glass,steel,leather, and paint choose any "three" materials for each one describe one property that makes it useful in a car
Steel is used to create the chassis that forms the skeleton of the car and protects it in the event of a crash. The glass is transparent and heat resistant. Paint serves as a protective coating to protect the vehicle from damage.
How are Steel sheets used in cars?Steel can be described as a very hard and strong alloy that has a very high strength-to-weight ratio. All these properties can make it a suitable material for car bodies.
In cars, steel is used to form the underlying chassis or cage beneath the car body that creates the skeleton of the vehicle and protects it in a crash. Door beams, body panels, and roofs are created while auto manufacturing is composed of steel on most cars.
Most of the steel is found in the skeletal car body, generally called the “body in white,” which is the foundation of the rest of the vehicle is created.
The types of steel used such as stainless steel, high-strength steel, high or low carbon, or galvanized steel for body panels. These types of steel can be used in the production of several vehicle and engine components.
Learn more about steel, here:
https://brainly.com/question/23427935
#SPJ2
How many electrons in an atom can have the following quantum numbers? n = 5, ℓ = 2, mℓ = -2, ms = +½.
The possibility of the presence of maximum number of electrons in an atom with the quantum numbers n = 5, ℓ = 2, mℓ = -2, ms = +½. is 8.
Generally, n is called principal quantum number and it indicates the energy levels or energy shells in an atom.
While m represent the magnetic quantum numbers and it shows the total number of electron which share these quantum numbers.
When n = 5 for an electron, then the value of l can be l = {0; 1 ; 2 ; 3; 4} and the values of magnetic quantum numbers lie between -l and + l.
When m1 = 1 then l can be {1 ; 2 ; 3; 4} and similarly, the spin quantum number can have values between m(s) = { +1/2, -1/2}
To put it simply, electrons with opposite spin share only one orbital and thus there will be total 8 electrons.
n = 5, l = 1, m1 = 1 and ms = ± 1/2
If you need to learn more about quantum numbers click here:
https://brainly.com/question/2292596
#SPJ4
Which statement(s) best describe why table sugar is
considered a pure substance?
SELECT ALL THAT APPLY
a Sugar is a mixture of pure compounds
d
b A bowl of sugar contains only one compound
c Sugar is solid like all other pure substances
Sugar cannot be separated further by physical
means
Sugar has the same chemical composition
e throughout
Best describe table sugar is considered a pure substance is Sugar has the same chemical composition throughout
Table sugar is pure sucrose derived from sugar beet or sugar cane and sucrose is the disaccharide consisting of glucose and fructose and it is produced by green plant in the process of photosynthesis and since the chemical composition of sugar is definite and does not vary hence it is pure substance and table sugar refer to standard while white sugar that you see in your cooking baking or cup of tea at home and the scientific name foe table sugar is sucrose
Know more about pure substance
https://brainly.com/question/143254
#SPJ1
1. What is TRUE about hair samples from a human body?
Hair morphology stays the same as an individual gets older.
O
Every hair taken from the same scalp has matching physical characteristics.
O
Physical properties can be used to most accurately individualize hair.
Hair samples can be different even when taken from the same person.
Hair samples can be different even when taken from the same person
is true about the human body.
What is Hair samples?
A collection of hair strands known as a hair sample is most frequently taken from a person's head. Hair from the past year is typically present in hair samples. Despite the fact that hair growth varies, 5 inches of hair are typically added in 12 months.
What is physical properties of hair?
Elasticity, stiffness, cross-sectional area, form, density, and static charge are some of these characteristics. These attributes, along with hair's resistance to water and stretching, all affect how it looks on a daily basis.
Hence Hair samples can be different is a correct answer.
To know more about Hair samples energy follow link
https://brainly.com/question/1808352
#SPJ1
Calculate the number of molecules of NO2 in 0.25 mol of NO2 . Please show your work to receive credit.
Calculate the number of molecules of NO2 in 0.25 mol of NO2 . Please show your work to receive credit.
The total number of moles are given by n = 0.25 moles and N=6.022×10²³molecules/mole is the Avogadro number. N is equal to 6.0220 × 10²³ molecules/mole. Therefore, there are 1.51 × 10²³ molecules overall 1.05 × 10²³ molecules.
What is mole ?The International System of Units uses the mole symbol as mol as the unit of material quantity. How many elementary entities of a certain substance are present in an item or sample is determined by the quantity of that material. It is specified that the mole contains precisely 6.022 × 10 ²³ elementary entities.
The term was generally first used by German chemist Wilhelm Ostwald. However, the Latin term moles, which meaning "a mass," is where the word mole ultimately originates, not from German. A comparable term to mole is molecule, it is the diminutive and means "a little mass."
Therefore, there are 1.51 × 10²³ molecules overall 1.05 × 10²³ molecules.
To learn more about mole follow the link below;
https://brainly.com/question/26416088
#SPJ1
to a friend's house in 40 minuter. The two
house in 20 mine tes
11. A roller coaster accelerates from 20 m/s to 80 m/s in 2 seconds as it
goes from the top to the bottom of the hill. The mass of the roller coaster
is 1,000 kg. How much force is the roller coaster generating at the bottom ots
of the hill?
A. 30,000 N
B. 80,000 N
C. 12,5 N
D. 20,000 N
The force that the roller coaster is creating under the top of the hill is A) 30000 N.
It is given that the initial velocity is 20m/s and final velocity is 80m/s and the time is 2s.
The force required to accelerate a mass from 20 m/s to 80 m/s in 2 seconds is given by the equation:
F = (m * (v - u)) / t
where m is the mass of the object, v is the final velocity, u is the initial velocity, and t is the time.
Substituting the values given in the question, we get:
F = (1000 kg x (80 m/s - 20 m/s)) / 2 s
F = 1000 x 30
F = 30,000 N
Hence, the correct option is A) which is 30000N. It is the force generated by the roller coaster at the bottom of the hill.
To know more about acceleration, click below:
https://brainly.com/question/460763
#SPJ1
A lustrous cube is measured by a student using a ruler:
w=2.05±0.05 cm
1=2.10 ± 0.05 cm
h=2.15±0.05 cm
The mass found using a digital lab scale:
m= 22.304±0.001 g
Is it possible that the cube is made from aluminum (d>aluminum=2.70 g/cm³) assuming that no human errors have been made?
Please help
Yes, it is possible that the cube is made out of aluminum.
It is known to us that the density of aluminum is 2.7 g/cm³. The weight of the cube is 22.304 g and the dimensions of the cube are 2.05 cm x 2.10 cm x 2.15 cm. The volume of the cube is computed by,
Volume of cube = a³
a³ = (2.1)³
= 4.428 cm³.
If you divide the weight of the cube by the volume of the cube, we get
Density = 22.304/4.428
= 5.04 g/cm³.
This is close to the density of aluminum, so it is possible that the cube is made out of aluminum. If the student had made errors in their measurements, it is possible that the cube is made out of another material.
But if there were no errors in the making of the cube, there is a high possibility that the cube is made out of aluminum. As aluminum is in fact a lustrous metal and is light in weight.
To know more about mass, click below:
https://brainly.com/question/19385703
#SPJ1
BRAINLY to whoever can answer this simply
Based on your knowledge of chemistry, explain what the reactants and the products of the chemical reaction are.
Thank you :)
Answer: Reactants are starting materials and are written on the left-hand side of the equation. Products are the end result of the reaction and are written on the right-hand side of the equation.
Explanation:
Hope this helps!! And you're welcome!
The hydrides of group 5a are nh3 , ph3 , ash3 , and sbh3. Arrange them from highest to lowest boiling point.
The hydrides of group 5a are NH₃ , PH₃ , AsH₃ , and SbH₃, the arrangement of these from highest to lowest boiling point is SbH₃ > NH₃ > AsH₃ > PH₃
The boiling point is the temperature at which the vapor pressure of any liquid equals the pressure of the gas above it. The boiling point depends on the molecules' intermolecular forces and molecular weight. To arrange the given molecules according to the boiling point, we look at the molecular weight and the intermolecular forces. Due to the high molecular weight SbH₃ shows the highest boiling point. N shows 2nd highest boiling point due to high H-bonding, the least boiling is shown by PH₃.
You can also learn about intermolecular forces from the following question:
https://brainly.com/question/9007693
#SPJ4
When performing today’s experiment you leave the lid off your setup for the calibration. You remember that you left it off and decide to add it when determining the heat lost by the metal. When performing your calculations, you determine that your heat capacity values are off. Would your values be too high or too low?.
Due of the heat loss, the heat capacity values discovered will be too low.
The values for a substance's heat capacity are the amount of heat needed to increase a substance's unit mass by one degree Celsius is referred to as its heat capacity. The calorimetry method is employed to ascertain a substance's heat capacity. It is assumed that no heat is wasted during the procedure when using the calorimetry method. According to the principle, the amount of heat gained and lost is equal.
Therefore, the heat capacity value will be lower than the actual values if heat is lost from the calorimeter when estimating the heat capacity of a substance.
To know more about heat capacity, please refer:
https://brainly.com/question/27991746
#SPJ1
If one-eighth of the mass of the original smple of a radioisotope remains unchanged after 4,800 years, the isotope could be? Show all work and explanation.
A. H-3
B. K-42
C. Sr-90
D. Ra-226
Based on the half-life of the material, the isotope is radium-226; option D
What is the half-life of a substance?The half-life of a substance is the time taken for half of the amount of material present in the original sample of the material to decay.
The half-life of materials differs from each other. The half-life may be in millions of years for some materials, whereas for some materials, the half-life could only be in seconds.
The half-life of materials is constant.
Considering the given material;
One-eighth of the mass of the original sample of the radioisotope remains unchanged after 4,800 years.
For one-eight of the material of the isotope to remain, the number of half-lives it has undergone will be;
after one half-life = half of the original sample remains
after two half-lives = one-fourth of the original sample remains
after three half-lives = one-eight of the original sample remains
The half-life of the isotope = 4800/3
The half-life of the isotope = 1600 years
Radium-226 has a half-life of 1600 yers
Learn more about half-life at: https://brainly.com/question/1160651
#SPJ1
Which area of science is considered the central science?
Answer:
Chemistry
Explanation:
Chemistry is often called the central science because of its role in connecting the physical sciences, which include chemistry, with the life sciences and applied sciences such as medicine and engineering. The nature of this relationship is one of the main topics in the philosophy of chemistry and in scientometrics.
if you found a chemical substance that has a low concentration ld50 , what do you expect to see in your test animals when exposing them to the chemical? group of answer choices
When expose to the chemicals, species are highly susceptible to the poison.
What is concentration?
A substance's concentration is the amount of solute present in a given amount of solution. Molarity is the number of moles of solute in one liter of solution and is used to express concentrations.
The LD50 can be calculated for any route of administration, including dermal and oral contact or ingestion of chemicals. A species with a high LD50 has a high tolerance to the poison. A low LD50 indicates that the species is extremely vulnerable to the poison.
To learn more about concentration from the given link:
https://brainly.com/question/17206790
What is the mass of 5.6 x 10^22 atoms of sulfur?
The mass of sulfur 5.6 × 10²² atoms of sulfur is 2.975 gram
The Avogadro law states that an equal volume of the gases at the same temprature and pressure contain the same number of molecule
1 mole = 6.022×10²³ atm
Then the molar mass of sulfur = 32g/mol
That means 1 mole of sulfur is composed of 32 g weight which contain = 6.022×10²³
If 1 mole of sulfur = 32 g = 6.022×10²³
The mass of sulfur that is contained in 5.6 × 10²² atoms of sulfur is
x = 5.6 × 10²² × 32 g /6.022×10²³
x = 2.975 gram
Therefore we can conclude that the mass of sulfur that would have precisely 5.6 × 10²² atom of sulfur is 2.975 gram
Know more about sulfur
https://brainly.com/question/14209545
#SPJ1
which isoelectronic series is correctly arranged in order of increasing radius? question 12 options: a) ca2 < ar < k < cl- b) ca2 < k < ar < cl- c) ca2 < k < cl- < ar d) k < ca2 < ar < cl- e) cl- < ar < k < ca2
b) Ca2 < K < Ar < Cl-
In Isoelectric series ions group contains the same number of electrons.
Here, the ionic radius of Ca2 is 100pm, K is 138pm, Ar is 181pm and Cl- is 184pm.
In option a, Ar has higher ionic radius than k which is incorrect. In option c, cl- higher ionic radius than Ar which is incorrect too. In option d, K has higher ionic radius than Ca2 which results in incorrect. In option e, Cl- has the highest ionic radius among all, which results in incorrect too.
To know more about Isoelectric series
https://brainly.com/question/5584697
#SPJ4
in the experimental procedure, what is the advantage to performing the reaction in methyl ethyl ketone - a solvent with a high boiling point?
The advantage to performing the reaction in methyl ethyl ketone - a solvent with a high boiling point is to carry the reaction in the forward direction by refluxing the set.
What is boiling point?Boiling point is defined as the bulk phenomenon. It is the temperature at which the pressure of atmosphere is equal to the pressure of the vapour or vapour pressure.
Since, high boiling point solvent are used during the procedure to reflux the set which help in carrying out the reaction in the forward direction. If we had used low boiling point solvent instead of high all of the solvent evaporated and refluxing of the mixture of reaction to get product for maximum production could not have been possible.
Thus, we concluded that the advantage to performing the reaction in methyl ethyl ketone - a solvent with a high boiling point is to carry the reaction in the forward direction by refluxing the set.
learn more about boiling point:
https://brainly.com/question/14771622
#SPJ4
H2Se(g) + 4 O2F2(g) SeF6(g) + 2 HF(g) + 4 O2(g)
30. Which of the following is true regarding the reaction represented above?
(A) The oxidation number of O does not change.
(B) The oxidation number of H changes from −1 to +1.
(C) The oxidation number of F changes from +1 to −1.
(D) The oxidation number of Se changes from −2 to +6.
(E) It is a disproportionation reaction for F.
H2Se(g) + 402F2(g) ⇒SeF6(g) + 2HF(g) + 4O2(g) is true regarding following points ;
B. the oxidation number of H changes from -1 to +1 we can see as in H2Se changes to 2F.
C. the oxidation number of F changes from -1 to +1 we can see in O2F2 to
4O2.
D. the oxidation number of Se changes from -2 to +6 as we can see in H2Se to SeF6.
oxidation number also called oxidation state, is the total number of electrons that an atom either gains or loses in order to form a chemical bond with another atom.
disproportionation reaction is the type of reaction when the compound is converted into 2 oxidation states one of higher and one of lower oxidation state.
learn more about oxidation number here;
https://brainly.com/question/27239694
#SPJ4
calculate how many grams are in :
2 moles of hydrogens atoms
Answer: 4 grams
Explanation:
The weight of one mole of hydrogen gas is 2 grams.
hence,there are 4 grams in 2 moles of hydrogen atom.
Compare and contrast metallic and ionic bonds, including the element groups they are made of, the behavior of electrons, and their typical properties.
The metallic bonds and the ionic bonds do involve charged species while the covalent bonds do not involve charged species.
What are metallic bonds?The term bond has to do with the interactions that holds two atoms together. There are different kinds of bonds that we have in chemistry and these include;
Ionic bondMetallic bondCovalent bondThe ionic bond involves the transfer of electrons from one atom to another usually from a metal to a non metal. This results in the formation of ions. In the metallic bond, there is a sea of electrons that lies over metallic ions. In the case of the metallic bonds and the ionic bonds, there are charged species that are present in the system.
For the covalent bonds, there is a sharing of electrons in the bond and then many of the compounds that have the covalent bonds are fond to be nonpolar.
Learn more about ionic bonds:https://brainly.com/question/11527546
#SPJ1
Select one or more correct answers.
Hakeem is testing the effects of sunlight on samples of soil. Which of these actions would introduce confounding variables into Hakeem’s experiment?
A. He tests a theory that’s already been established.
B. He tests multiple hypotheses at a time.
C. He uses identical specimens when completing multiple trials.
D. He adjusts the independent variable and records the effects.
E. He uses different types of soil in each of his samples.
He tests multiple hypotheses at a time and He uses identical specimens when completing multiple trials.
The two options are correct B,C.
Which four sorts of experiments are there?While experimentation as a whole encompasses this form of research, individual research designs have certain characteristics. The four main design types that are pertinent to user experience design are appropriate in this study, scientific, and developed a semi.
A true experiment is what?Any randomized experiment may occasionally be referred to as a real experiment. In other cases, the phrase "true experiment" is used to refer to any investigations that have at at one continuous dependent variable and at least one free variables that is experimentally changed. When experiments are also used to determine whether a theory-based idea, axiom, or phenomenon is true, they play a crucial role in the evolution of science.
To know more about Experiment visit:
https://brainly.com/question/12192140
#SPJ1
What could the fourth quantum number of a 2s² electron be?
O A. mg = -1
O B. ms = 0
O C. mg = +1
O D. mg = + 1/
ANSWER PLS!!
The fourth quantum number of a 2s² electron is -1/2.
What is quantum number?
Quantum numbers are the collection of numbers used to characterise the position and energy of an electron in an atom.
A quantum number is a value used to describe the energy levels that atoms and molecules have. For the hydrogen atom, an electron has four quantum numbers that define its state and produce solutions to the Schrödinger wave equation.
The quantum numbers are as follows:
n - the primary quantum number, which describes the energy level
l denotes azimuthal or angular momentum. quantum number: defines the subshell ml or m - magnetic quantum number: defines the subshell orbital ms or s - spin quantum number: defines the spin
In your scenario, you must decide which possible values can be ascribed to an electron's fourth quantum number in a 2 s 2 orbital.
The electron's energy level, or shell, is described by the primary quantum number. Because the electron is on the second energy level in this situation, n = 2.
The subshell in which the electron is placed is described by the angular momentum quantum number, l. The angular momentum quantum number for an s-orbital is equal to l = 0.
The magnetic quantum number, m l, specifies the orbital in which the electron can be found.
Because it is dependent on the s-orbital, the magnetic quantum number can only take the value 0.
Therefore , fourth quantum number of a 2s² electron is -1/2.
Learn more about quantum number from given link
https://brainly.com/question/2292596
#SPJ1
Students created the electromagnet you see here on the left. Mary's group had some bar magnets on the lab bench and brought one close to the electromagnet. Based on the illustration you see here, determine which statement is not correct. ( DO NOT GIVE ME A PATHETIC ANSWER)
Answer:
bro Ur in my school lol
Explanation:
Answer:
Explanation:
There will be no attractive or repulsive force between the two types of magnets. its A i took this quiz and got it correct. ^^
at what trophic level does the fish appear in food web in 2d?
Fishes typically fall into the trophic levels of 2 to 4.7, while marine mammals fall into the trophic levels of 3 to 5.5 and cephalopods fall into the trophic levels of 3.2.
What is tropic level ?The place an organism holds in a food chain determines its trophic level. A food chain is a series of living things that consume other living things and may eventually consume themselves. An organism's trophic level is determined by how far down the food chain it is.
A trophic level in an ecosystem is a stage in the food chain or nutrient cycle. The distance a creature is from the start of the food chain, in simple terms, indicates its trophic level.
Thus, the fishes typically fall into the trophic levels of 2 to 4.7, while marine mammals fall into the trophic levels of 3 to 5.5 and cephalopods fall into the trophic levels of 3.2.
To learn more about tropic level follow the link below;
https://brainly.com/question/15065872
#SPJ1
which of the following does not influence the speed of a chemical reaction? a) concentration of reactants b) nature of reactants c) temperature d) presence of a catalyst e) none of these
All of the options mentioned above influence the speed of a chemical reaction. Only the molecularity of the reaction doesn't influence the rate of the reaction.
What is a Chemical reaction?
A chemical reaction is a procedure that causes one group of chemical substances to change chemically into another. Chemical reactions are typically defined as changes that only affect the positions of electrons in the formation and dissolution of chemical bonds between atoms, with really no alteration to the nuclei. These changes are frequently captured by a chemical equation. The study of chemical reactions involving unstable and radioactive elements, where both electronic as well as nuclear changes may take place, is known as nuclear chemistry.
Reactants or reagents are the substance(s) or substances that are initially utilised in a chemical reaction. Chemical reactions typically involve a chemical change and produce one or even more products, which typically differ from the reactants in some ways.
To learn more about chemical reaction click on the given link:
https://brainly.com/question/11231920
#SPJ4
Cyclohexanol, C6H₁1OH, is an organic chemical used in the production of nylon.
How many hydrogen atoms are in 2.25 moles of cyclohexanol? Give your
answer in scientific notation.
5.09 x 1025
1.63 x 1025
9.62 x 1024
1.49 x 1025
The number of atoms of hydrogen present in 2.25 moles of cyclohexanol, C₆H₁₂O is 1.63×10²⁵ atoms
How do I determine the number of atoms?First, we shall determine the number of moles of hydrogen present in 2.25 moles of cyclohexanol, C₆H₁₂O. This is shown below
1 mole of cyclohexanol, C₆H₁₂O contains 12 moles of hydrogen, H
Therefore,
2.25 moles of cyclohexanol, C₆H₁₂O, NF₃ will contain = 2.25 × 12 = 27 moles of hydrogen, H
Finally, we shall determine the number of atoms of hydrogen pressnt in 2.25 moles of cyclohexanol, C₆H₁₂O. This can be obtained as follow:
From Avogadro's hypothesis,
1 mole of hydrogen = 6.02×10²³ atoms
Therefore,
27 moles of hydrogen = 27 moles × 6.02×10²³ atoms
27 moles of hydrogen = 1.63×10²⁵ atoms
Thus, we can draw our conclusion that the number of atoms of hydrogen present is 1.63×10²⁵ atoms
Learn more about number of atoms:
https://brainly.com/question/20712650
#SPJ1
Why does the developing chamber need to be prepared before adding the tlc plate?.
The developing chamber needs to be prepared before adding the tlc plate in order to ensure that the plate is placed in the correct position and to prevent contamination.
What is TLC?
Non-volatile mixtures can be separated using the chromatography technique known as thin-layer chromatography (TLC). A sheet of an inert substrate, such as glass, plastic, as well as aluminium foil, is used for thin-layer chromatography. This substrate is coated with a thin layer of an adsorbent material, typically silica gel, aluminium oxide (alumina), as well as cellulose. The stationary phase refers to this adsorbent layer. A solvent as well as solvent mixture (referred to as the mobile phase) has been drawn up the plate by capillary action after the sample has been placed on the plate. Separation is accomplished because various analytes ascend this same TLC plate at various rates.
The developing chamber should be ready before the TLC plates are added, allowing the chamber time to become saturated with the developing solvent and producing quicker, more consistent results.
To learn more about TLC click on the given link:
https://brainly.com/question/14219599
#SPJ4
of the following oxides, is the most acidic. question 5 options: a) co2 b) al2o3 c) na2o d) cao e) li2o
Among the following oxides Al2O3 is the most acidic.
An acidic oxide is an oxide that when combined with water gives acid. A basic oxide is an oxide that when combined with water gives off a base. Consider when a substance reacts chemically, both as a base or acid is termed as amphoteric oxide. Neutral Oxide is one that neither has an acidic characteristic nor a basic one.
Acidic oxides are generally those that are electron deficient species or generally those that have the high oxidation number. Considering this Na2O, Li2O, CaO are metallic oxide of s block. These metallic oxides powerful bases, while Al2O3 is metallic oxide of p block which has comparatively more acidic character. Hence, it is the most acidic oxide among all. CO2 is also a strong acid but it is weaker than Al2O3.
To know more about oxides.
https://brainly.com/question/15578795
#SPJ4
6. The average kinetic energy of water molecules increases
when
1) H₂O(s) changes to H₂O7 at 0°C
2) H₂O changes to H₂O(s) at 0°C
at 10°C changes to H₂O
at 20°C changes to H₂0
H₂O
3)
4) H₂O
at 20°C
at 10°C
The average kinetic energy of water molecules increases when H₂O at 10°C changes to H₂O 20 °C.
The average kinetic energy of the substance increases when it does not undergo a phase change but the temperature will increases. as water molecule when H₂O at 10°C changes to H₂O 20 °C. when it is heated. When the temperature increases the kinetic energy increases. the average kinetic energy is given as :
K = ( 3/2 ) ( R/ Na) T
where,
K = average kinetic energy
R = gas constant
Na = Avogadro's number
T = temperature
Thus, The average kinetic energy of water molecules increases when H₂O at 10°C changes to H₂O 20 °C.
To learn more about kinetic energy here
https://brainly.com/question/11034317
#SPJ1