5. Is the motion of the stars around Polaris (NCP) due to the __________rotation (daily motion) or ___________revolution (yearly motion) of Earth

Answer:

-21.7m

Explanation:

To find the y-component of the vector, we need to find the vertical displacement from the point at the bottom of the vector to the x-axis (or its y-coordinate value).

To calculate this we can create a triangle with the vector as the hypotenuse, the y-axis as the second side and draw an imaginary line from the end of the vector directly horizontally across to the y-axis.

We can use the given angle to find the angle between the y-axis and the angle. Since the angle of a quadrant is 90 degrees, the angle within our triangle must be [tex]90-77.1=12.9[/tex] degrees.

From here, to find the length of the side on the y-axis we can use the trigonometric cos function.

[tex]cos \theta =\frac{adjacent side}{hypotenuse}[/tex]

Therefore [tex]cos 12.9=\frac{y-component}{22.3}[/tex] and [tex]ycomponent = 22.3cos12.9[/tex]

This gives us a value of 21.7 (3.s.f) for our y-component.

Finally, the y-component is also a vector so it also needs a direction. Therefore like its coordinate, its value will be -21.7m.

If you are exercising with a specific goal in mind, such as improved strength or cardio fitness. Exercise training's guiding principles include overload, recuperation, progression, reversibility, and specificity.

Your muscles will remain challenged and you'll get stronger if you change or advance your workouts.

To get the most out of any training programme, you must follow certain rules. You won't benefit much from your workouts if you don't adhere to these rules. Exercise training's guiding principles include overload, recuperation, progression, reversibility, and specificity. The concept of specificity is especially important if your exercise programme is designed to help you achieve a particular goal, like increased strength or improved aerobic fitness.

To know more about training:

https://brainly.com/question/29616285

#SPJ4

By replacing the force system acting on the post with a resultant force and a couple of moments at point o we get total momentum of 1478.85 ft-lb.

As per the figure we have 3 forces: At the top 300lb left side 150lnb and at the middle 200lb.

first, we have to break down the forces into x and y components.

Now calculating each force separately:

∑Fₓ=300lb+cos 30°-150×4/3+200

=259.81-120+200

∑Fₓ=339.81lb.

Now, calculate the sum of y components.

∑Fy=300 sin 30°+150×3/5

∑Fy=300 sin 30°+90

∑Fy=240lb

Now we have to x and y components by these values we can find the actual force.

|F|=√Fx²+Fy²

|F|=√(339.81)²+(240)²                     α=tan⁻¹(∑Fₓ/∑Fy)

|F|=√115470.83+57600                      α=tan⁻¹(339.81/240)

|F|=√173070                                       α=35.23°

|F|=416.02 and 35.23°

the sum of moments at O

∑Mo=-Fx₃×2+Fx₂×4-Fx₁×6

∑Mo=-200(2)+4/5 150*4-3000cos30°(6)

∑Mo=-400+480-277.65

         =1478.85ftlb

∑Mo=1478.85ftlb

To know more about resultant force:

https://brainly.com/question/25239010

#SPJ4

According to the satellites' orbits and the speed at which they move, it either happens frequently or always.

As we begin to examine satellite orbits, we find that a circular orbit places the satellite always perpendicular to the object's net force and speed.

The orbit is stretched, just like in elliptical orbits. This informs us that the orbit has four points. As a result, the satellite rarely faces the satellite's net force in a perpendicular direction.

Rarely and always for elliptical orbits. According to the satellites' orbits and the speed at which they move, it either happens frequently or always.

Learn more about speed here-

https://brainly.com/question/28224010

#SPJ4

Two spherical objects have masses of 8000 KG and 1500 KG their centers are separated by a distance of 1.5 M, the gravitational attraction between them is 3.56 × 10⁻⁴N.

The gravitational force, also known as gravity, pulls objects with mass in the same direction. We frequently think about the Earth's gravitational pull. This force is firmly holding your body in place. But every mass-bearing object attracts other mass-bearing objects toward it through gravity.

Using the formula of gravitational attraction

F = G× M₁M₂/d²

where G = 6.67 × 10⁻¹¹ Nm²Kg⁻²

M₁ = 8000Kg

M₂ = 1500 Kg

F =  6.67 × 10⁻¹¹ × 8000 × 1500 / (1.5)²

F = 3.56 × 10⁻⁴ N

The gravitational force of attraction between them is 3.56 × 10⁻⁴ N.

To know more about gravitational force visit:

https://brainly.com/question/19136576

#SPJ1

Turn your head left and right and glance over your shoulder to view what cannot be seen in the side-view mirrors.

What is mirror ?

An item that reflects an image is a mirror or looking glass. When focused through the lens of the eye or a camera, light that reflects off a mirror will reveal a picture of whatever is in front of it. Mirrors reflect light at an equal but opposite angle, which changes the direction of the image.

What is direction?

Direction can refer to a thing's course, the route one must take to get there in particular, the direction something is beginning to take shape, or the direction you are facing. Going straight instead than left is an example of direction.

Therefore, Turn your head left and right and glance over your shoulder to view what cannot be seen in the side-view mirrors.

Learn more about mirrors from the given link.

https://brainly.com/question/1126858

#SPJ4

The velocity of the ice skater after throwing the snowball is 0.08m/s.

Given data as per the question is,

Mass of ice skater= 65.6kg

Velocity 1= 2.65m/s

Mass of the Snowball= 0.142kg

Velocity 2= 25.2m/s

Conditions before snowball is thrown:

Total mass of skater + snowball = 65.6+ 0.142 = 65.742kg

Total Momentum of skater + snowball = mv = 65.6 x 2.65 = 173.84 kgm/s

Conditions after snowball is thrown:

Let's call the velocity of the skater V.

Total momentum = momentum of skater + momentum of snowball

=65.6V + (4.6434)

= 65.6V + 4.6434

173.84  = 65.6V+4.6434

173.84- 4.6434= 65.6V

169.19=65.6 V

V= 175.156/69.22

V = 2.57m/s

The total momentum after catching the snowball is mV or:

(65.6 + 0.142) x V

So:

4.6434= 65.742V

V= 5.544/69.22

V=0.08m/s

The velocity of the ice skater after throwing the snowball is 0.08m/s

Learn more about momentum:

brainly.com/question/24030570

#SPJ4

The mass of copper that is left unreacted at the end of the chemical reaction is 1.90 g

The mass of copper that is left untreated at the end of the chemical reaction is determined as follows:

Mass of copper before the reaction = 3.55 g

Mass of iodine before the reaction = 4.60 g

Mass of product = 6.25 g

According to the law of conservation of mass;

Mass of reactant = mass of product + mass of unreacted copper

Mass of reactants = 3.55 + 4.60

Mass of reactants = 8.15 g

The difference in the mass of the product obtained and the mass of the unreacted copper

Mass of unreacted copper = 8.15 g - 6.25 g

Mass of unreacted copper = 1.90 g

Learn more about the law of conservation of mass at: https://brainly.com/question/1992248

#SPJ1

Here initial speed u=0m/s    final speed v=26.5 m/s and acceleration due to gravity g=9.81 m/s^2

Where:

m = mass of the object (kg)

g = acceleration due to gravity (9.8 m/s^2)

h = height of the cliff (m)

We know the velocity of the object just before it hits the ground, which is 26.5 m/s. We can use this velocity to calculate the kinetic energy of the object just before it hits the ground.

KE = (1/2)mv^2

As the object is dropped from the cliff, its initial potential energy is converted to kinetic energy. Therefore, the initial potential energy is equal to the final kinetic energy.

GPE = KE

mgh = (1/2)mv^2

We can solve for h by rearranging the equation and substituting the known values for GPE, KE, m, and g.

Simply multiply the acceleration of gravity by the period of time since the object was released to determine the object's speed (or velocity). In other words, velocity is equal to -9.81 m/s2 * time, or V = gt. The item is just traveling downwards when there is a negative sign.

to know more about cliff height here:

brainly.com/question/10726356

#SPJ4

According to the given statement The ships average acceleration is 2790 km/hr².

Rate of change in both speed and direction of motion over time. A point or object going straight forward is accelerated when it accelerates or decelerates. Even though the speed is constant, motion on a circle accelerates because of direction is always shifting

We know that from newton's equation,

v² + u² = 2as

S = ut + 0.5 at²

Where, v = final speed

           u = initial speed

           a = acceleration

           S = distance covered

            t = time taken

Given, u = 0

So the equations becomes:

v² = 2as

S = 0.5 at²

Using these equations we get:

v² = 2a(0.5)at²

v² = a²t²

v = at

v/t = a

Given,  v = 93 km/hr

          t = 2 min = 2/60 hr

Putting these values in above equation we get, a = 2790 km/hr²

So, the ships average acceleration is 2790 km/hr²

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ1

The correct option is option e) cross product

The cross-product is a new way of "multiplying" two vectors. It results in a new vector that is perpendicular to both the original vectors and its magnitude is given by the area of the parallelogram formed by the two original vectors.

In three-dimensional space, cross-product is a binary operation on two vectors. It yields a vector perpendicular to both vectors. a b represents the vector product of two vectors, a and b. Its resulting vector is parallel to a and b. Cross goods are another name for vector products.

The cross-product has four basic applications:

Read more about Cross-Product from:

https://brainly.com/question/14708608

#SPJ4

The magnitude of the gravitational field of the planet depends on its mass and distance from the object being affected by it.

What is Gravitational field?

Gravitational field is a region of space where a mass or object experiences a force of gravity. It is caused by the presence of a massive object, such as a planet or star, which exerts a gravitational pull on other objects within its vicinity. The strength of the gravitational field is determined by the mass of the object and its distance from other objects.

The gravitational field of the planet at Point P can be calculated by using the equation,

g = G*M/r2

where G is the gravitational constant (6.67 x 10-11 Nm2/kg2), M is the mass of the planet (4 x 1026 kg), and r is the distance from the center of the planet to Point P (53,000 km).

Plugging in the values,

g = (6.67 x 10-11 Nm2/kg2) x (4 x 1026 kg) / (53,000 km)2

g = (6.67 x 10-11 Nm2/kg2) x (4 x 1026 kg) / (2.8409 x 1012 m2)

g = (6.67 x 10-11 Nm2/kg2) x (14.1636 x 1015 kg)

g = 9.5 x 10-5 N/kg

Therefore, the magnitude of the gravitational field of the planet at Point P is 9.50 x 10-5 N/kg.

To know more about gravitational field,

https://brainly.com/question/1281551

#SPJ4

Answer: The position of an element on the periodic table, see resources, tells you the type of ions it will form, with the elements on the right forming anions (negative charge) and those further to the left forming cations (positive charge).

Hope this helps any

A mole sample of an ideal gas is gently cooled at constant temperature 320 K.

To learn more about constant temperature refer to:

https://brainly.com/question/21505356

#SPJ4

The kinetic energy of the student at the bottom of the slide with a velocity of 15.21 m/s is 8,557.36 J

The mass of the student = 74 kg

The distance of the slide = 11.8 m

The final velocity at the bottom of the slide can be found using

             v² = u² + 2ax

where v is the final velocity

          u is the initial velocity

          a is the acceleration due to gravity

          x is the distance

Let us substitute the known values,

            v² = 0 + 2 x 9.8 x 11.8

            v² = 231.28

                = √231.28

             v = 15.21

Therefore, the kinetic energy at the bottom of the slide is

         K.E = 1/2mv²

                = 1/2 x 74 x 231.28

                = 8,557.36 J

The kinetic energy of the student is 8,557.36 J

Learn more about the kinetic energy in

https://brainly.com/question/15764612

#SPJ4

Answer:

I think it's b. False

Explanation:

Deoxyribonucleic acid is a polymer composed of two polynucleotide chains that coil around each other to form a double helix.

A nonsense mutation occurs in the DNA when a sequence changes itself and gives rise to a stop codon rather than a codon specifying an amino acid. The presence of the new stop codon results in the production of a shortened protein that is non-functional.

A nonsense mutation is also known as base substitution which results in a stop codon in such a position from where there was not one before, which causes the premature termination of protein synthesis and, more than likely, a complete loss of function in the finished protein.

So we can conclude that a nonsense mutation always causes a loss of amino acids.

Learn more about DNA here: brainly.com/question/16099437

#SPJ1

The region (A to E) along the horizontal axis where a point exists at which the net electric field is zero is point C.

An electric field refers to the physical field surrounding electrically charged particles which exerts force on all other charged particles in the field, either attracting or repelling them. It also refers to the physical field for a system of charged particles. It is defined as the electric force per unit charge. The field direction is taken as the direction of the force it would exert on a positive test charge. The direction of the electric field is always away from the positive charge and towards the negative charge. As seen in the diagram, both positive charges are equidistant from region C, and the strength of charges of the particle is the same in magnitude but opposite in direction, so the net electric field of both charges will be zero in region C.

Learn more about Electric field:

https://brainly.com/question/14372859

#SPJ4

Upon travelling at an altitude of 10.0 km, a passenger aircraft weighing 7.0 x [tex]10^{6}[/tex] N  potential is the energy.

Potential energy and kinetic energy are fundamentally different from one another because one is the energy of what can be and the other is the energy of what is. Or to put it another way, potential energy is immobile and ready to be unleashed;

Due to the object's motion, kinetic energy loses some energy in the form of light energy, heat energy, and friction; these things do not occur in the potential energy, which is the reason why kinetic energy is not more than the potential energy.

To know more about potential energy visit:-

https://brainly.com/question/24284560

#SPJ1

The student with a 59-kg mass moves to the right with a velocity of 1.46 m/s.

According to the law of conservation of momentum, The overall momentum of two or more bodies acting on one another in an isolated system stays constant unless an external force is introduced.

The student with a mass of 48 kg moves to the left with a velocity of 1.8 m/s.

Let the student with a mass of 59 kg moves to the left with a velocity of v m/s.

As no external force applied,

48 kg × 1.8 m/s + 59 kg × v = 0

v = - 1.8 × (48/59) m/s

= - 1.46 m/s.

Hence, the velocity of the second bay is 1.46 m/s in right direct.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ1

Option 1 is correct choice, The ball returns to Dr. Hewitt, stopping almost exactly at the point where it was released.

Potential energy becomes kinetic energy when a stationary item begins to move. When an item in motion stops moving, its kinetic energy transforms into potential energy.

Here, the energy input from the push is transforming into kinetic energy, which would be later transformed into even more potential energy than the ball had at the beginning of the motion.

The component of swinging is called kinetic energy, and it is the speed at which the ball runs back and forth. The most powerful aspect of swinging is potential energy. The ball achieves more potential energy the higher you go on the swing, so When it comes back to Dr. Hewitt, the ball stops almost exactly where it started.

To know more about Potential energy here:

https://brainly.com/question/12807194#

#SPJ4

From the given data, the speed of the tsunami is 789.8 km/h.

The speed of the tsunami is calculated from the relationship between distance travelled by the wave and the time of motion of the wave.

Mathematically, this formula is given as;

v = d / t

where;

From the given data, the speed of the tsunami is calculated as follows;

v = ( 3607 km ) / ( 4.567 hr )

v = 789.8 km/h

Learn more about speed here: https://brainly.com/question/13943409

#SPJ1

The kinetic energy will the ball acquire from the bat is 1.0x10^1 joules or 100 joules. This calculation is based on the equation Energy = Force x Distance, which is a fundamental equation of physics.

The kinetic energy of the ball is equal to the work done by the bat on the ball. The work done by the bat on the ball is equal to the force applied by the bat multiplied by the distance the bat stays in contact with the ball. Therefore, the kinetic energy of the ball would be equal to 2.0x10^4 newtons multiplied by 5.0x10^-3 meters, which is equal to 1.0x10^1 joules or 100 joules.

This calculation is based on the equation of  Energy which is  Force x Distance. Additionally, this equation can be rearranged to solve for any of the variables, depending on what is known and what needs to be calculated. In this case, the known variables were the force applied by the bat and the distance the bat stayed in contact with the ball, and the variable that needed to be calculated as the kinetic energy of the ball.

To know more about kinetic energy refer to the link  brainly.com/question/26472013

#SPJ4

The three key words that have been replaced in the cross - section of a solar panel are:

This means that Option A is correct.

A solar panel, also known as a photovoltaic (PV) panel, is a device that converts sunlight into electricity. It is made up of several different parts that work together to generate electricity. Solar cells are made of silicon and are responsible for converting sunlight into electricity. They are usually arranged in a grid pattern on the panel.

The backsheet is the layer of material that sits on the back of the solar cells. It is responsible for protecting the back of the solar cells from moisture and other environmental factors. It is an insulator and is shown as R.

There are also the copper wires which heat the water and they are painted black as black absorbs heat better. These are labeled S and T respectively.

Find out more on solar panels at https://brainly.com/question/28996669

#SPJ1

The spring with the higher spring constant (15.0 N/cm) will be more difficult to stretch than the spring with the lower spring constant (10.0 N/cm).

This is because the spring constant is directly related to the amount of force required to stretch the spring. Therefore, the higher the spring constant, the more force that is required to stretch the spring.

The spring constant is a measure of how difficult it is to stretch or compress a spring. It is determined by the stiffness of the spring material, its shape and size, and how much the spring is compressed or stretched.

The higher the spring constant, the more force is required to stretch or compress the spring. The lower the spring constant, the less force is required to stretch or compress the spring.

Learn more about the spring:

https://brainly.com/question/1968517

#SPJ4

Since the displacement is a vector quantity, the distance is 11 miles while displacement is 8.5 miles

Displacement is a distance travelled in a specific direction. Distance is a scalar quantity while displacement is a vector quantity.

Given that Stephen has to drive 8 miles south and 3 miles east to get to work.

His distance will be 8 miles + 3 miles = 11 miles

While his displacement can be calculated by using Pythagoras theorem. That is,

Displacement D = √(8² + 3²)

D = √(64 + 9)

D = √73

D = 8.5 miles

Therefore, his distance is 11 miles and his displacement is 8.5 miles.

Learn more about Displacement here: https://brainly.com/question/2109763

#SPJ1

A 50.0-kg child stands at the rim of a merry-go-round of radius 2.70 m, rotating with an angular speed of 3.95 rad/s. Minimum coefficient of static friction is required 13.56.

To find the minimum coefficient of static friction required, we need to calculate the centrifugal force acting on the child and compare it to the force of friction.

The centrifugal force acting on the child is given by:

= Fc

= m * r * w^2

where

= m

= 50.0 kg (mass of child)

= r

= 2.70 m (radius of the merry-go-round)

= w

= 3.95 rad/s (angular velocity)

So, Fc = 50.0 kg * 2.70 m * (3.95 rad/s)^2

= 6629.775 N

The force of friction acting on the child is given by:

= Ff

= friction coefficient * normal force

where

friction coefficient = minimum coefficient of static friction required (unknown)

= normal force

= m * g

The normal force is equal to the weight of the child, which is

= m * g

= 50.0 kg * 9.8 m/s^2

= 490 N

So, Ff = friction coefficient * 490 N

To find the minimum coefficient of static friction, we need to set Ff equal to Fc and solve for the friction coefficient:

friction coefficient = Ff / N

friction coefficient = 6629.775 N / 490 N

= 13.56

So the minimum coefficient of static friction required is 13.56.

To know more about static friction please refer: https://brainly.com/question/13000653

#SPJ4

A force on the free-body diagram above which represents the normal force acting on the car include the following: D. Force A.

In Science, a free-body diagram can be defined as a graphical illustration which is typically used in the field of science to visualize moments, tension, and applied forces that are acting on an isolated or rigid object (body), while using arrows to point in the direction of these forces.

Since this car was driven to the right, with a large amount of air resistance acting on it, and its engine provides the forward motion, we can reasonably infer and logically deduce that the normal force which is acting on the car is represented by Force A as illustrated by the free-body diagram shown in the image attached above.

Read more on free-body diagram here: https://brainly.com/question/18770265

#SPJ1

When using a 20 ft ladder the distance from a building should be the base of the ladder by 5 ft

The base of a ladder should be positioned one-quarter of the working length of the ladder from the building. Therefore, when using a 20 ft ladder, the base should be positioned 5 ft from the building. Additionally, the ladder should be placed on a solid and level surface, and the feet of the ladder should be securely wedged to prevent slipping.

Extend the top of the ladder three feet above the work table to get access to it, or fasten the ladder at the top.

Learn more about Ladder Safety Self-Study Unit here: https://brainly.com/question/13835992

#SPJ4