Answers
Answer:
it will move in 356.5g in diagonal direction(resultant or between the both direction)
Explanation:
285+428/2=356.5g
Hope u like it
PLZ MARK ME AS BRAINLIEST
Related Questions
A football team lost 3 yards on their first play. On the second play, 10 yards were gained. On the third play the quarterback got tackled behind the line of scrimmage and lost 6 yards. What was their net gain or loss after the three plays?
Answers
+1yd
Explanation:
Kfgjjh
Answer:
+1 YD
Explanation:
-3 + 10 - 6 = 1
Can anybody tell me what I'm suppose to do. I click start the numbers comes up to the right
Answers
QUESTION 2
At the end of an investigation, what should be done if the results do NOT support the hypothesis?
O A Repeat your investigation to ensure your results are accurate and then modify your hypothesis if necessary.
OB. Repeat your investigation over and over again until you get the results that will support your original hypothes
O C. Check your measurement tools to ensure they are working.
OD. Change the topic of your investigation to one that will yield results that support a hypothesis.
Answers
Answer:
A. Repeat your investigation to ensure your results are accurate and then modify your hypothesis if necessary.
Explanation:
Having results that do not support the hypothesis is a common occurrence.
Hypotheses always depend on the data and experiment. If at the end of an investigation the results do not support the hypothesis, the investigation should be be repeated to further confirm this discovery.
And if there is still no correlation, then the hypothesis is not a reasonable explanation for the investigation and should be modified or rejected if necessary.
A 1200 kg car is accelerating at 4.5 m/s2. What is the force on the car?
Answers
Answer:
5400 N
Explanation:
f=ma
f= 1200*4.5
f=5400N
am I right? be honest
Answers
Answer:
I chose c because it is the greater slope at point c
A block of mass m1 = 18.5 kg slides along a horizontal surface (with friction, μk = 0.22) a distance d = 2.3 m before striking a second block of mass m2 = 7.25 kg. The first block has an initial velocity of v = 8.25 m/s.
Assuming that block one stops after it collides with block two, what is block two's velocity after impact in m/s?
How far does block two travel, d2 in meters, before coming to rest after the collision?
Answers
Answer:
19.5 m/s
87.8 m
Explanation:
The acceleration of block one is:
∑F = ma
-m₁gμ = m₁a
a = -gμ
a = -(9.8 m/s²) (0.22)
a = -2.16 m/s²
The velocity of block one just before the collision is:
v² = v₀² + 2aΔx
v² = (8.25 m/s)² + 2 (-2.16 m/s²) (2.3 m)
v = 7.63 m/s
Momentum is conserved, so the velocity of block two just after the collision is:
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
m₁u₁ = m₂v₂
(18.5 kg) (7.63 m/s) = (7.25 kg) v
v = 19.5 m/s
The acceleration of block two is also -2.16 m/s², so the distance is:
v² = v₀² + 2aΔx
(0 m/s)² = (19.5 m/s)² + 2 (-2.16 m/s²) Δx
Δx = 87.8 m
The velocity of block 2 and the distance traveled by it prior to being at rest post-collision are 19.5 m/s and 87.8 m. Check the calculations below:
FrictionGiven that,
[tex]m_{1}[/tex] = 18.5 kg
d = 2.3m
To find,
Acceleration of block 1:
∑[tex]F = ma[/tex]
⇒ -m₁gμ = m₁a
⇒ a = -gμ
⇒ a [tex]= -(9.8 m/s^2) (0.22)[/tex]
∵ a [tex]= -2.16 m/s^2[/tex]
Now,
To determine the velocity of block one prior to the collision:
We know,
The initial velocity of block 1 = 8.25 m/s
⇒ [tex]v^2 = v_{o}^2 + 2[/tex]aΔx
⇒ [tex]v^2 = (8.25 m/s)^2 + 2 (-2.16 m/s^2) (2.3 m)[/tex]
∵ [tex]v = 7.63 m/s[/tex]
We also know,
[tex]m_{2}[/tex] = 7.25 kg
Now,
The velocity of block 2 post collision:
⇒ [tex]m_{1} u_{1} + m_{1} u_{1} = m_{1} v_{1} + m_{2} v_{2}[/tex]post-collision
Through this,
⇒ [tex](18.5 kg) (7.63 m/s) = (7.25 kg) v[/tex]
∵[tex]v = 19.5 m/s[/tex]
The distance can be found through:
⇒ [tex]v^2 = v_{o} ^{2} + 2[/tex][tex]a[/tex]Δ[tex]x[/tex]
⇒ [tex](0 m/s)^2 = (19.5 m/s)^2 + 2 (-2.16 m/s^2)[/tex]Δ[tex]x[/tex]
∵ Δ[tex]x = 87.8 m[/tex]
Thus, 19.5 m/s and 87.8 m are the correct answers.
Learn more about "Friction" here:
brainly.com/question/13357196
A boat initially moving at 10 m/s accelerates at 2 m/s for 10 s. What is the velocity of the boat after 10 seconds?
Answers
Answer:
30 m/s
Explanation:
v = u + at
given that,
u = 10 m/s (initial speed)a = 2 m/s^2 t = 10sv =?(final speed)v = 10 + ( 2 × 10)
v = 10 + 20
v = 30 m/s
why do some athletes get injuries before and after the game?
Answers
Answer:
they don't strech so they tear a muscle when they perform
Explanation:
Why wouldn't carbon dating work to determine the age of the earth?
A) Carbon dating works best on other planets
B) The half life of carbon is too short
C) The age of the earth cannot be determined
D) The half life of carbon is too long.
Answers
Answer:
The half-life of carbon is too short.
Explanation:
The answer is B.
Assume that the particle has initial speed viviv_i. Find its final kinetic energy KfKfK_f in terms of viviv_i, MMM, FFF, and DDD.
Answers
Answer:
KE= 1/2mv²
Explanation:
The kinetic energy of a body is the energy possessed by virtue of the body in motion
Given the parameters
m which is the mass of the body
v which is the velocity of the body too
K.E = kinetic energy
The expression for the kinetic energy of a body is given as
KE= 1/2mv²
the radius of the earth social
Answers
Magnets are usually made up of which material
A. plastic
B. iron ore
C. copper
D. gold
Answers
Answer:
B. iron ore
Explanation:
Hope this helps
plz mark as brainliest!!!!!!
A solid nonconducting sphere of radius R carries a charge Q distributed uniformly throughout its volume. At a certain distance rl (r
(A) E/8
(B) E 78.
(C) E/2
(D) 2E
(E) 8E
Answers
Answer:
A ) E/8
Explanation:
If the sphere of radius R carries charge Q, then the volumetric charge density is:
ρ₁ = [Q/ (4/3)*π*R³]
Therefore the net charge inside r ( r < R ) is:
q₁ = ρ * (4/3)*π*r³
And E = K * q₁/r K = 9,98 *10⁹ [N*m²/C²]
E = K * ρ * (4/3)*π*r³/r
E = K * ρ * (4/3)*π*r²
If now the charge is distributed over a sphere of radius 2R
ρ₂ = [Q/ (4/3)*π*(2R)³]
ρ₂ = [Q/ (4/3)*π*8*R³]
Then ρ₂ < ρ₁ in fact ρ₂ = (1/8)*ρ₁
The electric field depends on the net charge enclosed by a gaussian surface, and the distance between the net charge and the considered point, ( considering the net charge as being at the center of the gaussian surface) In this case, there was no distance change then
E₂ = E₁/8
The right answer is lyrics A ) E/8
A car starts from rest and accelerates for 7.2 s with an acceleration of 1.4 m/s2. How far does it travel? Answer in units of m.
Answers
Answer:
xn = 36.28 [m]
Explanation:
To solve this problem we must use the following equation of kinematics, which is ideal for a body that moves with constant acceleration.
[tex]x=x_{0}+(v_{o} *t)+(\frac{1}{2} )*a*t^{2}[/tex]
where:
x - xo = displacement of the car [m]
Vo = initial velocity = 0
t = time = 7.2 [s]
a = acceleration = 1.4 [m/s^2]
The initial velocity is zero, as the car begins its movement from rest.
xn = (x - xo), Now replacing
xn = (0*7.2) + 0.5*1.4*(7.2^2)
xn = 36.28 [m]
Derivation 1.2 showed how to calculate the work of reversible, isothermal expansion of a perfect gas. Suppose that the expansion is reversible but not isothermal and that the temperature decreases as the expansion proceeds. (a) Find an expression
Answers
Answer:
(a) The work done by the gas on the surroundings is, 17537.016 J
(b) The entropy change of the gas is, 73.0709 J/K
(c) The entropy change of the gas is equal to zero.
Explanation:
(a) The expression used for work done in reversible isothermal expansion will be,
where,
w = work done = ?
n = number of moles of gas = 4 mole
R = gas constant = 8.314 J/mole K
T = temperature of gas = 240 K
= initial volume of gas =
= final volume of gas =
Now put all the given values in the above formula, we get:
The work done by the gas on the surroundings is, 17537.016 J
(b) Now we have to calculate the entropy change of the gas.
As per first law of thermodynamic,
where,
= internal energy
q = heat
w = work done
As we know that, the term internal energy is the depend on the temperature and the process is isothermal that means at constant temperature.
So, at constant temperature the internal energy is equal to zero.
Thus, w = q = 17537.016 J
Formula used for entropy change:
The entropy change of the gas is, 73.0709 J/K
(c) Now we have to calculate the entropy change of the gas when the expansion is reversible and adiabatic instead of isothermal.
As we know that, in adiabatic process there is no heat exchange between the system and surroundings. That means, q = constant = 0
So, from this we conclude that the entropy change of the gas must also be equal to zero.
Explanation:
What is the energy contained in a 1.30 m3 volume near the Earth's surface due to radiant energy from the Sun
Answers
Answer:
The energy contained is 5.856 x 10⁻⁶ J
Explanation:
Average energy density of electromagnetic radiation per unit volume is given by the equation;
[tex]U_{avg} = \frac{1}{2} \epsilon _o E_o[/tex]²
where;
[tex]\epsilon _o[/tex] is permittivity of free space
[tex]E_o[/tex] is maximum electric field strength, this can be calculated from the intensity of sun reaching the Earth's surface.
[tex]E_o = \sqrt{\frac{2I}{\epsilon_o C} }[/tex]
The intensity of sun reaching the Earth is 1350 W/m²
[tex]E_o = \sqrt{\frac{2*1350}{8.885*10^{-12}*3*10^8 } } \\\\E_o = 1008.96 \ V/m\\[/tex]
Average energy density of electromagnetic radiation per unit volume;
[tex]U_{avg} = \frac{1}{2} \epsilon_o E_o^2\\\\U_{avg} = \frac{1}{2} (8.85*10^{-12})(1008.96)^2\\\\U_{avg} = 4.505 *10^{-6} \ J/m^3[/tex]
The energy contained in a 1.30 m³ volume is given by;
E = (4.505 x 10⁻⁶)(1.3)
E = 5.856 x 10⁻⁶ J
Therefore, the energy contained is 5.856 x 10⁻⁶ J
2. For a rotating rigid body, which of the following statements is NOT correct?
a. All points along a rotating rigid body move with constant linear speed.
b. Points along a rotating body have same angular velocities.
c. Points along a rotating body move through the same angle in equal time intervals.
d. All points have the same angular acceleration.
Answers
Answer:
dasgfwe
Explanation:
What equation relates mechanical energy, thermal energy, and total energy when there is friction present in a system?
Answers
APEX
A spring gun is able to launch a 7.0 gram marble to a vertical height of 22 mmeasured from the compressed point of the marble). If the spring iscompressed 8.0 cm from its relaxed state, what will be the spring constant
Answers
Answer: Spring constant = 472N/m
Explanation:
The change in gravitational potential energy by the spring is given as = mgh
where m= 7.0 g = 7 X 10 -3kg
g= 9.8m/s
h= 22m
Gravitational potential energy= mgh
= 7.0 x 10^-3 X 9.8 x 22 = 1.5092 J
Remember that change in gravitational potential energy by the spring =elastic potential energy
Therefore, Potential energy P. E = 1/2 K x²
where K= CONSTANT
x= 8.0
2 X 1.5092 J / (8.0 X 10^-2)²= 471.625 ROUNDED TO 472 N/m
g (a) Calculate the block's final speed when it reaches the bottom of the frictionless inline. Keep 2 decimal places.
Answers
Answer:
Explanation:
The question is incomplete. Here is the complete question with attachment below.
In the above figure on the LEFT side, a block (mass = 2.8 kg) starts from rest at the top of a frictionless inline and slides to the bottom. The height of the incline is h=6.5 m, angle
A 1400.0 kg car crests a 3200.0 m pass in the mountains and briefly comes to rest. The car descends 1000 m before climbing and cresting a 2800 m pass. (a) Neglecting friction, what should the speed of the car be at the top of the second pass? (b) Find the actual speed of the car if the work due to nonconservative forces is – 5 x106 J.
Answers
Answer:
a) v = 88.54 m/s
b) vf = 26.4 m/s
Explanation:
Given that;
m = 1400.0 kg
a)
by using the energy conservation
loss in potential energy is equal to gain in kinetic energy
mg × ( 3200-2800) = 1/2 ×m×v²
so
1400 × 9.8 × 400 = 0.5 × 1400 × v²
5488000 = 700v²
v² = 5488000 / 700
v² = 7840
v = √7840
v = 88.54 m/s
b)
Work done by all forces is equal to change in KE
W_gravity + W_non - conservative = 1/2×m×(vf² - vi²)
we substitute
1400 × 9.8 × ( 3200-2800) - (5 × 10⁶) = 1/2 × 1400 × (vf² -0 )
488000 = 700 vf²
vf² = 488000 / 700
vf² = 697.1428
vf = √697.1428
vf = 26.4 m/s
3. How are force, work, and power related?
Answers
Answer:
Work is the energy needed to apply a force to move an object a particular distance, where force is parallel to the displacement. Power is the rate at which that work is done.
Answer: Work is the energy needed to apply a force to move an object a particular distance, where force is parallel to the displacement. Power is the rate at which that work is done.
Explanation:
An increase in temperature the kinetic energy and average speed of the gas particles. As a result, the pressure on the walls of the container . Answer Bank What temperature must a gas, initially at 10 ∘C, be brought to for the pressure to triple?
Answers
Answer:
a
The pressure will increase
b
[tex]T_2 = 576^oC[/tex]
Explanation:
From the ideal gas law we have that
[tex]PV = nRT[/tex]
We see that the temperature varies directly with the pressure so if there is an increase in temperature that pressure will increase
The initial temperature is [tex]T_i = 10^oC = 10 + 273 = 283 \ K [/tex]
The objective of this solution is to obtain the temperature of the gas where the pressure is tripled
Now from the above equation given that nR and V are constant we have that
[tex]\frac{P}{T} = constant[/tex]
=> [tex]\frac{P_1}{T_1} =\frac{P_2}{T_2}[/tex]
Let assume the initial pressure is [tex]P_1 = 1 Pa[/tex]
So tripling it will result to the pressure being [tex]P_2 = 3 Pa[/tex]
So
[tex]\frac{1}{283} =\frac{3}{T_2}[/tex]
=> [tex]T_2 = 3 * 283[/tex]
=> [tex]T_2 = 3 * 283[/tex]
=> [tex]T_2 = 849 \ K [/tex]
Converting back to [tex]^oC[/tex]
[tex]T_2 = 849 - 273[/tex]
=> [tex]T_2 = 576^oC[/tex]
A car takes 8 s to increase its velocity from 10 m/s to
30 m/s. What is its average acceration?
Answers
Answer:
Average acceleration is 2.5 m/s^2.
Explanation:
Average acceleration can be found by dividing the change in speed by the change in time.
We know that the initial velocity=10m/s, the final velocity=30m/s and time elapsed is t=8s.
a= (Final velocity-Initial Velocty)/t
a=(30-10)/8=20/8=2.5 m/s^2
Someone help
Match the definition to the term.
1.
the noun that follows the verb and answers the questions
whom or what
linking verb
2. a word that expresses action
sentence
3. who or what the sentence is about
predicate noun
4.
a noun that indicates to or for whom or what something is
done
predicate adjective
5. follows a linking verb and renames the subject
direct object
subject
6. follows a linking verb and describes a subject
verb that joins a subject and a predicate noun or predicate
7.
adjective
indirect object
8. expresses a complete thought
verb
Answers
Answer:
Explanation:
No 1 is linked to the option provided at no 5.
A direct object is the noun that follows the verb and answers the question.
No 2 is linked to the option provided at no 8.
A verb is a word that expresses action.
No 3 is linked to the option provided at no 5.
The subject is what or whom the sentence is about.
No 5 is linked to the option provided at no 3.
A predicate noun follows a linking verb, and renames the subject.
No 6 is linked to the option provided at no 4.
A predicate adjective follows a linking verb, and describes a subject.
No 7 is linked to the option provided at no 1.
A linking verb joins a subject and a predicate.
No 8 is linked to the option provided at no 2.
A sentence expresses a complete thought....
Answer:
predicate noun: follows a linking verb and describes a subject
verb: a word that expresses action
direct object: a noun that indicates to or for whom or what something is done
sentence: expresses a complete thought
predicate adjective: verb that joins a subject and a predicate noun or predicate adjective
subject: who or what the sentence is about
indirect object: follows a linking verb and renames the subject
linking verb: the noun that follows the verb and answers the questions whom or what
Hope this helps!
Correct me if I'm wrong:)
g A child bounces a 50 g super ball on the sidewalk. The velocity change of the super bowl is from 27 m/s downward to 17 m/s upward. If the contact time with the sidewalk is 1 800 s, what is the magnitude of the average force exerted on the superball by the sidewalk
Answers
Answer:
The average force exerted on the superball by the sidewalk is 0.00122 N.
Explanation:
Given;
mass of the super ball, m = 50 g = 0.05 kg
initial velocity of the super bowl, u = -27 m/s (assuming downward motion to be negative)
final velocity of the super bowl, u = 17 m/s (assuming upward motion to be positive)
time of motion, t = 1800 s
The average force exerted on the superball by the sidewalk is given by;
[tex]F = ma\\\\F = \frac{m(v-u)}{t} \\\\F = \frac{0.05(17-(-27))}{1800}\\\\ F = \frac{0.05(44)}{1800}\\\\F = 0.00122 \ N[/tex]
Therefore, the average force exerted on the superball by the sidewalk is 0.00122 N.
What type of research based on approach that used to describe variables rather than to test a predicted relationship between variables?
Answers
Answer:
Correlational research can be used to see if two variables are related and to make predictions based on this relationship.
Isaac walks 4 blocks north. Then he turns around and walks 1 block south.
Which of the following correctly describes Isaac's motion?
A. Isaac walked a distance of 5 blocks, and his displacement was 3
blocks north.
B. Isaac walked a distance of 5 blocks, and his displacement was 5
blocks.
C. Isaac walked a distance of 3 blocks, and his displacement was 3
blocks north.
D. Isaac walked a distance of 3 blocks north, and his displacement
was 5 blocks.
Answers
Answer:
Isaac walked a distance of 5 blocks, and his displacement was 3 blocks north.
Explanation:
Distance is what he covered from the beginning, while displacement was what he covered in a specific direction
Define reflection of sound?
Answers
Explanation:
When sound travels in a given "medium", it would touch the surface of another "medium" and will bounce back in some other direction, this occurrence is called the reflection of sound.
Your TV has a resistance of 10 ohms and a wall voltage of 120 V. How much current and power does it use
Answers
Answer:
Current used is 12 ampere.
Power is 1440 watts.
Explanation:
To find the current used by the TV.
Current (I) = voltage/resistance
Current= 120/10
Current is 12Ampere.
To get power used by the TV,
Power = voltage × current.
= 120× 12
Power = 1440 watts.