A 12 kg barrel is pulled up by a rope. The barrel accelerates at . Find the force exerted by the rope. Show all your work.

If the energy density is the amount of energy per unit mass, then the true statement is A: "NiCd batteries have a higher energy density than lead storage batteries".

One of the advantages of NiCd batteries is that NiCd batteries have a higher energy-to-weight ratio in comparison to lead storage batteries. Even though lead-storage batteries have a higher E°cell, but NiCd batteries have more energy per unit mass and are smaller in size. Therefore, it is sated that NiCd batteries have a higher energy density.

You can learn more about  NiCd batteries at

https://brainly.com/question/12993338

#SPJ4

A tornado lifts a truck 252 m above the ground. As the storm continues, the tornado throws the truck horizontally. It lands 560 m away from where it was picked up. The truck will travel at -78.1 m/s and its time of flight is 17.44 seconds.

Distance of any body or an object is the total path covered by it in a particular time. We can calculate the distance of any object covered by it using the equations of motion in our question. we can also convert equation of motion in our favor to find our answer in a proper format to find our answer by the proper use of equation of motion. By this information we can formerly consider that a tornado lifts a truck 252 m above the ground. As the storm continues, the tornado throws the truck horizontally. It lands 560 m away from where it was picked up. The truck will travel at -78.1 m/s and its time of flight is 17.44 seconds.

Initial velocity = 0 , initial height = 252

[tex]dy = u\times t + \frac{1}{2} at^{2}[/tex]

[tex]dy = u\times t +0.5 gt^{2}[/tex]

[tex]252 =0+ 4.9t^{2}[/tex]

t = 7.17 seconds

horizontal:

v = [tex]\frac{dx}{t} =560\times7.17=[/tex]=78.103 m/s

To the nearest tenth; 78.1 M/s

Learn more about distance:

brainly.com/question/15172156

#SPJ4

Answer:

Explanation:

Gases move from high-pressure areas to low-pressure areas. And the bigger the difference between the pressures, the faster the air will move from the high to the low pressure. That rush of air is the wind we experience.

Answer:

points are needed

Explanation:

Wave amplitude at a specific distance is charged (r). It can be expressed as energy; however Coulomb's law says that it is frequently described as a force.

Charge, also known as electric charge, electrical charge, or electrostatic charge and denoted by the symbol q, is a property of a unit of matter that indicates how many more or fewer electrons than protons it contains.

Protons and electrons are the most prevalent charge carriers for the positive and negative forms of electric charges, respectively. Subatomic particles or matter particles are examples of the different forms of charges: Positive charge characterizes protons. Negative charge characterizes electrons.

Tcosθ=mg \sTsinθ=Fe\stanθ=

mg \sFe

​∵ Fe= \sr \s2

Kq \s2

Fe= \s(2d) \s2

Kq \s2

Fe=4.l2 sin2 Kq2

"tan" equals "4l 2 sin 2 mg Kq 2"

equals (4l 2 sin 2 mg)4 0

​q \s2​

Q 2 equals (4mgl 2 sin 2 tan).

4πϵ \s0

Learn more about charge here-

https://brainly.com/question/30163160

#SPJ4

​

​

Answer:

The potential energy (P.E.) stored in an elastic spring is equal to the work done in compressing or stretching the spring.

When a spring is compressed or stretched, the force required to do so is given by Hooke's law, which states that the force F required to compress or stretch a spring by an amount x is given by

F = kx, where k is the spring constant.

The work done in compressing or stretching a spring is equal to the force required to do so multiplied by the distance over which the force is applied.

In the case of a spring, this distance is equal to the amount x by which the spring is compressed or stretched.

Therefore, the work done in compressing or stretching a spring is given by

W = Fd = kx * x = kx^2.

The potential energy stored in the spring is equal to the work done to compress or stretch it.

Therefore, the potential energy of a spring that is compressed by an amount x is given by P.E. = W = kx^2.

Substituting kx^2 = 1/2 kx^2, we find that

P.E. = 1/2 kx^2.

This shows that the potential energy stored in an elastic spring is equal to 1/2 times the spring constant multiplied by the amount x by which the spring is compressed or stretched.

Explanation:

Since every action has an equal and opposite response according to Newton's third law of motion, the impulses that colliding objects exert on one another are equal and opposite.

This implies that whenever one item exerts force on another, the other object responds by exerting a force that is equal to and opposite to that exerted by the first object. A collision is a brief interaction between two bodies or more than two bodies at once that results in a change in the motion of the bodies involved due to the internal forces at play. force is involved in collisions (there is a change in velocity ). When two bodies collide, their combined kinetic energy stays constant, which is known as an elastic collision.

Learn more about kinetic energy  here

https://brainly.com/question/26472013

#SPJ4

The total horizontal force on the driver if the translational velocity around the same curve is 18 m/s is 215 N.

The word 'force' has a precise meaning. At this level, it is completely appropriate to describe a force as a push or a pull. A force is not something that an object contains or 'has in it'.

In  ∑F=m rv 2,

both m and r are unknown but remain constant.

Symbolically,

write ∑F slow​ =( r m​ )(14.0m/s) 2  

and ∑F fast​ =( r m​ )(18.0m/s) 2

Therefore, ∑F is proportional to v 2  and increases by a factor of ( 14.018.0​ ) 2  

as v increases from 14.0m/s to 18.0m/s.

The total force at the higher speed is then

∑F fast​ =( 14.018.0​ )

2 ∑F slow​ =( 14.018.0​ ) 2 (130N)

=215N

To know more about force visit:

brainly.com/question/13191643

#SPJ4

The force of gravity between two objects is equal to their respective masses multiplied by two. If one of the items triples in mass, the gravitational pull between them will also triple.

The force of gravity between two objects is multiplied by two when their masses are each doubled, and so on. Since an object's kinetic energy is exactly proportional to its mass, it will double along with the object's mass. The force of gravity between two objects is equal to their respective masses multiplied by two. If one of the items triples in mass, the gravitational pull between them will also triple.

Learn more about gravitational here-

https://brainly.com/question/3009841

#SPJ4

The benefits of dynamic exercises before playing volleyball and how they will prepare your body for the match are:

Learn more about dynamic stretching:

https://brainly.com/question/24842019

#SPJ4

The 6,100 N is the centripetal force on the hammer when it has a tangential speed of 31.95 m/s.

Any force that induces a shift in velocity direction toward the center of a circular motion is referred to as a centripetal force. Centripetal force is caused by the part of the force that is perpendicular to the velocity.

Centripetal force is a force that operates on a body traveling in a circle and is pointed in the direction of the body's center of mass. It is computed using the formula:

F = mv^2/r

where m is the mass, v is the velocity and r is the radius.

F = 7.26(31.95)^2 / (1.215) = 6100 N

To know more about centripetal force visit;

https://brainly.com/question/11324711

#SPJ4

Answer:

2 inches

Explanation:

Volume of a sphere = 4/3  pi r^3

   for the EIGHT balls   total volume =   8  *  4/3 pi (1^3) = 32/3 pi

This is the volume of the made-up ONE ball

    4/3 pi r^3  = 32/3 pi

       4/3 r^3 = 32/3

            r^3 = 32/3  * 3/4

             r^3 = 8

              r = 2 inches

The velocity of the hammer of mass 1.9 kg is 11.07 m/s.

Velocity is the rate of change of displacement.

To calculate the velocity of the hammer, we use the formula below.

Formula:

Where:

Substitute these values into equation 1

Learn more about velocity here: https://brainly.com/question/24445340

#SPJ1

The words with a blank are , magnet, coiled copper, motor, mechanical and electrical. Electric generators produce electricity by combining a moving shaft with coiled wire.

The magnetic field is the region where the strength of magnetism acts on a magnetic substance or a flowing electric charge. a magnetic field diagram that shows how the magnetic force is distributed both inside and outside of a magnetic substance.

When an object is moving, it has kinetic energy. If we intend to accelerate an object, we must exert a force. The task has been finished, energy has been applied to the object, and it is now moving at a fixed constant pace.

Therefore, electric generators generate electricity by combining coiled wire and moving shaft magnetic fields. Kinetic energy, or the energy of motion, is effectively transformed into electrical energy via electric generators.

To know more about magnetic field visit:

https://brainly.com/question/7802337

#SPJ4

Long ramp would be the net static friction acting on her if the ramp has a total weight of 40 kg is  F = 6.77 N.

The effects (the sum) of any and all pulling and pushing forces that are actually acting on an object is known as the net force. An item will speed up in the net force if the pushing and pulling forces acting on it are not equal (a net force acts).

E(f) - E(i) = -F(k)d

E(f) = mgy(f) = 1/2×mv²(f)

E(i) = mgy(i) + 1/2×mv²(i)

F(k) = [E(f)- E(i)]/-d

= {mgy(s) + 1/2mv²(f) - (mgy(i) + 1/2mv²(i))}/-d

F(k) = {(40)(9.8)(14.2)(sin[tex]20^{o}[/tex]) +0-(0+1/2(40)([tex]10^{2}[/tex])}/-14.2

F(k) = 6.77 N

To know more about static friction visit :

brainly.com/question/13000653

#SPJ4

Answer:

B

Explanation:

it has the best view for seeing the shape of the arm in a spiral galaxy

The type of view would best allow scientist to see the shape of the arm in a spiral galaxy is Side diagnol.

Spiral galaxies are twisted collections of stars and gas that often have beautiful shapes and are made up of hot young stars.

Most of the galaxies that scientists have discovered so far are spiral galaxies, as opposed to the other two main categories of galaxy shapes — elliptical and irregular. The Milky Way – the galaxy that includes Earth and our solar system – is an example of a spiral galaxy.

The majority of spiral galaxies have a flat, spinning disk of stars around a central bulge. Older, fainter stars make up the bulge in the center, which is thought to house a supermassive black hole.

Therefore, The type of view would best allow scientist to see the shape of the arm in a spiral galaxy is Side diagnol.

To learn more about Spiral galaxy, refer to the link:

https://brainly.com/question/13074009

#SPJ2

A = (v-u)/t, where an is acceleration, v is final speed, u is initial speed, and t is time, is the equation for acceleration. When the values are filled in, we obtain a = (60-20)/5 or an is 8 m/s2.

The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). This enables you to calculate the change in velocity in meters per second squared (m/s2).

+2 m/s2

If there is no change in velocity between 2 and 3 seconds, the acceleration is 0 m/s2. The acceleration is +2 m/s2 over the first 0 to the second interval. The acceleration is zero between seconds two and three. The acceleration is -3 m/s2 throughout the three to six-second period.

to know more about accelerates here:

brainly.com/question/12550364

#SPJ4

When we wear the backpack, the center of gravity will go to the back and up direction.

A location established in relation to an object or set of objects is the center of mass. It represents the system's average location as weighted by each component's mass. The center of gravity for straightforward stiff objects with homogeneous density is found at the centroid.

Because the center of mass of any body is situated where the majority of the body mass is concentrated, when we wear a backpack, the center of mass shifts toward the up and back.

To know more about Center of mass, visit,

https://brainly.com/question/28134510

#SPJ4

A diver can regulate his rate of rotation and reach the water in a vertical position because his angular momentum stays constant while he is in the air. This information makes it easier for us to comprehend how this is possible.

As a result, Option D is accurate.

The rotating counterpart of linear momentum in physics is called angular momentum. Given that the total angular momentum is conserved, or remains constant in a closed system, it is an important physical quantity. By dividing the rotational inertia of an item by the angular velocity, one may get its angular momentum. The angular velocity of an item is used to calculate its rotational speed. An object's rotational inertia is what makes turning it challenging. On an ice rink or in an office, someone spinning

To know more about Angular momentum here

https://brainly.com/question/29524750

#SPJ4

Celsius (C) scale to its Fahrenheit (F) relation is [tex]F = \frac{9}{5} C + 32[/tex].

The degree Celsius is a temperature unit on the Celsius scale, which is one of two temperature scales employed by the International System of Units (SI) alongside the Kelvin scale. The degree Celsius (symbol: °C) can refer to a certain temperature on the Celsius scale or a unit used to represent the difference or range between two temperatures. It is named after Anders Celsius (1701-1744), a Swedish astronomer who invented a comparable temperature scale in 1742. The measurement was previously known as centigrade, from the Latin centum, which means 100, and gradus, which represents steps, until being changed in 1948 to honour Anders Celsius.

The Fahrenheit scale is a temperature scale that was proposed by scientist Daniel Gabriel Fahrenheit in 1724. The degree Fahrenheit is the unit of measurement. Fahrenheit temperature scale, based on the freezing point of water at 32° and the boiling point of water at 212°, with the distance between the two split into 180 equal parts.

To learn more about Celsius and Fahrenheit scales, here

https://brainly.com/question/15710274

#SPJ4

Acceleration increase down a ramp, due to an object is free to move under the influence of gravity. That's why acceleration increases.

Acceleration is a measure of how quickly an object's velocity changes. On a ramp, an object is free to move under the influence of gravity. The gravitational force acting on an object is always directed downward, and the force of friction acting on an object is directed upward. The force acting on an object moving down a ramp is the force of gravity minus the force of friction. Since the force of gravity is greater than the force of friction, the net force acting on the object is directed downward, which causes the object to accelerate downward. The angle of the ramp affects the force of friction, as the greater the angle of the ramp, the greater the force of friction, and the less the net force acting on the object and less acceleration. Therefore, acceleration increases down a ramp because the net force acting on an object is directed downward and the angle of the ramp affects the force of friction.

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

Alberta will meet the paper ball 8m away from Fatima's position after 13.3 seconds.

What is the seconds?

Seconds is a unit of time and is the base unit of time in the International System of Units (SI). It is described as the length of 9,192,631,770 radiation periods that correspond to the change between the two hyperfine levels of the cesium-133 atom's ground state. One second is equal to 1/60 of a minute, 1/3,600 of an hour, 1/86,400 of a day, and 1/31,536,000 of a year.

Seconds are a unit of time that is equal to one sixty-fourth of a minute. It is the base unit of measurement for time in the International System of Units (SI). One second is equal to 1000 milliseconds or 0.000277778 minutes. Seconds can be used to measure very short periods of time, such as the time it takes for light to travel from one end of a football field to the other.

To learn more about seconds visit:

brainly.com/question/26524032

#SPJ1

The time taken can be calculated by the equation: t = -RC ln(15/50)

To determine how long after closing the switch s the potential across each capacitor will be reduced to 15.0 V, we need to know the initial potential across the capacitors, the capacitance value and the resistance in the circuit.

When a switch is closed, the potential across a capacitor decreases exponentially with time according to the equation:

V(t) = V0e^(-t/RC)

Where V0 is the initial potential across the capacitor, t is time, R is the resistance in the circuit, and C is the capacitance.

In this case, the initial potential across each capacitor is 50.0 V, and the resistance in the circuit is 80 ohms.

To find the capacitance value we need to know that the capacitors are parallely connected, which means that the total capacitance is the sum of the individual capacitances:

Ctotal = C1 + C2

Once we have the capacitance value, we can find the time constant RC:

RC = R / Ctotal

Now we can use the equation above to find the time it takes for the potential to decay to a certain percentage of the initial value.

For example, if we want to find the time it takes for the potential to decay to 15.0 V (30% of the initial value), we can use the following equation:

15.0 V = 50.0 Ve^(-t/RC)

and we can solve for t:

t = -RC ln(15/50)

It's worth noting that this is an estimation and that in real world situations the resistance and capacitance values are also affected by other factors such as leakage current or parasitic capacitances.

Read more about Capacitance:

https://brainly.com/question/14746225

#SPJ4

Kinetic friction force, or f k = k F N = 3.1N, is the amount of frictional force acting on the block.

Static friction is the friction that exists between two systems when they are in contact and immobile with respect to one another. Kinetic friction is the term for the resistance that exists between two systems while they are in contact and moving in relation to one another.

Either static or kinetic friction We decide on +x right and +y up. Applying Newton's second law to these axes:

F−f=ma

 P+F n −mg=0

where F=6.0 N and m=2.5 kg is the mass of the block.

          F N =(2.5kg)(9.8m/s 2 )–10N=14.5N.

This implies ,fs, max =μ s F N=6.6N, which is larger than the 6.0N rightward force. The block, which was previously at rest, stays in place as a result.

Putting a = 0

f=P=6.0 N is the static friction force that results from plugging the first of our equations above.

This suggests that, fs, max = s F N =5.8N, which is smaller than the 6.0 N rightward

force, which causes the block to move. Therefore, we are working with kinetic data instead of static data.

Eq. reveals that friction is f k = k F N =3.6 N.

which (as expected) is less than the 6.0 N rightward force. Thus, the block moves. The kinetic friction force, then, is f k =μ k F N =3.1N.

To know more about Kinetic friction visit:-

https://brainly.com/question/17237604

#SPJ4

W=mg=(3)(9.8)=29.4N is the balance measurement for an airborne body. Scales of this kind include spring balances and newtons meters. They are frequently used to gauge the amount of force applied to an object.

The spring balance operates according to Hooke's law. According to Hooke's law, a material's strain will increase in direct proportion to its applied stress up to its elastic limit.

A straightforward and affordable way of measuring mass is offered by spring balances. The mass is suspended from a spring, and the spring's bending caused by the mass's downward gravitational pull is gauged against a scale.

To know more about spring balances visit :-

https://brainly.com/question/1597448

#SPJ4

The end product when equilibrium is reached is a mixture of water and ice at a temperature of 0°C.

Since the temperature of the water is higher than the temperature of the ice, the ice starts to melt and the temperature of the mixture decreases until it reaches the freezing point of 0°C.

The amount of water in the mixture increases due to the melting of the ice while the amount of ice decreases until all of the ice has melted and there is 1.4 kg of water in the mixture.

The heat energy that was released when the ice melted is absorbed by the water, raising its temperature to 0°C and causing it to reach equilibrium.

Learn more about equilibrium:

https://brainly.com/question/19340344

#SPJ4

Block B on the exterior f-F = ma c f-F = mv2 2d f-F = D = mv2 d f-F E f-F = v2 2d.

A thing's top, exterior, or outermost layer: Tropical rain forests once covered 10% of the earth's surface. The marble has a smooth, polished surface.

The surface of the picture is covered in little fissures. The bowl's exterior has a glossy finish. The wood was rough on the outside. Ice-covered roads ought to be avoided. The phrase "on the surface" describes how something seems, even if it isn't really the case.

The formulas F- f = mv2 / d can be used to determine the force of friction that the surface exerts on the block.

F - f = ma

a = v/t

t = d/v

F - f = m × v / t

F- f = m ×

F- f = m × v²/d

Therefore,

F- f = mv² / d

To learn more about mass surface refer to:

brainly.com/question/19385703

#SPJ4

The characteristics which I would suggest are the planet should be dense, solid and located near star.

All the eight planets of the solar system move around the sun in fixed paths. These paths are elongated. They are called orbits. Mercury is nearest to the sun. It takes only about 88 days to complete one round along its orbit.

Venus is considered as ‘Earth’s-twin’ because its size and shape are very much similar to that of the earth.

Till recently (August 2006), Pluto was also considered a planet. However, in a meeting of the International Astronomical Union, a decision was taken that Pluto like other celestial objects (Ceres, 2003 UB313) discovered in recent past may be called ‘dwarf planets.

To know more about planets here

https://brainly.com/question/734965

#SPJ4

The acceleration of a dolly-sandbag system when mass and coefficient of kinetic friction is given is calculated to be 0.29 m/s².

Given that,

The mass of the dolly and actor combined M = 76 kg

The mass of the sandbag m = 18 kg

The coefficient of kinetic friction between the dolly and the stage floor = 0.20.

Let the acceleration is a.

From Newton's 2nd law of motion, we can write that,

ΣF = (m+M) a

mg - μMg = (m+M) a

a = g (m- μM)/ (m+M)

a = 9.8 ( 18 - 0.20×76)/(18+76)

a = 0.29 m/s².

Thus, the acceleration of the dolly-sandbag system is 0.29 m/s².

To know more about acceleration:

https://brainly.com/question/29034189

#SPJ4

First, we need to calculate force of the rocket.

What is Velocity?

Velocity is a vector quantity that describes the rate and direction of a body's motion. It is represented by an arrow pointing in the direction of motion and having a length equal to the rate of motion. Velocity is a fundamental concept in classical mechanics and is defined as the rate of change of position with respect to time.

Calculate the force of the rocket:

F = ma = (15,000 kg)(230 m/s) = 3,450,000 kg m/s2

Calculate the force of the exhaust gases:

F = ma = (1,000 kg)(-1,200 m/s) = -1,200,000 kg m/s2

Calculate the net force on the rocket:

Net Force = F_rocket + F_exhaust = 3,450,000 kg m/s2 + (-1,200,000 kg m/s2) = 2,250,000 kg m/s2

Calculate the acceleration of the rocket:

a = F/m = (2,250,000 kg m/s2)/(15,000 kg) = 150 m/s2

Calculate the change in velocity of the rocket:

Δv = a × t = (150 m/s2)(6.0 s) = 900 m/s.

To know more about Velocity,

https://brainly.com/question/1482529

#SPJ4

A visual representation of speed. It can also be used to denote speed. Without taking into account orientation, this is the rate of distance covered in a given amount of time.

The speed and direction of a particle's motion are both considered to be the particle's velocity. The distance travelled as well as the direction it is veering.

While velocity refers to both the speed and direction of an object's motion, speed is only the rate at which an object moves along a path over time. In other words, velocity is a vector, but on the other hand speed is a scalar value.

We know that velocity is a vector quantity since it has both a magnitude and a direction. However, speed just has a magnitude and no direction, therefore it.

To learn more about speed visit:

brainly.com/question/7359669

#SPJ4