Answer:
[tex]F=78.3hz[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=12[/tex]
Length [tex]l=80cm=0.8m[/tex]
Linear density [tex]\mu= 6.0g[/tex]
Generally the equation for Frequency is mathematically given by
[tex]F=\frac{1}{2l}\sqrt{\frac{T}{K}}[/tex]
[tex]F=\frac{1}{2(0.8)}\sqrt{\frac{12*9.8*0.8}{6*10^{-3}}}[/tex]
[tex]F=78.3hz[/tex]
Our solar system is made up of the Sun, 8 planets, and other bodies such as
asteroids orbiting the Sun. The solar system is very large compared to anything we see on
Earth. The distance between planets is measured in astronomical units (AU). One AU is
equal to 149.6 million kilometers, the average distance between the Sun and Earth. Scale
models are useful for helping us understand the size of the solar system.
Mr. Wilson’s science class made a scale model of the solar system. They went out to the
school’s football field, and they used the chart shown below to mark out the scale distance
from the Sun to each planet
The average orbital radius for a planet is its distance from the Sun. Which statement BEST
describes the relationship between the planets and their average orbital radii?
A. The planets are evenly spaced in the solar system.
B. Closer to the Sun, the planets are regularly spaced apart.
C. The planets closest to each other are the ones farthest from the sun.
D. Farther from the Sun, the planets are spaced farther apart from each other.
the answer to the question is D
The v-t graph of a moving body is given below. The distance covered by the body in
the first 40s is _________and its acceleration during the last 40s is _____________.
a) 3200m; 2ms-1
b) 700m; -2ms-2
c) 900m; - 2ms-2
d) 900m; 2ms-2
Answer: The correct answer is a) 3200 m, [tex]-2m/s^2[/tex]
Explanation:
Speed is defined as the ratio of distance travelled to the time taken. The equation follows:
[tex]\text{Speed}=\frac{\text{Distance travalled}}{\text{Time taken}}[/tex]
From the graph:
Speed for the first 40 s, v = 80 m/s
Time taken, t = 40 s
Putting values in above equation, we get:
[tex]\text{Distance travalled}=(80 m/s\times 40s)=3200 m[/tex]
Acceleration is defined as the ratio of change of velocity to the change of time. The equation follows:
[tex]\text{Acceleration}=\frac{\Delta v}{\Delta t}=\frac{v_2-v_1}{t_2-t_1}[/tex]
From the graph, for the last 40 sec:
Initial velocity, [tex]v_1[/tex] = 80 m/s
Final velocity, [tex]v_2[/tex] = 0 m/s
Initial time, [tex]t_1[/tex] = 40 s
Final time, [tex]t_2[/tex] = 80 s
Putting values in above equation, we get:
[tex]\text{Acceleration}=\frac{(0-80)m/s}{(80-40)s}\\\\\text{Acceleration}=\frac{-80m/s}{40s}=-2m/s^2[/tex]
Hence, the correct answer is a) 3200 m, [tex]-2m/s^2[/tex]
resolve the vector shown below into its components
Answer:
ans: option A
Explanation:
components along x- axis is -3x and along x- axes is -2y
now use triangle law of vector addition
Suppose 4 J of work are needed to stretch a spring 14 cm from its natural position. How much work is needed to stretch it 20 cm from its natural position
Answer:
8.16 J
Explanation:
Applying,
W = ke²/2................. Equation 1
Where W = work done in stretching the spring, k = spring constant, e = extension
make k the subject of the equation
k = 2W/e²................ Equation 2
From the question,
Given: W = 4 J, e = 14 cm = 0.14 m
Substitute these values into equation 2
k = 2(4)/0.14²
k = 8/0.0196
k = 408.16 N/m
If stretchd 20 cm from its natural length,
Therefore,
e = 20 cm = 0.2 m
W = 408.16(0.2²)/2
W = 8.16 J
A cheetah is running in a straight line in pursuit of prey. The cheetah's mass is 63.9 kg. Through its running motion, assume the cheetah experiences a constant forward force of 609.1 N. Also, assume the cheetah experiences a constant 107.9 N air resistance force that is opposite its motion. What is the magnitude of the cheetah's acceleration, in units of m/s2?
Answer:
a = 7.84 m / s²
Explanation:
For this exercise let's use Newton's second law
F - fr = m a
indicate that the force is F = 609.1 N and the friction force is fr = 107.9 N and is constant
a = [tex]\frac{F - fr}{m}[/tex]
let's calculate
a = [tex]\frac{ 609.1 - 107.9 }{63.9}[/tex]
a = 7.84 m / s²
A magnetic field of 0.276 T exists in the region enclosed by a solenoid that has 517 turns and a diameter of 10.5 cm. Within what period of time must the field be reduced to zero if the average magnitude of the induced emf within the coil during this time interval is to be 12.6 kV
Answer:
The period the field must be reduced to zero is 9.81 x 10⁻⁵ s
Explanation:
Given;
initial value of the magnetic field, B₁ = 0.276 T
number of turns of the solenoid, N = 517 turns
diameter of the solenoid, d = 10.5 cm = 0.105 m
induced emf, = 12.6 kV = 12,600 V
when the field becomes zero, then the final magnetic field value, B₂ = 0
The induced emf is given by Faraday's law;
[tex]emf = -\frac{NA\Delta B}{t} \\\\emf = -\frac{NA (B_2 -B_1)}{t} \\\\t = -\frac{NA (B_2 -B_1)}{emf}\\\\t = \frac{NA (B_1 -B_2)}{emf}\\\\where;\\\\t \ is \ the \ time \ when \ B = 0 \ \ (i.e\ B_2 = 0)\\\\A \ is \ the \ area \ of \ the \ coil\\\\A = \frac{\pi d^2}{4} = \frac{\pi (0.105)^2}{4} = 0.00866 \ m^2\\\\t= \frac{(517) \times (0.00866)\times (0.276 -0)}{12,600}\\\\t = 9.81 \times 10^{-5} \ s[/tex]
Therefore, the period the field must be reduced to zero is 9.81 x 10⁻⁵ s
A ball player catches a ball 3.55 s s after throwing it vertically upward. with what speed did he throw it
Answer:
i believe he threw the ball up at about 18 mph
Explanation:
A hockey puck is sliding across the ice with an initial velocity of 25 m/s. If the coefficient of friction between the hockey puck and the ice is 0.08, how much time (in seconds) will it take before the hockey puck slides to a stop
Answer: 31.89seconds
Explanation:
Based on the information given, we are meant to calculate deceleration which will be:
t = V/a
where, a = mg
Therefore, t = V/mg
t = 25/0.08 × 9.8
t = 25/0.784
t = 31.89seconds
Therefore, the time that it will take before the hockey puck slides to a stop is 31.89seconds.
factors that favour mining in South Africa
Answer:
According to the data, factors influencing mining investment in South Africa's favour are the availability of labour and skills, the quality of the country's infrastructure, the quality of its geological database, and the State's environmental regulations.
A rod of 3.0-m length and a square (2.0 mm X 2.0 mm) cross section is made of a material with a resistivitYof 6.0 X 10-8 Ω m. If a potential difference of 0.60 V is placed across the ends of the rod, at what rate is heat generated in the rod in watt.
Select one:
a. 24
b. 12
c. 4
d. 8
If the open body is postively charged and another body is negatively charged ,free electrons tend to
Answer:
The free electrons tend to Negatively Charged body to Positively Charged body
Explanation:
As they have different charges, Electrons are more attracted to the Positive or it's opposite charge.
How would an observer on train A, which is moving at nearly the speed of light, view a clock on train B, which is moving at the same speed and in the same direction?
A. The clock on train B would appear narrower and run more slowly.
B. The clock on train B would appear to be the same width and to run at the same rate. C. The clock on train B would appear narrower and run faster.
D. The clock on train B would appear wider and run more slowly.
Answer:
B.
Explanation:
If both train A and train B are moving in the same direction and the exact same speed then from an observer's viewpoint within either train everything would seem as though it is not moving. Therefore, the clock on train B would appear to be the same width and to run at the same rate. In order for this to be the case the speed of both trains would need to be exactly the same, any difference in speed will cause the clock on the opposite train to appear distorted and run either faster or slower depending on the speed of the train you are on.
Answer:
The trains are moving at the same speed, so the answer is A.
You throw a stone straight down from the top of a tall tower. It leaves your hand moving at 8.00 m/s, Air resistance can be neglected. Take the positive -direction to be upward, and choose y 0 to be the point where the stone leaves your hand. Find the stone's position 1.50s after it leaves your hand.
Express your answer with the appropriate units.
Find the y-component of the stone's velocity 1.50 s after it leaves your hand. Express your answer with t0he appropriate units.
Answer:
The velocity after 1.5 s is 22.7 m/s downwards.
Explanation:
Initial velocity = - 8 m/s
acceleration, a = - 9.8 m/s2
time, t = 1.5 s
Use first equation of motion
v = u + at
v = - 8 - 9.8 x 1.5
v = - 8 - 14.7
v = - 22.7 m/s
Thus, the velocity after 1.5 s is 22.7 m/s downwards.
what is simple definition of democracy
it's a form of government where people elect their representatives
Answer:
The word democracy itself means rule by the people.
g Is a nucleus that absorbs at 4.13 δ more shielded or less shielded than a nucleus that absorbs at 11.45 δ? _________ Does the nucleus that absorbs at 4.13 δ require a stronger applied field or a weaker applied field to come into resonance than the nucleus that absorbs at 11.45 δ?
Answer: A nucleus that absorbs at [tex]11.45\delta[/tex] is less shielded and a nucleus that absorbs at [tex]4.13\delta[/tex] will require a stronger applied field
Explanation:
While interpreting the data in NMR, the positions of signals are studied.
The nucleus/ protons having a higher value of [tex]\delta[/tex] are said to be less shielded. They are said to be upfield.
The nucleus/protons having a lower value of [tex]\delta[/tex] are said to be more shielded. They are said to be downfield.
So, a nucleus that absorbs at [tex]11.45\delta[/tex] is less shielded by the nucleus that absorbs at [tex]4.13\delta[/tex]
Also, the less shielded nucleus/protons will require a weak applied field to come into resonance than the more shielded nucleus/protons
So, a nucleus that absorbs at [tex]4.13\delta[/tex] will require a stronger applied field to come into resonance than the nucleus that absorbs at [tex]11.45\delta[/tex]
The decibel level of a jackhammer is 125 dB relative to the threshold of hearing. Determine the decibel level if three jackhammers operate side by side.
Answer:
130 dB
Explanation:
The equation for decibel level is given by:
[tex]D=10log(\frac{I}{I_n} )\\\\Where\ D\ is\ the \ decibel\ level\ in\ dB, I\ is\ the\ intensity\ in \ W/m^2, \\I_n\ is\ threshold\ intensity\ to\ the\ human\ ear=1*10^{-12}W/m^2\\\\Given\ that\ D=125dB, hence:\\\\125=10log(\frac{I}{1*10^{-12}} )\\\\12.5=log(\frac{I}{1*10^{-12}} )\\\\I=3.2\ W/m^2[/tex]
The intensity for 1 jack hammer is 3.2 W/m², therefore for 3 jack hammers, the intensity = 3 * 3.2 = 9.6 W/m²
[tex]D=10\ log(\frac{I}{I_n} )\\\\D=10*log(\frac{9.6}{1*10^{-12}} )\\\\D=130\ dB[/tex]
A Michelson interferometer operating at a 400 nm wavelength has a 3.70-cm-long glass cell in one arm. To begin, the air is pumped out of the cell and mirror M2 is adjusted to produce a bright spot at the center of the interference pattern. Then a valve is opened and air is slowly admitted into the cell. The index of refraction of air at 1.00 atm pressure is 1.00028.
How many bright-dark-bright fringe shifts are observed as the cell fills with air?
Answer:
[tex]m=42\ fringes[/tex]
Explanation:
From the question we are told that:
Wavelength [tex]\lambda=400nm[/tex]
Length of cell arm [tex]h=3.70cm[/tex]
Refraction of air at at 1.00 atm pressure [tex]n=1.00028.[/tex]
Generally the equation for Number of shifts is mathematically given by
[tex]m=N-N_o[/tex]
Since
[tex]N_0=\frac{2t}{\lambda_0}[/tex]
Therefore
[tex]m=\frac{2t}{\lambda_0/n}-\frac{2t}{\lambda_0}[/tex]
[tex]m=\frac{2t}{\lambda_0} n-1[/tex]
[tex]m=\frac{2(3.7*10^{-2})}{400*10^{-9}}*(1.00028-1)[/tex]
[tex]m=51.8[/tex]
[tex]m=42\ fringes[/tex]
In higher mass stars, repeating cycles of fusion will create heavier elements in layers
until which element is created at the center of the core?
hydrogen
iron
uranium
helium
what is the main function of a step-up and step-down transformers
Answer:
Explanation:
The difference between step-up and step-down transformer is given below:-
Step-up transformer
i) It increases the voltage.
ii) It decreases the current strength.
iii) It has a greater number of turns in secondary as compared to the primary.
iv) The wire of primary is thicker than that of the secondary coil.
Step-down transformer
i) It decreases the voltage.
ii) It increases the current strength of the secondary.
iii) It has less number of turns in secondary as compared to the primary.
iv) The wire of the secondary coil is thicker than that of the primary coil.
Can somebody please help
Answer:
Explanation:
part A: C
part B: B
The triceps muscle in the back of the upper arm extends the forearm. This muscle in a professional boxer exerts a force of 2.00\times 10^32.00×10 ^3 N with an effective perpendicular lever arm of 3.00 cm, producing an angular acceleration of the forearm of 120 rad/s^2 .
What is the moment of inertia of the boxer's forearm?
Answer:
Explanation:
From the given information:
The torque produced due to the force can be expressed as:
[tex]\tau = F \times r[/tex]
where;
[tex]\tau[/tex] = torque
F = force exerted
r = lever's arm radius
[tex]\tau[/tex] = [tex]2.00 \times 10^3 \times 0.03 m[/tex]
[tex]\tau[/tex] = 60 N.m
However, equating the torque with the moment of inertia & angular acceleration, we use the equation:
[tex]\tau[/tex] = I∝
60 Nm = I × 120 rad/s²
I = 60 Nm/120 rad/s²
I = 0.5 kg.m²
A house has well-insulated walls. It contains a volume of 105 m3 of air at 305 K.
Consider heating it at constant pressure. Calculate the energy required to increase the temperature of this diatomic ideal gas by 0.7
Answer: [tex]85.46\ kJ[/tex]
Explanation:
Given
Volume of air [tex]V=105\ m^3[/tex]
Temperature of air [tex]T=305\ K[/tex]
Increase in temperature [tex]\Delta T=0.7^{\circ}C[/tex]
Specific heat for diatomic gas is [tex]C_p=\dfrac{7R}{2}[/tex]
Energy required to increase the temperature is
[tex]\Rightarrow Q=nC_pdT\\\\\Rightarrow Q=n\times \dfrac{7R}{2}\times \Delta T\\\\\Rightarrow Q=\dfrac{7}{2}nR\Delta T\\\\\Rightarrow Q=\dfrac{7}{2}\times \dfrac{PV}{T}\times \Delta T\quad [\text{using PV=nRT}][/tex]
Insert the values
[tex]\Rightarrow Q=\dfrac{7}{2}\times \dfrac{1.01325\times 10^5\times 105}{305}\times 0.7\\ \text{Assuming air pressure to be atmospheric P=}1.01325\times 10^5\ N/m^2\\\\\Rightarrow Q=0.8546\times 10^5\\\Rightarrow Q=85.46\ kJ[/tex]
A balloon pops, making a loud noise that startles you. What kind of energy best describes this experience?
A. Thermal Energy
B. Sound Energy
C. Gravitational Energy
D. Radiant Energy
44.7
When Xavier places his hands near a light bulb, he notices that certain areas around the light bulb are warmer than
others. Which best explains this?
The areas to the sides of the light bulb are warmest because of conduction,
O The areas to the sides of the light bulb are warmest because of convection,
The area directly above the light bulb is warmest because of conduction,
The area directly above the light bulb is warmest because of convection.
Save and Exit
Submit
Mark this and retum
Nex
Answer:
The area directly above the light bulb is warmest because of convection.
Explanation:
if all the sides of the bulb are equally close to the light source inside the bulb, all area of the bulb would be equally heated by conduction. however, convection heating mainly heats up the surface above the light source. in convection heating, the air above the surface of the light source get heated by the light source and expands, casuing it to be less dense and rise to the top of the bulb. colder denser air at the top of the bulb sink to the light source adn gain heat and expands, becoming less dense. this process repeats and the surface above the light source becomes the warmest due to convection heating
An alpha particle consists of two protons and two neutrons. How will the emission of an alpha particle affect the following:
a. The atomic number of the atom: _______Atomic Number will go down_______
b. The mass number of the atom: ___Mass number will go down____________
Answer:
a) The atomic number decreases by 2 units
b) the atomic mass decreases by 4 units
Explanation:
An alpha particle is a helium nucleus, which is why it is made up of two positive protons and two negative neutrons, the mass of the particles is almost the same.
a) The atomic number decreases by 2 units
b) the atomic mass decreases by 4 units
Which of the following statements regarding the warming of the troposphere (i.e., the lower atmosphere) are TRUE (choose all that apply):
a. Conduction only warms the shallow layer of air within a few centimeters of the ground
b. The troposphere is heated mainly from above
c. Atmospheric gases do not readily absorb solar radiation
d. The troposphere is heated mainly by direct molecule-to-molecule contact
e. Condensation of water vapor plays a role in heating the lower atmosphere
f. Oxygen and nitrogen readily absorb and emit terrestrial radiation
g. Convection distributes heat vertically
Answer: • Conduction only warms the shallow layer of air within a few centimeters of the ground
• Atmospheric gases do not readily absorb solar radiation
• Condensation of water vapor plays a role in heating the lower atmosphere.
• Convection distributes heat vertically
Explanation:
The statements regarding the warming of the troposphere that are true include:
• Conduction only warms the shallow layer of air within a few centimeters of the ground
• Atmospheric gases do not readily absorb solar radiation
• Condensation of water vapor plays a role in heating the lower atmosphere.
• Convection distributes heat vertically.
Therefore, the correct options are A, C, E and G.
• Conduction only warms the shallow layer of air within a few centimeters of the ground
• Atmospheric gases do not readily absorb solar radiation
• Condensation of water vapor plays a role in heating the lower atmosphere.
• Convection distributes heat vertically
What is troposphere?The lowest layer of the atmosphere of the earth is the troposphere. Most of the mass (about 75-80%) of the atmosphere is in the troposphere.
Most types of clouds are found in the troposphere, and almost all weather occurs within this layer.
The statements regarding the warming of the troposphere that are true include:
• Conduction only warms the shallow layer of air within a few centimeters of the ground
• Atmospheric gases do not readily absorb solar radiation
• Condensation of water vapor plays a role in heating the lower atmosphere.
• Convection distributes heat vertically.
Thus a,c,e,g are the correct statements regarding the warming of the troposphere
To know more about Troposphere follow
https://brainly.com/question/25526298
The power in an electrical circuit is given by the equation P= RR, where /is the current flowing through the circuit and Ris the resistance of the circuit. What is the current in a circuit that has a resistance of 100 ohms and a power of 15 watts?
[pleas ee helpppp)
I= 0.39 A
OPTION B is the correct answer.
How much power does it take to lift 70.0 N to 5.0 m high in 5.00 s?
Answer:
Power = 70 W
Explanation:
Given that,
Force, F = 70 N
Height, h = 5 m
Time, t = 5 s
We need to find the power of the object. We know that,
Power = work done/time
Put all the values,
[tex]P=\dfrac{Fd}{t}\\\\P=\dfrac{70\times 5}{5}\\\\P=70\ W[/tex]
So, the required power is 70 W.
What is the minimum value of the friction coefficient between the boxes that will keep them from slipping when the 100 N force is applied
Answer:
The friction coefficient's minimum value will be "0.173".
Explanation:
The given query seems to be incomplete. Below is the attached file of the complete question.
According to the question,
(a)
The net friction force's magnitude will be:
⇒ [tex]F_{net}=ma[/tex]
[tex]=5\times 1.7[/tex]
[tex]=8.5 \ N[/tex]
(b)
For m₃,
⇒ [tex]ma=\mu m_3 g[/tex]
Or,
⇒ [tex]\mu=\frac{a}{g}[/tex]
[tex]=\frac{1.7}{9.8}[/tex]
[tex]=0.173[/tex]
In another version of the "Giant Swing", the seat is connected to two cables as shown in the figure (Figure ), one of which is horizontal. The seat swings in a horizontal circle at a rate of 39.3 rev / m * i * n
If the seat weighs 268 N and a 896-N person is sitting in it, find the tension in the horizontal cable
If the seat weighs 268 N and a 896-N person is sitting in it, find the tension in the inclined cable
Answer:Solution to 47E Step 1 Angular velocity of the swing=32rpm Weight of the seat =255N Weight of the person =825N Total weight =255+825=1080N Radius =7.5m
Explanation: