A 1400.0 kg car crests a 3200.0 m pass in the mountains and briefly comes to rest. The car descends 1000 m before climbing and cresting a 2800 m pass. (a) Neglecting friction, what should the speed of the car be at the top of the second pass? (b) Find the actual speed of the car if the work due to nonconservative forces is – 5 x106 J.

Answers

Answer 1

Answer:

a) v = 88.54 m/s

b) vf = 26.4 m/s

Explanation:

Given that;

m = 1400.0 kg

a)

by using the energy conservation

loss in potential energy is equal to gain in kinetic energy

mg × ( 3200-2800) = 1/2 ×m×v²

so

1400 × 9.8 × 400 = 0.5 × 1400 × v²

5488000 = 700v²

v² = 5488000 / 700

v² = 7840

v = √7840

v = 88.54 m/s

b)

Work done by all forces is equal to change in KE

W_gravity + W_non - conservative = 1/2×m×(vf² - vi²)

we substitute

1400 × 9.8 × ( 3200-2800) - (5 × 10⁶) = 1/2 × 1400 × (vf²  -0 )

488000 = 700 vf²

vf² = 488000 / 700

vf² = 697.1428

vf = √697.1428

vf = 26.4 m/s


Related Questions

A tennis ball is dropped from a roof 16 meters from the ground. How long does it take
for the ball to reach the ground?

Answers

3.3 seconds would be the right answer

The time taken for the tennis ball dropped from the roof-top to reach the ground level is 1.8 seconds.

What is Motion?

Motion is simply the change in position of an object or particle over time.

From the Second Equation of Motion;

s = ut + (1/2)gt²

Where s is the distance from ground level, u is initial velocity, t is time elapsed and g is acceleration due to gravity ( g = 9.8m/s² ).

Given the data in the question;

Since the ball was initially at rest before it was dropped.

Initial velocity u = 0Height or distance from gound level s = 16mTime taken to reach the gound t = ?

We substitute our values into the expression above.

s = ut + (1/2)gt²

16m = ( 0 × t ) + ( (1/2) × 9.8m/s² × t² )

16m = 0.5 × 9.8m/s² × t²

16m = 4.9m/s² × t²

t² = 16m / 4.9m/s²

t² = 3.2653s²

t = √(3.2653s²)

t = 1.8s

Therefore the time taken for the tennis ball dropped from the roof-top to reach the ground level is 1.8 seconds.

Learn more about Equations of Motion here: brainly.com/question/18486505

#SPJ2

the equation of motion is given for a particle when s is in meters and t is in seconds. Find the acceleration after 4.5 seconds s

Answers

Answer:

Explanation:

The question is incomplete.

The equation of motion is given for a particle, where s is in meters and t is in seconds. Find the acceleration after 4.5 seconds.

s= sin2(pi)t

Acceleration = d²S/dt²

dS/dt = 2πcos2πt

d²S/dt² = -4π²sin2πt

A(t) = -4π²sin2πt

Next is to find acceleration after 4.5 seconds

A(4.5) = -4π²sin2π(4.5)

A(4.5) = -4π²sin9π

A(4.5) = -4π²sin1620

A(4.5) = -4π²(0)

A(4.5) = 0m/s²

In each of the given pairs, choose which element will have the bigger atom. Give reasons for your choice. (a) Mg (atomic number 12) or Cl (atomic number 17) (b) Na (atomic number 11) or K (atomic number 19)

Answers

Answer:

Mg (atomic number 12)

K (atomic number 19)

Explanation:

The size of an atom is estimated in terms of its atomic radius.

The atomic radius is taken as half of the inter-nuclear distance between two covalently bonded atoms of non-metallic elements or half of the distance (d) between two nuclei in the solid - state of metals.

Across a period, atomic radii decrease progressively from left to right. This is due to the progressive increase in the nuclear charge without increase in the number of electronic shells. Down a group, atomic radii increase progressively due to the successive shells of electrons being added which have been compensated for by the increase in nuclear charge.

Cl is further right of Mg in the third period

K is below Na in the first group

a box with a Constance velocity has a 5 N of force applied to it from all sides and direction. what will happen to the motion of the box as result?
A-the object will come to rest
b-the velocity of the object will remain the same
c- the velocity of the object will decrease
d- the velocity of the object will increase

Answers

Answer:

  b-the velocity of the object will remain the same

Explanation:

Forces from opposite sides cancel each other, so there is no net force on the box that would affect its motion. The velocity of the box will remain unchanged.

__

(The box may be crushed, but it will continue in the same direction at the same speed.)

Answer:

b the velocity of the object will remain the same

Explanation:

use your brain:)

an air filled parallel plate capacitor has a capacitor of 1.3 pico farad. the separation of the plates is doubled and wax is inserted between them, the new capacitance is 2.6 pico farad. find the dielectric constant of the wax​

Answers

you get 3.9 because i used to have this question

The acceleration of the spacecraft in which the Apollo astronauts took off from the moon was 3.4 m/s2 m / s 2 . On the moon, g g = 1.6 m/s2 m / s 2 . what's the apparent weight

Answers

Complete Question

The acceleration of the spacecraft in which the Apollo astronauts took off from the moon was 3.4 m/s2. On the moon, g = 1.6 m/s2.  What was the apparent weight of a 75 kg astronaut during takeoff?

Answer:

The value is  [tex]N = 375 \ N[/tex]

Explanation:

From the question we are told that

  The acceleration is  [tex]a = 3.4 \ m/s^2[/tex]

   The acceleration due to gravity in the moon is [tex]g = 1.6 m/s^2[/tex]

   The mass of the astronaut is  [tex]m = 75 \ kg[/tex]

   

Generally the apparent weight is mathematically represented as

      [tex]W = ma + mg[/tex]

=>    [tex]W = 3.4 * 75 + 1.6 * 75[/tex]

=>    [tex]W = 375 \ N[/tex]

Before the development of quantum theory, Ernest Rutherford's experiments with gold atoms led him to propose the so-called Rutherford Model of atomic structure. The basic idea is that the nucleus of the atom is a very dense concentration of positive charge, and that negatively charged electrons orbit the nucleus in much the same manner as planets orbit a star. His experiments appeared to show that the average radius of an electron orbit around the gold nucleus must be about 10−1010−10 m. Stable gold has 79 protons and 118 neutrons in its nucleus.
What is the strength of the nucleus' electric field at the orbital radius of the electrons?
What is the kinetic energy of an electron in a circular orbit around the gold nucleus?

Answers

Answer:

1. [tex] E = 1.14 \cdot 10^{13} N/C [/tex]

2. [tex]E_{k} = 9.1 \cdot 10^{-17} J[/tex]      

Explanation:

1. The strength of the nucleus' electric field (E):

[tex]E = \frac{kq}{r^{2}}[/tex]

Where:

k: is the Coulomb constant = 9x10⁹ Nm²/C²

q: is the proton charge = 1.6x10⁻¹⁹ C

r: is the radius = 10⁻¹⁰ m

[tex]E = \frac{kq}{r^{2}} = \frac{9\cdot 10^{9} Nm^{2}/C^{2}*79*1.6 \cdot 10^{-19} C}{(10^{-10} m)^{2}} = 1.14 \cdot 10^{13} N/C[/tex]

2. The kinetic energy (Ek) of an electron is the following:

[tex] E_{k} = \frac{1}{2}mv^{2} [/tex]    

Where:

m is the electron's mass = 9.1x10⁻³¹ kg

v: is the speed of the electron

We can find the speed of the electron by equaling the centripetal force (Fc) and the electrostatic force (Fe):

[tex] F_{c} = F_{e} [/tex]  

[tex] \frac{mv^{2}}{r} = \frac{kq^{2}}{r^{2}} = qE [/tex]

[tex] v^{2} = \frac{qEr}{m} = \frac{1.6 \cdot 10^{-19} C*1.14 \cdot 10^{13} N/C*10^{-10} m}{9.1 \cdot 10^{-31} kg} = 2.00 \cdot 10^{14} m^{2}/s^{2} [/tex]                  

Now, we can find the kinetic energy:

[tex] E_{k} = \frac{1}{2}mv^{2} = \frac{1}{2}9.1 \cdot 10^{-31} kg*2.00 \cdot 10^{14} m^{2}/s^{2} = 9.1 \cdot 10^{-17} J [/tex]    

I hope it helps you!

The car alarm on a stationary car emits sound waves with a frequency of 450 Hz. If you are moving away from the stationary car at 20 m/s, what alarm frequency do you perceive

Answers

Answer:

Explanation:

The frequency of wave is directly proportional to velocity

f = kV

k = f/V

f1/V1 = f2/V2

Given

f1 = 450Hz

V1 = 343m/s

f2 = ?

V2 = 20m/s

Substitute into the formula

450/343 = f2/20

Cross multiply

343f2 = 450×20

343f2 = 9000

f2 = 9000/343

f2 = 26.24Hz

the neuron is considered a (a. Cell. (B.artery. (C. Vein

Answers

Answer:

A Cell

Explanation:

Neurons are considered a cell :)

A race car accelerates from rest to a velocity of +90 m/s over a distance of 423m. Determine the acceleration of the race car.

Answers

Answer:

9.57m/s²

Explanation:

Given parameters:

Initial velocity  = 0m/s

Final velocity  = 90m/s

Distance  = 423m

Unknown:

Acceleration of the race car  = ?

Solution:

To solve this problem, we should apply one of the appropriate motion equations;

      V²  = U²   + 2as

Where V is the final velocity

           U is the initial velocity

           a is the acceleration

           s is the distance

  90²  = 0²  + 2 x a x 423

  8100 = 846a

      a  = 9.57m/s²

Define reflection of sound?​

Answers

The reflection of sound is the movement of sound waves bouncing off of a surface and back into another direction, hope this helped :)

How long is a day in Neptune

Answers

Answer: the long day in neptune would be .18383562 years!

Explanation:also for every day is 16 hours

An airplane accelerates down a runway at 4.3 m/s2​ ​ for 48 s until it finally lifts off the ground. Determine the distance traveled before takeoff.

I

Answers

Answer:

x=4953.6m

Explanation:

used formula x=xo+vot+1/2at^2

A person drops a marble from the top of a skyscraper. After falling four floors the marble has gained a certain speed. How many more floors will the marble have to fall to triple this speed?

a. 8
b. 12
c. 32
d. 48

Answers

Answer:

B. 12

Explanation:

4 x 3 = 12

What is the force of a 12 kg object that is accelerating 6 m/s

Answers

We are given:

Mass of object (m) = 12 kg

acceleration (a) = 6 m/s²

Solving for the Force:

From newton's second law of motion:

F = ma

replacing the variables

F = 12*6

F = 72N

Suppose a signal from a vibrating motor is to be sampled discretely with a digital data acquisition system to determine the RPM of the motor. It is known that the maximum possible RPM is 1800. What is the minimum sampling frequency (in Hz) with which the signal can be sampled in order to measure the RPM of the motor

Answers

Answer:

f > 60 Hz

Explanation:

According to Nyquist's Sampling Theorem, to be fully reconstructed without any aliasing,  the signal must be sampled at least more than twice during the period of the maximum frequency of the signal.In this case, the signal to be sampled has only one frequency.However, as we have the information in RPM, we need to convert this to cycles/sec (Hz) first, as follows:

       [tex]f = \frac{1800 rev}{min} * \frac{1 min}{60 sec} = 30 Hz[/tex]

Per Nyquist, fs > 2*30 Hz

        ⇒ fs > 60 Hz

Thanks to me, you can see straight through the wall. What am I?

Answers

Answer:

A window

Explanation:

Answer:

a window.. duh

Explanation:

A 20m length wire 1.5mm in diameter has a resistance of 2.5 ohm what is the resistance of a 35m length of wire 3mm in diameter made of the same material?​

Answers

From the calculations, the resistance of the material is 1.1 ohm.

What is the resistance of the wire?

Given that;

R α l/A

R = ρl/A

R = resistance

l = length

A = Area

ρ = resistivity

Now;

A = πr^2

A = 3.142 * (1.5 * 10^-3/2)^2

A = 1.77 * 10^-6 m^2

ρ = RA/l

ρ =  2.5 *  1.77 * 10^-6 /20

ρ = 2.2 * 10^-7 ohm/m

Now;

R =ρl/A

A =  3.142 * (3  * 10^-3/2)^2

A = 7.1 * 10^-6 m^2

Thus

R = 2.2 * 10^-7 * 35/ 7.1 * 10^-6

R = 1.1 ohm

Learn more about resistivity:https://brainly.com/question/14547003

#SPJ1

a man weighing 490 n on earth weighs only 81.7 n on the moon. His mass on the moon is__kg. (Use g=9.8 m/s2

Answers

Answer:

m = 50 [kg]

Explanation:

In order to solve this problem we must be clear about the difference between weight and mass. Weight is the product of mass by the acceleration of the planet or the star. While the mass is always preserved it never changes regardless of where it is located.

So for the earth we have:

g = gravity acceleration = 9.8 [m/s^2]

m = mass [kg]

W = weigth = 490 [N]

therefore the mass will be:

m = W/g

m = 490/9.8

m = 50 [kg]

Now it is important to remember that the mass will be the same on the moon or on the earth, but the weight will be different, because the gravity acceleration of the moon is different from the gravity acceleration on earth

So the gravity on the moon is equal to:

81.7 = 50 * gm

gm = 1.634 [m/s^2]

I need help with this please

Answers

The answer is Rubber

The feeling of weightlessness occurs because _____________________.

there is no supporting force under your mass.
there is no gravity present.
there is only a small amount of gravity present.

Answers

Answer:

there is only a small amount of gravity present.

Explanation:

this is because the only force acting upon your body during free fall is the force of gravity which is a non contact force.

how do you Convert 50 g to kg in an equation for physics

Answers

Answer:

Divide by 1000

Explanation:

A 849-kg car starts from rest on a horizontal roadway and accelerates eastward for 5.00 s when it reaches a speed of 35.0 m/s. What is the average force exerted on the car during this time

Answers

Answer:

The average force exerted on the car during this time is 5,943 N

Explanation:

Given;

mass of the car, m = 849 kg

initial velocity of the car, u = 0

time of motion of the car, t = 5.00 s

final velocity of the car, v = 35 m/s

The average force exerted on the car during this time is given by;

[tex]F = ma \\\\F = \frac{m(v-u)}{t}\\\\F = \frac{849(35-0)}{5}\\\\F = \frac{849(35)}{5}\\\\ F = 849*7\\\\F = 5,943 \ N[/tex]

Therefore, the average force exerted on the car during this time is 5,943 N

Answer:

5943N

Let's say (+x) = eastward

Average horizontal acceleration

ax = vx -v0x/5.00s

= 35.0m/s-0/5.00s

= +7.09m/s

From here we apply the second law of newton

During this period average horizontal force acting on car

Summation x = max = (849kg)(+7.09m/s²)

= 5943N

+5.943x10³N

= 5.94kN east ward.

Light of wavelength 580 nm falls on a slit that is 3.70×10−3mm wide. Part A Estimate how far the first brightest diffraction fringe is from the strong central maximum if the screen is 10.0 m away.

Answers

Answer:

Explanation:

wavelength λ = 580 x 10⁻⁹ m

slit width d = 3.7 x 10⁻⁶ m

distance of screen D = 10 m

distance of first bright fringe =  1.5 x λ D / d

= 1.5 x 580 x 10⁻⁹  x 10 / 3.7 x 10⁻⁶

= 2351.34  x 10⁻³ m

= 2351.34 mm .

A truck with a mass of 1330 kg and moving with a speed of 15.0 m/s rear-ends a 805 kg car stopped at an intersection. The collision is approximately elastic since the car is in neutral, the brakes are off, the metal bumpers line up well and do not get damaged. Find the speed of both vehicles after the collision in meters per second.

Answers

Answer:

The Speed of the vehicles is 9.34m/s

Explanation:

For an elastic collision the two bodies move with similar velocities after collision

Given

M1=1330kg

V1=15m/s

M2=805kg

V2=0(the car is parked on neutral)

The formula is

M1V1+M2V2=(M1+M2)V

1330*15+805*0=(1330+805)V

19950+0=2135V

2135V=19950

divide both sides by 2135

V=19950/2135

V=9.34m/s

how much power is used if it takes frank (a 450 N boy ) 3 seconds to run 2 meters ?

Answers

Answer:

300

Explanation:

450Newton × 2Meter ÷ 3sec

Weight of a person's muscles, bones, tendons, and ligaments.
A. flexibility
B. lean mass
C. aerobic

Answers

I’m pretty sure it’s lean mass but let another guy answer you before you use mine

What must be true if a wave's wavelength is short?
A
Its frequency is low.
B
It does not carry energy.
с
Its frequency is high.
D
The waves are visible.

Answers

C because it’s frequently is high

Answer:

im sure its A

Explanation:

Which of the following is true about the following lever?

Answers

Answer:

It will rotate counter-clockwise.

Explanation:

The reason is that there is more Nm on the left side which will lift the lever towards the left side.

The lever would rotate counterclockwise as the torque on the left is higher, so, option B is correct.

What is torque?

The force which causes the object to rotate about any axis is called perpendicular distance.

Torque is a twisting or turning force that frequently results in rotation around an axis, which may be a fixed point or the center of mass. The ability of something rotating, such as a gear or a shaft, to overcome turning resistance is another way to think of torque.

Given:

The force on the left side, f = 40 N,

The force on the right side, F = 80 N,

The distance of the pivot from the left side, d = 9 m,

The  distance of the pivot from the right side, d = 3 m,

Calculate the torque on both side as shown below,

Torque on the left side = 40 × 9

Torque on the left side = 360 Nm

Torque on the right side = 80 × 3

Torque on the right side = 240 Nm,

Here, the torque on the left side is more,

Thus, the lever will rotate counterclockwise.

To know more about torque:

https://brainly.com/question/28220969

#SPJ2

How long does it take a P-wave to travel 7,000 km? ______ minutes b) How long does it take an S-wave to travel 7,000 km? ______ minutes c) How long does it take a Love wave to travel 7,000 km? ______ minutes d) How long does it take a Rayleigh wave to travel 7,000 km? ______minutes

Answers

Answer:

A. 8.64 secs.

B. 14.58 secs.

C. 26.002 secs.

D. 33.46secs.

Explanation:

A. P wave would travel 7000km

p-wave travels on a speed of 13.5km/s

= 7000km/13.5km/s

= 8.64 secs.

B. S-wave time to travel 7000km

s-wave travels on a speed of 8km/s

= 7000km/8km/s

= 14.58 secs.

C Love wave travels at a speed of 10,000m/s ( 2.7778 m/s ).

= 7000km to miles

= 4349.598m/2.788m/s

= 26.002 secs.

D. Rayleigh wave to travel 7,000 km

10,000m/s ( 2.1667 m/s ).

= 7000km to miles

= 4349.598m/2.1667m/s

= 33.46secs.

Other Questions
luke paid 30 percent less for a used car than its original price of $3,500. how much did luke pay for the car? who was the third on the moon Can anyone help me? Please make sure to explain your answer to! :D answer and u can be brainlest when we observe an organism or environment what are we observing A. changes B. similarities C. colors The fees for a biochemistry major are $1,728. To major in biochemistry, Toby requires 144 credit hours of coursework. How can he calculate the cost of the fees per credit hour? What is the cost of the fees per credit hour? Janet enjoys eating jelly sandwiches and drinking milk. She is particular about proportions, though: For every jelly sandwich she eats, she must drink exactly one glass of milk, and vice versa. Janet can purchase the jelly for her sandwiches in two jar sizes: 20 ounces and 40 ounces. Janet cares only about the total amount of jelly she has available and not at all about the jar size. In other words, she's just as happy with two 20-ounce jars as she is with one 40-ounce jar.In this scenario, jelly sandwiches and glasses of soda are:___________ a. perfect complements b. perfect substitutes c. neither complements or susitutes) 4) How many milligrams are in 1,455 grams?1,455,000 mg145,000 mg1,450 mg1.45 mgO145 mg 3. Choose the correct answer.Over the mountain is a(n)complex sentenceindependent clausephrase A 50.0 g sample of an unknown substance, initially at 20.2 C, was heated with 1.55 kJ of energy. The final temperature of the substance was 125.0 C. Determine the specific heat of this substance. A muffin recipe uses 334 cups of flour for every 12 cup of milk. Which proportions could you use to solve for the cups of milk needed for 513 cups of flour? consider this algebraic expression: 5 + 3x 1 + 4xUse the algebra tiles to collect like terms.What is the simplified expression? Given the median, how do you find x on a triangle? Which information could a student determine from only the chemical formula of a protein Coulomb's law describes how the charge on and distance between twoparticles affect the electric force between them. Which situation will result inthe two particles being attracted to each other? Before the Pueblo Revolt there was not ________________________.a.a reduction in populationc.crop failure and famineb.a sharp increase in villagesd.Spanish became a common languagePlease select the best answer from the choices providedABCD help please fastttttt - How were black women involved in the fight for womens suffrage? What additional challenges did they face? PLEASE HELP Line A is represented by the equation, y = 1/4x + 5 . (a) Write in slope-intercept form, the equation of a line that is steeper than line A. (b) Write in slope-intercept form the equation of a line that is a vertical shift down 4 units from line A. Which friction static friction, kinetic friction, or air friction? Can be more than one response.Gripping friction.kinetic frictionair frictionstatic friction