A 1.41-kg block slides across a rough surface such that it slows down with an acceleration of 1.10 m/s2. What is the coefficient of kinetic friction between the block and the surface

Answer:

The net force is now 12

Explanation:

The boy is applying a force of 5 newtons + his mother is helping him to apply 7 newtons = 12 newtons.

Answer:

Weight of a 35kg object on Earth is 350N, while it is 56N on the Moon.

Explanation:

The conversion of mass (kg) to weight (N) on Earth is 1kg to 10N.
Thus, the weight of a 35kg mass on Earth is
35kg × 10 = 350N

On the Moon, conversion of mass to weight is 1kg to 1.6N.
Thus, the weight of a 35kg mass on the Moon is
35kg × 1.6 = 56N

Remember, mass remains constant regardless of location, while weight depends on the strength of the gravitational field.

The required lim t → ∝ v(t) when an object is dropped from rest is calculated to be mg/c.

Given that,

An object with mass m is dropped from rest and taking air resistance into account.

The velocity as a function of time is,

v(t) = (m g)/c [ 1 - e^-(ct/m)]

v(t) = (m g)/c [ 1 - 1/e^(ct/m)]

lim t → ∝ v(t) = (m g)/c [ 1 - 1/∝]

lim t → ∝ v(t) = (m g)/c ( 1 - 0)

lim t → ∝ v(t) = (m g)/c

Thus, the required lim t → ∝ v(t) when an object is dropped from rest is calculated to be mg/c.

The question is incomplete. The complete question is 'v = mg c (1 − e−ct/m) where g is the acceleration due to gravity and c is a positive constant describing air resistance. (a) Calculate lim t→∞ v.'

To know more about limits:

https://brainly.com/question/12989799

#SPJ4

Both the features of waves and particles can be seen in light.only photons and particles only photons and particles, only waves.

Both a wave as well as a particle description of light are possible.The dual character of light has been highlighted in particular by two investigations.When we consider that light is composed of tiny particles, we refer to those particles as "photons."

The following is the image for 'photons & particles combining waves and particles'.While electromagnetic radiation behaves both like a wave and a particle at the same time, it propagates according to linear wave equations and can only be released or absorbed in discrete pieces.

To know more about particles visit:

https://brainly.com/question/2288334

#SPJ4

The set of spectral lines that we see in a star's spectrum depends on the star's (b) chemical composition, (d) temperature.

The spectral lines of a star are determined by its chemical composition and temperature. These properties determine the number and type of atoms present in the star's atmosphere. Each type of atom has its own unique set of spectral lines, and the temperature of the star determines the energy level of the atoms, which affects the wavelengths of the spectral lines emitted. The rotation rate and atomic structure of a star do not affect the set of spectral lines we see in its spectrum.

learn more about spectral lines here

https://brainly.com/question/27494244

#SPJ4

The greater the mass of an object, the more particles there are in the sample and the more thermal energy it possesses at the same temperature. Assume you have some boiling hot water at 100 degrees Celsius to demonstrate this concept.

Thermal energy is shown by boiling water on a stove. Thermal energy is created when the atoms and molecules of a material vibrate faster as the temperature rises.

Mass is best defined as the quantity of matter contained in any item or body. Everything in our environment has mass. For example, a table, a chair, your bed, a football, a glass, and even air has mass. That being said, all objects are light or heavy because of their mass.

Learn more about   thermal energy  to visit this  link

https://brainly.com/question/18989562

#SPJ4

Answer:

I really hope this helps

Explanation:

Answer:

forest

Explanation:

cause of the echo

Answer:

forest

Explanation:

very spacious enough to make echo

The wool must start out negatively charged before becoming positively charged after donating its electrons to the rubber rod.

A rubber rod becomes negatively charged when wool is brushed against it, and the magnitude of the charge on the wool is equal to the charge on the rod. By applying the same amount of negative charge to the rod, the wool becomes positively charged.

Electrons generate energy while rubbing a polythene rod with a duster because of the friction. When they have enough energy, electrons can escape from an atom and "rub off" onto a polythene rod.

To know more about electrons visit:

brainly.com/question/12240595

#SPJ4

Answer: -200,000N

(To be more specific, 200,000N in the opposite direction)

Explanation:

By Newton's 3rd law (Action reaction pair)

The crumple zone exerts a force on the wall, the wall will exert an equal but opposite force on the wall.

Same magnitude -> 200,000N

Opposite direction-> Include a negative sign as force is a vector which depends on both magnitude and direction.

Answer:

taste buds

Explanation:

very sensitive microscopic hairs called microvilli. The tiny hairs send messages to the brain about how something tastes, so you know if it's sweet, sour, bitter, or salty

Steel is an alloy of iron and carbon. One of the main reasons steel is used more widely than iron is that it’s stronger than iron.

Steel, unlike other forms of iron, is strengthened by the addition of carbon, making it more resistant to fracture. Additional components are possible or even expected. To prevent corrosion and oxidation, stainless steels typically contain an extra 11% chromium. Steel's low price and high tensile strength make it a popular material for many different types of construction, as well as for transportation, manufacturing, and defense. Cast iron is the primary component of steel. It can crystallize in either a body-centered cubic or a face-centered cubic form, depending on the temperature. Steel and cast iron are characterized by a wide variety of properties due to the interaction of iron's various allotropes with the alloying elements, most notably carbon.

Want to know more about steel visit the link which is given below;

https://brainly.com/question/29222140

#SPJ4

If the lever is frictionless, to raise the rock a distance of 0.13 m, then the boy has to move the lever to 0.72 m.

An external force that acts upon an object results in a motion of the object, then it is called a work done upon the object by that force.

Given that the external force on a lever is 225 N and on a rock is 1250 N. The distance of motion by the rock is 0.13 m.

Hence the work done by the lever will be equivalent to the work done by the rock to move a particular distance.

Work (Lever) = Work (Rock)

F(lever) x D (lever) = F (rock) x D (rock)

225x D(lever)= 1250 x0.13

D(lever) is 0.72 m

Hence we can conclude that the distance of the motion by the lever is 0.72 m.

To know more about the work:

brainly.com/question/3902440.

#SPJ4

The objects must be of opposite charge because the electric force of attraction between them increases when they are released and free to move.

This means that the electric force must be a repulsive force that pushes the objects away from each other. Opposite charges attract and as charges repel, the objects must be of opposite charge for the electric force to increase when the objects are released and free to move.

Therefore when two small objects carry the same amount of charge, the magnitude of the electric force exerted by one object on the other is 0.10 N when they are held 30 mm apart. If the force magnitude increases when the objects are released and free to move, then we can say that they are opposite charges.

Learn more about charge:

https://brainly.com/question/25923373

#SPJ4

The work required to raise a 25.0 kg object from the surface of the earth to a height of 3.33 m

Formula: F = 25.0, D = 3.33, and W =?

W = F x D

Putting values together equals 25.0 x 3.33 W = 83.25 j.

Work = force times distance, or W = Fd.

F = W/d for force

Distance: W/F = d

W = work, F = force, and D = distance.

The integral of such a force applied over a displacement distance is referred to as "work." When one engages in work, they are doing something that requires them to use their strength or force.

When energy is transferred to an item, it is considered to have undergone work in science.

The integral of such a force applied over a displacement distance is referred to as work. When one engages in work, they are doing something that requires them to use their strength or force.

When energy is transferred to an item, it is considered to have undergone work in science.

The physics formula for work

The physics equation or formula is:

W = Fd

Work (force times distance)

For force, F = W/d.

Distance: W/F = d

The scalar dot product of force and displacement also yields work.

FDCos = W

Work-related SI unit :

Joule is the SI unit of work (J). The work performed by a force of one newton operating over a distance of one meter is defined as one joule in this context. kgm2s-2 is the SI base unit of work.

Work can be defined as the quantity of energy that a force transfers. Calculate work Another name for physics is the joule calculator. Work is represented by the letter "W."

Work is defined as a motion that is caused by a resisting force and is quantified by the force's product into the motion component that is resolved in the force's direction. The size of it is ML2T-2.

Learn more about Strength here:

https://brainly.com/question/9367718

#SPJ4

1 kilogramme of coal can provide 8 kWh of heat, hence power output here =30x8x10e6/1day =30x8x10e6x24 hours=2.7e15 joules

what is coal used for ?

In the United States, coal is largely utilised as a fuel to create electricity. Bituminous coal, subbituminous coal, or lignite are burnt in coal-fired power plants. The heat generated by coal combustion is utilised to turn water into high-pressure steam, which powers a turbine and generates electricity. According to the US Energy Information Administration, coal-fired power stations provided around 23% of all energy in the United States in 2019.

Steel may also be made from certain kinds of bituminous coal. Coal used to make steel must have a high carbon content while being low in moisture, ash, sulphur, and phosphorus. Metallurgical coal is coal that fits certain requirements.

1 kilogramme of coal can provide 8 kWh of heat, hence power output here =30x8x10e6/1day =30x8x10e6x24 hours=2.7e15 joules

To learn more about coal follow the given link: https://brainly.com/question/12703094

#SPJ4

Correct option is C, Centripetal force remains constant.

Centripetal Force -

Any force that changes the direction of motion toward the center of a circular motion is known as a centripetal force. The part of the force that produces the centripetal force is the part that is perpendicular to the velocity.

A net force that keeps an object moving in a circular motion is known as a centripetal force.

Centripetal force has the formula =mv2r. The newton or kgms2 is the measure of force.

A centripetal force is applied to any item travelling in a circle (or along a circular path). In other words, the object is being physically pushed or pulled in the direction of the circle's center. This is the necessary centripetal force.

To learn more about Centripetal force from given link

https://brainly.com/question/20905151

#SPJ4

At t = 0, the wheel has an angular position of 2.3 rad and an angular velocity of 1.5 rad/s.

Since the wheel is rotating about a fixed axis at a constant angular acceleration of -0.40 rad/s2, we can use the equation for angular position to calculate the wheel's angular position at t = 2.0 s.

Angular position = initial angular position + (initial angular velocity × time) + (1/2 ×angular acceleration ×time²)

Angular position at t = 2.0 s = 2.3 rad + (1.5 rad/s × 2.0 s) + (1/2 ×-0.40 rad/s2 × (2.0 s)²)

Angular position at t = 2.0 s = 2.3 rad + 3.0 rad + -1.6 rad

Angular position at t = 2.0 s = 3.7 rad

Learn more about angular velocity:

https://brainly.com/question/15154527

#SPJ4

The final velocity of the red-blue carts system is 5 cm/s.

The final speed of the two carts, that is the red cart and the blue cart system after the collision is calculated by applying the principle of conservation of linear momentum.

Pi = Pf

m₁u₁ + m₂u₂ = v ( m₁ + m₂ )

where;

m₁u₁ + 0 = v ( m₁ + m₂ )

m₁u₁ = v ( m₁ + m₂ )

v = ( m₁u₁ ) / ( m₁ + m₂ )

The final velocity of the red-blue carts system is calculated as;

v = ( 50 kg cm/s ) / ( 5 kg + 5kg )

v = 5 cm/s

Learn more about linear momentum here: https://brainly.com/question/7538238

#SPJ1

The complete question is below:

A red cart is moving rightward with a momentum of 50 kg cm/s when it collides with a blue cart of equal mass that is initially at rest. The two carts stick together and move to the right with the same speed after the collision. What is the final velocity of the two carts system after the collision if the mass of the blue cart is 5 kg.

The first question is asking which phase change occurs when steam is cooled to 100°C. The answer is condensation.

The second question is asking for the term that refers to the amount of energy needed to change a liquid into a gas, without changing its temperature. The answer is heat of vaporization.

The third question is asking in which phase change hydrogen bonds are formed. The answer is freezing.

The fourth question is asking for the amount of energy required to raise the temperature of 20 g of a substance from 72°C to 88°C, given that the specific heat of the substance is 0.215 J/g°C. To solve this problem, you can use the formula Q = m * c * delta T, where Q is the energy required, m is the mass of the substance, c is the specific heat, and delta T is the change in temperature. Plugging in the given values, you get Q = 20 g * 0.215 J/g°C * (88°C - 72°C) = 68.8 J. Therefore, the answer is 68.8 J.

Since I0 is the lowest sound intensity that a person with normal hearing can detect, it is chosen as the reference point. Given that log10 1 = 0, the decibel level of a sound with an intensity of 10–12 W/m2 is = 0 dB. In other words, the human hearing threshold is zero decibels.

The reference value I0 is 10–12 W/m2, which corresponds to the threshold of hearing intensity at 1000 Hz. The Sound Intensity Level, or SIL for short, is the intensity decibel scale. The related sign, like in our text, is LI.

Much more frequently than sound intensities in watts per square meter, sound intensity levels are expressed in decibels (dB). Both the scientific literature and the public media use decibels as their preferred measurement unit. The rationale behind this decision of units has to do with how we hear. There is a reference intensity, I0 = 1012 W/m2. The lowest or threshold intensity of sound that a person with normal hearing can perceive at a frequency of 1000 Hz is specifically known as I0. The degree of sound intensity is not the same as the intensity. is a unitless quantity that informs you of the sound level in relation to a predefined standard (1012 W/m2, in this case), as it is defined in terms of a ratio.

To learn more about intensity for sound level from given link

https://brainly.com/question/14468501

#SPJ4

Speed as the skier crashes into the snow bank: 0.434 m/s

Distance the snow compresses: 1.544 m

The speed of the skier as he crashes into the snow bank is the initial speed since there is no acceleration due to the lack of friction. The distance the snow compresses is calculated using the following equation:

compression = (mass x velocity2) / (2 x spring constant)

Therefore, compression = (75 kg x 0.4342) / (2 x 50 N/m) = 1.544 m

In this spring-mass system, the total energy equals the elastic potential energy at the moment the mass is temporarily at rest at x = A = 6 cm (i.e., at the extreme ends of the simple harmonic motion).

Thus, E kA2 2 and we see that as long as the spring constant k and the amplitude A remain unchanged,

the total energy is unchanged. Hence, the energy is still 12 J.

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ4

According to the question the rotational kinetic energy of a 12-kg motorcycle wheel is 809.14 J

The SI unit for rotational kinetic energy is the joule (J). The rotating kinetic energy formula has a similar structure to a translational kinetic energy equation. Kinetic energy is created by spinning objects around an axis. This type of energy is influenced by the object's mass, weight, and center of mass angle with respect to the axis.

Given data -

Mass = 12-kg

Angular velocity (ω) -120rad/s

inner radius = 0.280 m

outer radius = 0.330 m.

By using the formula

I = ½*M (r1² + r2²)

I = ½ *(12) * (0.2802 + 0.3302)

I = 1.1238 Kgm2

K.E = ½*Iω2

K.E = ½ * (1.1238)*(120)2

K.E = 809.14 J

To know more about rotational kinetic energy visit :-

https://brainly.com/question/30079962

#SPJ4

Due to this air resistance, Galileo discovered that heavier or more dense things fall more quickly than less dense ones. Together, a brick and a feather fell. The feather falls more slowly due to air resistance.

Descending against air resistance an object often experiences some air resistance as it falls through the air. The leading surface of the object collides with air molecules, creating air resistance. Several variables affect how much air resistance the object really experiences.

Therefore, heavier things fall quicker than lighter ones because the force of gravity acting on them is greater. As a result, heavier objects accelerate at faster speeds until the force of air resistance acts on them.

To know more about air resistance

https://brainly.com/question/25748718

#SPJ4

The required speed of the centre of mass of the two-railcar system after the collision will be half as much as it was before the collision.

One of the railroads has zero motion prior to the collision. Following it, both railroads move at the same speed. By the conservation of the total momentum of the system, we have,

m vi = m vf + m vf

m vi = 2 m vf

vi = 2 vf

vf = 1/2 vi

vf is the velocity after collision

vi is the velocity before collision

Thus, the speed of the railroad together after the collision is calculated to be half of that before collision.

To know more about speed:

https://brainly.com/question/28931654

#SPJ4

The maximum efficiency of the engine is a. 65.0%

The maximum efficiency of the heat engine is given by the Carnot efficiency, which is defined as:

Efficiency = (1 - (T cold / T hot)) * 100%

Where T cold is the temperature of the cold reservoir and T hot is the temperature of the hot reservoir.

Plugging in the given temperatures, we get:

Efficiency = (1 - (250 / 715)) * 100% = 65.0%.

So the answer is a. 65.0%.

So, using the temperatures given in the question:

Efficiency = 1 - (250 K/ 715 K) = 1 - 0.349 = 0.651 or 65.1%

Learn more about the efficiency of a heat engine here: https://brainly.com/question/16311666

#SPJ4

The time taken is 3.33 ns for light to travel 1.0 cm in a spectrophotometer.

What is time?

Time is defined as a scalar quantity that describes the progression of events in the universe. It is often considered to be the fourth dimension of spacetime, along with the three dimensions of space. Time is closely related to the concepts of causality, or the relationship between cause and effect, and is considered to be a fundamental aspect of the physical universe.

The distance light travels in 1 cm is equal to 1 cm x 10^-2 m. To find out how long it takes for light to travel this distance, we can use the formula:

time = distance / speed

Where distance is the distance light travels (1.0 cm x 10^-2 m), and speed is the speed of light in vacuum (3.0 x 108 m/s).

time = (1.0 cm x 10^-2 m) / (3.0 x 108 m/s)

time = 3.33 x 10^-10 s

To convert this time to nanoseconds (ns), we can multiply the time in seconds by 1 billion (10^9):

time = 3.33 x 10^-10 s x 10^9 ns/s

time = 3.33 ns

Therefore, the time taken is approximately 3.33 ns for light to travel 1.0 cm in a spectrophotometer.

To learn more about time from the given link:

https://brainly.com/question/26046491

#SPJ4

Insignificant are air resistance and rope mass. Point C on a support is where a rope of length L is fastened.

To learn more about mass refer to:

https://brainly.com/question/86444

#SPJ4