A 151 kg crate is pulled along a level surface by an engine. The coefficient of kinetic friction between the crate and the surface is 0.399. How much power must the engine deliver to move the crate at a constant speed of 6.04 m/s

This question is incomplete, the complete question is;

Super fine 40-gauge copper wire has a diameter of only 0.080 mm and weighs only 44.5 g/km. Suppose a spool of 40-gauge wire weighs 205 g less after some wire is pulled off to wind a magnet. How could you calculate how much wire was used ?

Answer: length of wire to be used is 4.6067 km

Explanation:

Circular diameter = d mm

Linear mass density of wire = μ g/km

let m be the mass of wire un-winded from spool to wind a magnet.

If M is mass of wire initially

then

Δm = M - m  { which represents decrease of mass }

Also if L rep the length of wire pulled off,

then

Δm = μ × L grams

⇒ L = Δm/μ km

now given that weight Δm = 205 g and length per unit weight μ = 44.5 g/km

we substitute

L = 205 g  / 44.5 g/km

L =  4.6067 km

Therefore length of wire to be used is 4.6067 km

Answer:

clear out the junk, and plant some stuff

Explanation:

clear out all of the nasties, unless it is biodegradable, or you could get some mushrooms to break everything down, then you can go and plant some stuff or do whatever. You could turn it into a playground, park, whatever.

Answer:

The car is considered to be speeding

Explanation:

The following data were obtained from the question:

Constant acceleration (a) = 7.4 m/s²

Time (t) = 2.4 s

Speed limit = 15.64 m/s

To know if the car speeding at any point, we shall determine the velocity of the car.

This can be obtained as follow:

Constant acceleration (a) = 7.4 m/s²

Time (t) = 2.4 s

Constant velocity (v) =?

a = v/t

7.4 = v / 2.4

Cross multiply

v = 7.4 × 2.4

v = 17.76 m/s

Thus, the velocity of the car is 17.76 m/s.

Comparing the velocity of the car (i.e 17.76 m/s) with the speed limit (i.e 15.64 m/s), we can see that the velocity of the car is higher than the speed limit. Therefore, the car is considered to be speeding.

Answer:

Look Below

Explanation:

Let's say you are kicking certain things. The first object is a soccer ball. Assume the ball is at rest using the Earth frame of reference. If you kick as hard as you can the ball it will go flying. Now change the soccer ball into a bowling ball. If you kick it as hard as you can again. It will not go as far. The same force that you applied to both the soccer ball and bowling ball allow it to accelerate, but the bowling ball which has more mass does not accelerate as much compared to the soccer ball due to the amount of mass it has.

Answer:

a) 37.70 m/s

b)710.6 m/s²

Explanation:

Given that ;

Mass of object = 2 kg

Radius of the motion = 2m

Frequency of motion = 3 rev/s

The formula to apply is;

v= 2πrf   where v is linear speed

v = 2×π×2×3 =12π = 37.70 m/s

Centripetal acceleration is given as;

a= 4×π²×r×f²  

a= 4×π²×2×3²

a=710.6 m/s²

Answer:

Kinetic energy is energy of motion

Explanation:

Of potential energy which is energy that is stored

Answer:

0.63 m/s²

Explanation:

Given that

Distance of meteor from earth's surface, r = 2.98R,

where R = radius of the Earth.

The force of the meteor due to the Earth is usually given by

F = GMM(a)/(R + r)² where

F = force exerted

G = gravitational constant

M = Mass of the earth

M(a) = mass of meteor

Remember that F = Ma, so applying that here, we have

acceleration of meteor = GM/(R + r)²

where r = 2.98R so that

acceleration of meteor = GM/(R + 2.98R)²

acceleration of meteor = GM/(3.98R)²

acceleration of meteor = GM / 15.84R²

It should be noted that GM/R² = 10, so

acceleration of meteor = 10/15.84

acceleration of meteor = 0.63 m/s²

Therefore as calculated, the acceleration of the meteor is 0.63 m/s²

Explanation:

Given that,

Number of turns in the coil, N = 100

Area of the coil, A = 100 cm² = 0.01 m²

It is placed at an angle of 70°.

Magnetic field, B = 0.1 Wb/m²

We need to find the magnetic flux through the coil and the emf is induced in the coil after 10⁻³ s.

Magnetic flux is given by :

[tex]\phi =BA\cos\theta\\\\\text{For N turns},\\\phi =NBA\cos\theta \\\\\phi=100\times 0.1\times 0.01\times \cos(70)\\\\=0.034\ Wb[/tex]

So, the magnetic flux through the coil is 0.1 Wb.

Emf induced in the coil is :

[tex]\epsilon=\dfrac{-d\phi}{dt}\\\\=\dfrac{0.034}{10^{-3}}\\\\=34\ V[/tex]

So, 34V of emf is induced in the coil.

Answer:

7.5N

Explanation:

Given parameters:

Mass of the ball  = 0.5kg

Acceleration  = 15m/s²

Unknown:

Force exerted by the kicker = ?

Solution:

To know the force exerted by the kicker, we use the mathematical expression below:

 Force  = mass x acceleration

This is based on Newton's second law of motion;

Now insert the parameters and solve;

  Force  = 0.5 x 15  = 7.5N

Answer:

B. Yes, because they glow more brightly as they increase in

temperature

Explanation:

Did the test !!

The coils in an electric heater blackbody are not radiators. Because, they absorb no energy and emit no light. Thus, the correct option is C.

Electric heating is a process in which the electrical energy is converted directly into the heat energy at around about 100% efficiency, using rather the cheap devices. Common applications which are included are space heating, cooking, water heating and industrial processes.

A radiator is the key component of the engine's cooling system. Radiator has the main role to disperse a mix of antifreeze and water molecules throughout the fins, which releases some of the engine's heat energy while taking in the cool air before continuing to pass the rest of the electric engine.

Therefore, the correct option is C.

Learn more about Electric heater here:

https://brainly.com/question/15629252

#SPJ2

Answer:

Ball moves up and down repeatedly on surface because waves consist of successive crests and troughs moving across surface, each crest pushes ball up and each trough allows it to move down.

Explanation:

Answer:

61.9°

Explanation:

The formula for calculating the workdone is expressed as

Workdone = Fdsin theta

F is the force applied on the crate

d is the distance covered

theta is the angle that the rope makes with the horizontal

Given

F = 40N

d = 7m

Workdone = 247J

Substituting into the formula:

247 = 40(7)sin theta

247 = 280sin theta

sin theta = 247/280

sin theta = 0.88214

theta = arcsin(0.88214)

theta = 61.9°

Hence the angle that the rope makes with the horizontal is 61.9°

Answer:

b and c

Explanation:

NASA might hire U.S. businesses and universities to do:  Research new ideas, build complex equipment. Hence, option (b) and (c) are correct.

Astronomy and space technology are used in space exploration to learn more about the universe. While astronomers use telescopes to explore the universe, both unmanned robotic space missions and human spaceflight also participate in the physical exploration of space. One of the main sources of space science, like its traditional form astronomy, is space exploration.

Although astronomy, or the study of celestial objects, has existed since the beginning of trustworthy written history, it wasn't until the mid-20th century that the possibility of physical space exploration became a reality.

Space exploration can lead to money going to U.S. businesses and universities. Hence,  NASA might hire U.S. businesses and universities to do:  Research new ideas, build complex equipment.

Learn more about Space exploration here:

https://brainly.com/question/1979086

#SPJ2

Answer:

5m

Explanation:

[tex]4^{2}+3^{2}=5^{2}\\5^{2}=25[/tex]

Use the Pythagorean theorem to calculate the long edge of the triangle, which would be his displacement.

[tex]\displaystyle v = 5.7735 \ m/s[/tex]

Math

Pre-Algebra

Order of Operations: BPEMDAS

Equality Properties

Physics

SI Units

Energy

Kinetic Energy Formula: [tex]\displaystyle KE = \frac{1}{2} mv^2[/tex]

Step 1: Define

Mass m = 30 kg

Kinetic Energy KE = 500 J

Step 2: Solve for v

Answer:B, universe, galaxy, solar system, earth

Explanation:

A p e x

Answer:

universe, Galaxy, solar system, earth

Explanation:

A P E X

Answer:

F = G  \frac{2 m^{2} }{r^{2} }

action and reaction forces with the same magnitude, but in the opposite direction, one applied to each body.

Explanation:

The force between the asteroids is given by the law of universal gravitation

           F = G m₁ m₂ / r²

in this case they give us the mass of each asteroid

           m₁ = m

           m₂ = 2m

we substitute

           F = G m 2m / r²

           F = G 2 m² / r²

            [tex]F = G \frac{2 m^{2} }{r^{2} }[/tex]

Let's analyze this expression, this is the force that one asteroid exerts on the other, therefore there are two forces, one applied to each asteroid, as the order of the products does not affect the result, the magnitude of the force is the same on each asteroid.

These are action and reaction forces with the same magnitude, but in the opposite direction, one applied to each body.

Consequently the two asteroid experiences the same magnitude of force

In order to find the formula for net force, multiply both sides by mass.

Newton's second law of motion states that the rate of change of momentum is directly proportional to the force applied.

Given is the acceleration as the ratio of net force and mass.

We can write acceleration as -

a = F[net]/m

If we have to find the formula for net force, we will multiply both sides by mass (m). Therefore -

a x m = (F[net]/m) x m

am = F[net]

or

F[net] = ma

Therefore, in order to find the formula for net force, multiply both sides by mass.

To solve more questions on Force, visit the link below-

https://brainly.com/question/17069586

#SPJ2

Answer:Total Inductive reactance XL =538.63 Ω

Explanation:

Parallel combination for Effective inductance is calculated as

L total =  [tex]\frac{1}{1/L1 + 1/L2 + ... 1/Ln}[/tex]

=[tex]\frac{1}{1/5 + 1/2}[/tex]

[tex]\frac{1}{0.2 + 0.5 \\}[/tex]

=[tex]\frac{1}{0.7}[/tex]

=1.42857H

Inductive reactance XL = 2 πFL

where f= frequency= 60Hz

L=  Effective inductance=1.42857H

Inductive reactance , XL = 2 X 3.142 X 60 X 1.42857

=538.63Ω

Answer:

On the way to the Moon the Apollo astronauts reached a point where the. Moon's gravitational pull became stronger, than the Earth's. (a) Determine the distance of ...

Explanation:

Answer:

8000Ns

Explanation:

Given parameters:

Mass of the truck  = 1000kg

Initial velocity  = 9m/s

Final velocity  = 17m/s

Unknown:

Impulse  = ?

Solution:

The impulse experienced by the truck is the the change in momentum of the body.

  Impulse  = Ft

        Momentum  = m(v  - u)

        Ft  = m( v - u )

 F is the force

 t is the time

 m is the mass

  v is the final velocity

 u is the initial velocity

     Impulse  = 1000(17 - 9) = 8000Ns

Answer: pointing back

Explanation:

Answer:

10000N

Explanation:

Given parameters:

Mass of the car  = 1000kg

Acceleration = 3m/s²

g  = 10m/s²

Unknown:

Weight of the car  = ?

Solution:

To solve this problem we must understand that weight is the vertical gravitational force that acts on a body.

 Weight  = mass x acceleration due to gravity

So;

    Weight  = 1000 x 10  = 10000N

Answer:

Simply, it's just the velocity at a given moment in time.

Explanation:

Instantaneous velocity is basically just short for the velocity of something at any given time. To give an example, let's say I wind up a toy car and set him to go forward for 10 seconds, and 5 seconds in, I freeze time. The speed of the car at that moment is the instantaneous velocity.

Answer:

See the answer below

Explanation:

To solve this problem we must use the definition of power and work in physics.

a)

The function of the conveyor belt is to carry the boxes from an initial point that is at low altitude to an end point that is at high altitude. In this way the conveyor belt prints a speed to the box to be able to raise it to the required vertical distance.

Since we have a velocity at the beginning and then we place the box at a high position, where then the box remains at rest, we can say that it converts kinetic energy to potential energy.

b)

Power is defined as the relationship of work over time. Therefore we have:

[tex]P=W/t[/tex]

where:

P = power = 3.8 [kW] = 3800 [W]

W = work [J]

t = time = 14 [s]

[tex]W=P*t\\W=3800*14\\W= 53200[J] = 53.2[kJ][/tex]

c)

Since the given time is equal to the given time at Point b, we can use the same work calculated.

We know that work is defined as the product of force by the distance traveled.

[tex]W =F*d[/tex]

So, the force is equal to:

[tex]F=W/d\\F=53200/5.3\\F=10037.73[N][/tex]

Now we know that force is defined as the product of mass by gravitation acceleration.

[tex]F =m*g[/tex]

where:

F = force or weight = 10037.73 [N]

g = gravity acceleration = 9.81 [m/s²]

m = mass [kg]

[tex]m=F/g\\m = 10037.73/9.81\\m = 1023.2 [kg][/tex]

d)

This part can be solved by means of the energy conservation theorem, where the potential energy is transformed into kinetic energy or vice versa.

[tex]E_{pot}=m*g*h = E_{kin}=0.5*m*v^{2}[/tex]

where:

h = elevation = 4.7 [m]

v = velocity [m/s]

[tex]m*g*h=0.5*m*v^{2}\\g*h=0.5*v^{2} \\v=\sqrt{\frac{g*h}{0.5} } \\v=\sqrt{\frac{9.81*4.7}{0.5} } \\v = 9.6 [m/s][/tex]