A 2.00kg block is attached to a horizontal ideal spring with a spring constant k=100Nm. The block-spring system is set on a horizontal surface with negligible friction. A graph of the potential energy U as a function of time t for this system is shown. The maximum displacement xMAX of the block from its equilibrium position and the maximum speed vmax of the block during the motion represented by the graph are most nearly
Answers
We have that for the Question, it can be said that the maximum velocity is
[tex]V_m = 1.414m/s[/tex]
From the question we are told
A 2.00kg block is attached to a horizontal ideal spring with a spring constant k=100Nm.
The block-spring system is set on a horizontal surface with negligible friction.
Generally the equation for the Potential energy is mathematically given as
[tex]P.E=\frac{1}{2}Rx_m^2\\\\2=\frax{1}{2}*100x_m^2\\\\x_m^2 = 0.04m\\\\x_m = 0.2m[/tex]
The PE is converted to KE, Therefore
[tex]KE = 2\\\\\frac{1}{2}MV_m^2 = 2\\\\V_m^2 = \frac{4}{M}\\\\V_m^2 = \frac{4}{2}\\\\V_m = \sqrt{2}\\\\V_m = 1.414m/s[/tex]
For more information on this visit
https://brainly.com/question/23379286
Complete Question
A 2.00 kg block is attached to a horizontal ideal spring with a spring constant k = 100 N The block-spring system is set on a horizontal surface with negligible friction. A graph of the potential energy U as a function of time t for this system is shown. The maximum displacement IMAX of the block from its equilibrium position and the maximum speed Umat of the block during the motion represented by the graph are most nearly A IMAX = 2.0 m and UMAX 1.4" B UMAX = 1.4 and UMAX=0.20" с MAX 0.20 m and UMAX = 1.4" D IMAX 0.40 m and UMAX 1.4 E IMAX 0.04 m and UMAX 2.0"
Related Questions
plzz explain how it is 66 m
i know that distance =speed × time so how it is 66 m not a
0.4 and if there us another rule plz explain like if u day that 1/2 ×speed ×time plz explain why u used 1/2 or when do I use the 1/2 rule
Answers
Hi there!
For someone to hear an echo, the sound must echo and bounce back to the person.
Thus, the sound travels TWICE the distance from the person to the wall (to the wall and back).
We know that:
d = st (distance = speed × time)
Let L = distance from person to wall
Thus:
2L = st
2L = 330 × 0.40
2L = 132
L = 66 m
What do you notice about the lines of earthquakes and volcanoes and where they seem to occur on Earth's surface?
Answers
Answer:
Most earthquakes and volcanoes occur because of the movement of the plates, especially as plates interact at their edges or boundaries.
Explanation:
There are no risks when taking medication to treat anxiety.
Please select the best answer from the choices provided.
T
F
Answers
Answer:
False
Explanation:
Answer:
The answer is False
Explanation:
What force would be required to accelerate a 1,100 kg car to 0. 5 m/s2? N.
Answers
Answer:
550 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question
mass = 1100 kg
acceleration = 0.5 m/s²
We have
force = 1100 × 0.5 = 550
We have the final answer as
550 NHope this helps you
Answer:
If your filling in the blank on edge then its 550
Explanation:
The part of the shore that represents the water's edge and migrates back and forth with the tide is known as the ________.
Answers
Answer :It is know as the shore line
Explanation:
PLEASE ANSWER ASAP
A 5 kg bowling ball traveling at 2 m/s hits a motionless 10 kg bowling ball. If the smaller ball bounces back at a speed of -1 m/s, what will be the speed of the larger ball after the collision?
Answers
Hi there!
Recall the conservation of momentum:
m1v1 + m2v2 = m1v1' + m2v2'
Let m1 = 5 kg ball and m2 = 10 kg ball
Since m2 is at rest, we can rewrite:
m1v1 = m1v1' + m2v2'
Plug in the given values:
5(2) = 5(-1) + 10v2'
Solve for v2':
10 = -5 + 10v2'
15 = 10v2'
15/10 = 1.5 m/s
We know that,
m1v1 + m2v2 = m1v1' + m2v2'
5 x 2 + 0 = 5 x -1 + 10 x v2'
10= -5 +10 x v2'
15 = 10 x v2'
v2' = 15/10
v2' = 1.5 m/s
hence , the speed of the larger ball after the collision will 1.5m/s
Image credit: The Hubble Heritage Team (AURASTSCI/NASA)
To which category does galaxy #2 belong? Why does it belong in this category?
WRITER
Answers
Can i ask u a question
how to do the next ques for moreBrainliest me please
Consider the dot diagrams for Objects A, B, and C. The arrow-
represents the direction of motion. Match the motion of
Objects A, B, and C to one of the lines on the graph.
Numbers can be used only one time.
A
2
B
Pos'n
3
С
-t
Tap
A matches graph:
B matches graph:
C matches graph:
4
5
6
--
Pos'n
t
Answers
What substance is a polymer found in nature?
Answers
Silk,wool, DNA, cellulose and protein
Please help thank you!
Answers
Answer:
mass, weight
Explanation:
mass is constant, and weight is dependant on your location
Answer:
I think d
Explanation:
because distance j
has to be the last one that's the only one with distance
Which statement indicates that motion has occurred?
A. The reference point has changed.
B. The position of the object has changed.
C.The object has not changed.
D. The object being described has changed
Answers
What event has inspired your life so far? How has this event changed you?
Easy pts! I will give Brainliest. :)
Answers
NEED ANSWER ASAP!
Which statement about a converging lens is not correct?
A ray parallel to the principal axis of the lens is refracted through the principal focus.
B All rays of light refracted by the lens pass through the principal focus.
C The distance between the centre of the lens and the principal focus is the focal length
D The principal focus of the lens is a point on the principal axis.
Answers
Geometric optics allows you to find which the correct answer about which false statement is:
B) All rays of light refracted by the lens pass through the principal focus.
Geometric optics studies the formation of images using the light geometric properties of optical systems, the main expression for this is:
[tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]
Where f is the focal length, p and q the distance to the object and the image respectively.
There are some points of special interest:
Object at infinity (p = ∞). In this case of the expression we see that the image is at the focal length. Image at infinity (q = ∞). In this case the object is at the focal point.
Let's analyze the claims.
A) True. A parallel ray comes from infinity and the image is formed at the focal point.
B) False. The image point is given by the expression above and depends on the distance to the object.
C) True. This is the definition of focal length.
D) True. All distances are measured from the main axis.
In conclusion, using geometric optics we can find that the correct answer about which false statement is:
B) All rays of light refracted by the lens pass through the principal focus.
Learn more about geometric optics here: brainly.com/question/2548694
A boy drops a stone in a well and finds it takes 2.60 seconds to hit the water.
A) How deep is the well?
B) With what speed does the stone hit the water?
Answers
Answer:
(i) How deep is the well (Height)
=> t = √(2H/g)
=> √2H = t × g
=> 2H = t² × g²
=> 2H = (2.60)² × (10)²
=> 2H = 6.76 × 100
=> 2H = 676
=> H = 676 ÷ 2
=> H = 338 m
(ii) speed of the stone:
=> v = √(2Hg)
=> v = √(2 × 338 × 10)
=> v = √6760
=> v = 26√10 m/s
How many revolutions does the motor shaft turn through between the time when the current is reversed and the instant when the angular velocity is zero
Answers
Answer:it equals 0
Explanation:hope this is a good answer
Angular velocity is the ratio of angular displacement to time. Then the number of turns by the shaft is zero.
What is angular velocity?The rate of change of angular displacement is called angular velocity. It is a vector quantity.
We know that the angular velocity formula
[tex]\rm Angular \ velocity = \dfrac{Angular \ displacement}{time}[/tex]
The motor shaft turns through between the time when the current is reversed and the instant when the angular velocity is zero.
Then the number of turns will be
[tex]\rm Number \ of\ turns = Angular \ velocty \times time \\\\Number \ of\ turns = 0 *time \\\\Number \ of\ turns = 0[/tex]
The number of turns by the shaft is zero.
More about the Angular velocity link is given below.
https://brainly.com/question/7359669
A teacher has two radioactive sources, A and B.
Source A has a longer half-life than source B.
What can be deduced about the nuclei in source A compared with the nuclei
in source B?
Do not refer to isotopes in your answer.
Answers
Answer:
The nuclei of source have greater stability than those of source B.
1. If the mass of an object is measured in kg and the velocity is measured in m/s, what is the unit for momentum?
Answers
The unit for momentum is equal to Kgm/s.
Given the following data:
Unit of mass = Kilogram (kg).Unit of velocity = meter per seconds (m/s).To determine the unit for momentum:
What is momentum?In Science, momentum can be defined as a multiplication of the mass of an object and its velocity.
Mathematically, momentum is giving by this formula;
[tex]Momentum = mass \times velocity[/tex]
Substituting the given parameters into the formula, we have;
[tex]Momentum = kg \times m/s\\\\[/tex]
Momentum = Kgm/s.
Read more on momentum here: brainly.com/question/15517471
If the resistor is connected in series, the voltage across the wire changes. (true or false)
Answers
On some strange planet you find that a 17.4 kg object falls downward 28.8 meters in 5.5 seconds. What is the magnitude of the acceleration due to gravity on this planet
Answers
Hi there!
[tex]\large\boxed{g = 1.904 m/s^2}[/tex]
Acceleration of gravity is unaffected by an object's mass.
In the absence of air resistance, we can use the following kinematic equation:
d = vit + 1/2at²
The object falls from rest, so:
d = 1/2at²
The acceleration in this instance is gravity, our unknown. We can rearrange the equation to solve for 'g':
2d/t² = g
2(28.8)/(5.5²) = 1.904 m/s²
A fan operating at 260V with a current being supplied at 13A. What is the effective resistance at which it is being operated?
Answers
Answer:
20 ohms
Explanation:
Resistance=Potential difference÷Electric current
X=260÷13
X=20
The following diagram shows a person exerting a
300.-newton force on the handle of a shovel that
makes an angle of 60. with the horizontal ground.
Determine the magnitude of the component of the
force perpendicular to the ground.
Answers
Answer:
260 Newtons
Explanation:
Okay, so what you have to do is know what the question is asking. It wants to know the force perpendicular to the ground. We know perpendicular makes a right angle, so we use the diagram to make it into a right triangle with a degree of 60, and hypotunese of 300 newtons. Now, we use basic trigonometry, we place x on the horizontal side since it perpendicular to the ground. We know it´s sin because x is opposite to 300 which is the hyp.
Sin= opp/hyp
x/300
sin(60)= x/300
300*sin(60)= 259.8, which rounds to
260 Newtons
There is your answer :D. Happy to help.
The component of the force which is perpendicular to the ground is → F [y] = 261 a[y].
What are the components of a Vector?A vector V making an angle θ with the x - axis, can be resolved into two two components along the x and y - axes respectively as →
V = Vcosθ a[x] + Vsinθ a[y]
where -
a[x] is the unit vector along the +x axis
a[y] is the unit vector along the +y axis.
Given is a force of magnitude 300 N acting on the handle that makes an angle of 60° with the horizontal ground.
The component normal to the ground will be the component along the y - axis. The component along the y - axis is the sine component. Suppose that vector F represents the force of magnitude (|F|) 300 N. The component perpendicular to the ground will be -
F [y] = |F| sinθ a[y]
F [y] = 300 x sin(60°) a[y]
F [y] = 300 x 0.87
F [y] = 261 a[y]
Therefore, the component of the force which is perpendicular to the ground is → F [y] = 261 a[y].
To solve more questions on Vector Resolution, visit the link below-
https://brainly.com/question/27199886
#SPJ2
Dhdjrjfbjsjfnsmctejzbrnj
Answers
The answer is D
I hope this helps :)
the homogenvity of s=ut+1/2at^2
Answers
A block of wood mass 0.60 kg is balanced on top of a vertical port 2.0 m high. A 10 gm
bullet is fired horizontally into the block and the embedded bullet land at a 4.0 m from
the base of the port. Find the initial velocity of the bullet.
A. 10 3 m/s B. 8.32 m/s C. 3.82 m/s D. 1.0 m/s
Answers
Answer:
m V1 = (m + M) V2 conservation of momentum
T = time to fall 2 m
2 = 9.8 / 2 T^2 initial vertical velocity zero
T^2 = 4/9.8 T = .639 sec
Sx = V2 * .639 sec distance traveled horizontally
V2 = 4 /.639 = 6.26 m/sec
V1 = (m + M) / m * 6.26 m/sec from first equation
V1 = (600 + 10) / 10 * 6.26 m/s = 382 m/s
There seems to be some confusion on units
Note that 382 m/s is a reasonable answer for speed of bullet
1100 ft/sec is reasonable for a .22 cal bullet
1100 ft/sec / 3.28 ft/m = 335 m/sec
22.13 .. Two very long uniform lines of charge are parallel and are separated by 0.300 m. Each line of charge has charge per unit length 5.20 mC>m. What magnitude of force does one line of charge exert o
Answers
Answer:
Two very long uniform lines of charge are parallel and are separated by 0.300 m. Each line of charge has charge per unit length.
Explanation:
What are nucleic acids, and what are their function and structure? Give an example
Answers
2) Their function and structure is carry genetic information which is read in cells to make the RNA and proteins by which living things function.
....................................
Answers
Answer:
yeah
Explanation:
An object with a mass of 90 grams, moving at a constant velocity of 6 meters per second, has __________. A. A momentum of 540 gram meters per second B. An acceleration of 10 meters per second squared C. A momentum of 90 gram meters per second D. An acceleration of 6 meters per second squared Please select the best answer from the choices provided. A B C D.
Answers
Answer: 540 g m/s.
Explanation:
Answer: A.
A momentum of 540 gram meters per second!
Explanation: On Edge!!
A car was sitting in sunlight all day long. The heat that is now contained in the car was transferred to the car primarily by which of the following processes? Question 1 options: radiation conduction convection electrical energy transfer.
Answers
How much force is needed to accelerate a 70 kg rider and the 200kg motorcycle the
rider is on at 4m/s?
Answers
Answer: F = (200 kg + 70 kg) * 4 m/s² = 270 kg* 4m/s² = 1080 N
Answer:
F = 1080 N
Explanation: