A bank makes four kinds of loans to its personal customers and these loans yield the following annual interest rates to the bank:

First mortgage 14%
Second mortgage 20%
Home improvement 20%
Personal overdraft 10%
The bank has a maximum foreseeable lending capability of £250 million and is further constrained by the policies:

first mortgages must be at least 55% of all mortgages issued and at least 25% of all loans issued (in £ terms)
second mortgages cannot exceed 25% of all loans issued (in £ terms)
to avoid public displeasure and the introduction of a new windfall tax the average interest rate on all loans must not exceed 15%.
Formulate the bank's loan problem as an LP so as to maximize interest income whilst satisfying the policy limitations.

As per the confidence interval, Lower Bound is 94.874 and the Upper Bound is 105.126

Sample Mean = 100

Sample Standard Deviation = 8

Sample Size = 20

Calculating the confidence interval -

Confidence Interval = Sample Mean ± (Critical Value) x (Standard Deviation / √(Sample Size))

Substituting the values

= 100 ± (2.860) x (8 / √20)

= 100 ± 2.860 x (8 / 4.472)

= 100 ± 2.860 x 1.789

= 100 ± 5.126

Calculating the lower bound -

Lower Bound = 100 - 5.126 = 94.874

Calculating the upper bound -

Upper Bound = 100 + 5.126 = 105.126

Read more about confidence interval on:

https://brainly.com/question/20309162

#SPJ4

Only option d. (2, 4) matches the point on the graph of f^(-1) corresponding to the y-value of -12.

Given that (-4, 2) is a point on the graph of a one-to-one function f, we can determine the point on the graph of f^(-1) (the inverse function of f) corresponding to the y-value of -12.

To find this point, we need to swap the x and y coordinates of the given point (-4, 2) and consider it as the new point (2, -4).

Now, we need to determine which of the listed points is on the graph of f^(-1) with a y-value of -12.

Let's evaluate each of the listed points:

a. (-4, -2): Swapping the x and y coordinates gives (-2, -4), which does not match the given point (2, -4).

b. (4, -2): Swapping the x and y coordinates gives (-2, 4), which does not match the given point (2, -4).

c. (-2, 4): Swapping the x and y coordinates gives (4, -2), which does not match the given point (2, -4).

d. (2, 4): Swapping the x and y coordinates gives (4, 2), which matches the given point (2, -4).

Among the given options, only option d. (2, 4) matches the point on the graph of f^(-1) corresponding to the y-value of -12.

Therefore, the correct answer is d. (2, 4).

Learn more about graph here

https://brainly.com/question/19040584

#SPJ11

Evaluating each expression using the values given in the table :

a. (f ∘ g)(1) = -2

b. (f ∘ g)(-1) = 3

c. (g ∘ f)(-1) = 0

d. (g ∘ f)(0) = -1

e. (g ∘ g)(-2) = 1

f. (f ∘ f)(-1) = 3

Here is the explanation :

To evaluate each expression, we need to substitute the given values into the functions f(x) and g(x) and perform the indicated composition.

a. (f ∘ g)(1):

First, find g(1) = 0.

Then, substitute g(1) into f: f(g(1)) = f(0) = -2.

b. (f ∘ g)(-1):

First, find g(-1) = 1.

Then, substitute g(-1) into f: f(g(-1)) = f(1) = 3.

c. (g ∘ f)(-1):

First, find f(-1) = 1.

Then, substitute f(-1) into g: g(f(-1)) = g(1) = 0.

d. (g ∘ f)(0):

First, find f(0) = -2.

Then, substitute f(0) into g: g(f(0)) = g(-2) = -1.

e. (g ∘ g)(-2):

First, find g(-2) = -1.

Then, substitute g(-2) into g: g(g(-2)) = g(-1) = 1.

f. (f ∘ f)(-1):

First, find f(-1) = 1.

Then, substitute f(-1) into f: f(f(-1)) = f(1) = 3.

To know more about the indicated composition refer here :

https://brainly.com/question/29177072#

#SPJ11

With n = 1, the total time elapsed before the ball comes to rest is 0.4 units of time. The total time elapsed before the ball comes to rest is represented by the formula t = (1/2)∑(0.8)^n as n approaches infinity.

The ball takes the same amount of time to bounce up as it does to fall, starting from the second bounce (n = 1). This means that for each subsequent bounce, the time it takes for the ball to reach its maximum height and return to the ground is the same.

The total time elapsed before the ball comes to rest is given by the formula t = (1/2)∑(0.8)^n, where n represents the number of bounces and ∑ denotes the summation notation. In this case, the summation starts from n = 1 and goes to infinity.

To calculate the total time, we substitute n = 1 into the formula: t = (1/2)(0.8)^1 = 0.4. Therefore, with n = 1, the total time elapsed before the ball comes to rest is 0.4 units of time.

to practice more on time elapsed problems, visit: brainly.com/question/30266030

#SPJ11

From the set of whole numbers 1 to 10 , we randomly select one number . The probability that the number is greater than 4 ( > 4 ) is 0.6. True

The statement is true because the probability given is greater than 0.5, indicating a higher likelihood of selecting a number greater than 4 from the set of whole numbers 1 to 10.

To understand this, we can consider the concept of probability. Probability is a measure of the likelihood of an event occurring, ranging from 0 (impossible) to 1 (certain). In this case, the probability of selecting a number greater than 4 is given as 0.6, which is greater than 0.5.

When the probability is greater than 0.5, it means that the event is more likely to happen than not. In other words, there is a higher chance of selecting a number greater than 4 from the set of whole numbers 1 to 10.

Since the set of numbers includes values from 1 to 10, and the probability is specifically stated for selecting a number greater than 4, it aligns with the understanding that a number greater than 4 has a higher likelihood of being chosen. Thus, the statement is true.

Learn more about probability:

https://brainly.com/question/13604758

#SPJ11

a. Dan's z-score is 1.5.

b. Dan scored better than approximately 6.68% of his classmates.

To find Dan's z-score, we'll use the formula:

z = (x - μ) / σ

Where:

x = Dan's score (83)

μ = mean (65)

σ = standard deviation (12)

a. To find Dan's z-score:

z = (83 - 65) / 12

z = 1.5

Therefore, Dan's z-score is 1.5.

b. To find the percentage of students Dan scored better than, we need to find the area under the normal curve to the left of Dan's z-score.

From the z-score table, we can see that the area to the left of z = 1.5 is approximately 0.9332.

To find the percentage of students Dan scored better than, we subtract this value from 1 and multiply by 100:

Percentage = (1 - 0.9332) * 100

Percentage = 6.68

Therefore, Dan scored better than approximately 6.68% of his classmates.

To know more about z-score here

https://brainly.com/question/30186190

#SPJ4

The area under the standard normal curve to the left of z = 1.04 is approximately 0.8508.

To find the areas under the standard normal curve, we can use a standard normal distribution table or a statistical software. I will provide the calculated areas for the given scenarios:

a. Area from z = 0 to z = 1.46:

The area under the standard normal curve from z = 0 to z = 1.46 is approximately 0.4306.

b. Area from z = -0.32 to z = 0.98:

The area under the standard normal curve from z = -0.32 to z = 0.98 is approximately 0.5531.

c. Area from z = 0.07 to z = 2.51:

The area under the standard normal curve from z = 0.07 to z = 2.51 is approximately 0.4940.

d. Area to the right of z = 2.13:

The area under the standard normal curve to the right of z = 2.13 is approximately 0.0166.

e. Area to the left of z = 1.04:

The area under the standard normal curve to the left of z = 1.04 is approximately 0.8508.

Now let's move on to the second part:

B. Find the value of z for the given areas:

To find the value of z corresponding to a specific area under the standard normal curve, we can use a standard normal distribution table or a statistical software. Here are the approximate values of z for the given areas:

For an area under the curve from 0 to z of approximately 0.1965, the corresponding value of z is approximately -0.84.

For an area under the curve from 0 to z of approximately 0.2740, the corresponding value of z is approximately 0.61.

For an area in the left tail of approximately 0.2050, the corresponding value of z is approximately -0.84.

For an area to the right of z of approximately 0.6285, the corresponding value of z is approximately 0.33.

Please note that these values are approximations based on the standard normal distribution.

For more questions on area

https://brainly.com/question/25292087

#SPJ8

The product 10 sin(30c)sin(22c) can be expressed as a sum using the trigonometric identity for the product of two sines: sin(A)sin(B) = 0.5[cos(A-B) - cos(A+B)]. Therefore, the expression simplifies to 5[cos(30c - 22c) - cos(30c + 22c)].

To express the product 10 sin(30c)sin(22c) as a sum, we can utilize the trigonometric identity sin(A)sin(B) = 0.5[cos(A-B) - cos(A+B)]. By applying this identity, we have:

10 sin(30c)sin(22c) = 10 * 0.5[cos(30c-22c) - cos(30c+22c)]

                    = 5[cos(8c) - cos(52c)]

Therefore, the product can be expressed as the sum 5[cos(8c) - cos(52c)]. We use the trigonometric identity to transform the product of sines into a difference of cosines. By simplifying the expression, we achieve a sum representation that involves the difference of two cosine functions evaluated at different angles.

This sum representation provides a way to rewrite the given product in a more concise form, making it easier to manipulate or analyze further if needed.

Learn more about trigonometry here:

https://brainly.com/question/11016599

#SPJ11

The polynomial P(x) that minimizes the error integral w(x) * (x ^ 5 - P(x)) ^ 2 dx from -1 to 1 among all polynomials of degree 2 is P(x) = -3x^3 + 3x^2 + 3x + 1.

The error integral w(x) * (x ^ 5 - P(x)) ^ 2 dx from -1 to 1 can be minimized by choosing P(x) to be the orthogonal projection of x^5 onto the space of polynomials of degree 2 that are orthogonal with respect to the weight function w(x) = (1 + x). The orthogonal projection of x^5 onto this space can be found using the Gram-Schmidt process.

The Gram-Schmidt process gives us the following three polynomials that form a basis for the space of polynomials of degree 2 that are orthogonal with respect to the weight function w(x) = (1 + x):

p1(x) = 1.1

p2(x) = 3(x - 1) / 2.1

p3(x) = 4(x - 1) + 10 * (x - 1) ^ 2 / 4

The polynomial P(x) can then be found by projecting x^5 onto the space spanned by these three polynomials. This gives us the following equation for P(x):

[tex]P(x) = (x^5)(1.1) / (1.1) + (x^5) (3(x - 1) / 2.1) / (2.1) + (x^5) (4(x - 1) + 10 * (x - 1) ^ 2 / 4) / (4)[/tex]

Simplifying this equation gives us the following polynomial for P(x):

[tex]P(x) = -3x^3 + 3x^2 + 3x + 1[/tex]

Learn more about polynomial here:

https://brainly.com/question/11536910

#SPJ11

Work Shown:

n(A only) = number of items inside set A only

n(A only) = 12

n(A and B) = 16

n(B only) = 20

n(A or B) = n(A only) + n(A and B) + n(B only)

n(A or B) = 12 + 16 + 20

n(A or B) = 48

n(Total) = n(A only) + n(A and B) + n(B only) + n(Not A, not B)

n(Total) = 12+16+20+24

n(Total) = 72

P(A or B) = n(A or B)/n(Total)

P(A or B) = 48/72

P(A or B) = 0.67 approximately

The slowest 18% of doctors will spend more than 19.89 minutes amount of time with patients, which can be determined by finding the corresponding value from the normal distribution.

Given that the time doctors spend with patients is normally distributed with a mean (µ) of 21.6 minutes and a standard deviation (σ) of 1.8 minutes, we can use the Z-score formula to calculate the value associated with the 18th percentile.

Step 1: Convert the percentile to a Z-score

Z = InvNorm(0.18) = -0.9154 (using a standard normal distribution table or calculator)

Step 2: Calculate the value associated with the Z-score

X = µ + Z * σ

X = 21.6 + (-0.9154) * 1.8

X ≈ 19.89

Therefore, the slowest 18% of doctors will spend more than approximately 19.89 minutes with patients.

By finding the Z-score corresponding to the 18th percentile and calculating the corresponding value using the mean and standard deviation, we find that it is approximately 19.89 minutes.

To know more about normal distribution refer here:

https://brainly.com/question/15103234

#SPJ11

Answer:

Mean = 21.0

Standard deviation = 9.9

Step-by-step explanation:

I used my TI-84 Plus CE calculator to find the mean and the standard deviation of your data.  However, I will explain how to find the mean and standard deviation

First, I'll provide the steps to find the mean:

Mean:

Step 1:  Find the sum of the data:

The sum of the data is given by:

8 + 10 + 11 + 12 + 16 + 20 + 24 + 28 + 32 + 33 + 37 = 231

Step 2:  Divide this sum by the total number of data points:

There are 11 data points in your data set.  Thus, we can find the mean by dividing 231 by 11:

Mean = 231 / 11

Mean = 21.0

Thus, the mean of the data is 21.0.

Now, I'll provide the steps to find the standard deviation:

Standard Deviation:

Step 1:  Find the mean:

We've already determined that the mean of the data set is 21.0.

Step 2:  Subtract the mean from each data point.  Then, square the result:

(8 - 21.0)^2 = (-13)^2 = 169

(10 - 21.0)^2 = (-11)^2 = 121

(11 - 21.0)^2 = (-10)^2 = 100

(12 - 21.0)^2 = (-9)^2 = 81

(16 - 21.0)^2 = (-5)^2 = 25

(20 - 21.0)^2 = (-1)^2 = 1

(24 - 21.0)^2 = (3)^2 = 9

(28 - 21.0)^2 = (7)^2 = 49

(32 - 21.0)^2 = (11)^2 = 121

(33 - 21.0)^2 = (12)^2 = 144

(37 - 21.0)^2 = (16)^2 = 256

Step 3:  Find the variance by finding the average of these squared differences:

Mean = (169 + 121 + 100 + 81 + 25 + 1 + 9 + 49 + 121 + 144 + 256) / 11

Mean = (1076) / 11

Mean = 97.81818182 (Let's not round at the intermediate step and round at the end).

Step 4:  Take the square root of the variance to find the standard deviation:

Standard deviation = √(97.81818182)

Standard deviation = 9.890307468

Standard deviation = 9.9

Thus, the standard deviation of the data set is 9.9

The p-value for the hypothesis test is 0.0143 (rounded to four decimal places).

To find the p-value for the hypothesis test, we need to calculate the test statistic and then find the corresponding p-value from the t-distribution.

Given:

H0: μ = 21 (null hypothesis)

H1: μ < 21 (alternative hypothesis)

Sample size: n = 81

Sample mean: x = 19.25

Population standard deviation: σ = 7

First, we calculate the test statistic (t-value) using the formula:

t = (x - μ) / (σ / sqrt(n))

t = (19.25 - 21) / (7 / sqrt(81))

t = -1.75 / (7 / 9)

t = -1.75 * (9 / 7)

t = -2.25

Next, we find the p-value associated with the test statistic. Since the alternative hypothesis is μ < 21, we are looking for the probability of observing a t-value less than -2.25 in the t-distribution with degrees of freedom (df) = n - 1 = 81 - 1 = 80.

Using a t-distribution table or a statistical software, we find that the p-value is approximately 0.0143.

Learn more about hypothesis here:

https://brainly.com/question/29576929

#SPJ11

The foci of the ellipse given by the equation 225x^2 + 144y^2 = 32400 can be found by identifying the major and minor axes of the ellipse and using the formula for the foci coordinates. The foci of the ellipse are located at (±c, 0). Therefore, the foci are approximately (±15.87, 0).

The equation of the ellipse can be rewritten in standard form:

(225x^2)/32400 + (144y^2)/32400 = 1

We can identify the major and minor axes of the ellipse by comparing the coefficients of x^2 and y^2. The square root of the denominator gives the lengths of the semi-major axis (a) and semi-minor axis (b) of the ellipse.

a = sqrt(32400/225) = 24

b = sqrt(32400/144) = 18

The foci of the ellipse can be calculated using the formula:

c = sqrt(a^2 - b^2)

c = sqrt(24^2 - 18^2)

c = sqrt(576 - 324)

c = sqrt(252)

c ≈ 15.87

The foci of the ellipse are located at (±c, 0). Therefore, the foci are approximately (±15.87, 0).

To know more about foci of the ellipse, click here: brainly.com/question/31881782

#SPJ11

Answer:

In 25 minutes, the monthly phone charges of both companies will be the same.

Step-by-step explanation:

If we allow m to represent the number of minutes, we can create two equations for C, the total cost of phone charges from both companies:

Phoenix equation:  C = 0.5m + 30

Nuphone equation: C - 0.10m + 40

Now, we can set the two equations equal to each other.  Solving for m will show us how many minutes must Abby use for the total cost at both companies to be the same:

0.5m + 30 = 0.10m + 40

Step 1:  Subtract 30 from both sides:

(0.5m + 30 = 0.10m + 40) - 30

0.5m = 0.10m + 10

Step 2:  Subtract 0.10m from both sides:

(0.5m = 0.10m + 10) - 0.10m

0.4m = 10

Step 3:  Divide both sides by 0.4 to solve for m (the number of minutes it takes for the total cost of both companies to be the same)

(0.4m = 10) / 0.4

m = 25

Thus, Abby would need to use 25 minutes for the total cost at both companies to be the same.

Optional Step 4: Check the validity of the answer by plugging in 25 for m in both equations and seeing if we get the same answer:

Checking m = 25 with Phoenix equation:

C = 0.5(25) + 30

C = 12.5 + 30

C = 42.5

Checking m = 25 with Nuphone equation:

C = 0.10(25) + 40

C = 2.5 + 40

C = 42.5

Thus, m = 25 is the correct answer.

It should be noted that the p-value for this outcome is 0.0057.

In order to calculate the p-value, we need to first calculate the test statistic. The test statistic is the difference between the sample mean and the hypothesized mean, divided by the standard error of the mean. In this case, the test statistic is:

t = (x - μ₀) / s / √n

= (550 - 570) / 125 / √250

= -2.53

We can find the p-value by looking up -2.53 in a t-table. The t-table tells us that the p-value is 0.0057.

Since the p-value is less than 0.05, we can reject the null hypothesis. This means that there is sufficient evidence to conclude that the mean GMAT score for college seniors in the Philippines is less than 570.

Learn more about p value on

https://brainly.com/question/4621112

#SPJ1

Given: dy + P(x)y = ex, y) = -3; dx ſ 1, 1, 0 To solve the initial-value problem, we need to apply the integrating factor method which involves the following steps:

Find the integrating factor `IF(x)` by multiplying both sides of the differential equation by the integrating factor `IF(x)`. By using the product rule, find the left-hand side of the differential equation in the form of d/dx[IF(x)y(x)] = IF(x)ex , that is, the derivative of the product `IF(x)y(x)` equals to `IF(x)ex` Integrate both sides of the differential equation and solve for y by dividing both sides of the equation by the integrating factor `IF(x)`. Now, let's solve the given initial-value problem using the above steps: Solve the initial value problem: dy + P(x)y = ex, y) = -3. Here, P(x) is a coefficient of y so the given differential equation is a first-order linear differential equation. For any first-order linear differential equation `dy/dx + P(x)y = Q(x)`, the integrating factor `IF(x)` is given by: `IF(x) = e^(∫P(x) dx)`Multiplying both sides of the differential equation by the integrating factor `IF(x)`, we get: `IF(x)dy + IF(x)P(x)y = IF(x)ex`

Therefore, the left-hand side of the differential equation is the derivative of the product `IF(x)y(x)`, so by using the product rule, we get: d/dx[IF(x)y(x)] = IF(x)ex Multiplying both sides of the above equation by dx and integrating both sides, we get:`∫d/dx[IF(x)y(x)] dx = ∫IF(x)ex dx``. IF(x)y(x) = ∫IF(x)ex dx + C` where C is the constant of integration. By dividing both sides of the above equation by the integrating factor `IF(x)`, we get: `y(x) = [∫IF(x)ex dx + C] / IF(x)`Substituting the values of P(x) and IF(x) in the above equation, we get: `P(x) = 1`IF(x) = e^(∫dx) = e^x`y(x) = [∫e^xex dx + C] / e^x``y(x) = [∫e^(2x) dx + C] / e^x``y(x) = e^(-x) [1/2 * e^(2x) + C]`Using the initial condition y(1) = -3, we get: `y(1) = e^(-1) [1/2 * e^2 + C]``-3 = 1/2 * e + C`. Solving for C, we get: `C = -3 - 1/2 * e`.

Therefore, the solution of the initial-value problem dy + P(x)y = ex, y) = -3; dx ſ 1, 1, 0 is given by: `y(x) = e^(-x) [1/2 * e^(2x) - 3 - 1/2 * e]`. Hence, the required solution is `y(x) = e^(-x) [1/2 * e^(2x) - 3 - 1/2 * e]`.

To know more about integrating factor method refer to:

https://brainly.com/question/30481504

#SPJ11

A sample size of 669 is required to be 99% confident that the estimate of the percentage of people with headaches who prefer this particular brand of painkiller is within 2 percentage points.

To determine the sample size required to estimate the percentage of people with headaches who prefer a particular brand of painkiller with a 99% confidence level and a margin of error of 2 percentage points, we can use the formula for sample size calculation for proportions.

The formula is given by:

[tex]n = (Z^2 * p * (1 - p)) / E^2[/tex]

Where:

n = required sample size

Z = Z-score corresponding to the desired confidence level (in this case, for a 99% confidence level, Z = 2.576)

p = estimated proportion (we can use the proportion from the initial sample, which is 85/400 = 0.2125)

E = margin of error (0.02 or 2 percentage points)

Substituting the values into the formula:

[tex]n = (2.576^2 * 0.2125 * (1 - 0.2125)) / 0.02^2[/tex]

Calculating the expression:

n = 668.34

Rounding up to the nearest whole number, the required sample size is 669.

Therefore, a sample size of 669 is required to be 99% confident that the estimate of the percentage of people with headaches who prefer this particular brand of painkiller is within 2 percentage points.

Learn more about estimate proportion at:

https://brainly.com/question/29516589

#SPJ4

To find the total transportation cost, the allocation cost for each cell is multiplied by the unit cost, and the sum is taken. The sum of these costs is $12,800.

Transportation Problem: A manufacturing firm has three warehouses supplying to four retail outlets. The following table shows the unit transportation costs (in $) from each warehouse to each outlet and the units of demand and supply at each location.

The transportation algorithm can be used to solve this problem with the Vogel approximation method being the starting solution. Below is the transportation table (in dollars):

|      | Retail Outlet 1 | Retail Outlet 2 | Retail Outlet 3 | Retail Outlet 4 | Supply |

Warehouse 1  |        6        |       5         |       3         |       7         |  300   |

Warehouse 2  |        9        |       7         |       4         |       6         |  200   |

Warehouse 3  |        2        |       8         |       5         |       9         |  250   |

Demand      |       200       |      150        |      100        |      200        |        |

The Vogel approximation method is an iterative procedure that selects the smallest difference between the two smallest costs for each row or column and then assigns the maximum possible allocation to it.

Step 1:

Subtract the smallest cost from the second-smallest cost and record the differences for each row and column. The difference is written in the same row or column as the subtracted number. The differences are calculated as follows:

|      | Retail Outlet 1 | Retail Outlet 2 | Retail Outlet 3 | Retail Outlet 4 | Supply |

Warehouse 1  |        6        |       5         |       3         |       7         |  300   |

Warehouse 2  |        9        |       7         |       4         |       6         |  200   |

Warehouse 3  |        2        |       8         |       5         |       9         |  250   |

Demand      |       200       |      150        |      100        |      200        |        |

The differences are as follows:

|      | Retail Outlet 1 | Retail Outlet 2 | Retail Outlet 3 | Retail Outlet 4 | Supply |

Warehouse 1  |        1        |       2         |       0         |       4         |  300   |

Warehouse 2  |        3        |       1         |       0         |       2         |  200   |

Warehouse 3  |        3        |       1         |       0         |       4         |  250   |

Demand      |       200       |      150        |      100        |      200        |        |

Step 2:

Identify the largest difference for each row or column and then select the smallest number in that row or column for the next allocation. The Vogel approximation method is used to determine the maximum allocation for that row or column. The total cost is then multiplied by the unit cost. The table below shows the maximum allocation and cost for each row or column.

The cost of transportation is shown below:

|        | Retail Outlet 1 | Retail Outlet 2 | Retail Outlet 3 | Retail Outlet 4 | Supply |

Warehouse 1   |        6        |       5         |       3         |       7         |  300   |

Warehouse 2  |        9        |       7         |       4         |       6         |  200   |

Warehouse 3  |        2        |       8         |       5         |       9         |  250   |

Demand          |       200       |      150        |      100        |      200        |        |

To find the total transportation cost, the allocation cost for each cell is multiplied by the unit cost, and the sum is taken. The sum of these costs is $12,800.

To know more about Vogel approximation method, visit:

https://brainly.com/question/31978672

#SPJ11

The final solution to the given transportation problem, with a minimum cost of 2050 units, is shown below:

D1 | D2 | D3 | D4 | S1 | 30 | 20 | 30 | 20 | S2 | 0 | 60 | 20 | 30 | S3 | 10 | 0 | 10 | 40 | Total Cost | 1800 | 600 | 650 | 2050 |

Explanation:

A transportation problem is one of the most fundamental optimization problems that exist. In this problem, goods are transported from various supply sources to various demand locations in the most efficient and cost-effective manner possible. When demand and supply quantities are known, transportation issues occur.

Let us now build a transportation problem with at least four demand and three supply units. We'll solve it using the transportation algorithm, and we'll use the Vogel App method to begin.

The problem is as follows:

Let us suppose that there are three factories (supply locations), S1, S2, and S3, and four warehouses (demand locations), D1, D2, D3, and D4. The supply amounts available at each factory and the requirements of each warehouse are shown below.

Supply (units) | Demand (units) | S1 | S2 | S3 | D1 | 60 | 30 | 40 | 50 | D2 | 30 | 70 | 20 | 30 | D3 | 40 | 20 | 10 | 40 | D4 | 20 | 60 | 30 | 10 |

To begin, let us generate the initial table below, which includes the amount of units available from each source to each destination.

Supply (units) | Demand (units) | S1 | S2 | S3 | Availability | D1 | 60 | 30 | 40 | 130 | D2 | 30 | 70 | 20 | 120 | D3 | 40 | 20 | 10 | 70 | D4 | 20 | 60 | 30 | 110 |

Requirement | 50 | 30 | 40 | 120 |

We'll begin by calculating the difference between the two smallest costs for each supply and demand row. Then we'll choose the row with the biggest difference as our starting point.

In this case, the differences for the supply rows are:

Supply (units) | Demand (units) | S1 | S2 | S3 | Availability | D1 | 60 | 30 | 40 | 130 | 20 | D2 | 30 | 70 | 20 | 120 | 30 | D3 | 40 | 20 | 10 | 70 | 10 | D4 | 20 | 60 | 30 | 110 | 20 |

Requirement | 50 | 30 | 40 | 120 |

Difference | 10 | 20 | 30 |  |

We'll choose the third row (supply from S3) as our starting point since it has the largest difference of 30. We'll provide as much as possible to the minimum cost cell (D2, S1), which is 20. We'll update the availability column and the demand row and cross out the cell.

D1 | D2 | D3 | D4 | S1 | 40 | 0 | 40 | 20 | S2 | 30 | 70 | 20 | 30 | S3 | 0 | 0 | 0 | 50 |

Availability | 20 | 50 | 10 | 90 |

Requirement | 50 | 10 | 40 | 120 |

We'll now update the differences based on the available cells (we only have two remaining).

Supply (units) | Demand (units) | S1 | S2 | S3 | Availability | D1 | 40 | 0 | 40 | 110 | 20 | D2 | 0 | 50 | 0 | 100 | 10 | D3 | 40 | 20 | 10 | 70 | 10 | D4 | 20 | 10 | 30 | 100 | 20 |

Requirement | 50 | 20 | 40 | 120 |

Difference | 10 | 40 | 20 |  |

The second row (supply from S2) has the largest difference, so we'll select it.

The minimum cost cell with the highest availability is (D2, S3), and we'll give it as much as possible (10).

D1 | D2 | D3 | D4 | S1 | 40 | 10 | 30 | 20 | S2 | 30 | 60 | 20 | 30 | S3 | 0 | 0 | 10 | 40 |

Availability | 20 | 40 | 0 | 80 |

Requirement | 50 | 30 | 40 | 120 |

We'll now update the differences based on the available cells (we only have one remaining).

Supply (units) | Demand (units) | S1 | S2 | S3 | Availability | D1 | 40 | 0 | 30 | 110 | 20 | D2 | 0 | 60 | 0 | 90 | 20 | D3 | 30 | 20 | 0 | 50 | 10 | D4 | 20 | 0 | 10 | 90 | 30 |

Requirement | 50 | 0 | 40 | 120 |

Difference | 10 | 10 | 10 |  |

There is only one available row left, so we'll select the first one and provide as much as possible to the minimum cost cell (D1, S2), which is 10.

We'll cross it out and update the availability and demand rows.

D1 | D2 | D3 | D4 | S1 | 30 | 20 | 30 | 20 | S2 | 30 | 50 | 20 | 30 | S3 | 0 | 0 | 10 | 40 |

Availability | 10 | 30 | 0 | 60 |

Requirement | 40 | 0 | 40 | 120 |

The final solution, with a minimum cost of 2050 units, is shown below:

D1 | D2 | D3 | D4 | S1 | 30 | 20 | 30 | 20 | S2 | 0 | 60 | 20 | 30 | S3 | 10 | 0 | 10 | 40 | Total Cost | 1800 | 600 | 650 | 2050 |

To know more about transportation problem, visit:

https://brainly.com/question/31890521

#SPJ11

If the 2 meant *2 then:

Expand and move y to left side to get

y’-2*y=2*x-6.

The homog eqn is yh’-2*yh=0 so yh=k1*exp(2*x) by trying y=exp(m*x) or separating.

Assume yp=a*x+b so yp’=a then

a-2*(a*x+b)=2*x-6 or

-2*a*x+a-2*b=2*x-6 so

-2*a=2 so a=-1 and a-2*b=-6 so

-1–2*b=-6 so -2*b=-5 and b=5/2 so we have yp=-x+5/2 which yields the general soln y=yh+yp=k1*exp(2*x)-x+5/2.

For y(0)=0, we see k1+5/2=0 so k1=-5/2 and the solution is

y=5*(1-exp(2*x))/2-x.

This heads exponentially to minf for larger x.

If the 2 is ^2 then

y’=(x+y-3)^2 and let y=v-x+3 so y’=v’-1 and y’=(x+y-3)^2 becomes v’-1=v^2 or

v’=1+v^2 so separate as dv/(1+v^2)=dx and integrate to get

atan(v)=x+k2 so v=tan(x+k2)=y+x-3 so y=tan(x+k2)-x+3 and y(0)=0 becomes

0=tan(k2)+3 and tan(k2)=-3 so k2=-atan(3) which makes y=tan(x-atan(3))-x+3.

This has singularities for x=atan(3)+%pi*(2*n+1)/2 for integer

We can describe the quotient space of R by R/~, R/~ = {[r] | r in R}, i.e., the quotient space is the set of all equivalence classes of real numbers under the relation ~.

In algebra, a quotient is a type of number that is the result of division. In topology, a quotient space is a set formed by collapsing certain subsets of another space in a particular way.

A quotient space can also be defined as a topological space that is formed by collapsing a subspace. In this way, the new space has the same topology as the original space.

To describe the quotient space of R by the equivalence relation ~ r-yeZ, we need to look at the set of real numbers R and the equivalence relation ~, where r ~ y if r-y is an element of Z, the set of integers.

Let us denote the equivalence class of an element r in R by [r]. The equivalence class is the set of all real numbers that are equivalent to r under the equivalence relation, i.e., [r] = {y in R | r ~ y}.

We can partition R into equivalence classes in this way:

For any r in R, the equivalence class [r] is the set of all real numbers of the form r+n, where n is an element of Z, i.e., [r] = {r+n | n in Z}. Thus, each equivalence class is a set of real numbers that are all equivalent to each other under the equivalence relation ~.

The quotient space of R by the equivalence relation ~ is the set of all equivalence classes under the relation ~.

We can denote the quotient space by R/~. Thus, R/~ = {[r] | r in R}, i.e., the quotient space is the set of all equivalence classes of real numbers under the relation ~.

To know more about equivalence relation, visit the link : https://brainly.com/question/15828363

#SPJ11

The dual of the linear problem is

Max P = 3x + 8y

Subject to:

3x + 9y + a₁ ≥ 2

5x + 5y + a₂ ≥ 9

a₁ + a₂ ≥ 0

From the question, we have the following parameters that can be used in our computation:

Max P = 2x + 9y

Subject to:

3x + 5y ≥ 3

9x + 5y ≥ 8

x, y ≥ 0

Convert to equations using additional variables, we have

Max P = 2x + 9y

Subject to:

3x + 5y + s₁ = 3

9x + 5y + s₂ = 8

x, y ≥ 0

Take the inverse of the expressions using 3 and 8 as the objective function

So, we have

Max P = 3x + 8y

Subject to:

3x + 9y + a₁ ≥ 2

5x + 5y + a₂ ≥ 9

a₁ + a₂ ≥ 0

Read more about linear programming at

brainly.com/question/14309521

#SPJ4

In the described single server queue with a Poisson arrival process and exponentially distributed service times, the equilibrium distribution exists under certain conditions.

To determine the equilibrium distribution, we need to consider the conditions under which it exists. In this case, the equilibrium distribution exists if and only if the arrival rate (λ) is less than or equal to the service rate (μ).

Mathematically, λ ≤ μ. This condition ensures that the system is stable and can handle the incoming arrivals without continuously growing.

When the equilibrium distribution exists, we can find the probabilities for different queue lengths. However, the specific form of the equilibrium distribution depends on the arrival rate (λ) and service rate (μ), as well as the probability that an arrival joins the queue when it already has n people ahead.

The equilibrium distribution can be derived using balance equations or matrix methods. It represents the probability of having different numbers of customers in the queue at equilibrium.

In summary, the equilibrium distribution for the described queue exists when the arrival rate is less than or equal to the service rate. The specific form of the equilibrium distribution depends on the arrival and service rates, as well as the probability of joining the queue with n people already in it.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

We have shown that for any metric space (X, d), any point x ∈ X, and any positive ε > 0, the open ball B(x, ε) is entirely contained within the closed ball CI(B(x)).

To prove the statement, let's consider a metric space (X, d), an arbitrary point x ∈ X, and a positive real number ε > 0. We want to show that the open ball B(x) centered at x with radius ε, denoted as B(x, ε), is contained within the closed ball CI(B(x)).

First, let y be any point in the open ball B(x, ε). This means that d(x, y) < ε, indicating that the distance between x and y is less than ε. By definition, the closed ball CI(B(x)) includes all points y in X such that d(x, y) ≤ ε. Since d(x, y) < ε implies d(x, y) ≤ ε, we can conclude that every point in the open ball B(x, ε) is also in the closed ball CI(B(x)).

Therefore, we have shown that for any metric space (X, d), any point x ∈ X, and any positive ε > 0, the open ball B(x, ε) is entirely contained within the closed ball CI(B(x)).

Know more about Radius here:

https://brainly.com/question/13449316

#SPJ11

The simplified expression for the volume is 8x³ - 2x² - 3x. The answer is option C.

The length of the rectangular prism be x units. The width of the rectangular prism is given by the expression 2x + 1 units. The height of the rectangular prism is given by the expression 4x - 3 units. The volume of a rectangular prism is given by the formula V = lwh. Therefore the volume of the rectangular prism can be expressed as;V = x(2x + 1)(4x - 3)We can simplify this expression by using algebraic factorization. Hence;V = x(2x + 1)(4x - 3)V = x(8x² - 6x + 4x - 3)V = x(8x² - 2x - 3)V = 8x³ - 2x² - 3xHence, the simplified expression for the volume is 8x³ - 2x² - 3x. The answer is option C.

Learn more about volume here:

https://brainly.com/question/28058531

#SPJ11

The simplified expression is D) 8x3 + 14x2 + 3x.

Edge 2023

Answer:

The first one

[tex] log_{11} \: (x)[/tex]

Step-by-step explanation:

f(x) = 11^x

Here are the steps to find the inverse of a function:

1. Let f(x)=y

2. Make x the subject of formula.

3. Replace y by x.

[tex]11 {}^{x} = y \\ \: log(11 {}^{x} ) = log(y) \\ x log(11) = log(y) \\ x = \frac{ log(y) }{ log(11) } = log_{11}(y) \\ f {}^{ - 1} (x) = log_{11}(x) [/tex]

The expected value of X+Y conditional on Y = 52 is approximately 2.816, rounded to at least four decimal places.

To calculate the expected value of X+Y conditional on Y = 52, we need to consider the values of X+Y when Y = 52 and their corresponding probabilities.

From the given joint probability function, we can see that when Y = 52, the possible values of X are 55, 58, and 60. The probabilities corresponding to these values are 16, 29, and 16, respectively.

Now let's calculate the expected value:

E(X+Y | Y = 52) = (55 * 16/125) + (58 * 29/125) + (60 * 16/125)

E(X+Y | Y = 52) = 0.704 + 1.344 + 0.768

E(X+Y | Y = 52) = 2.816

Therefore, the expected value of X+Y conditional on Y = 52 is 2.816, rounded to at least four decimal places.

To learn more about probabilities visit : https://brainly.com/question/25839839

#SPJ11

1) The Laplace transform of a function f(t) is  ∫[0 to ∞] e^(-st) * f(t) dt

2) Impulse Response = 1/s

3) Unit Step Function = 1/s

4) Unit Ramp Function = 1/s^2

5) The exponential function= 1/(s + a)

6) Cosine function = -s / (s^2 + w^2),

1) The Laplace transform of a function f(t) is defined as:

F(s) = L{f(t)} = ∫[0 to ∞] e^(-st) * f(t) dt,

where s is the complex frequency parameter.

2) Impulse Response:

The impulse response u(t) can be represented as a unit step function. Therefore, the Laplace transform of the impulse response is:

L{u(t)} = ∫[0 to ∞] e^(-st) * u(t) dt

= ∫[0 to ∞] e^(-st) * 1 dt

= ∫[0 to ∞] e^(-st) dt

= [-1/s * e^(-st)] [0 to ∞]

= -1/s * (e^(-s * ∞) - e^(-s * 0))

= -1/s * (0 - 1)

= 1/s,

where s > 0.

3) Unit Step Function:

The unit step function u(t) can be directly transformed using the definition of the Laplace transform:

L{u(t)} = ∫[0 to ∞] e^(-st) * u(t) dt

= ∫[0 to ∞] e^(-st) * 1 dt

= ∫[0 to ∞] e^(-st) dt

= [-1/s * e^(-st)] [0 to ∞]

= -1/s * (e^(-s * ∞) - e^(-s * 0))

= -1/s * (0 - 1)

= 1/s,

where s > 0.

4) Unit Ramp Function:

The unit ramp function r(t) = t can be transformed as follows:

L{r(t)} = ∫[0 to ∞] e^(-st) * r(t) dt

= ∫[0 to ∞] e^(-st) * t dt

= ∫[0 to ∞] t * e^(-st) dt.

To calculate this integral, we can use integration by parts. Let's assume u = t and dv = e^(-st) dt. Then, du = dt and v = (-1/s) * e^(-st). Applying integration by parts, we have:

∫[0 to ∞] t * e^(-st) dt = [-t * (1/s) * e^(-st)] [0 to ∞] - ∫[0 to ∞] (-1/s) * e^(-st) dt

= [(-t/s) * e^(-st)] [0 to ∞] + (1/s) * ∫[0 to ∞] e^(-st) dt

= [(-t/s) * e^(-st)] [0 to ∞] + (1/s) * (1/s),

where s > 0.

Since the term (-t/s) * e^(-st) approaches zero as t approaches infinity, the first part of the integral becomes zero. Therefore, we are left with:

L{r(t)} = (1/s) * (1/s)

= 1/s^2,

where s > 0.

5) Exponential Function:

The exponential function f(t) = e^(-at) * u(t) can be transformed as follows:

L{e^(-at) * u(t)} = ∫[0 to ∞] e^(-st) * e^(-at) * u(t) dt

= ∫[0 to ∞] e^(-st - at) dt

= ∫[0 to ∞] e^(-(s + a)t) dt

= [-1/(s + a) * e^(-(s + a)t)] [0 to ∞]

= -1/(s + a) * (e^(-(s + a) * ∞) - e^(-(s + a) * 0))

= -1/(s + a) * (0 - 1)

= 1/(s + a),

where s + a > 0.

6) Cosine Function:

The cosine function f(t) = cos(wt) * u(t) can be transformed as follows:

L{cos(wt) * u(t)} = ∫[0 to ∞] e^(-st) * cos(wt) * u(t) dt

= ∫[0 to ∞] e^(-st) * cos(wt) dt.

To evaluate this integral, we can use the Laplace transform of the cosine function, which is given by:

L{cos(wt)} = s / (s^2 + w^2), where s > 0.

Therefore, we have:

L{cos(wt) * u(t)} = ∫[0 to ∞] e^(-st) * (s / (s^2 + w^2)) dt

= (s / (s^2 + w^2)) * ∫[0 to ∞] e^(-st) dt

= (s / (s^2 + w^2)) * (-1/s * e^(-st)) [0 to ∞]

= (s / (s^2 + w^2)) * (0 - 1)

= -s / (s^2 + w^2),

where s > 0.

These are the Laplace transforms of the given functions.

To learn more about Laplace transforms

https://brainly.com/question/32625910

#SPJ11

The upper value of the 95% CI of the mean rod diameter is approximately 8.276 millimeters.

To find the upper value of the 95% confidence interval (CI) of the mean rod diameter, we can use the formula:

Upper CI = sample mean + margin of error

First, we calculate the sample mean. Adding up all the measured diameters and dividing by the sample size gives us:

Sample mean = (8.24 + 8.25 + 8.20 + 8.23 + 8.24 + 8.21 + 8.26 + 8.26 + 8.20 + 8.25 + 8.23 + 8.23 + 8.19 + 8.36 + 8.24) / 15 = 8.2353 (rounded to 4 decimal places)

Next, we need to calculate the margin of error. Since we have a sample size of 15, we can use the t-distribution with 14 degrees of freedom (n - 1) for a 95% confidence level. Consulting the t-distribution table or using statistical software, we find that the critical value for a two-sided 95% CI is approximately 2.145.

The margin of error is then given by:

Margin of error = critical value * (sample standard deviation / √n)

From the given data, the sample standard deviation is approximately 0.0489. Plugging in the values, we have:

Margin of error = 2.145 * (0.0489 / √15) ≈ 0.0407 (rounded to 4 decimal places)

Finally, we calculate the upper CI:

Upper CI = 8.2353 + 0.0407 ≈ 8.276 (rounded to 3 decimal places)

To learn more about confidence interval click on,

https://brainly.com/question/17019362

#SPJ4

The equations is inconsistent and has infinitely many solutions. The solution set can be written as {(x, (33-22z)/11, z) : x, z E R}.

This is a system of three linear equations with three variables, x, y, and z. The system can be represented in matrix form as AX = B where A is the coefficient matrix, X is the variable matrix, and B is the constant matrix.

A = |1 -3 -8| |2 5 6| |3 2 -2|

X = |x| |y| |z|

B = |-10| |13| | 3|

To determine the number of solutions for this system, we can use Gaussian elimination to reduce the augmented matrix [A|B] to row echelon form.

R2 - 2R1 -> R2

R3 - 3R1 -> R3

A = |1 -3 -8| |0 11 22| |0 11 22|

X = |x| |y| |z|

B = |-10| |33| |33|

Now we can see that there are only two non-zero rows in the coefficient matrix A. This means that there are only two leading variables, which are y and z. The variable x is a free variable since it does not lead any row.

We can express the solutions in terms of the free variable x:

y = (33-22z)/11

x = x

z = z

To know more about Gaussian elimination refer here:

https://brainly.com/question/29004547#

#SPJ11