A beaker contains 0.125 L of a 3.00 M solution. If the volume goes up to 0.325 L, what is the new molarity?

Answer:

m = 49.8 g

Explanation:

Hello there!

In this case, for this calorimetry processes we can define the involved heat in terms of mass, specific heat and temperature as shown below:

[tex]Q=mC\Delta T[/tex]

Thus, given the heat, final and initial temperature and specific heat of water (4.184), the mass of water can be computed as shown below:

[tex]m=\frac{Q}{C\Delta T}\\\\m=\frac{12500J}{4.184\frac{J}{g\°C}(75\°C-15.0\°C)} \\\\m=49.8g[/tex]

Best regards!

Answer:

C is the correct answer.

Explanation:

We can eliminate some answers immediately:

A is incorrect because nitrogen and hydrogen do not change their identity, they just combine into a new molecule that contains them. Notice how there are 2 nitrogen atoms and 6 hydrogen atoms on both sides of the equation.

B is incorrect because the first law of thermodynamics tells us that matter and energy will always be conserved, so the mass of the products must be equal to the mass of the reactants, not less than the mass of the reactants.

C is correct because balanced chemical equations help chemists predict how much product will form from certain amounts of reactants.

D is incorrect because this equation is showing the exact opposite. Molecular hydrogen and nitrogen can combine stoichiometrically to form ammonia.

Answer:

[tex]V_2=0.153L[/tex]

Explanation:

Hey there!

In this case, according to the equation for dilution process, in which the moles of the solute remain the same after the addition of additional solvent:

[tex]M_1V_1=M_2V_2[/tex]

Thus, by solving for the new volume, V2,  of the base, NaOH, we can obtain:

[tex]V_2=\frac{M_1V_1}{M_2}=\frac{0.09L*0.850M}{0.500M}\\\\V_2=0.153L[/tex]

Best regards!

I think it's D

Explanation:

if you think abt it strength training means weights and stuff so I dont think it increases flexibility. it's that or letter C

Answer:

[tex]n_{Cl_2}=0.3molCl_2[/tex]

Explanation:

Hello there!

In this case, according to the given chemical reaction whereas the sodium chloride is in a 2:1 mole ratio with chlorine, the required moles of the later are computed as shown below:

[tex]n_{Cl_2}=0.6molNaCl*\frac{1molCl_2}{2molNaCl}[/tex]

So we cancel out the moles of NaCl to obtain:

[tex]n_{Cl_2}=0.3molCl_2[/tex]

Best regards!

Answer:

0.67 cm³

Explanation:

We can solve this problem by using the definition of density:

We can rearrange the equation and isolate volume:

As we are given both the mass and the density, we can now calculate the volume:

Answer:

6.37

Explanation:

Answer:

high ph

Explanation:

if you have high conc of H+ ph is low therefore acidic but if vice versa basic

high ph

Answer:

a

Explanation:

Answer:

I think

Explanation:

N for nitrogen

P for phosphorus

Br for bromine

K for potassium

Mg for magnesium

Answer:

[tex]1 \: litre \: solution \: contains \: 3 \: moles \\ 5 \: litres \: will \: contain \: \frac{(5 \times 3)}{1} \: moles \\ = 15 \: moles \: of \: solute[/tex]

Answer:

2.5 times

Explanation:

Jupiter's mass is 2.5 times that of all the other planets in the Solar System combined—this is so massive that its barycenter with the Sun lies beyond the Sun's surface at 1.068 solar radii from the Sun's center.

Answer:

Explanation:

The molarity of a solution when given the number of moles the substance and it's volume can be found by using the formula

[tex]c = \frac{n}{v} \\ [/tex]

n is the number of moles

v is the volume in L

We have

[tex]c = \frac{0.4}{9.79} \\ = 0.04058...[/tex]

We have the final answer as

Hope this helps you

Answer:

4.5L of gas are produced

Explanation:

Based on the reaction:

Zn + H2SO4 → ZnSO4 + H2(g)

Where 1 mole of Zn reacts with 1 mole of sulfuric acid to produce 1 mole of H2, the gas

To solve this question we must find the moles of each reactant in order to find limiting reactant and, thus, the moles of H2 produced. Then using PV=nRT we can find the volume of the gas:

Moles Zn -Molar mass: 65.38g/mol-

13g * (1mol / 65.38g) = 0.20 moles Zn

Moles H2SO4 -Molar mass: 98g/mol-

400g * 10% = 40g H2SO4 * (1mol / 98g) = 0.41 moles H2SO4

As the ratio of the reaction is 1:1, the limiting reactant is Zn and the moles produced of H2 are 0.20 moles

Using PV = nRT; V = nRT/ P

Where V is the volume of the gas

n are the moles = 0.20 moles

R is gas constant = 0.082atmL/molK

T is absolute temperature = 273.15K at STP

P is pressure = 1atm at STP

V = 0.20mol*0.082atmL/molK*273.15K / 1atm

V = 4.5L of gas are produced

Answer:

Volume of air is [tex]60[/tex] cubic meter

Mass of air is [tex]72.246[/tex] Kilogram

Explanation:

As air occupies the volume of the container in which it is kept. The volume of air here in this case will be equal to the volume of the room.

Volume of the room = length * breadth * height

Volume of the room = [tex]4*5*3 = 60[/tex] cubic meter.

Volume of air is also [tex]60[/tex] cubic meter.

Density of air at 20 degrees C [tex]= 1.2041[/tex] kg/cu.m

Mass of air

Volume * density

[tex]60 * 1.2041 = 72.246[/tex] kilogram

Volume of air is [tex]60[/tex] cubic meter

Mass of air is [tex]72.246[/tex] Kilogram

Answer:

χsolvent = 1.0000 - 0.1000 = 0.9000

Use Raoult's Law:

Psolution = (χsolvent) (P°solvent)

x = (0.900) (25.756)

x = 23.18 mmHg (to four sig figs)

The vapor pressure of an aqueous solution is  x = 23.18 mmHg (to four sig figs)

χsolvent = 1.0000 - 0.1000 = 0.9000

Use Raoult's Law:

P solution = (χsolvent) (P°solvent)

x = (0.900) (25.756)

x = 23.18 mmHg (to four sig figs)

An aqueous answer is one in which the solvent is liquid water. that is, solute (dissolved) ions and molecules are surrounded by water molecules and integrated into the network of bonds within the water. The dissolved species then spread in the course of the water.

A solution wherein water is the solvent is called an aqueous solution. although water is an exceptional solvent, now not the whole thing dissolves comfortably in the water.

Aqueous' in a chemical equation suggests that the cloth dispersed in water (an answer in water). As an example, when we pour sodium hydroxide answer into dilute hydrochloric acid, we get an aqueous solution of sodium chloride. The liquid is used to signify the formation of liquid materials in response.

Learn more about the aqueous solution here: https://brainly.com/question/19587902

#SPJ2

Answer:

Explanation:

[tex]c = f \lambda[/tex]

where c = speed of light (3x10^8m/s)

f = frequency

[tex]\lambda[/tex] = wavelength.

We can solve that the frequency is (3x10^8)/(420 x 10^-9) = 7.14x10^14 Hz

Also, E  = hf where h = 6.62x10^-34.

So the energy is (6.62x10^-34) x  (7.14x10^14) = 4.73x10^-19 J.

Hope this helps and tell me if I made any mistakes.

Answer:

36.8 L

Explanation:

We'll begin by converting 80 °C to Kelvin temperature. This can be obtained as follow:

T(K) = T(°C) + 273

T(°C) = 80 °C

T(K) = 80 + 273

T(K) = 353 K

Finally, we shall determine the volume occupied by the helium gas. This can be obtained as follow:

Number of mole (n) = 1.27 moles

Temperature (T) = 353 K

Pressure (P) = 1 atm

Gas constant (R) = 0.0821 atm.L/Kmol

Volume (V) =?

PV = nRT

1 × V = 1.27 × 0.0821 × 353

V = 36.8 L

Thus, the volume occupied by the helium gas is 36.8 L

Answer:

https://sensorex.com/ph-calculator/

Explanation:

go to this link and then scroll down a little bit and then you'll find the answer

According to molar concentration, the molarity of the solution is 2.55 M.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.

Substituting values in the given second formula, molarity=0.0255/0.010=2.55 M.

Thus, the molar concentration of the solution is 2.55 M.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ2

Answer:

[tex]n_{NH_3}^{produced}=6.3molNH_3[/tex]

Explanation:

Hello there!

In this case, according to the given chemical reaction, it is possible for us to use the 1:2 mole ratio of nitrogen to ammonia to calculate the moles of the latter that are produced when reacting 3.15 moles of the former with hydrogen as shown below:

[tex]n_{NH_3}^{produced}=3.15molN_2*\frac{2molNH_3}{1molN_2}[/tex]

Thus, by solving the equation we obtain:

[tex]n_{NH_3}^{produced}=6.3molNH_3[/tex]

Best regards!

Answer:

Why aren't diamonds found evenly distributed on Earth? Diamonds are only formed under specific conditions that involve geological processes, such as volcanic activities and plate movements. Since these conditions and processes only take place in certain areas, you can only find diamonds in these special places.

Explanation:

Answer:

A.................. I think the answer

Answer:

B

Explanation:

to find the new rate when the concentration of reactants changes

Answer:

A its a step by step equation the answer is A

Answer:

514.8 grams of H₂O would be produced.

Explanation:

The balanced reaction is:

CH₄ + 2 O₂ → CO₂ + 2 H₂O

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles participate in the reaction:

Being the molar mass of each compound:

By stoichiometry, the following amounts of mass participate in the reaction:

You can apply the following rule of three: if 1 mole of methane produces 36 grams of water, 14.3 moles of methane produces how much mass of water?

[tex]mass of water=\frac{14.3 moles of methane*36 grams of water}{1 mole of methane}[/tex]

mass of water= 514.8 grams

514.8 grams of H₂O would be produced.

Answer:

pH = 1.62

Explanation:

We can solve this problem using Henderson-Hasselbach's equation:

Where

Now we convert 132.8 g of NaC₇H₅O₂ into moles, using its molar mass:

Then we calculate [NaC₇H₅O₂]:

Now we can proceed to calculate the pH of the solution:

Answer:

The coefficient of Fe₂O₃ is 1

Explanation:

__Fe₂O₃ + 3H₂ —> 2Fe + 3H₂O

To know the correct coefficient of Fe₂O₃, we shall balanced the equation. This can be obtained as follow:

Fe₂O₃ + H₂ —> Fe + H₂O

There are 2 atoms of Fe on the left side and 1 atom on right side. It can be balance by writing 2 before Fe as shown below:

Fe₂O₃ + H₂ —> 2Fe + H₂O

There are 3 atoms of O on the left side and 1 atom on the right side. It can be balance by writing 3 before H₂O as shown below:

Fe₂O₃ + H₂ —> 2Fe + 3H₂O

There are 2 atoms of H on the left side and 6 atoms on the right side. It can be balance by writing 3 before H₂ as shown below:

Fe₂O₃ + 3H₂ —> 2Fe + 3H₂O

Now, the equation is balanced.

Thus, the coefficient of Fe₂O₃ is 1

Answer:

= -4a+22b

Explanation:

i hope this helps :)

Answer:

12a-16a =-4a

26b -4b =22b

the final answer is-4a +22b