A bicycle has a momentum of 36 kg•m/s and a velocity of 4 m/s. What is the mass of the bicycle?

Answer:

True. Diffusion and osmosis are forms of passive transport.

Explanation:

In diffusion, particles move from an area of higher concentration to one of lower concentration until equilibrium is reached.

In osmosis, a semipermeable membrane is present, so only the solvent molecules are free to move to equalize concentration.

Answer:

100% true

Explanation:

Simple diffusion and osmosis are both forms of passive transport and require none of the cell's ATP energy. Example of diffusion: Gas Exchange A biological example of diffusion is the gas exchange that occurs during respiration within the human body.

Answer:

  T₀ = 2π [tex]\sqrt{\frac{m}{k} }[/tex]           T = [tex]\sqrt{\frac{5}{6} }[/tex] T₀

Explanation:

When the block is oscillating it forms a simple harmonic motion, which in the case of a spring and a mass has an angular velocity

        w = [tex]\sqrt{k/m}[/tex]

To apply this formula to our case, let's look for the equivalent constant of the springs.

Let's start with the springs in parallels.

* the three springs in the upper part, when stretched, lengthen the same distance, therefore the total force is

       F_total = F₁ + F₂ + F₃

the springs fulfill Hooke's law and indicate that the spring constant is the same for all three,

       F_total = - k x - k x - kx = -3k x

therefore the equivalent constant for the combination of the springs at the top is

      k₁ = 3 k

* the two springs at the bottom

following the same reasoning the force at the bottom is

        F_total2 = - 2 k x

the equivalent constant at the bottom is

         k₂ = 2 k

now let's work the two springs are equivalent that are in series

the top spring is stretched by an amount x₁ and the bottom spring is stretched x₂

            x₂ = x -x₁

            x₂ + x₁ = x

if we consider that the springs have no masses we can use Hooke's law

            [tex]-\frac{F_{1} }{k_{1} } - \frac{F_{2}}{k_{2} } = \frac{F}{k_{eq} }[/tex]

therefore the equivalent constant is the series combination is

             [tex]\frac{1}{k_{eq} } = \frac{1}{k_{1} } + \frac{1}{k_{2} }[/tex]

we substitute the values

             \frac{1}{k_{eq} }  = \frac{1}{3k } + \frac{1}{2k }  

             \frac{1}{k_{eq} }  = \frac{5}{6k} }  

              k_eq = [tex]\frac{6k}{5}[/tex]  

therefore the angular velocity is

             w = [tex]\sqrt{\frac{6k}{5m} }[/tex]  

angular velocity, frequency, and period are related

           w = 2π f = 2π / T

           T = 2π / w

            T = 2π [tex]\sqrt{\frac{5m}{6k} }[/tex]

           T₀ = 2π [tex]\sqrt{\frac{m}{k} }[/tex]

           T = [tex]\sqrt{\frac{5}{6} }[/tex] T₀

Answer:

Explanation:

The force of gravity depends directly upon the masses of the two objects, and inversely on the square of the distance between them. This means that the force of gravity increases with mass, but decreases with increasing distance between objects

so a option is correct

The efficiency of the leaf blow is 48%.

         Here, E = Energy transferred

                   m = Mass

                   Ф = Temperature change

            Here, E = Energy transferred

                      P = Power

                      t = time

        Here, v = speed

                   f = frequency

                  ∧ = wavelength

       Efficiency =  (Useful power out / Total power in ) = 360/750 = 0.48

So, the efficiency of the leaf blower is 48%.

To learn more about efficiency, refer to: https://brainly.com/question/21305967

#SPJ2

Answer:

t = 3/8 seconds

Explanation:

h=-16t^2 - 10t+6

h= 0 when it hits the ground

0=-16t^2 - 10t+6

factor out a -2

0= -2(8t^2 +5t -3)

divide by -2

0 = (8t^2 +5t -3)

factor

0=(8t-3) (t+1)

using the zero product property

8t-3 = 0    t+1 =0

8t = 3         t= -1

t = 3/8     t= -1

t cannot be negative  ( no negative time)

t = 3/8 seconds

Answer:

option (a)

Explanation:

Maintaining distance while driving in traffic can avoid the chances of an accident.                        

When the driver is behind you is trying to pass you to avoid the collision you should maintain a distance greater than 3 sec.

Hence, option (a) is correct.

Answer:

a driver behind your vehicle is trying to pass you

Explanation:

took test and checked

Answer:

I actually have 20000 arena points thank you very much

Answer: Caca means in French lol.

Answer:

5 metres

Explanation:

Work Done = Force x Distance

So Distance = Work done ÷ Force

= 35 ÷ 7.0

= 5 metres

Answer:

5 newtons

Explanation:

Just divide them

which of the following statements BEST describes the difference between an atom and an ion ?

Answer:

well the correct answer is

Explanation:

A charged atom is known as an ion, well it can be negative as well as positive charge.

Answer:

210 ft.

Explanation:

Since a square has 4 sides and all sides are equal, just do 210 divided by 4.

Answer:

Explanation:

F = m*a = (0.5)*15 = 7.5 N

Neutrons are required for the stability of nuclei, with the exception of the single-proton hydrogen nucleus. Neutrons are produced copiously in nuclear fission and fusion. They are a primary contributor to the nucleosynthesis of chemical elements within stars through fission, fusion, and neutron capture processes.

Hope it helps!

Answer:

0.47m3

Explanation:

Volume = Mass / Density

In this case:

Mass - 1280 kg

Density - 2700kg/m3

1280 / 2700 = 0.4740741m3

When this is rounded off ( 2 d.p ):

0.47 m3

HOPE THIS HELPED

Answer: d. the low air pressure lowers the boiling point

Explanation:

Note that there cannot be less than 6.1 millibars of liquid water. This fact is important because the Martian surface atmospheric pressure hovers just below that value. Any water that could form from melting water on a warm afternoon will easily vanish into the desiccated Martian atmosphere.

Answer:

=101343.62N/m^2

Explanation:

absolute pressure on the bottom of a swimming pool= atmospheric pressure +( 2 ×ρ ×g)

( 2 ×ρ ×g)= guage pressure

atmospheric pressure= 101325pa

h= height= 1.9 mm = 1.9×10^-3m

ρ = density of water

= 1000kg/m^3

g= acceleration due to gravity= 9.8m/s^2

Then substitute, we have

absolute pressure on the bottom of a swimming pool= 101325+ [0.0019 ×1000 × 9.8)]

=101343.62N/m^2

Hence, the absolute pressure on the bottom of a swimming pool is =101343.62N/m^2

The space station completes 2 revolutions each minute, so that it traverses a distance of 2π (100 m) = 200π m each minute, giving it a linear/tangential speed of

v = (200π m) / (60 s) ≈ 10.472 m/s

(a) The astronaut would experience an acceleration of

a = v ² / (100 m) ≈ 1.09662 m/s² ≈ 0.1119g ≈ 0.11g

(b) Now you want to find the period T such that a = g. This would mean the astronaut has a tangential speed of

v = (200π m) / T

so that her centripetal/radial acceleration would match g :

a = g = ((200π m) / T )² / (100 m)

Solve for T :

(100 m) g = (400π ² m²) / T ²

T ² = (400π ² m²) / ((100 m) g) = (4π ² m)/g

T = √((4π ² m) / (9.8 m/s²)) ≈ 2π √(0.102 s²) ≈ 2.007 s ≈ 2.0 s

Answer:

Here you go, hope this helps! :)

Explanation:

Opportunity cost is the value of the next best thing you give up whenever you make a decision. It is "the loss of potential gain from other alternatives when one alternative is chosen". ... For example, opportunity cost is how much leisure time we give up to work.

Answer:

[tex]\frac{y}{L}[/tex] = 0.66

Hence, the fraction of the length of the rod above water = [tex]\frac{y}{L}[/tex] = 0.66

and fraction of the length of the rod submerged in water = 1 - [tex]\frac{y}{L}[/tex] = 1 - 0.66 = 0.34  

Explanation:

Data given:

Density of the rod = 5/9 of the density of the water.

Let's denote density of Water with w

And density of rod with r

So,

r = 5/9 x w

Required:

Fraction of the length of the rod above water.

Let's denote total length of the rod with L

and length of the rod above with = y

Let's denote the density of rod = r

And density of water = w

So, the required is:

Fraction of the length of the rod above water = y/L

y/L = ?

In order to find this, we first need to find out the all type of forces acting upon the rod.

We know that, a body will come to equilibrium if the net torque acting upon a body is zero.

As, we know

F = ma

Density = m/v

m = Density x volume

Volume = Area x length = X ( L-y)

So, let's say X is the area of the cross section of the rod, so the forces acting upon it are:

F = mg

F = (Density x volume) x g

g = gravitational acceleration

F1 = X(L-y) x w x g (Force on the length of the rod submerged in water)

where,

X (L-y) = volume

w = density of water.

Another force acting upon it is:

F = mg

F2 =  X x L x r x g

Now, the torques acting upon the body:

T1 + T2 = 0

F1 ( y + [tex](\frac{L-y}{2})[/tex] ) g sinФ - F2 x ([tex]\frac{L}{2}[/tex]) x gsinФ = 0

plug in the  equations of F1 and F2 into the above equation and after simplification, we get:

[tex](L^{2} - y^{2} ) . w[/tex] = [tex]L^{2}[/tex] . r

where, w is the density of water and r is the density of rod.

As we know that,

r = 5/9 x w

So,

[tex](L^{2} - y^{2} ) . w[/tex] = [tex]L^{2}[/tex] . 5/9 x w

Hence,

[tex](L^{2} - y^{2} )[/tex] = [tex]\frac{5L^{2} }{9}[/tex]

[tex]\frac{L^{2} - y^{2} }{L^{2} }[/tex] = [tex]\frac{5}{9}[/tex]

Taking [tex]L^{2}[/tex] common and solving for [tex]\frac{y}{L}[/tex], we will get

[tex]\frac{y}{L}[/tex] = 0.66

Hence, the fraction of the length of the rod above water = [tex]\frac{y}{L}[/tex] = 0.66

and fraction of the length of the rod submerged in water = 1 - [tex]\frac{y}{L}[/tex] = 1 - 0.66 = 0.34

Answer:

oil heats faster

Explanation:

that's all

Answer:

Oil gets hotter faster or something

sowwie :( i need points

Explanation:

Answer:

Ocean currents act as conveyer belts of warm and cold water, sending heat toward the polar regions and helping tropical areas cool off, thus influencing both weather and climate.

Explanation:

Answer: kinetic energy decreases

Explanation:

When the angle between the net force and the displacement of an

object is greater than 90 degree, the Kinetic energy decreases.

The work done by a net force in moving an object over a given distance is given as;

[tex]W = F \times d \ cos(\theta)[/tex]

where;

The value of cos(θ) decreases from 0 to 180, consequently, the value of work-done will decrease as well.

Based on work-energy theorem, the work done on the object is equal to kinetic energy of the object.

[tex]W = K.E[/tex]

Thus, we can conclude that when the angle increases, the Kinetic energy decreases.

Learn more about kinetic energy here:https://brainly.com/question/10063455

Answer:

1.6537 * 10^9

Explanation:

Given that :

Distance (r) = 2.56 × 10^7 m

Using the relation from Kepler's third law of motion :

T2 = [ 4* pi^2/ G (M1 + M2) ]r^3

M1 = mass of earth = 5.97 *10^24

M2 = Mass of satellite = 9.0 × 10^3 kg

G = Gravitational constant = 6.67 *10^-11

T2 = [ (4 x 3.14^2) / 6.67 x 10^-11 ( 9 x 10^3 + 5.97 x 10^24)]/ (2.56 x 10^7)^3

= 1.6537 * 10^9

Answer:

3.6*10¹⁰N/C

Explanation:

The formula for Electric field strength is expressed as:

E = kQ/r²

k is the coulombs constant = 9*10^9Nm²/C²

Q is the charge = 1.00×10°C

r is the distance = 0.50m

Substitute the parameters into the formula as shown:

E = kQ/r²

E =  9*10^9(1)/0.5²

E =  9*10^9/0.25

E = 36*10^9

E = 3.6*10¹⁰N/C

Hence  the electric field strength is 3.6*10¹⁰N/C

Answer: B) Methyl alcohol requires less than half as much energy per kg to evaporate than water does

Explanation:

Latent heat of vaporization is the amount of heat required to convert 1 kilo gram of liquid into its vapor state without change in its temperature.

Heat of vaporization is more for water than for methyl alcohol which means more heat is required to convert from liquid to vapour form.

As the Heat of vaporization for methyl alcohol  (1100) is almost half as that of Heat of vaporization for water (2257) , it means  Methyl alcohol requires less than half as much energy per kg to evaporate than water does.

Answer:

both

Explanation:

Answer:

[tex]\huge\boxed{\sf P.E. = 39.2\ Joules}[/tex]

Explanation:

Given Data:

Mass = m = 4 kg

Acceleration due to gravity = g = 9.8 m/s²

Height = h = 1 m

Required:

Potential Energy = P.E. = ?

Formula:

P.E. = mgh

Solution:

P.E. = (4)(9.8)(1)

P.E. = 39.2 Joules

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer: A ,absorption and reflection

Explanation

Absorption and reflection are the two phenomena which describe how the light waves can interact with the wood. Thus, the correct option is A.

Light absorption is a process through which light is absorbed and converted into different form of energy. An example of absorption of light is the process of photosynthesis which takes place in plants. However, light absorption does not occur exclusively in the plants, but in all the creatures and inorganic substances present on this planet.

When a ray of light approaches a smooth polished surface such as a metal surface and the light ray bounces back, it is called as the reflection of light. The incident light ray which lands on the surface is reflected off the surface. The ray that bounces back from the surface is called the reflected ray.

Therefore, the correct option is A.

Learn more about Light waves here:

https://brainly.com/question/23460034

#SPJ6

Answer:

3 hrs

Explanation:

the distance covered by victor= 210 km

speed= 70 km/hrs

so, 70×3= 210

so the answer is 3 hrs

BTW im a small kid so don't just right away say the explanation sucks and the subject physics is not yet started in my grade.

edit: don't give me brainless answer plz.