Answer:
Magnitude of frictional force = 30 N
Explanation:
According to the second Newton's law, the net force exerted by an external agent on an object of mass m is:
Fn=m.a
The net force is the vector addition of each individual force. If the sum of all the forces acting on an object is zero, then the acceleration is zero. That means the object moves at a constant speed or is at rest.
When an object is pushed across a horizontal rough surface, there are two forces acting in the direction of the motion: The applied force and the frictional force.
If the applied force is greater than the frictional force, then the object moves at a constant positive acceleration. If the frictional force is greater than the applied force, then the object won't move at all (if it was at rest) or will start a deaccelerated motion (braking).
Finally, if both forces are equal, the object will move at a constant speed or remains at rest. Since the box is moving at a constant speed, we can conclude the frictional force equals the applied force:
Magnitude of frictional force = 30 N
What is the best definition of marginal cost?
Answer:
Marginal cost is the money paid for producing one more unit of a good.
Explanation:
Yodelin has fifty quarters and dimes. Their total value is $9.80. Which of these systems of equations can be used to find the number of quarters (q) and
dimes (d) Yodelin has?
Answer:
q + d = 50
25q + 10d = 980
Explanation:
The equation that can be employed to determine the number of quarters(q), as well as, dimes(d) that Yodelin has would be:
q + d = 50...(1)
25q + 10d = 980...(2)
Multiplying (1) by 25
25q + 25d = 1250 ...(3)
25q + 10d = 980...(4)
subtracting (4) from (3)
15d = 270
d = 18
q = 50 - 18
= 32
The system of the equations could be
q + d = 50
25q + 10d = 980
Calculation of the equation and the number of quarters and dimes:Since Yodelin has fifty quarters and dimes. Their total value is $9.80.
So here the equations be
q + d = 50...(1)
25q + 10d = 980...(2)
Now we have to Multiplying (1) by 25
So,
25q + 25d = 1250 ...(3)
25q + 10d = 980...(4)
Now
subtracting (4) from (3)
15d = 270
d = 18
So,
q = 50 - 18
= 32
Learn more about equation here; https://brainly.com/question/18648019
Britney drove at a speed of 85 km/hr south for four hours how far did he travel
You row a boat perpendicular to the shore of a river that flows at 3 m/s. The velocity of your boat is 4 m/s relative to the water. What is the velocity of your boat relative to the shore?
Answer:
The velocity vBW of the boat relative to the water is 4.0 m/s, directed perpendicular to the current, as in Figure 3.18.
Explanation:
The boat is perpendicular to the shore. Then the net velocity of the boat with respect to river is 5 m/s. The observer feels like the boat is moving slower than they appear actually.
What is relative velocity ?Relative velocity is velocity of an object measured with respect to other object which can be of stationary or moving with a speed. Thus speed relative to another object is called the relative velocity.
The relative velocity is what's the speed for an observer but it differs from actual velocity. Sometimes it may slower or faster depending on the object with which a we are relating the speed.
Given that the speed of the boat = 4 m/s
speed of river = 3 m/s.
Both are perpendicular and the net velocity of the boat is :
r = √(3² + 4²) = 5 m/s.
Hence, the velocity of the boat relative to the shore will be 5 m/s.
Find more on relative velocity :
https://brainly.com/question/29655726
#SPJ2
PLEASE PLS PLS ANSWER ASAP
Answer:
Explanation:
24 i think
Answer:
B. 24
Explanation:
There are 24 atoms in one molecule of C6 H12 06. This chemical compound is made up of 6 atoms of carbon, 12 atoms of hydrogen, and 6 atoms of oxygen. We find the number of atoms by adding these numbers up. We than get:
6 + 12 + 6 = 12 + 12 = 24
Therefore, there are 24 atoms in the following chemical formula.
Energy can generally be considered to be either kinetic energy or potential energy. Some specific forms of energy, such as electrical, magnetic, and gravitational energy, can operate in the space around objects and affect other objects that come near. In these examples,
Answer: The options are not given.
Here are the options.
A. energy is continuously created.
B. energy is continuously destroyed.
C. energy exists in a field.
D. all of these
The correct option is C.
Energy exists in a field.
Explanation:
Energy is the ability to do work or the property i.e force or power that is moved to an object so that it can perform work.
Energy exists in a field because a field is a region in which each area is affected by a force or power on an object . For example a paper clip placed on a magnetic field require a force or power to be able to attract or repel magnets.
An electric field surronds an electric charge when another particle is around it, it uses energy to either attract or repel the object e.t.c.
Therefore energy exists in field.
Where would the net force acting on a charge placed in a system of like charges be zero?
Answer:
If an object is electrically neutral it has no net charge becuase it has the same number of protons as it does electrons, which are opposite charges that offset each other. No, that just means that the sum of all its positive and negative amounts of charge equals zero.
Which two statements best determine whether an engineering design is
successful?
A. Specific project goals were met.
OB. Time and money limitations were not exceeded.
C. The project received all the necessary funding.
D. The final design was achieved with very few revisions.
D E. The completed design was popular among engineers.
Answer: A and B
Explanation:
just took the apex test
Two statements best determine whether an engineering design is
successful
A. Specific project goals were met.
B. Time and money limitations were not exceeded
What is Project in engineering design?
A "project" consists of a coordinated series of activities or tasks performed by engineers, designers, drafters and others from one or more engineering disciplines or departments.
It is important to meet the need of project what the company wants , to meet the project goals for the correct execution of the project . Setting goals can give you a clear focus , motivates employee and set target for your project to work towards
Since , every project have a budget and a need to know if a project is worth the cost or not .
Both overestimation and underestimation of money have negative consequences and any delay in producing the end result of project can reduce the time to market and lead to reduction of profit.
correct options are
A. Specific project goals were met.
B. Time and money limitations were not exceeded.
learn more about Project in engineering design
https://brainly.com/question/14099501?referrer=searchResults
#SPJ3
Metalloids have properties of both ________ and _____________
Answer:Metaloids have properties of both metals and non-metals.
Explanation:
Calculate: A model airplane has a mass of 3.2 kg. Its propeller pulls it forward with a force of 7.0 N. What is the airplane’s acceleration?
True or False? Physical properties can be observed or measured without changing the identity of matter.
Answer:
true
Explanation:
Eclipses occur because the Moon?
A
does not create its own light and only reflects light from the Sun.
o
does not create its own light and only reflects the light from Earth.
o
с
creates its own light, which is blocked by the Sun during an eclipse.
creates its own light, which is blocked by Earth during an eclipse.
Answer:
с
creates its own light, which is blocked by the Sun during an eclipse.
Explanation:
might not be right but its what i remember
what is measurement ?
Answer:
Measurement is the assignment of a number to a characteristic of an object or event
Explanation:
Answer:
Measurement is the assignment of a number to a characteristic of an object or event, which can be compared with other objects or event
A warm-up is the exact same thing as a flexibility workout
True
False
Answer:
false
Explanation:
did the test this is correct
can you help me doing an essay about actual self
Answer:
yes absolutely
Explanation:
why not
Which of the above beak depth vs time graphs represent the change in finch beak depth that would occur due to successive years of above average rainfall?
Answer:
A
Explanation:
I just did it :)
Answer:
It is A
Explanation:
I did it and got a 100
How do I shift reality?
Answer:
i think you should probably join shifting aminos/discord servers. i would tell you how but it wont fit here :((
Explanation:
Answer:
Shimmey shay on yt
Explanation:
A moving car skids to a stop with the wheels locked across a level roadway. Of the forces listed, identify which act on the car.
Normal
Gravity
Applied
Friction
Tension
Air resistance
Answer:
Normal, Gravity, Friction, and Air Resistance.
Explanation:
When a moving car skid to stop and its wheels are locked across, then the following forces will be applied on the car:
Normal force: It will act counter to gravity that pushes an object against a surface and acts perpendicular to the contact surface.
Gravity: Gravity force acts in each and every object having mass and it can not be avoidable. So, the gravity force will also apply to the car and attract it to the earth's surface.
Friction: Friction is a force that acts opposite to the motion and stops or slows motion. Friction will be applied to the car that will oppose the motion of the car and stop it.
Air resistance: air resistance is defined as the forces exerted by air that acts opposite to the relative motion of an object. Air resistance will also be applied to the car when it will skid to stop as we are always surrounded by the air.
Hence, the correct answers are "Normal, Gravity, Friction, and Air Resistance."
HURRY! Please!
How do the lights in a series circuit behave when one bulb burns out?
O The rest of the bulbs continue to shine at maximum brightness.
OThe rest of the bulbs continue to shine at a lower brightness.
OThe rest of the bulbs continue to shine at a higher brightness
OThe rest of the bulbs stop shining and shut off.
Answer:
D. The rest of the bulbs stop shining and shut off.
Explanation:
When one bulb in a series circuit burns, out, the rest of the bulbs stop shining and shut off. Option D is correct.
What is an electric bulb?
An electric bulb is a gadget that uses electricity to create visible light. It is the most popular type of artificial lighting and is necessary for modern society.
The light bulb is connected to a switch in a parallel configuration. The switch is open, which means there will be a lot of resistance and no current will flow via this route.
Across the parallel connection, the battery would create the same potential difference. Because the current would not go via the open switch, it would instead flow through the light bulb, causing it to illuminate.
When one bulb in a series circuit burns, out, the rest of the bulbs stop shining and shut off.
Hence, option D is correct.
To learn more about the electric bulb, refer to the link;
brainly.com/question/4723473
#SPJ2
Determine the weight of a 10.0-kg person who is running with a speed of 5.0 m/s. Enter a
numerical answer.
Answer:
weight=mass*gravity
weight=10.0*10
so weight=100N
A car started its motion from rest and accelerated for 6 seconds, with the acceleration of 4 m/s2. Then it decelerated for 5 seconds, with the acceleration of -1.6 m/s2. What was the velocity of the car after 6+5 seconds?
Answer:
16 m/s
Explanation:
from the formula: a = velocity/time
you calculate the velocity in both cases (when time is 5 sec and 6 sec) by using the formula: velocity = a x time
v (5 sec) =24 m/s
v (6 sec) = - 8 m/s
then : add v (5 sec) to v (6 sec) and the result is 16 m/s
Most _________ rely on sellers offering their goods or services in exchange for money from buyers
Answer:
Businesses
Explanation:
I think not sure tho
A gold puck has a mass of 12 kg and a velocity of 5i – 4j m/s prior to a collision with a stationary blue puck whose mass is 18 kg. After an elastic collision, the blue puck has a velocity of 2i – 2j m/s. What is the velocity of the gold puck after the collision?
A. 2i –j m/s
B. 3i –j m/s
C. 2i – 2j m/s
D. 3i – 2j m/s
Answer:
Explanation:D
The velocity of the gold puck after the collision is equal to (2i - j) m/s. Therefore, option (A) is correct.
What is velocity?The rate at which a displacement of the body changes in relation to time is called its velocity. Velocity is a vector parameter with both magnitude and direction. S.I. unit of velocity can be represented as meter/second.
Given, the mass of the gold puck, m = 12 kg
The velocity of the gold puck before the collision, u = 5i – 4j m/s.
The mass of the stationary blue puck, M = 18 kg.
The velocity of it after the collision, V = 2i – 2j m/s.
We have to determine the velocity of the gold puck after the collision:
The total momentum of the system before the collision is equal to the total momentum of the system after the collision.
mu + M ×0 = mv + MV
v = u - MV/m
v = (5i – 4j) m/s - (2i – 2j)m/s × 18/12
v = (5i – 4j) m/s - (3i - 3j)
v = (2i - j) m/s.
Therefore, the velocity of the gold puck is (2i - j) m/s after the collision.
Learn more about velocity, here:
brainly.com/question/18084516
#SPJ6
HEY CAN ANYONE PLS ANSWER DIS!!!!!!
Answer:
chocolate chip model
Explanation:
Thomson's discovery of the electron completely changed the way people viewed atoms. He proposed the atom was a sphere, but the positive and negative charges were embedded within it. ... Thomson's model came to be called the "plum pudding model" or "chocolate chip cookie model".
An object has an acceleration of 6m/s/s. If the net force was tripled and the mass was doubled, then the new acceleration would be
If all objects that have mass also have gravity, why doesn't your pencil get pulled towards you while it sits on your desk?
Answer:
The pencil is not pulled towards a person due to a very small magnitude of force between them, due to lighter masses.
Explanation:
Let us apply Newton's Law of Gravitation between a person and pencil.
Average Mass of a Normal Pencil = m₁ = 10 g = 0.01 kg
Average Mass of a Person = m₂ = 80 kg
Distance between both = r = 1 cm = 0.01 m (Taking minimal distance)
Gravitational Constant = G = 6.67 x 10⁻¹¹ N.m²/kg²
So,
F = Gm₁m₂/r²
F = (6.67 x 10⁻¹¹ N.m²/kg²)(0.01 kg)(80 kg)/(0.01 m)²
F = 5.34 x 10⁻⁷ N
This Force is very small in magnitude due to the light masses of both objects.
Therefore, the pencil is not pulled towards a person due to a very small magnitude of force between them, due to lighter masses.
The town of Seaside needs to build a new power plant. The old coal burning plant produces too much pollution and is no longer safe. The mayor decides that he will do some research on alternative forms of energy like nuclear power plants and solar power plants.
What types of resources should the mayor use to conduct his research? Why would these be considered reliable sources of information and why? What types of resources are reliable? How can he use what he learns to make the best decision for the town?
The mayor is making a good decision to do research into renewable forms of energy. Not only does coal produce pollution, it also contributes to greenhouse gas emissions. Plus, the supply of coal is a finite source. It is considered a natural resource instead of renewable. That means that eventually the supply of coal will run out at some point. Renewables do not encounter such a problem.
So it's smart to look into alternative forms of energy such as nuclear or solar. The benefit of nuclear is that it produces a lot of energy and does so efficiently. The downside is that it's that accidents would lead to disastrous outcomes (eg: the nuclear disaster in Japan). Also, there's the issue of what to do with the nuclear waste. The waste itself is very dangerous and it must be buried underground sealed in thick containers. This is an expensive operation. The rate of decay of the material takes a long time, which means that future generations hundreds of years down the line will have to deal with the waste.
Solar is a cleaner alternative to nuclear, but unfortunately it is not as efficient compared to nuclear power. You need a lot of solar panels in a vast open area to be able to get the energy to power many homes. Places out in the desert are a good choice to put the solar farms because the sun shines intensely there and not many people (or no people) live out in remote areas such as that one.
Because the town is called Seaside, it seems like this town is on the coast. If so, then the mayor should look into wind power to complement solar power. Wind along the coast is often very intense due to the sea current and jet stream. The downside to wind power is that some days the wind doesn't blow at all. The mayor could also look into tidal power which harnesses the flow of the tides coming in and out. If a major river is nearby (that flows into the ocean) then s/he could consider hydroelectric power as well. There are many renewable options to pick from. Each option has its pros and cons, so it's up to the mayor to weigh what exactly their needs are and how efficiently they want electricity. Mixing various options is possibly the best idea since you get a bit of each pro/con from all the options mentioned.
What is the coefficient of friction of an object with a weight of 300 N and a force of friction of 150 N?
1
0.75
.5
0
Answer:
0.5
Explanation:
Given parameters:
Weight of object = 300N
Force of friction = 150N
Unknown:
Coefficient of friction = ?
Solution:
Frictional force is a force that resists the motion of a body.
It is mathematically expressed as;
frictional force = uN
Where u is the coefficient of friction
N = Normal force = weight of the object
Now input the parameters and find u;
150 = u x 300
u = [tex]\frac{150}{300}[/tex] = 0.5
The coefficient of friction here is 0.5
Estimate the total mass of ocean on earth
Why would the CPSC perform studies when other soap and detergent companies have already conducted research on the same products? The CPSC is the only organization that can test the safety of soaps and detergents. Studies conducted by any company that benefits financially are considered unreliable. Studies performed by the CPSC give reliability to the results of improved safety obtained by each soap company. Tests performed by the CPSC follow established scientific methods, but those performed by soap companies do not.
Answer: Studies performed by the CPSC give reliability to the results of improved safety obtained by each soap company.
Explanation:
The function of Consumer Product Safety Commission is to make sure that the products which are used by consumers are safe and also make sure that companies meet the required and acceptable safety standards. The products that are seen to be harmful to the health of the consumers are banned.
Regarding the question above, CPSC would perform studies when other soap and detergent companies have already conducted research on the same products because the studies performed by the CPSC give reliability to the results of improved safety obtained by each soap company.
Answer:
Tests performed by the CPSC follow established scientific methods, but those performed by soap companies do not.
Explanation: