Self-inductance is 23.4 mH 0.145 seconds it is turned off it be turned off if the induced EMF cannot exceed 3.00 v and a current of 22.0 a flows through this inductor.
What is Self-inductance?As the current in the coil changes, the magnetic flux associated with the coil also changes, thus inducing an electromotive force in the coil. This phenomenon is referred to as self-induction. Self-induction of a coil is a property due to its tendency to maintain a magnetic flux associated with it and to counteract changes in magnetic flux by inducing current. This property of coils is similar to mechanical inertia. That is why self-induction is called electric inertia. The self-inductance of a coil is numerically equal to the amount of magnetic flux associated with the coil when a unit current flows through it. The SI unit for self-inductance is the henry (H) or weber per ampere. 1H = 1Wb/A.to learn more about Self-inductance from the given link :
https://brainly.com/question/28167218
#SPJ4
Your friend says that for a moving object to continue moving, a force must be continually applied to it. Do you agree with your friend? Explain your answer. Answer in complete sentences.
Answer:
I would disagree with my friend because that according to Newton's first law, an object in motion will continue to be in motion until stopped by another object/force. If the object is already moving, it will stay in motion until something else stops it. There is no need for a force to be continually applied to it while it's already moving.
An electric kettle has a power rating of 2000W. It takes 90 seconds to heat 500g water from 20 degree celsius to boiling. Use this information to calculate approximate value for the specific heat capacity of water.
The approximate value for the specific heat capacity of water. is 4.2857 CGS unit.
What is specific heat capacity?The quantity of heat energy needed to raise a substance's temperature per unit of mass is known as specific heat capacity. A material's specific heat capacity is a physical characteristic. Since its value is inversely correlated with the size of the system under study, it is also an illustration of an extended feature.
An electric kettle has a power rating of 2000W means the kettle consumes 2000 joule in one second.
So, In 90 seconds, it provide heat = 2000×90 joule
= 180000 joule
= 42857 calorie.
To heat 500g water from 20 degree Celsius to boiling, heat required = 500×s×20 caloric
=10000s caloric.
Where, s = specific heat of water.
So,
10000s = 42857
⇒ s = 4.2857.
Use this information to calculate approximate value for the specific heat capacity of water. is 4.2857 CGS unit.
Learn more about heat here:
https://brainly.com/question/1429452
#SPJ1
An airplane accelerated uniformly from rest at the rate of 5. 0 m/s2 south for 14 s. What final velocity did it attain?.
The final velocity of the airplane is 70 m/s.
Velocity is the directional velocity of an object in movement as a demonstration of its price of exchange in function as found from a specific body of reference and as measured by using a specific well-known time.
Speed is the time fee at which an item is shifting along a direction, at the same time as velocity is the rate and route of an object's movement. placed any other way, speed is a scalar cost, whilst pace is a vector.
Speed is the velocity at which something moves in a selected course. for example as the velocity of a car traveling north on a highway, or the velocity at a rocket travels after launching. In the scalar manner, the absolute price value of the rate vector is continually the velocity of the motion.
Calculation:-
v = u + at
= 0 + 5 × 14
= 70 m/s
Learn more about velocity here:-https://brainly.com/question/24445340
#SPJ4
50pts!
The average density of an object is 0.46 kg/m3. Which of these images is correct after the object is placed in olive oil with a density of 0.92 kg/m3?
Will the cube sink?
Will the cube float?
Will the cube be suspended?
I have no clue, but maybe you do
The cube will float.
What is Archimedes' principle?The upward buoyant force that is applied to a body submerged in a fluid, whether wholly or partially, is equal to the weight of the fluid that the body displaces and acts in the upward direction at the center of mass of the displaced fluid, according to Archimedes' principle.
Given parameters:
The average density of an object is 0.46 kg/m³.
The density of olive is oil 0.92 kg/m³.
As The average density of an object < density of olive oil; the liquid displaced by the object has more weight than the weight of the object.
Learn more about Archimedes' principle here:
https://brainly.com/question/13106989
#SPJ1
8. Scarlet Skydiver, who has a mass of 60 kg, jumps from a stationary helicopter. What is the net force on her as she
emerges from the helicopter?
The net force on her as she emerges from the helicopter 588 N.
What is force?
A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
The gravitational constant, denoted by the capital letter G, is an empirical physical constant involved in the calculation of gravitational effects in Sir Isaac Newton's law of universal gravitation and in Albert Einstein's theory of general relativity.
The net force on her as she emerges from the helicopter 588 N.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ1
which term symbol(s) describes the term-labeled atomic state(s) that might possibly split in to the greatest number of energetically distinct sub-states under the influence of an appropriate external magnetic field and what is the degeneracy of that particular atomic state(s)?
L=1 is the only combination possible because l1=0 and l2=1. S=1,0 is one of the possible combinations of S. This indicates that M = 3 or M = 1. Term symbols will take the 1P and 3P forms.
A specific electronic state of an atom (often one with many electrons) is designated by an atomic term symbol in electronic spectroscopy by providing the quantum numbers for the angular momenta of that atom. An atomic term symbol's shape suggests Russell-Saunders coupling. When rotated about the internuclear axis, a sigma antibonding orbital in the * orbital family likewise keeps the same phase. S is the total sum of the spin vectors of all the electrons. Although subtle, the distinction between S and Ms is crucial for comprehending multiplicity.
Learn more about electronic here-
https://brainly.com/question/2538188
#SPJ4
how does energy cost per mile relate to body mass? group of answer choices it increases proportionately with body mass the two are unrelated it decreases proportionately with body mass energy cost per mile remains constant
It increases proportionately with body mass in this way energy cost per mile relate to body mass.
An individual's height and weight are used to calculate their body mass index. The body mass index (BMI) is calculated by dividing the body weight in kilograms by the square of the height in meters. It is expressed in kilograms per square meter (kg/m2) and is a function of both height and weight. Weight in kilograms divided by height in meters squared yields the Body Mass Index (BMI) of a person. High levels of body fat may be indicated by a high BMI. A person's body mass index (BMI) does not provide a diagnosis of their health or body fatness; rather, it is a screening tool for weight categories that may cause health issues. Based on your height, weight, and BMI, you can calculate your body fat percentage. BMI measurements are widely regarded by doctors as an easy way to assess a person's weight and determine whether they are overweight or underweight, or whether they are healthy.
Learn more about body mass here:
https://brainly.com/question/22826897
#SPJ4
a) state the null and the alternate hypothesis in complete statements for the current context. b) is there a significant linear relationship between the variables? explain your reasoning.
The independent variables of measuring physical properties are given below -
What is physical properties?
A physical properties in any property that is measurable, whose value describe a state of physical system.
The changes in the physical properties of a system can be used to describe its changes between the momentary that state of
Physical properties are often referred to as observables.
They are not modal properties.
Any variable that can be attributed a value without attributes a value to any to any other variables is called independent variables.
It is a variable that stands alone and isn't changed by other variables you are trying to measure.
To know more about physical properties click-
https://brainly.com/question/19921381
#SPJ4
A projectile fired from ground level with a speed of 20ms-¹ just missed the top of a pole 5.2m high.calculate the angle of projection with the respect to the ground [g=10ms-²]
Answer:
Explanation:
Given:
V₀ = 20 m/s
H = 5.2 m
g = 10 m/s²
___________
α - ?
H = V₀²·(sin α)² / (2·g)
V₀²·(sin α)² = 2·g·H
(sin α)² = 2·g·H / V₀²
sin α = √ (2·g·H) / V₀
sin α = √ (2·10·5.2) / 20 ≈ 0.5
α = 30°
What should be the minimum power of a generator supplying 220V to simultaneously supply the following appliances: 1 fridge 1500W, 3 halogen lamps 500W, 1 electric coffee maker 1600W?
☐ 1,8 KVA
☐ 3,3 KVA
☐ 5 KVA
☐ 7,5 KVA
The minimum power of the generator to power 1 fridge, 3 halogen lamps, and 1 electric coffee maker simultaneously must be 5 KVA.
What is electric power?
Electric power can be defined as the measurement of electric energy flowing in the electric circuit per second.
The electric power consumed by the appliances is given as;
1 fridge = 1500 W3 halogen lamps = 500 W each1 electric coffee maker = 1600 WThe total electric power consumed by the appliances is calculated as follows;
total electrical power consumed = 1500 W + 3(500 W) + 1600 W
total electrical power consumed = 1500 W + 1500 W + 1600 W
total electrical power consumed = 4,600 W
total electrical power consumed = 4.6 kW = 4.6 kVA
electrical power consumed ≈ 5 kW = 5 KVA
Thus, the minimum electrical power to be generated to power all the given appliances simultaneously must be at least 5 KVA.
Learn more about electrical power here: https://brainly.com/question/60890
#SPJ1
An object is acted upon by two forces 100N and 80N. Calculate the resultant of two axis, if they are acting at angle of 120° too each other.
Answer:
Below
Explanation:
Here is one possibility:
Vertical components added together = 80 sin 120 + 0 = 69.28
Horizontal components = 80 cos 12 0 + 100 = 60 N
Resultant magnitude = sqrt ( 69.28^2 + 60^2) = 91.65 N
Angle = arctan (69.28/60)=49.1°
Q6. A crane lifts a load weighing
3000N through a height of 5m in
10s. What is the power of the
crane?
Answer:
Crane power 1 500 Watt
Explanation:
Given:
F = 3000 N - Cargo weigh
H = 5 m - Height
t = 10 s - Time
___________
P - ? Crane power
Work done by crane:
A = F·H = 3000·5 = 15 000 J
Crane power:
P = A / t = 15 000 / 10 = 1 500 W
is there a net force on th eloop of wire from the magnetic field interacting with the current segments?
The magnetic field's interaction with the current segments does not result in any net force being applied to the wire's elope. A force is an influence that has the power to change how a body moves.
An electric charge, an electric current, and magnetic field's are all affected magnetically by a magnetic field, which is a vector field. A force perpendicular to the magnetic field and its own velocity acts on a moving charge in a magnetic field.
An influence that can alter an object's motion is called a force. A force can cause an object with mass to change its velocity, or accelerate (for example, moving from a state of rest).
Learn more about magnetic field's here
https://brainly.com/question/23096032
#SPJ4
Consider a level flight turn of a propeller-driven airplane in which the airplane makes a complete circular turn in 1.8 min. If the plane's speed is 160 m/s, what is the radius of the circle? What is the centripetal acceleration of the plane?
1. The radius of the circle is 2758.6 m
2. The centripetal acceleration of the plane is 9.28 m/s²
1. How do I determin the radius of the circle?
To obtain the radius, we'll begin by obtaining the angular velocity. This can be obtained a follow:
Period (T) = 1.8 mins = 1.8 × 60 = 108 sPi (π) = 3.14Angular velocity (ω) =?ω = 2π/ T
ω = (2 × 3.14) / 108
ω = 0.058 rad/s
Finally, we shall determine the radius. This is shown below:
Velocity (v) = 160 m/sAngular velocity (ω) = 0.058 rad/sRadius (r) =?r = v / ω
r = 160 / 0.058
r = 2758.6 m
Thus, the radius is 2758.6 m
2. How do I determine the centripetal acceleration?
The centripetal acceleration can be obtained as illustrated below:
Velocity (v) = 160 m/sRadius (r) = 2758.6 mCentripetal acceleration =?Centripetal acceleration = v² / r
Centripetal acceleration = (160)² / 2758.6
Centripetal acceleration = 9.28 m/s²
Learn more about centripetal acceleration:
https://brainly.com/question/9383491
https://brainly.com/question/24290129
#SPJ1
caleb is driving at a speed of 20.5 m/s when he sees a deer on the road ahead. he applies the brakes when he is a distance of 213 m from the deer. if the deer does not move and the car stops right before it hits the deer, what is the acceleration provided by the brakes?
The acceleration provide by the car is 1.26m/s².
What is acceleration?
The rate of change in both speed and direction of velocity over time is defined as acceleration. when anything moves faster or slower in a straight line, it is said to have been accelerated. Because the direction is always shifting, motion on a circle accelerates even when the speed is constant.
What is speed?
As opposed to speed, velocity describes the rate and direction of motion of an object moving along a path.
Given, u= 23m/s
v=0
s=210m
A=?
using the equation of motion from the context section we get
v²=u²-2as
0=u²-2as
u²=2as
a=u²/2s
a=23²/2*210
a= 1.26m/s²
The answer is deacceleration of the car is 1.
Therefore, the acceleration provide by the car is 1.26m/s².
Learn more about acceleration from the given link.
https://brainly.com/question/460763
#SPJ4
which of the following (with specific heat capacity provided) would show the smallest temperature change upon gaining 200.0 j of heat? which of the following (with specific heat capacity provided) would show the smallest temperature change upon gaining 200.0 j of heat? 50.0 g fe, cfe
Cu = 0.385 J/gC, show smallest temperature change upon gaining 200 J.
Calculation:-
50.0 g Cu , Cu = 0.385 J/gC, will show the smallest change in temperature.
Temperature is the measure of hotness or coldness expressed in terms of any of several scales, including Fahrenheit and Celsius.
In A temperature change = (50 × 0.903)/ 200 = 0.22575 °C
In B temperature change = (50 × 0.385)/200 = 0.09625 °C,
Therefore, 50.0 g Cu , Cu = 0.385 J/gC, will show the smallest change in temperature.
Learn more about temperature here:- https://brainly.com/question/8382495
#SPJ4
Disclaimer:- Your question is incomplrte, please see below for complete question.
which of the following (with specific heat capacity provided) would show the smallest temperature change upon gaining 200.0 j of heat? which of the following (with specific heat capacity provided) would show the smallest temperature change upon gaining 200.0 j of heat?
a. 50.0 g fe,
b. 0.385 J/gC
c. both
d. none
by simplifying and solving the continuity, momentum, and energy equations, determine the maximum temperature and where it occurs. the maximum temperature is
The maximum temperature is the temperature gradient profile.
Temperature is a measure of the average kinetic energy of the particles in the sample. There is no absolute maximum for temperature because there is no upper limit for kinetic energy. When the sun sets, the radiation from the sun and the radiation from the earth are balanced, the temperature stops rising, and we see the highest temperature of the diurnal cycle.
Use a special thermometer to measure maximum and minimum temperatures. It's called a maximum-minimum thermometer. Used in meteorology horticulture etc. to record temperature extremes in a location. The temperature difference is the difference between the maximum and minimum temperatures of a day. High and low temperatures are measured with thermometers attached to a slitted wooden box called a Stevenson sieve.
Learn more about The maximum temperature here:- https://brainly.com/question/19491468
#SPJ4
an object is placed in a fluid and then released. assume that the object either floats to the surface (settling so that the object is partly above and partly below the fluid surface) or sinks to the bottom. (note that for parts a through d, you should assume that the object has settled in equilibrium.)
The correct Option is Always true.
According to Archimedes' principle when an object is immersed in a liquid, and it is either partially or wholly submerged, the upward force that acts on the object, is known as buoyancy force and it is equal to the weight of the liquid displaced by the object.
So, the buoyancy force is always present whenever an object is placed in a liquid. Archimedes' principle proves that The magnitude of buoyancy force is always equal to the weight of the fluid displaced by the object
Hence the correct option is Always.
If you need to learn more about buoyancy force, click here
https://brainly.com/question/13267336?referrer=searchResults
#SPJ4
The complete Question is :
An object is placed in a fluid and then released. Assume that the object either floats to the surface (settling so that the object is partly above and partly below the fluid surface) or sinks to the bottom. (Note that, for Parts A through D, you should assume that the object has settled in equilibrium.)
A.Consider the following statement: The magnitude of the buoyancy force is equal to the weight of fluid displaced by the object.
Under what circumstances is this statement true?
A. always
B. only for an object that floats
C. only for an object that sinks
D. never
two blocks are sliding on a frictionless surface. eventually, the smaller block catches up with the larger one, collides with it, and sticks. what is the speed of the two blocks after the collision?
When two blocks are sliding on a frictionless surface ,Then speed of the two blocks after the collision is 2V.
What is a frictionless surface?A Frictionless surface refers to that kind of surface where the force acting on any object which makes it difficult for the object to slide is almost zero or negligible,
As per the given data
The mass of smaller box= m and velocity =v
And the mass of larger box =M and velocity =V
So the momentum ps=mv and pL= MV
And combined mass of both the boxes will be M+m
Hence the combined velocity after collision = Momentum of combination/Mass of combination
V=MV+mv/M+m
Then V =V+v
V=2V
Hence, When t wo blocks are sliding on a frictionless surface ,Then speed of the two blocks after the collision is 2V.
To know more about the frictionless surface visit
https://brainly.com/question/434969
#SPJ4
Which sentence in the passage can be used to conclude that Eris is a dwarf planet and not a planet?
Eris takes about 557 Earth years to orbit the Sun. It has a mean surface temperature of about 40 Kelvin. It has a nearly spherical shape. It has several other objects in its orbit, though few are as massive as itself. Eris is too far away and small to be clearly visible from the Earth. Scientists used its moon, Dysnomia, to measure it. Eris is believed to be slightly more massive than Pluto. However, both of them are smaller than Earth’s Moon. Eris orbits the Sun directly; it is not a satellite of another planet or dwarf planet.
Answer:
It has several other objects in its orbit, though few are as massive as itself."
what methods did the german government take to encourage the expansion of solar power?
Feed-in tariffs methods was used by german government to encourage the expansion of solar power.
A feed-in tariff is an energy policy focused on supporting the development and dissemination of renewable power generation. In a feed-in tariff scheme, providers of energy from renewable sources, such as solar, wind or water, receive a price for what they produce based on the generation costs.
This process usually involve long-term contracts, from 15 to 20 years. Mostly energy is focused to be used from renewable resources. As we know that renewable sources are good for environment and there is no limited resources to this.
To know more about Feed in tariff, visit here
https://brainly.com/question/13263147
#SPJ4
when a thick lamp filament and a thin lamp filament are connected in parallel, which has the greater voltage drop?
A thick filament will draw more current than a tiny wire linked across the same potential difference because it has lower resistance.
The voltage drop across each bulb is 6.0 V when the light bulbs are linked in parallel, and they all glow as the current passing through them combines to generate the current flowing through the battery. It is accurate to say that a battery experiences more electrical resistance than the resistance when two bulbs are linked in series.
A filament lamp's resistance rises as the potential difference widens because the filament gets hotter. The current is produced by the flow of electrons, which also causes the atoms inside the filament to vibrate more rapidly, which causes the filament to heat up.
Learn more about filament here-
https://brainly.com/question/28195653
#SPJ4
Question 1 Review
Listen
A projectile is launched horizontally from a height of 65 meters with an initial horizontal speed of 35 meters per second. What is the projectile's horizontal
speed after it has fallen 25 meters? [Neglect friction.]
Answer: 35 m/s
Explanation: Gravitational acceleration only affects the vertical component of motion meaning the horizontal component never changes. This means 35 m/s is the correct answer.
A projectile is fired horizontally at an initial horizontal speed of 35 meters per second from a height of 65 meters, after falling 25 meters, the projectile's horizontal speed is 35 m/s.
What is speed?
The distance traveled in relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar number.
Speed is calculated using the formula s=d/t, where s is the speed in m.s⁻¹, d is the distance in m, and t is the time in s.
Variable speed is when an object travels a different distance at the same time intervals, whereas uniform speed is when an item travels the same distance at the same time intervals.
Therefore, after falling 25 meters, the projectile's horizontal speed is 35 m/s.
Learn more about speed, here:
https://brainly.com/question/13649166
#SPJ2
the radius of a sphere decreases at a rate of 6 m/sec. find the rate at which the surface area decreases when the radius is 20 m. recall that the surface area of a sphere of radius r is given by s
The rate at which the surface area decreases is -960 π m²/sec.
The surface area of a solid object is a measure of the entire vicinity that the floor of the object occupies. the distance occupied by means of a -dimensional flat surface is known as the area. it is measured in square devices. The location occupied through a three-dimensional item by using its outer surface is referred to as the surface place. it is also measured in square units.
The surface area is the full area included via all the faces of a 3D object. as an example, if we want to find the amount of paint required to paint a cube, then the floor on which the paint might be carried out is its surface vicinity. it is continually measured in rectangular units.
calculation:-
Given,
The radius of the sphere decreases at the rate of 6 m/ sec
mean dx/dt = -6
The surface area of the sphere of radius r is = 4πr²
Differentiating with respect to t,
dS/dt = 4π(2r)dx/dt
= 8πr dx/dt
dS/dt = 8π(20)²(-6)
= -960 π m²/sec
Learn more about the surface area here:-https://brainly.com/question/28419179
#SPJ4
Two objects in a closed system collide while moving directly toward each other. Each has a mass of 1. 00 kg and is moving at 1. 80 m/s. What is the total momentum after the collision?.
The total momentum after the collision is 1.80 kgm/s
Since we are provided with the mass of both the objects which is 1. 00 kg and there were moving towards each other before Collison under a closed system with the velocity of 1. 80 m/s.
Since the momentum of an object is the magnitude of there mass imotion, the formula for calculating momentum is = mass * velocity
So, the momentum of the objects before collisions are = 1 kg *1. 80 m/s
= 1.80 kgm/s ,. when two objects collide in a closed system, the total energy of the two objects before the collision is the same as the entire momentum of the two objects after the collision. The momentum of each object may change, but the entire momentum must stay the same.So the momentum after the collision is 1.80 kgm/s
To know more about momentum refer to the link https://brainly.com/question/24030570?referrer=searchResults.
#SPJ4
Answer: The correct answer is 0.00 kg · m/s.
Explanation:
the purpose of this lab is to determine the amounts of potential and kinetic energy of a marble at various points on a roller coaster
The amount of potential electricity saved inside the marble decreases while its kinetic strength will increase.
In physics, the kinetic energy of an item is the electricity that it possesses because of its movement. it's far defined because the paintings needed to boost up a body of a given mass from relaxation to its said pace. Having received this electricity throughout its acceleration, the frame keeps this kinetic power except its speed changes.
Kinetic energy is a shape of energy that an object or a particle has by means of purpose of its motion. If work, which transfers strength, is carried out on an item by applying a net pressure, the object accelerates and thereby gains kinetic electricity.
Electric kinetic power truly explains the transit of the electrical electricity itself, power. as an instance, the electrical contemporary that includes the charge from a battery to the mild bulb is kinetic electricity.
Learn more about kinetic energy here:-https://brainly.com/question/25959744
#SPJ4
when an object is in free fall we disregard the effect that air resistance would have in slowing down the object. so if a 10 kg object is in free fall and allowed to fall for 20 s, what will be the final velocity at the end of this time? remember: v i
The final velocity at the end of this time will be 200 [tex]m/s^{2}[/tex]
When any object is in free fall, then
The value of acceleration = g [tex]m/s^{2}[/tex] = 10 [tex]m/s^{2}[/tex]
The initial velocity (u) = 0 m/s
Let the final velocity (v) = v m/s
The mass of the object (m) = 10 kg
Time taken to reach the ground = 20 s
We will calculate the height (s) from which the object falls,
We employ the 2nd equation of motion since the object is under constant acceleration,
We have,
[tex]s = ut +\frac{1}{2} at^{2}[/tex]
Putting the values in the equation, we get
[tex]s = 0 +\frac{1}{2} *10 *20^{2} \\\\s = 2000[/tex]
Thus, the height is 2000 m
Now, we apply the third equation of motion,
[tex]v^{2} -u^{2} = 2as[/tex]
Putting all the values, we get,
[tex]v^{2} -0^{2} = 2*10*2000\\\\v^{2} = 40000\\\\v = 200[/tex]
Hence, the final velocity at the end of this time will be 200 [tex]m/s^{2}[/tex]
To read more about velocity, visit https://brainly.com/question/18084516
#SPJ4
if observations of supernovae in other galaxies show that such an explosion happens in a spiral galaxy like the milky way on average every 25 to 100 years, why have astronomers on earth not seen a supernova explosion in our galaxy since 1604?
Our galaxy's disk is heavily covered in dust, which tends to obstruct the light from supernova explosions in our galaxy's more distant regions.
It's a result of length, dust, and bad luck. Numerous astronomers from all over the world have remarked that the last supernova to be documented in any form of trustworthy source occurred in 1604.
It is noticed that a star with a mass similar to the Sun that is on the verge of dying is surrounded by a significant amount of dust and gas, which is stuff it has released during the last stages of its existence.
What is galaxy?
A galaxy is a vast assemblage of gas, dust, and countless stars and stars and planets. Gravity is what holds a galaxy around each other. A supermassive black hole also resides in the center of our galaxy, the Milky Way. You see additional stars in the Milky Way as you glance at the night sky for stars.
To learn more about galaxy
Here: https://brainly.com/question/13956361
#SPJ4
Our galaxy's disk is heavily covered in dust, which tends to obstruct the light from supernova explosions in our galaxy's more distant regions.
What is galaxy?
A galaxy is a vast assemblage of gas, dust, and countless stars and stars and planets. Gravity is what holds a galaxy around each other. A supermassive black hole also resides in the center of our galaxy, the Milky Way. You see additional stars in the Milky Way as you glance at the night sky for stars.
It's a result of length, dust, and bad luck. Numerous astronomers from all over the world have remarked that the last supernova to be documented in any form of trustworthy source occurred in 1604. It is noticed that a star with a mass similar to the Sun that is on the verge of dying is surrounded by a significant amount of dust and gas, which is stuff it has released during the last stages of its existence.
To learn more about galaxy
brainly.com/question/13956361
#SPJ4
solid matter is mostly empty space. the reason solids don't fall through one another is because group of answer choices atoms are constantly vibrating, even at absolute zero. of nuclear forces. of gravitational forces. of electrical forces. none of these
The reason solids don't fall through one another is because Electrical forces.
What are electrical force?
Electric force is the attractive or repulsive interaction at all between the two charged bodies. Similar to any force, Newton's laws of motion describe how it affects the target body and how it does so. One of the many forces that affect objects is the electric force.
To analyse the motion caused by that kind of force as well as combination of forces, Newton's laws are applicable. The analysis starts with the creation of a free body image, where the vector represents the individual forces' types and directions in order to calculate their sum, known as the net force, which can be used to calculate the body's acceleration.
Hence the answer is electrical forces.
To learn more about electrical forces the link is given below:
https://brainly.com/question/15012745?
#SPJ4
O
I. An object of mass 8. 0 kg is falling vertically through the air. The drag force acting on the object is 60 N. What is the best estimate of the acceleration of
the object
A. Zero
B. 2.5 ms-2
C. 7.5 ms-2
D. 10 m s-2
The best estimate of the acceleration of the object 2.5 m/sec².
What is force?A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
Force due to gravity = mg
= 8*9.8 = 78.4 N
Net force on object = 78.4 - 60 = 18.4 N
Acceleration = 18.4/8 = 2.5 m/sec²
The best estimate of the acceleration of the object 2.5 m/sec².
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ1