Answer:
Specific heat capacity formula
Explanation:
The heat capacity gives the exact heat energy at which a given mass of a substance is heated from one temperature to another.
This formula can help determine how much heat is gained or lost during the reaction and is given by:
Q = mcΔT
where:
Q = heat energy in Joules or Calories
m - mass of the substance (g)
c = Specific heat capacity (J/kg°C)
ΔT = change in temperature = (final temp - initial temp) (°C)
I hope this was helpful.
Which action is necessary for a solar eclipse to occur?
Answer:
Moon has to be in-between the Earth and the Sun.
2. Moon's umbra should sweep your place.
3. Latitude and longitude of your place should be within the befitting limits.
What is molarity measured the concentration of
ANYONE CAN HELP ME WITH THIS PLEASE ?
Answer:
0.2g
Explanation:
mass=mole/molar mass
molar mass of oxygen is 32
6.06/32=0.19 or 0.2 units=grams
What would happen to the volume of a gas if you increased the temperature?
Answer:
The volume of the gas increases as the temperature increases.
Explanation:
Gas volume does increase with increasing temperature providing that the pressure remains constant. Temperature and pressure both interact with the gas volume according to the gas Laws and both variables must be accounted for at the same time.
Which method would be best for separating the components of a mixture that is made from two different liquids?
O distillation
evaporation
filtration
sorting
Answer:
I think you should use distillation cauze it helps to separate two mixtures
Answer:
A.) distillation
Explanation:
edge 2021
The smallest unit of an element, which cannot be broken by any chemical means is called?
atom
compound
element unit
molecule
two reason that show sugar is compound
Answer:
Table sugar, or sucrose, is a compound because it's formed when two or more elements are joined together. Its chemical formula is C12H22O11, and it contains carbon, hydrogen and oxygen. More specifically, each molecule of sugar has 12 carbon atoms, 22 hydrogen atoms and 11 oxygen atoms.
Explanation:
hope this helps
Would you expect oxygen (O) to react more like sulfur (S) or nitrogen (N)? Support your prediction with evidence .
Answer:
Sulfur
Explanation:
Oxygen like sulfur would chemical react and combine with other compounds in the same way. This is because they are both located in the same group on the periodic table.
Elements in the same group have the same chemical properties and they will react the same way.
The general formula of the elements in this group are ns² np⁴.
All the elements in this group have 4 electrons in their np⁴ shell and they belong to the p-block.
calculate the mass of Ag3AsO4 that would be produced if enough AgNO3 solution is added to precipitate all of the AsO43- in the 100.0 mL of the 0.1 M Na3AsO4 solution. Record this amount on your report sheet.
Answer:
5 g
Explanation:
Step 1: Write the balanced equation
3 AgNO₃(aq) + Na₃AsO₄(aq) ⇒ Ag₃AsO₄(s) + 3 NaNO₃(aq)
Step 2: Calculate the reacting moles of Na₃AsO₄
100.0 mL of 0.1 M Na₃AsO₄ react.
0.1000 L × 0.1 mol/L = 0.01 mol
Step 3: Calculate the moles of Ag₃AsO₄ formed from 0.01 moles of Na₃AsO₄
The molar ratio of Na₃AsO₄ to Ag₃AsO₄ is 1:1. The moles of Ag₃AsO₄ formed are 1/1 × 0.01 mol = 0.01 mol.
Step 4: Calculate the mass corresponding to 0.01 moles of Ag₃AsO₄
The molar mass of Ag₃AsO₄ is 461.61 g/mol.
0.01 mol × 461.61 g/mol = 5 g
Which is one piece of information that "9” gives about an atom of fluorine?
The atomic mass is different than the atomic number, and the number of neutrons is the difference between the atomic mass and the atomic number.
the atomic number
the atomic mass
the mass of protons
the number of neutrons
Answer:
The Atomic Number
Explanation:
How many liters of CO2 gas can be produced at 30.0 °C and 1.50 atm from the reaction of 5.00 mol of C3H8 and an excess of O2 according to the following equation? C3H8 (g) + 5O2 (g) → 3CO2 (g) + 4H2O (g)
Answer:
249 L
Explanation:
Step 1: Write the balanced equation
C₃H₈(g) + 5 O₂(g) → 3 CO₂(g) + 4 H₂O(g)
Step 2: Calculate the moles of CO₂ produced from 5.00 moles of C₃H₈
The molar ratio of C₃H₈ to CO₂ is 1:3. The moles of CO₂ produced are 3/1 × 5.00 mol = 15.0 mol
Step 3: Convert "30.0°C" to Kelvin
We will use the following expression.
K = °C + 273.15
K = 30.0°C + 273.15 = 303.2 K
Step 4: Calculate the volume of carbon dioxide
We will use the ideal gas equation.
P × V = n × R × T
V = n × R × T/P
V = 15.0 mol × 0.0821 atm.L/mol.K × 303.2 K/1.50 atm
V = 249 L
Is Kool-Aid an element, compound, or mixture? How do you know?
CAN SOMEBODY HELP ME WITH THIS QUESTION PLEASE !! ?
hope it helps you......
What would you use to determine whether an acid or alkali has been added to a solution?
A. Reactant
B. Indicator
C. Adjustor
D. Identifier
Answer:
B. Indicator
Explanation:
An indicator is used to determine whether an acid or alkali has been added to a solution.
Indicators can be liquid or a paper called litmus paper. There also some digital forms of indicators that can tell whether an acid or alkali has been added to a solution.
An acid and alkali will change the pH of a solution. pH is the amount of hydrogen ions that are in a solutionSo, these changes in the pH when an acid or alkali is introduced is usually monitored using indicators. Examples of indicators are litmus paper, methyl orange, methyl red, bromothymoblueOne mole of a substance has a different number of particles as one mole of another substance.
O True
O False
Is the following compound symmetrical going across?
Answer:
Yes
Explanation:
A molecule has a center of symmetry when, for any atom in the molecule, an identical atom exists diametrically opposite this center an equal distance from it(Wikipedia).
A center of symmetry is said to exist in a molecule when reflection of all parts of the molecule through the center of symmetry produces an indistinguishable configuration(Housecroeft and Sharpe,2012)
Obviously, the Cl2 molecule has a center of symmetry, hence it is symmetrical. Reflection of the molecules through its center of symmetry produces an indistinguishable configuration.
Light is a form of _____? A. gamma rays B. sound C. energy D. radio waves
Answer:
Explanation:
Energy
The order is Solumedrol 3 mg/kg for a child weighing 20 kg. Solumedrol is available as 125 mg/2ml. How many ml will be given
Answer:
0.96mL must be given
Explanation:
First, we need to obtain the mass of Solumedrol required for the child by using its mass. Then, with this mass we can solve the volume that must be administered:
Mass of solumedrol required:
20kg * (3mg / kg) = 60mg of solumedrol are required.
Volume given:
60mg Solumedrol * (2mL / 125mg) =
0.96mL must be given
What happens at the anode in an electrolytic cell?
A. Turning an ion into an uncharged atom
B. Melting
C. Reduction
D. Oxidation
Answer:
D. Oxidation
Explanation:
In an electrolytic cell, oxidation (the loss of electrons) takes place at the anode. At the cathode reduction takes place.
A mnemonic technique that could be used is that the process that starts with a vowel (Oxidation) takes place at the place that also starts with a vowel (Anode).
calculate the molar mass of iron oxide
Explanation:
The molar mass of iron oxide is 159.7 ghope it helps you
Throwing a snowball during snowball fight is most like an example of
What is the change in air pressure over a given distance called? wind speed air pressure force factor air pressure gradient
The change in pressure over a given distance is defined as a pressure gradient. The strength of this pressure gradient determines how fast the wind moves from higher pressure toward lower pressure. A stronger pressure gradient will cause stronger winds, as shown in Figure 2. >> Balanced in the vertical by the force of gravity
Identify the characteristics of a good recrystallization solvent. Select one or more: Is not an organic liquid with a low boiling point. Dissolves a chemical sample well at high temperatures. Does not dissolve a chemical sample well at high temperatures. Does not dissolve a chemical sample well at low temperatures. Dissolves a chemical sample well at low temperatures.
Answer:
Dissolves a chemical sample well at high temperatures.
Does not dissolve a chemical sample well at low temperatures.
Explanation:
Recrystallization is a purification technique that involves mixing of an impure solid compound with a hot solvent leading to a saturated solution. As this solution cools, the compound to be purified becomes less soluble in the solvent, and pure crystals appear from the solution as the solution cools.
A good recrystallization solvent should
Not dissolve the compound that we want to purify at room temperature Dissolve the compound completely only at the solvent's boiling point Dissolve all the soluble impurities in the sample very well at room temperature.Have a fairly low boiling point such that its boiling point is lower than the melting point of the compound to be purified and evaporates easily when air-drying the sample.g line a) The emission line with the shortest wavelength. b) The absorption line with the shortest wavelength. c) The emission line with the lowest energy. d) The absorption line with the lowest energy. e) The emission line with the lowest frequency. f) The line corresponding to the ionization energy of hydrogen.
Answer:
a) 4
b) 2
c) 5
d) 2
e) 4
f) 3
Explanation:
The complete question is shown in the image attached to this answer.
We know that the shorter the wavelength, the greater the energy. The greatest energy and shortest wavelength among the emission lines is 4.
Applying the same argument as above, the greatest energy catapults the electron from energy level n=1 to n=4. This will corresponds to the shortest wavelength since energy is inversely proportional to wavelength.
Frequency is also inversely related to wavelength for two waves travelling at the same speed. Hence, the transition that corresponds to the highest energy and shortest wavelength in the emission spectrum will have the highest frequency.
The emission line with the lowest energy occurs when the electron moves from n=2 to n=1.
The ionization energy is the energy required to remove an electron from the hydrogen atom. It corresponds to the transition n=1 to n=∞
The compound sodium nitrate is a strong electrolyte. Write the transformation that occurs when solid sodium nitrate dissolves in water.
Answer and Explanation:
Since the compound sodium nitrate (NaNO₃) is a strong electrolyte, it dissociates completely into ions when is dissolved in water, as follows:
NaNO₃(s) → Na⁺(aq) + NO₃⁻(aq)
So, the solid compound produces the sodium cation (Na⁺) and the nitrate anion (NO₃-) in the aqueous medium.
An animal is an example of a/an-
A: tissue
B:cell type
C:organ
D:organism
Answer:
D
Explanation:
organism
Answer:
The answer should be organism
How many moles of NaHCO3 are there in a 3g tablet of Alka-Selzer?
Which of the following conditions does not affect equilibrium?
A. Particle Size
B. None of these
C. Concentration
D. Pressure
Answer:
B. None of these
Explanation:
Which of these is not a property of minerals?
A) Clevage
B) Fracture
C) Color
D) Smell
An arrow is fired at a target on a high wal. How does the energy change between the moment the arrow is fired and the
moment it hits the target?
O The potential energy and kinetic energy remain the same.
O The potential energy decreases as kinetic energy increases.
O The kinetic energy decreases as potential energy increases.
O The kinetic energy remains at zero, but potential energy increases.
Answer: answer is C on Edge
Explanation:
An arrow is fired at a target on a high wal. The energy change between the moment the arrow is fired and the moment it hits the target is the kinetic energy decreases as potential energy increases. The correct option is c.
What is energy change?Energy neither be created nor destroyed. It just only is transferred from one form to another form. This is called energy change. When any reactions happen, one form of energy is changed into another form.
There are many kinds of energy. These energies are kinetic energy, potential energy, gravitational energy, etc. Kinetic energy is the energy that is used when any work is done. Potential energy is the energy that is stored form of energy.
Therefore, the correct option is c, The kinetic energy decreases as potential energy increases.
To learn more about energy change, refer to the link:
https://brainly.com/question/22255429
#SPJ6