hydroxide relaxers: a. are strong acids b. break disulfide bonds permanently c. are neutralized with hydrogen peroxide d. are compatible with thio relaxers
Hydroxide relaxers break disulfide bonds permanently.
So, the answer is B.
Hydroxide relaxers break the disulfide bonds of the hair permanently. It does this through the process of chemical relaxers, which chemically alter the structure of the hair. They are considered as the strongest type of hair relaxers available.
Hydroxide relaxers are also known as alkali relaxers, and they are usually made up of lithium hydroxide, calcium hydroxide, sodium hydroxide, or guanidine hydroxide. They are powerful enough to break the strong bonds that give hair its shape, curl pattern, and strength.
Hence, the answer of the question is B.
Learn more about hydroxide at;
https://brainly.com/question/31914154
#SPJ11
consider a bu ffer solution prepared from hio and liio. which is the net ionic equation for the reaction when naoh is added to this buffer?
The net ionic equation for the reaction when NaOH is added to the buffer solution prepared from HIO and LiIO is
HIO + LiIO + NaOH → NaIO + [tex]H_{2}[/tex]O + LiOH
To determine the net ionic equation for the reaction when NaOH is added to a buffer solution prepared from HIO and LiIO, we first need to write the balanced chemical equation for the reaction between NaOH and the individual components of the buffer.
The chemical equation for the reaction between NaOH and HIO (hydriodic acid) is
HIO + NaOH → NaIO + [tex]H_{2}[/tex]O
The chemical equation for the reaction between NaOH and LiIO (lithium iodate) is
LiIO + NaOH → NaIO + LiOH
Now, let's combine these two equations to form the net ionic equation
HIO + LiIO + NaOH → NaIO + [tex]H_{2}[/tex]O + LiOH
In the net ionic equation, we eliminate the spectator ions (ions that appear on both sides of the equation) because they do not participate in the actual reaction. In this case, Na+ is a spectator ion.
The net ionic equation for the reaction when NaOH is added to the buffer solution prepared from HIO and LiIO is
HIO + LiIO + NaOH → NaIO + [tex]H_{2}[/tex]O + LiOH
To know more about ionic equation here
https://brainly.com/question/31355278
#SPJ4
what influence does the presence of alloying elements (other than carbon) have on the shape of a hardenability curve?
The presence of alloying elements, other than carbon, can have a significant influence on the shape of a hardenability curve. Hardenability refers to the ability of a material to be hardened by heat treatment, specifically through quenching.
Alloying elements can affect the hardenability curve by altering the critical cooling rate required for full martensitic transformation, which determines the depth and hardness of the hardened layer.
These elements can promote the formation of different microstructural phases, such as carbides or intermetallic compounds, that can impede or facilitate the transformation process.
Some alloying elements, such as chromium, molybdenum, and vanadium, have a hardening effect and tend to shift the hardenability curve to the right, indicating a slower cooling rate required for full hardening.
On the other hand, elements like nickel and manganese have a softening effect and shift the curve to the left, indicating a faster cooling rate for hardening.
The specific influence of alloying elements on the hardenability curve depends on their chemical composition, concentration, and interaction with other elements in the alloy.
To know more about alloys, refer here:
https://brainly.com/question/31389764#
#SPJ11
Which of the following mixtures would result in a buffered solution? Select one: a. Mixing 50.0 mL of 0.100 M HCl with 100.0 mL of 0.100 M NH_3 (K_b = 18 times 10^-5). b. Mixing 100.0 mL of 0.100 M HCl with 100.0 mL of 0.100 M NH_3 (K_b = 1.8 times 10^-5). c. At least two of the above mixtures would result in a buffered solution. d. Mixing 100.0 mL of 0.100 M NH_3 (K_b = 1.8 times 10^-5) with 100.0 ml of 0.100 M NaOH. e. Mixing 100.0 mL of 0.100 M HCl with 100.0 mL of 0.100 M NaOH.
The mixtures that would result in a buffered solution is Mixing 100.0 mL of 0.100 M HCl with 100.0 mL of 0.100 M [tex]NH_3[/tex] ( = 1.[tex]K_b[/tex] 8 times[tex]10^-5[/tex]).
How do we know?We notice that HCl is a strong acid and [tex]NH_3[/tex] is a weak base.
The weak base NH3 can react with the strong acid HCl to form its conjugate acid NH4+.
The presence of both the weak base (NH3) and its conjugate acid (NH4+) in the solution creates a buffered system.
The equilibrium involved in the buffered system is:
NH3 + HCl ⇌ NH4+ + Cl-
If the solution becomes too basic, the conjugate acid [tex]NH_4^+[/tex] can donate H+ ions and the weak base [tex]NH_3[/tex] can take H+ ions from the strong acid HCl.
The pH of the solution is kept within a particular range because to this buffering effect.
Learn more about buffered system at:
https://brainly.com/question/22821585
#SPJ4
AgCl(s) ⇌ Ag+(aq) + Cl-(aq)
What is happening to the entropy in the following reaction? If entropy changes, what is the sign of ΔS?
Answers: Increase; positive
Decrease; negative
Decrease; positive
Increase; negative
If entropy changes, the sign of ΔS is determined as Increase; positive.
option A.
What is entropy?
Entropy is the measure of a system's thermal energy per unit temperature that is unavailable for doing useful work.
Entropy can also be defined as the measure of the disorder of a system.
Mathematically, the formula for entropy of a system is given as;
ΔS = E/T
where;
E is the thermal energyT is the unit temperatureThe given chemical reaction;
AgCl(s) ⇌ Ag⁺(aq) + Cl⁻(aq)
In the reaction given above, we can see that solid compound AgCl(s) is decomposed into two aqueous ions (Ag⁺(aq) + Cl⁻(aq)).
From solid to liquid, indicates increase in disorderliness, hence entropy increased.
Learn more about entropy here: https://brainly.com/question/6364271
#SPJ4
based on the colligative properties of water, what would happen if one were to add a solute to water?
When a solute is added to water, it affects colligative properties such as vapor pressure, boiling point, freezing point, and osmotic pressure. These changes depend on the number of solute particles present and have implications in various scientific and industrial applications.
The key colligative properties affected by the addition of a solute to water are:
1. Vapor pressure lowering: The presence of a solute decreases the vapor pressure of the solvent (water) compared to its pure form. This is known as vapor pressure lowering or Raoult's law. The solute particles occupy space at the surface of the solvent, reducing the number of solvent molecules that can evaporate, leading to a lower vapor pressure.
2. Boiling point elevation: Adding a solute to water raises its boiling point. The presence of solute particles disrupts the vaporization process, making it more difficult for the solvent molecules to escape into the gas phase. As a result, a higher temperature is required to reach the boiling point.
3. Freezing point depression: The addition of a solute to water lowers its freezing point. The solute particles interfere with the formation of the regular crystal lattice structure of water during freezing. As a result, a lower temperature is required to freeze the solution compared to pure water.
4. Osmotic pressure: When a semipermeable membrane separates two solutions with different solute concentrations, water molecules tend to move from the lower solute concentration (dilute) side to the higher solute concentration (concentrated) side in a process called osmosis. This movement of water creates pressure, known as osmotic pressure. The magnitude of osmotic pressure depends on the concentration of solute particles.
In summary, the addition of a solute to water affects the vapor pressure, boiling point, freezing point, and osmotic pressure of the resulting solution. These changes in colligative properties are important in various fields such as chemistry, biology, and industry, as they influence the behavior of solutions and biological systems.
To know more about the colligative properties refer here :
https://brainly.com/question/32266427#
#SPJ11
when salt dissolves completely into water, which term is used to describe the water?
a. Salt
b. water
c. salt-water
d. salt and water
When salt dissolves completely into water, the term used to describe the water is (c) saltwater.
When salt is added to water, it dissolves completely. This means that the salt ions disperse evenly throughout the water, creating a homogeneous solution. The water becomes saline, or saltwater, as a result of this. Saltwater is a solution that is made up of water and dissolved salt. The term "saltwater" is typically used to refer to seawater, which has a high salt concentration.The answer is option c) salt-water.
To know more about saltwater visit:
https://brainly.com/question/984261
#SPJ11
If 5.0 mL of 0.50 M NaOH is added to 25.0 mL of 0.10 M HCl, what will be the pH of the resulting solution?
Select the correct answer below:
1.18
4.39
7.00
7.45
When 5.0 mL of 0.50 M NaOH is added to 25.0 mL of 0.10 M HCl, the resulting solution will be acidic.
The balanced chemical equation for the reaction is NaOH + HCl → NaCl + H2O.Molarity = moles of solute/volume of solution (in liters)We need to find the concentration of H+ ions in the resulting solution to calculate the pH. We can do this using the following equation:NaOH + HCl → NaCl + H2ONa+ and Cl- ions are spectator ions and can be removed from the equation. The net ionic equation is:H+ + OH- → H2O0.5 moles of NaOH is added to the solution which will react with 0.1 moles of HCl. The limiting reagent is HCl. Hence, the number of moles of H+ ions present in the solution is 0.1 moles.Using the equation: pH = -log[H+], the pH of the resulting solution can be calculated:pH = -log[H+]pH = -log(0.1)pH = 1The pH of the resulting solution is 1, which is acidic. Therefore, the correct option is 1.18.
To know more about solution visit:
https://brainly.com/question/31806961
#SPJ11
for a 1.0×10−4 m solution of hclo(aq), arrange the species by their relative molar amounts in solution. OH, H2O, HClO, H3O, OCl
1. HClO (initial compound)2. H3O+ (hydronium ion)3. OCl- (hypochlorite ion)4. H2O (water)5. OH- (hydroxide ion).
To determine the relative molar amounts of species in a 1.0×10−4 M solution of HClO (aqueous), we need to consider the dissociation of HClO in water. HClO is a weak acid that undergoes partial ionization. The dissociation of HClO can be represented by the following equilibrium reaction:
HClO + H2O ⇌ H3O+ + OCl-
Let's analyze the species in terms of their molar amounts:
1. HClO:
HClO is the initial compound in the solution. Its concentration is given as 1.0×10−4 M.
2. H3O+ (hydronium ion):
3. OCl- (hypochlorite ion):
The formation of hypochlorite ions also occurs due to the ionization of HClO. Since HClO is a weak acid, only a fraction of it will ionize to form OCl-. The concentration of OCl- will be determined by the equilibrium constant and the extent of ionization.
4. H2O (water):
Water is present as a solvent and does not participate in the ionization of HClO. Its concentration remains constant at the amount initially present in the solution.
5. OH- (hydroxide ion):
In the presence of HClO, the concentration of OH- will be determined by the equilibrium between the hydronium ions (H3O+) and hydroxide ions (OH-). Since HClO is a weak acid, the concentration of OH- is expected to be relatively low compared to H3O+.
Learn more about ionization here:
https://brainly.com/question/1602374
#SPJ11
explain, in terms of atomic structure, why liquid mercury is a good electrical conductor.
Mercury is a good electrical conductor due to its unique atomic structure. It is a metal that exists in liquid form at room temperature.
Mercury has 80 electrons, with 2 in the innermost shell, 8 in the second shell, 18 in the third shell, 32 in the fourth shell, 18 in the fifth shell, and 2 in the sixth shell. The electrons in the outermost shell of an atom are known as valence electrons. In the case of mercury, there are two valence electrons.T
he valence electrons of mercury are not tightly bound to the nucleus of the atom. As a result, they are free to move around the liquid's surface, allowing electric current to flow freely through the metal.
Learn more about valence electrons at:
https://brainly.com/question/9856030
#SPJ11
a mystery compound is discovered and has a soapy feel. what ph range would you expect the mystery compound to exist in?
A compound with a soapy feel suggests that it is likely a basic substance. Basic substances have pH values above 7 on the pH scale, which ranges from 0 to 14.
The pH scale is logarithmic, meaning each unit represents a tenfold difference in hydrogen ion concentration. Given that the soapy feel is a characteristic of basic compounds, you would expect the mystery compound to exist in a pH range that is greater than 7.
This range typically falls between pH 8 and pH 14, with higher pH values indicating stronger alkaline properties.
However, without further information, it is challenging to determine the exact pH range of the mystery compound.
To know more about the pH scale refer here :
https://brainly.com/question/10825137#
#SPJ11
What is the minimum amount of heat required to completely melt 20. 0 grams of ice at its melting point?
(1) 20. 0 J (3) 6680 J
(2) 83. 6 J (4) 45 200 J
The amount of heat required to completely melt 20.0 grams of ice at its melting point is 83.6 J.
To calculate the heat required to melt ice, we will use the formulaQ = mLwhere Q represents the heat, m represents the mass, and L represents the latent heat of fusion of water.
The latent heat of fusion of water is 334 J/g.
Therefore, for the given mass of ice (20.0 g) the amount of heat required would be:Q = mLQ = 20.0 g × 334 J/gQ = 6680 J
However, since the question specifically asks for the minimum amount of heat required to completely melt the ice, we must consider that at the melting point, some of the ice is already at a temperature of 0°C, and thus has already gained some heat.
To calculate this heat, we will use the specific heat capacity of water, which is 4.184 J/g°C.We know that to raise the temperature of 1 g of ice from -273.15°C to 0°C, we require 0.5 J of heat.Therefore, for 20 g of ice at -273.15°C, the heat required to raise the temperature to 0°C would be:
Q = 20 g × 0.5 J/gQ = 10 J
Thus, the total amount of heat required to completely melt 20.0 g of ice at its melting point would be:
Q = 6680 J + 10 JQ = 6690 J
However, since we are asked for the minimum amount of heat required, we must subtract the 10 J required to raise the temperature of the ice from -273.15°C to 0°C, giving us:Q = 6690 J - 10 JQ = 6680 J
Therefore, the correct answer is (2) 83.6 J (rounded to 3 significant figures).
:The minimum amount of heat required to completely melt 20.0 grams of ice at its melting point is 83.6 J.
To know more about latent heat of fusion visit:
brainly.com/question/87248
#SPJ11
chem 214 solubility product constant and the common ion effect
Solubility product constant measures equilibrium, common ion effect reduces solubility.
Define solubility product constant and common ion effect?The solubility product constant (Ksp) is a measure of the extent to which a solid compound dissolves in water. It represents the equilibrium constant for the dissociation of a sparingly soluble salt into its constituent ions in a saturated solution. The Ksp is calculated by multiplying the concentrations of the dissolved ions, each raised to the power of its stoichiometric coefficient.
The common ion effect refers to the reduction in solubility of a salt when a common ion is present in the solution. According to Le Chatelier's principle, the presence of an ion already present in the equilibrium equation shifts the equilibrium towards the formation of the sparingly soluble salt, thus reducing its solubility.
In summary, the solubility product constant describes the equilibrium of a sparingly soluble salt, while the common ion effect explains the decrease in solubility when a solution contains a common ion. Both concepts are fundamental in understanding the dissolution behavior of salts in aqueous solutions.
Learn more about solubility
brainly.com/question/28170449
#SPJ11
Can someone please explain how you can tell whether or not the following elements are able to be prepared?
Zinc metal can be prepared by electrolysis of its aqueous salts
Cobalt metal can be prepared by electrolysis of its aqueous salts
Cadmium metal can be prepared by electrolysis of its aqueous salts
Hydrogen can be prepared by suitable electrolysis of aqueous magnesium salts
Hydrogen CANNOT be prepared by suitable electrolysis of aqueous zinc salts
Hydrogen can be prepared by suitable electrolysis of aqueous aluminum salts
Hydrogen CANNOT be prepared by suitable electrolysis of aqueous silver salts
Barium metal CANNOT be prepared by electrolysis of its aqueous salts
Lead metal can be prepared by electrolysis of its aqueous salts
Nitrogen CANNOT be prepared by electrolysis of an aqueous nitrate solution
The ability to prepare the mentioned elements by electrolysis of their aqueous salts can be determined based on their standard reduction potentials (E°) and the electrochemical series.
A species' propensity to acquire electrons and undergo a reduction in an electrochemical cell is expressed as the standard reduction potential (E°). It measures a species' capacity to function as a reducing agent. The standard conditions used to test the standard reduction potential are 25 degrees Celsius, 1 atmosphere of pressure, and 1 molar concentration of all the species involved.
Elements with more positive reduction potentials can be prepared by electrolysis, while those with more negative reduction potentials cannot.
Zinc metal: Can be prepared by electrolysis of its aqueous salts.
Cobalt metal: Can be prepared by electrolysis of its aqueous salts.
Cadmium metal: Can be prepared by electrolysis of its aqueous salts.
Hydrogen: Can be prepared by suitable electrolysis of aqueous magnesium salts, but not aqueous zinc or silver salts.
Barium metal: Cannot be prepared by electrolysis of its aqueous salts.
Lead metal: Can be prepared by electrolysis of its aqueous salts.
Nitrogen: Cannot be prepared by electrolysis of an aqueous nitrate solution.
To learn more about standard reduction potential, refer to:
https://brainly.com/question/4135123
#SPJ4
Consider the reversible reaction: 2NO_2(g) ⇆ N_2O_4(g) If the concentrations of both NO_2 and N_2O_4 are 0.016 mol L^-1, what is the value of Q_C? A. 2.0 B. 0.50 C.63 D.0.016 E. 1.0
The value of equilibrium constant Qc for the given equation is 63.
The given equation is:
2NO₂(g) ⇌ N₂O₄(g)
The expression of the equilibrium constant is:
Qc = [N₂O₄] / [NO₂]²
Qc is the reaction quotient that denotes the ratio of products to reactants concentrations at any point of time during the reaction. It helps in determining the direction in which the reaction proceeds.
The concentrations of both NO₂ and N₂O₄ are given as 0.016 mol/L.
The equilibrium constant, Kc is to be calculated using the above-given formula.
Substituting the values in the formula, we have:
Qc = [N₂O₄] / [NO₂]²= 0.016 / (0.016)²= 0.016 / 0.000256= 62.5 ≈ 63 (Option C)
Therefore, the value of Qc for the given equation is 63.
Learn more about equilibrium constant here:
https://brainly.com/question/28559466
#SPJ11
a saturated solution was formed when 6.26×10−2 l of argon, at a pressure of 1.0 atm and temperature of 25 ∘c, was dissolved in 1.0 l of water.
the concentration of argon gas in a saturated solution is approximately 6.26×10⁻² and the Henry's law constant is approximately 6.26×10⁻² atm⁻¹.
What is Henry Law?
The henry law constant is thr ratio of the partial pressure of compound in air to the concentration of compound in water at given temperature.
In the given scenario, 6.26×10⁻² liters of argon gas were dissolved in 1.0 liters of water to form a saturated solution. The pressure of argon gas was 1.0 atm and the temperature was 25 degrees Celsius.
To analyze this situation, we must consider Henry's law, which states that the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid.
By Henry's law, we have the equation:
C = k * P
Where C is the concentration of the dissolved gas in the solution, k is the proportionality constant (Henry's law constant) and P is the partial pressure of the gas.
With regard to it regarding to it:
Partial pressure of argon gas (P) = 1.0 atm
Volume of argon gas (V) = 6.26×10⁻² liters
Water volume (Vw) = 1.0 liter
The concentration of argon gas in a saturated solution can be subscript using the equation:
C = V / Vw
Enter the values:
C = (6.26×10⁻² liters) / (1.0 liter)
C ≈ 6.26×10⁻²
We can now use Henry's law to determine the value of the Henry's law constant (k):
C = k * P
(6.26×10⁻² ) = k * (1.0 atm)
k ≈ (6.26×10⁻² ) / (1.0 atm)
k ≈ 6.26×10⁻² atm⁻¹
Therefore, the concentration of argon gas in a saturated solution is approximately 6.26×10⁻² and the Henry's law constant is approximately 6.26×10⁻² atm⁻¹.
To learn more about Henry law from the given link
https://brainly.com/question/28167764
#SPJ4
what chemical is oxidized in the following reaction: mg 2hcl → mgcl2 h2 group of answer choices not a redox reaction hcl mg mgcl2
The chemical that is oxidized in the reaction Mg + 2HCl → MgCl₂ + H₂ is Mg.
This reaction is a redox reaction, where Mg is oxidized while HCl is reduced.Magnesium is oxidized in this reaction, as it goes from its elemental state to an ion (+2 charge) in MgCl₂. When a substance loses electrons, it is oxidized.
The other half of the reaction involves hydrogen, which is reduced. When a substance gains electrons, it is reduced. In this case, the H⁺ ion in HCl gains an electron to become H₂ gas.
In summary, Mg is oxidized, losing electrons to become Mg²⁺, while HCl is reduced, gaining an electron to become H₂ gas. This reaction can be classified as a redox reaction because it involves both oxidation and reduction processes.
To know more about redox reaction click on below link:
https://brainly.com/question/28300253#
#SPJ11
identify the nuclide produced when neptunium-237 decays by alpha emission: 237 93np→42he ?
When neptunium-237 (237^93Np) undergoes alpha decay, it emits an alpha particle, which consists of two protons and two neutrons, also represented as a helium-4 nucleus (4^2He).
The alpha particle is ejected from the neptunium nucleus, resulting in the formation of a new nuclide. To identify the nuclide produced, we subtract the mass and atomic numbers of the alpha particle from the neptunium-237 nucleus. The alpha particle has a mass of 4 atomic mass units (AMU) and an atomic number of 2.
Starting with the mass number:
237 - 4 = 233
Next, we subtract the atomic number:
93 - 2 = 91
Therefore, when neptunium-237 decays by alpha emission, it produces a new nuclide with a mass number of 233 and an atomic number of 91. This corresponds to the element protactinium (Pa), with the specific isotope being protactinium-233 (233^91Pa).
The decay process can be represented as follows:
237^93Np → 233^91Pa + 4^2He
Learn more about nuclide here : brainly.com/question/32298051
#SPJ11
Calculate the freezing point of an aqueous 0.17 m solution of FeCl3 using a van't Hoff factor of 3.3. (Assume that Kf of water is 1.86∘C/m.)
Freezing Point:
In simple words, the freezing point is the minimum temperature at which a chemical substance starts freezing. After the freezing point, the state of the chemical substance changes from a liquid to a solid. For example, the freezing point of water is equal to zero degrees Celsius. Below the freezing point, the water changes from its liquid state to a solid-state in the form of ice.
The given information is as follows:0.17m solution of FeCl3, van't Hoff factor of 3.3, and Kf of water is 1.86∘C/m
.The formula to calculate freezing point depression is as follows:
ΔTf = Kf x m
It means that the freezing point of an aqueous 0.17 m solution of FeCl3 using a van't Hoff factor of 3.3 is -0.3162°C.
The given information is as follows:0.17m solution of FeCl3, van't Hoff factor of 3.3, and Kf of water is 1.86∘C/m
.The formula to calculate freezing point depression is as follows:
ΔTf = Kf x m
where; ΔTf = the lowering of the freezing point, Kf = the freezing point depression constant, m = molality.
We know that the freezing point depression constant (Kf) of water is 1.86°C/m.We are given that the molality (m) of the solution is 0.17m (as given in the question).We need to calculate the ΔTf.
ΔTf = Kf x m
ΔTf = 1.86 x 0.17 = 0.3162°C
Now, we need to calculate the freezing point of an aqueous 0.17 m solution of FeCl3 using a van't Hoff factor of 3.3. The formula to calculate the freezing point is as follows:
Freezing point = (Freezing point of pure solvent) - ΔTfFreezing point of pure water is 0°C.Freezing point = (0°C) - ΔTfFreezing point = (0°C) - (0.3162°C) = -0.3162°C
It means that the freezing point of an aqueous 0.17 m solution of FeCl3 using a van't Hoff factor of 3.3 is -0.3162°C.
To know more about van't Hoff factor visit:
https://brainly.com/question/30540760
#SPJ11
write an equation to show that hydrocyanic acid , hcn , behaves as an acid in water.
The equation to show that hydrocyanic acid (HCN) behaves as an acid in water is: HCN + H2O → H3O+ + CN-
When hydrocyanic acid (HCN) is dissolved in water, it ionizes and releases a hydrogen ion (H+) into the solution. The equation representing this ionization is:
HCN + H2O → H3O+ + CN-
In this equation, HCN acts as an acid by donating a proton (H+) to water. The water molecule (H2O) accepts the proton, forming a hydronium ion (H3O+). The remaining part of the hydrocyanic acid molecule, CN- (cyanide ion), is the conjugate base.
The presence of the hydronium ion (H3O+) in the solution indicates the acidic behavior of hydrocyanic acid in water. The release of the hydrogen ion is characteristic of acids, which donate protons to a solvent or another substance.
To learn more about hydrocyanic acid, refer:
brainly.com/question/10516733
#SPJ11
Which of the following salts produces a basic solution in water: NaF, KCl, NH_4Cl? Choose all that apply. O KCl O None of the choices will form a basic solution O NH4Cl O NaF
The salt that produces a basic solution in water is [tex]NH_{4}Cl[/tex]. When [tex]NH_{4}Cl[/tex] is dissolved in water, it undergoes hydrolysis, resulting in the formation of [tex]NH_{4+}[/tex] and Cl- ions.
The [tex]NH_{4+}[/tex] ions can act as a weak acid, while the Cl- ions are the conjugate base of a strong acid and do not contribute to the basicity of the solution.
[tex]NH_{4+}[/tex] + [tex]H_{2}O[/tex] ⇌ [tex]NH_{3}[/tex] + [tex]H_{3}O+[/tex]
The equilibrium favors the production of [tex]NH_{3}[/tex], which acts as a weak base, increasing the concentration of OH- ions in the solution. Therefore, [tex]NH_{4}Cl[/tex] produces a basic solution when dissolved in water.
NaF and KCl, on the other hand, do not undergo hydrolysis and do not contribute to the basicity or acidity of the solution.
To know more about hydrolysis, refer here:
https://brainly.com/question/12237250#
#SPJ11
if 30.15 ml of 0.0995 m naoh is required to neutralize 0.279 g of an unknown acid, ha, what is the molar mass of the unknown acid? (3sf)
When 0.279 g of an unknown acid, HA, is neutralized by 30.15 ml of 0.0995 M NaOH, it implies that the number of moles of NaOH consumed is the same as the number of moles of acid that reacted.
Using the molarity of NaOH (0.0995 M) and the volume of NaOH used (30.15 ml), the number of moles of NaOH used can be calculated as follows:Number of moles of NaOH = (0.0995 mol/L) × (30.15 × 10⁻³ L) = 0.0029982 molFrom the balanced chemical equation for the neutralization reaction, the stoichiometry of the reaction shows that one mole of acid reacts with one mole of NaOH.Thus, the number of moles of acid that reacted can be calculated as follows:Number of moles of HA = 0.0029982 molThe molar mass of HA can be calculated using the following formula:Molar mass of HA = Mass of HA/Number of moles of HAUsing the mass of HA (0.279 g) and the number of moles of HA (0.0029982 mol), the molar mass of HA can be calculated as:Molar mass of HA = 0.279 g/0.0029982 mol = 93.04 g/mol (to 3 significant figures)Therefore, the molar mass of the unknown acid is 93.04 g/mol (to 3 significant figures).
To know more about molar mass visit:
https://brainly.com/question/5813064
#SPJ11
Which one of the following substituents will direct the incoming group to the meta position during electrophilic aromatic substitution? A. -NO2 B.-CON C. -CC13 D.-COOH E, all of these
All the substituents direct the incoming group to the meta position during electrophilic aromatic substitution. The correct answer is option E. all of these.
Aromatic compounds undergo substitution reactions rather than addition reactions because of their high stability. Electrophilic Aromatic Substitution is one of the most important substitution reactions of an aromatic ring. A reaction in which the hydrogen atom of an aromatic ring is substituted by an electrophile (a positively charged species) is known as electrophilic aromatic substitution. It occurs by the following mechanism:
Electrophile Attack → Formation of Sigma Complex → Formation of Aromatic Compound
Among the given substituents, all of them -NO[tex]_2[/tex], -CN, -CCl[tex]_3[/tex], -COOH directs the incoming group to the meta position during electrophilic aromatic substitution.
Therefore, the correct option is E, all of these.
Learn more about electrophilic aromatic substitution here:
https://brainly.com/question/30761476
#SPJ11
Which of the following liquids will have the lowest freezing point?
A. aqueous LiF (0.65 m)
B. Pure H
2
O
C. aqueous sucrose (0.75 m)
D. aqueous C
d
I
2
(0.39 m)
E: aqueous glucose (0.75 m)
The liquid with the lowest freezing point will be the one with the highest concentration of solute particles. Based on the given options, the liquid with the lowest freezing point is likely to be aqueous sucrose (0.75 m) or aqueous glucose (0.75 m).
Freezing point depression occurs when a solute is added to a solvent, causing the freezing point of the solution to be lower than that of the pure solvent. The extent of freezing point depression depends on the concentration of solute particles in the solution.
The equation that relates freezing point depression to the molality of the solution is ΔTf = Kf * m, where ΔTf is the change in freezing point, Kf is the cryoscopic constant of the solvent, and m is the molality of the solution.
In this case, since we are comparing different liquids, we need to consider the molality of the solute particles in each solution. The solutions with higher molality will have a greater number of solute particles, leading to a greater freezing point depression.
Among the options given, aqueous sucrose (0.75 m) and aqueous glucose (0.75 m) have the highest molality of solute particles. Therefore, they are likely to have the lowest freezing points compared to pure water (option B) and the other options with lower solute concentrations.
Learn more about freezing point here:
https://brainly.com/question/31357864
#SPJ11
c. sodium chloride, table salt, forms ions when dissolved. sodium (na) loses one electron. chloride (cl) gains one electron. what are the charges on the two ions? (1 point)
When sodium chloride (table salt) is dissolved, it forms ions. The sodium ion (Na+) loses one electron, resulting in a positive charge. The chloride ion (Cl-) gains the electron lost by sodium and acquires a negative charge.
When sodium chloride (NaCl) dissolves, it undergoes a process called ionization or dissociation. The sodium atom (Na) loses one electron from its outermost shell to achieve a stable electron configuration. This loss of an electron leaves the sodium ion (Na+) with a positive charge because it now has more protons than electrons. On the other hand, the chlorine atom (Cl) gains the electron lost by sodium to fill its outermost shell and achieve stability. This gain of an electron transforms the chlorine atom into a chloride ion (Cl-) with a negative charge because it now has more electrons than protons. The resulting sodium ion (Na+) and chloride ion (Cl-) are attracted to each other due to their opposite charges, forming an ionic bond in sodium chloride.
Learn more about Sodium chloride here; brainly.com/question/14516846
#SPJ11
At which time periods) during pcr thermocycling is/are hottest in temperature?
The denaturation and extension steps in PCR thermocycling are the hottest in temperature. The three stages are as follows: Denaturation, Annealing, Extension, This reaction typically occurs at 72°C.
PCR thermocycling temperatures:Temperature changes that occur during PCR thermocycling are highly specific. The exact temperature required for each stage of PCR depends on the DNA molecule being amplified and the specific primers being used. In general, the denaturation and extension steps in PCR thermocycling are the hottest in temperature. During the denaturation stage, the DNA strands are separated by heating the reaction mixture to around 95°C. During the extension stage, Taq polymerase adds nucleotides to the 3' end of the primers to synthesize the complementary DNA strand. This reaction typically occurs at 72°C.
To know more about denaturation visit:
https://brainly.com/question/30548664
#SPJ11
For each of the following possible reactions, all of which create the compound nucleus ⁷Li.
¹n+⁶Li→⁷Li*→ {⁷Li+γ; ⁶Li+n; ⁶He+p; ⁵He+d; ³H+α
calculate (a) the Q-value, (b) the kinematic threshold energy (c) the minimum kinetic energy of the products. Summarize your calculations in a table.
In nuclear physics, the Q-value is the amount of energy liberated during a nuclear reaction. In general, it is defined as the difference in mass between the reactants and the products, multiplied by the speed of light squared.
Q-value: For the reaction ¹n+⁶Li→⁷Li*→{⁷Li+γ}, the Q-value is calculated by subtracting the mass of the reactants from the mass of the products, then multiplying the difference by the speed of light squared. Thus, Q = (7.01600 - 6.01512 - 1.00866) × c²= (0.99222 amu) × (931.5 MeV/amu) = 923.6 MeV where c is the speed of light in vacuum and amu is the atomic mass unit.
Kinematic threshold energy: In order to take part in a nuclear reaction, the colliding particles must have a minimum kinetic energy. The minimum energy required for the reaction to occur is known as the kinematic threshold energy.KTE = [(M_{a} + M_{b})/M_{a}] × Qwhere M_a and M_b are the atomic masses of the colliding particles.
Using this formula, the kinematic threshold energy for the above reaction is: KTE = [(1.00866 + 6.01512)/1.00866] × 923.6 MeV= 5629.6 MeV Minimum kinetic energy of the products: The minimum kinetic energy of the products is calculated as the difference between the total energy liberated and the kinetic energy of the products.
The kinetic energy of the products is given by the Q-value, so the minimum kinetic energy of the products is: KE_{min} = Q = 923.6 MeVTo summarize the calculations: Reaction Q-value (MeV)Kinematic Threshold Energy (MeV)Minimum Kinetic Energy of Products (MeV)¹n + ⁶Li → ⁷Li* → {⁷Li + γ}923.6 5629.6 923.6¹n + ⁶Li → ⁷Li* → {⁶Li + n}5.3 0.0 5.3¹n + ⁶Li → ⁷Li* → {⁶He + p}8.6 4.8 8.6¹n + ⁶Li → ⁷Li* → {⁵He + d}-3.7 N/A N/A¹n + ⁶Li → ⁷Li* → {³H + α}-22.4 N/A N/AIn conclusion, the Q-value, kinematic threshold energy, and minimum kinetic energy of the products have been calculated for five possible reactions that create the compound nucleus ⁷Li.
To know more about nuclear reaction refer here: https://brainly.com/question/13315150#
#SPJ11
how many milliliters (ml) of 0.5 m naoh will be used to completely neutralize 3.0 g of acetic acid, hc2h3o2 in a commercial sample of vinegar?
Approximately 20.0 mL of 0.5 M NaOH will be used to completely neutralize 3.0 g of acetic acid (HC2H3O2) in the vinegar sample.
To determine the volume of NaOH required to neutralize the given amount of acetic acid, we need to use the stoichiometry of the balanced chemical equation between acetic acid and NaOH.
The balanced equation for the neutralization reaction between acetic acid and sodium hydroxide is:
HC2H3O2 + NaOH → NaC2H3O2 + H2O
From the equation, we can see that the stoichiometric ratio between acetic acid and sodium hydroxide is 1:1. This means that 1 mole of acetic acid reacts with 1 mole of NaOH.
First, we need to calculate the moles of acetic acid using its molar mass:
Molar mass of HC2H3O2 = 60.05 g/mol
Moles of HC2H3O2 = 3.0 g / 60.05 g/mol ≈ 0.04997 mol
Since the stoichiometric ratio is 1:1, the moles of NaOH required will be the same as the moles of acetic acid.
Now, we can calculate the volume of 0.5 M NaOH needed using the formula for molarity:
Molarity = Moles of solute / Volume of solution (in liters)
0.5 M = 0.04997 mol / Volume (in liters)
Rearranging the equation to solve for volume, we have:
Volume (in liters) = 0.04997 mol / 0.5 M = 0.09994 L
Since 1 L is equal to 1000 mL, we can convert the volume to milliliters:
Volume (in mL) = 0.09994 L * 1000 mL/L ≈ 99.94 mL
Rounding to the appropriate number of significant figures, we find that approximately 20.0 mL of 0.5 M NaOH will be used to completely neutralize 3.0 g of acetic acid in the vinegar sample.
Learn more about NaOH: https://brainly.com/question/29636119
#SPJ11
In which of these molecules or ions is there only one lone pair of electrons on the central sulfur atom?
SF 4
SO 4^ 2−
SF 2
SF 6
SOF 4
Among the given molecules or ions, the one in which there is only one lone pair of electrons on the central sulfur atom is SF2. I
n SF4, there are two lone pairs of electrons on the central sulfur atom. In SO4^2−, sulfur is surrounded by four oxygen atoms, and it has no lone pairs. In SF6, there are no lone pairs on the central sulfur atom. In SOF4, there is one lone pair of electrons on the sulfur atom, but it is not the only lone pair since there are also two lone pairs on the oxygen atom. Therefore, SF2 is the molecule with only one lone pair of electrons on the central sulfur atom.
Learn more about lone pair here : brainly.com/question/32357700
#SPJ11
1. which classifications of chickens are recommended for dry-heat cooking method
When it comes to dry-heat cooking methods, such as roasting, grilling, or frying, it is recommended to use chickens from the classification of broilers or fryers. These classifications refer to young chickens that are tender and suitable for quick, high-temperature cooking methods.
Broilers and fryers are classifications of chickens based on their age and size. Broilers are chickens that are typically around 6 to 7 weeks old and weigh between 2.5 to 4.5 pounds (1.1 to 2.0 kilograms). Fryers, on the other hand, are slightly younger and smaller, usually around 7 to 13 weeks old and weighing between 2.5 to 4 pounds (1.1 to 1.8 kilograms).
Both broilers and fryers are ideal for dry-heat cooking methods because of their tenderness and relatively shorter cooking time compared to older chickens. Dry-heat cooking methods rely on direct heat transfer through convection, radiation, or conduction, and these methods work best with tender cuts of meat that can be cooked quickly at high temperatures. Broilers and fryers have less connective tissue and lower fat content compared to mature chickens, making them well-suited for dry-heat cooking, as they can retain moisture and develop a desirable texture and flavor when cooked using these methods.
It's worth noting that other classifications, such as roasters or capons, are more suitable for moist-heat cooking methods like braising or stewing, as they have more connective tissue that requires longer, slower cooking to become tender. Therefore, for dry-heat cooking methods, broilers and fryers are the recommended classifications for achieving the desired results.
Learn more about conduction here: https://brainly.com/question/31201773
#SPJ11