Answer:
C
Explanation:
C
A negative charge of 2 C and a positive charge of 3 C are separated by 80 m. What is the force between the two charges?
Answer:
6
Explanation: i looked this up.
According to the Coloumb's law, the force is obtained from the charges and the distance between them is 8.4375×10⁶ N. This force results in the attractive force.
What is Coloumb's law?Coloumb's law states the relation between the charges and the distance between the charges. Coloumb's law states that the Force is directly proportional to the product of charges and inversely proprotional to the square of distance between them.
The Coloumb's law gives the force of attraction or repulsion between the charged bodies. Two charges with positive or negative charges repels each other. One positive and one negative charge attract each other.
The force increases with the product of charges increases as product of charges and force are directly proprotional. The force decreases with the increase in distance of seperation and vice-versa. The SI unit of force is newton (N).
The Coloumb's law is:
F = k (q₁×q₂ / r²)
k is the constant of proportionality and is equal to 9×10⁹ N.m²/C².
q₁, q₂ = charges
r² = distance of seperation of charges.
From the given,
q₁ = -2C ( negative sign represents the negative charge)
q₂ = +3C ( + sign represents the positive charge)
r² = 80 m ( distance between the charges)
F = k (q₁×q₂ / r²)
= 9×10⁹×2×3 / 80×80
= 54×10⁹ / 6400
= 8437500 N
F = 8.4375×10⁶ N
There is the presesnce of both positive and negative charges, hence it results in the attractive force. Hence, the force F between two charges separated by 80m is 8.4375×10⁶ N.
To learn more about the Coloumb's law:
https://brainly.com/question/14519256
#SPJ2
A community plans to build a facility to convert solar radiation to electrical power. The community requires 2.20 MW of power, and the system to be installed has an efficiency of 30.0% (that is, 30.0% of the solar energy incident on the surface is converted to useful energy that can power the community). Assuming sunlight has a constant intensity of 1 020 W/m2, what must be the effective area of a perfectly absorbing surface used in such an installation
Answer:
The answer is "[tex]\bold{7.18 \times 10^3 \ m^2}[/tex]".
Explanation:
The efficiency system:
[tex]\eta =\frac{P_{req}}{P} \times 10\\\\P =\frac{P_{req}}{\eta} \times 10\\\\[/tex]
[tex]=(\frac{2.20 \times 10^6 \ W}{30})\times 100\\\\=(\frac{220 \times 10^6 \ W}{30})\\\\=(\frac{22 \times 10^6 \ W}{3})\\\\=7.33 \times 10^6 \ W[/tex]
Using formula:
[tex]A=\frac{P}{I}[/tex]
Effective area:
[tex]A= \frac{7.33 \times 10^6 \ W}{1020\ \frac{W}{m^2}}\\\\[/tex]
[tex]=\frac{7.33 \times 10^6 }{1020}\ m^2 \\\\ =0.0071862 \times 10^6 \ m^2 \\\\=7.1862 \times 10^3 \ m^2 \\\\[/tex]
A centroid is an object's geometric center. For an object of uniform composition, its centroid is also its center of mass. Often the centroid of a complex composite body is found by, first, cutting the body into regular shaped segments, and then by calculating the weighted average of the segments' centroids.An object is made from a uniform piece of sheet metal. The object has dimensions of a
This question is not complete, the complete question is;
A centroid is an object's geometric center. For an object of uniform composition, its centroid is also its center of mass. Often the centroid of a complex composite body is found by, first, cutting the body into regular shaped segments, and then by calculating the weighted average of the segments' centroids.
An object is made from a uniform piece of sheet metal. The object has dimensions of α = 1.50 ft, where α is the diameter the semi-circle, b= 3.51 ft, and c = 2.20 ft. A hole with diameter d = 0.500 ft is centered at ( 1.21, 0.750 ).
Find x", y", the coordinates of the body's centroid.
Answer:
x" = 1.4857 ft
y" = 0.668 ft
Explanation:
Given the data in the question and as illustrated in the second image below;
from the image;
BC² = DC² - BD²
BC² = 2.2² - 1.5² = 4.84 - 2.25 = 2.59
BC = √2.59 = 1.61 ft
AB = 3.51 ft - 0.75 ft - 1.61 ft = 1.15 ft
so;
A₁ = [tex]\frac{1}{2}[/tex] × 1.51 ft × 1.61 ft = 1.2075 ft²
x₁ = 0.75 + 1.15 + [tex]\frac{1}{3}[/tex](1.61 ft) = 2.44 ft
y₁ = [tex]\frac{1}{3}[/tex](1.5 ft) = 0.5 ft
A₂ = 1.15 ft × 1.5 ft = 1.725 ft²
x₂ = 0.75 ft + ( 1.15/2 )ft = 1.325 ft
y₂ = ( 1.5/2 ) ft = 0.75 ft
A₃ = [tex]\frac{\pi }{2}[/tex](0.75 ft)² = 0.88 ft²
x₃ = 0.75 - ([tex]\frac{4 }{3\pi }[/tex](0.75 ft)) = 0.43 ft
y₃ = 0.75 ft
diameter d = 0.5 ft and centered at ( 1.21, 0.750 )
A₄ = [tex]\frac{\pi }{4}[/tex]( d )² =
x₄ = 1.21 ft
y₄ = 0.75 ft
Thus;
x" = [tex]\frac{A_1 x_1 + A_2 x_2 + A_3 x_3 - A_4x_4 }{A_1+A_2+A_3-A_4}[/tex]
so we substitute
x" = [tex]\frac{(1.2075X2.44) + (1.725 X 1.325) + (0.88X0.43) - (0.196 X 1.21 )}{ ( 1.2075 + 1.725 + 0.88 - 0.196 )}[/tex]
x" = [tex]\frac{ (2.9463 + 2.285625 + 0.3784 - 0.23716)}{ 3.6165 }[/tex]
x" = 5.373165 / 3.6165
x" = 1.4857 ft
y" = [tex]\frac{A_1 y_1 + A_2 y_2 + A_3 y_3 - A_4y_4 }{A_1+A_2+A_3-A_4}[/tex]
so we substitute
y" = [tex]\frac{(1.2075X0.5) + (1.725 X 0.75) + (0.88X0.75) - (0.196 X 0.75 )}{ ( 1.2075 + 1.725 + 0.88 - 0.196 )}[/tex]
y" = [tex]\frac{ (0.60375 + 1.29375 + 0.66 - 0.14112)}{ 3.6165 }[/tex]
y" = 2.41638 / 3.6165
y" = 0.668 ft
Therefore,
x" = 1.4857 ft
y" = 0.668 ft
8. What is the mass and charge of a proton?
A. 1 amu, no charge
B. 1 amu, charge of +1
C. Mass of O, charge of -1
D. None of the above
Two risks of exposure to High levels of UV radiation
Answer:
uv radiation cause cancer
uv radiation effect our eyes
Answer:
you can get
1:skin cancer
2:eye damage
3:skin damage
4:immune system suppression
choose which two u want
hope this helped
:)
Explanation:
how do stocks and bonds differ
Answer:
Explanation:
Stocks give you partial ownership in a corporation, while bonds are a loan from you to a company or government. The biggest difference between them is how they generate profit: stocks must appreciate in value and be sold later on the stock market, while most bonds pay fixed interest over time.
Answer:
Stocks give you partial ownership in a corporation, while bonds are a loan from you to a company or government. The biggest difference between them is how they generate profit: stocks must appreciate in value and be sold later on the stock market, while most bonds pay fixed interest over time.
Explanation:
None
Objects A and B, of mass M and 2M respectively, are each pushed a distance d straight up an inclined plane by a force F parallel to the plane. The coefficient of kinetic friction between each mass and the plane has the same value μ.k At the highest point is:______
a. KEA > KEB
b. KEA = KEB
c. KEA < KEB
d. The work done by F on A is greater than the work done by F on B.
e. The work done by F on A is less than the work done by F on B.
Answer:
The correct answer is option (A) that is KEA > KEB .
Explanation:
Let us calculate -
If the object is straighten up and inclined plane , the work done is
[tex]W=F_d- F_f_r_id-F_gh[/tex]
[tex]W=F_d-\mu_kmgdcos\theta-mgdsin\theta[/tex]
The change in kinetic energy is ,
[tex]\Delta K=\frac{1}{2}mv^2-\frac{1}{2}m\nu_0^2[/tex]
At the top of the inclined plane , the velocity is zero
So,
[tex]\Delta K=\frac{1}{2} m(0)^2-\frac{1}{2}m\nu_0^2[/tex]
[tex]\Delta KE=-\frac{1}{2}m\nu_0^2[/tex]
From the work energy theorem , we have [tex]W=-\Delta K[/tex] in case of friction , so
[tex]\frac{1}{2}m\nu_0^2=Fd-\mu_kmgdcos\theta-mgdsin\theta[/tex]
[tex]KE=Fd-\mu_kmgdcos\theta-mgdsin\theta[/tex]
For object A-
[tex]KE_A=Fd-\mu_kmgdcos\theta-mgdsin\theta[/tex]
For object B
[tex]KE_B= Fd -2\mu_kMgdcos\theta-2Mgdsin\theta[/tex]
[tex]KE_B= Fd -2(\mu_kMgdcos\theta-Mgdsin\theta)[/tex]
Thus , larger mass is going to mean less total work and a lower kinetic energy .
From the above results , we get
[tex]KE_A >KE_B[/tex]
Therefore , option A is correct .
A ball bounces changing velocity from vi=15m/s[D] to vf=15m/s[U] in t=0.01s. The balls acceleration is *
A) 0
B) 30m/s/s
C) 3000m/s/s
D) 0.3m/s/s
Answer:
Option (A) is correct
Explanation:
a= (vf-vi)/ t
put the values
hence,
a= ( 15-15)/0.01
a=0
Urgent!!!!! A student heated 235 g of water in a beaker until the water reached 100°C. The student removed the beaker from the heat and placed the beaker on a counter in a 23°C room. The student recorded the temperature of the water every 4 minutes for 20 minutes. The data are shown in the table. Estimate the average temperature of the air in the room at 20 min. explain your answer.
The average temperature of the air in the room at 20 min is 23°C.
What is temperature?Temperature is the degree of hotness or coldness of the object.
A student heated 235 g of water in a beaker until the water reached 100°C. The student removed the beaker from the heat and placed the beaker on a counter in a 23°C room. The student recorded the temperature of the water every 4 minutes for 20 minutes.
The surrounding is vast, its temperature does not get affected by small amount of water. So, the temperature of air remains constant.
Thus, the average temperature of the air in the room at 20 min is 23°C.
Learn more about temperature.
https://brainly.com/question/11464844
#SPJ2
Plutonium-238 has a half life of 87.7 years. What percentage of a 5 kilogram (kg) sample remains after 50 years?
Answer:
i dont know but i should know try g o o g l e
Explanation:
An object is pushed with a force of 400 N for 20 meters; what is the work done on the object? Solve using W=F*d
Answer:
800joules
Explanation:
work is measured in joules
In an elastic collision between a moving 10-kg mass and a stationary 10-kg mass half the momentum is transferred to the stationary mass. In this situation the total kinetic energy after the collision is less than it was before the collision. Where did the kinetic energy go?
A) The kinetic energy was destroyed during the collision.
B) Some of the kinetic energy was turned into momentum during the collision.
C) Some of the kinetic energy was turned into heat or used to deform the masses.
D) Some of the kinetic energy was turned into potential energy during the collision.
Answer: C
Explanation:
USAtestprep
Transverse thrusters are used to make large ships fully maneuverable at low speeds without tugboat assistance. A transverse thruster consists of a propeller mounted in a duct; the unit is then mounted below the waterline in the bow or stern of the ship. The duct runs completely across the ship. Calculate the thrust developed by a 1900 kW unit supplied to the propeller if the duct is 2.6 m in diameter and the ship is stationary.
Answer:
Thrust developed = 212.3373 kN
Explanation:
Assuming the ship is stationary
Determine the Thrust developed
power supplied to the propeller ( Punit ) = 1900 KW
Duct distance ( diameter ; D ) = 2.6 m
first step : calculate the area of the duct
A = π/4 * D^2
= π/4 * ( 2.6)^2 = 5.3092 m^2
next : calculate the velocity of propeller
Punit = (A*v*β ) / 2 * V^2 ( assuming β = 999 kg/m^3 ) also given V1 = 0
∴V^3 = Punit * 2 / A*β
= ( 1900 * 10^3 * 2 ) / ( 5.3092 * 999 )
hence V2 = 8.9480 m/s
Finally determine the thrust developed
F = Punit / V2
= (1900 * 10^3) / ( 8.9480)
= 212.3373 kN
1. A train is moving north at 5 m/s on a straight track. The engine is causing it to accelerate northward at 2 m/s^2.
How far will it go before it is moving at 20 m/s?
A) 83
B) 43
C) 39
D) 94
E) 20
Answer:
(D) x = 93.8 m
Explanation:
v^2 = v0^2 + 2ax
(20 m/s)^2 = (5 m/s)^2 + 2(2 m/s^2)x
Solving for x,
x = 93.8 m
How does the presence of a nucleus provide a method of basic cell
classification? *
Answer:
The nucleus-containing cells are called eukaryotic cells. Eukaryote means having membrane-bound organelles.
Explanation:
I hope this is what you were looking for?!
Hope this helps!
Have a great day!
-Hailey!
The cells which have a nucleus are called Eukaryotic cells. The cells which do not have a nucleus are called prokaryotic cells.
What is a nucleus?
The nucleus is the controlling center of the body. It performs all the major activities in the cell. The cell which possesses a nucleus is called a eukaryote. The cell which does not have a nucleus is called prokaryote.
A prokaryotic cell is a straightforward, one-celled (unicellular) organism that is devoid of a nucleus or any other organelle that is membrane-bound. The nucleoid, a dark area in the center of the cell, is where prokaryotic DNA is located.
Therefore, The cells which have a nucleus are called Eukaryotic cells. The cells which do not have a nucleus are called prokaryotic cells.
To learn more about cell, refer to the link:
https://brainly.com/question/3142913
#SPJ2
The universe cooled after the Big Bang.At some point hydrogen atoms combined to form helium.What is this process called?
Answer:
Nuclear fusion
Explanation:
can someone please help me answer this!!
An Object, Start from rest w Confront Aiceleration 8m/s2 along a
Straight line. Find
A, the speed At the end Of 5 second
B, The average Speed for the 5second interval
Answer:
A) v = 40 m / s, B) v_average = 20 m / s
Explanation:
For this exercise we will use the kinematics relations
A) the final velocity for t = 5 s and since the body starts from rest its initial velocity is zero
v = vo + a t
v = 0 + 8 5
v = 40 m / s
B) the average velocity can be found with the relation
v_average = vf + vo / 2
v-average = 0+ 40/2
v_average = 20 m / s
Consider a coaxial cable (like the kind that is used to carry a signal to your TV). In this cable, a current I runs in one direction along the inner central wire, and the same current I runs in the opposite direction in the hollow conductor. How does the magnetic field B outside the entire cable (outside both the inner wire as well as the hollow conductor) vary as a function of distance away from the cable
Answer:
0 < r < r_exterior B_total = [tex]\frac{\mu_o I}{2\pi r}[/tex]
r > r_exterior B_total = 0
Explanation:
The magnetic field created by the wire can be found using Ampere's law
∫ B. ds = μ₀ I
bold indicates vectors and the current is inside the selected path
outside the inner cable
B₁ (2π r) = μ₀ I
B₁ = [tex]\frac{\mu_o I}{2\pi r}[/tex]
the direction of this field is found by placing the thumb in the direction of the current and the other fingers closed the direction of the magnetic field which is circular in this case.
For the outer shell
for the case r> r_exterior
B₂ = \frac{\mu_o I}{2\pi r}
This current is in the opposite direction to the current in wire 1, so the magnetic field has a rotation in the opposite direction
for the case r <r_exterior
in this case all the current is outside the point of interest, consequently not as there is no internal current, the field produced is zero
B₂ = 0
Now we can find the field created by each part
0 < r < r_exterior
B_total = B₁
B_total = [tex]\frac{\mu_o I}{2\pi r}[/tex]
r > r_exterior
B_total = B₁ -B₂
B_total = 0
1.What is the Kinetic energy of a 3 kg object moving at 4 m/s?
Plz help I’ll give points
Answer:
24 J
Explanation:
[tex]K = \frac{1}{2} mv^{2} = \frac{1}{2} (3kg)(4m/s)^{2} = 24 J[/tex]
The first extra-solar planet around a main sequence star (i.e., not a neutron star or white dwarf) was found around the star 51 Pegasi in 1995. The large planet causes a measureable motion of the star around the center of mass of the system. Pegasi 51's orbital motion had a period of 4 days indicating a very large planet very close to the star. A large planet of mass M around a small star of mass 4M. The distance between planet and star is L. Both the planet and star will orbit around the center of mass of the system (marked by the red X).
Required:
Where is the center of mass of the star-planet system?
Answer:
[tex]r_{cm}[/tex]= 1/5 L
Explanation:
To find the center of mass of the system let's use
[tex]r_{cm} = \frac{1}{M}[/tex] ∑ r_i x_i
where m is the total mass of the system
let's apply this expression to our case
Let's set the reference frame on the star
[tex]r_{cm} = \frac{1}{M +4M} ( 4M 0 + M L)[/tex]
r_{cm} = [tex]\frac{1}{5}[/tex] L
[tex]r_{cm}[/tex]= 1/5 L
Hey, the breast center is 1/5 of the distance between the star and the planet.
A person, with his ear to the ground, sees a huge stone strike the concrete pavement. A moment later two sounds are heard from the impact: one travels in the air and the other in the concrete, and they are 6.4 s apart. Part A How far away did the impact occur? (Use vair=343m/s , vconcrete=3000m/s )
Answer:
The impact occured at a distance of 2478.585 meters from the person.
Explanation:
(After some research on web, we conclude that problem is not incomplete) The element "Part A" may lead to the false idea that question is incomplete. Correct form is presented below:
A person, with his ear to the ground, sees a huge stone strike the concrete pavement. A moment later two sounds are heard from the impact: one travels in the air and the other in the concrete, and they are 6.4 seconds apart. How far away did the impact occur? (Sound speed in the air: 343 meters per second, sound speed in concrete: 3000 meters per second)
Sound is a manifestation of mechanical waves, which needs a medium to propagate themselves. Depending on the material, sound will take more or less time to travel a given distance. From statement, we know this time difference between air and concrete ([tex]\Delta t[/tex]), in seconds:
[tex]\Delta t = t_{A}-t_{C}[/tex] (1)
Where:
[tex]t_{C}[/tex] - Time spent by the sound in concrete, in seconds.
[tex]t_{A}[/tex] - Time spent by the sound in the air, in seconds.
By suposing that sound travels the same distance and at constant speed in both materials, we have the following expression:
[tex]\Delta t = \frac{x}{v_{A}}-\frac{x}{v_{C}}[/tex]
[tex]\Delta t = x\cdot \left(\frac{1}{v_{A}}-\frac{1}{v_{C}} \right)[/tex]
[tex]x = \frac{\Delta t}{\frac{1}{v_{A}}-\frac{1}{v_{C}} }[/tex] (2)
Where:
[tex]v_{C}[/tex] - Speed of the sound in concrete, in meters per second.
[tex]v_{A}[/tex] - Speed of the sound in the air, in meters per second.
[tex]x[/tex] - Distance traveled by the sound, in meters.
If we know that [tex]\Delta t = 6.4\,s[/tex], [tex]v_{C} = 3000\,\frac{m}{s}[/tex] and [tex]v_{A} = 343\,\frac{m}{s}[/tex], then the distance travelled by the sound is:
[tex]x = \frac{\Delta t}{\frac{1}{v_{A}}-\frac{1}{v_{C}} }[/tex]
[tex]x = 2478.585\,m[/tex]
The impact occured at a distance of 2478.585 meters from the person.
the minimum speed on the interstate highway is
1. 40 mph
2. 60 mph
3. 55 mph
4. 50 mph
I'm in Nebraska btw
Model the Earth's atmosphere as 79% N2, 19% O2, and 2% Argon, all of which are in thermal equilibrium at 280 K. At what height is the density of O half its value at sea level
Answer:
[tex]9.495 \times 10^3\ m[/tex]
Explanation:
From the given information:
Using the equation of Barometric formula as related to density, we have:
[tex]\rho (z) = \rho (0) e^{(-\dfrac{z}{H})} \ \ \ \ --- (1)[/tex]
Here;
[tex]p(z) =[/tex] the gas density at altitude z
[tex]\rho(0) =[/tex] the gas density at sea level
H = height of the scale
[tex]H = \dfrac{RT}{M_ag } \ \ \ --- (2)[/tex]
Also;
R represent the gas constant
temperature (T) a= 280 K
g = gravity
[tex]M_a =[/tex] molaar mass of gas; here, the gas is Oxygen:
∴
[tex]M_a =[/tex] 15.99 g/mol
= 15.99 × 10⁻³ kg/mol
[tex]H = \dfrac{8.3144 \times 280}{15.99 \times 10^{-3} \times 9.8 }[/tex]
[tex]H =14856.43 \ m[/tex]
Now we need to figure out how far above sea level the density of oxygen drops to half of what it is at sea level.
This implies that we have to calculate z;
i.e. [tex]\rho(z) =\dfrac{\rho(0) }{(2)}[/tex]
By using the value of H and [tex]\rho(z)[/tex] from (1), we have:
[tex]\dfrac{\rho(0) }{(2)} = \rho (0) e^{(-\dfrac{z}{14856.43})}[/tex]
∴
[tex]\dfrac{1}{2} = e^{(-\dfrac{z}{14856.43})} \\ \\ e^{(-\dfrac{z}{14856.43})} =\dfrac{1}{2}[/tex]
By rearrangement and taking the logarithm of the above equation; we have:
[tex]- z = 14856.43 \times \mathtt{In}\dfrac{1}{2} \\ \\ -z = 14856.43 \times (-0.6391) \\ \\ z = 9495 \ m \\ \\ z = 9.495 \times 10^3\ m[/tex]
As a result, the oxygen density at [tex]9.495 \times 10^3\ m[/tex] is half of what it is at sea level.
A bucket of water of mass 14.6 kg is suspended by a rope wrapped around a windlass, that is a solid cylinder with diameter 0.320 m with mass 11.1 kg . The cylinder pivots on a frictionless axle through its center. The bucket is released from rest at the top of a well and falls a distance 11.0 m to the water. You can ignore the weight of the rope.
Required:
a. What is the tension in the rope while the bucket is falling?
b. What is the time of fall?
c. While the bucket is falling, what is the force exerted on the cylinder by the axle?
Answer:
a. T = 39.41 N
b. t = 1.76s
c. 150.78 N
Explanation:
Given:
Mass of bucket of water, Mb = 14.6 kg
Mass of cylinder, Mc = 11.1 kg
Diameter of cylinder, D = 0.320 m, or radius, r = D/2 = 0.16m
Displacement of the bucket from the top, that is the vertical displacement , y = 11.0 m
a. The tension in the rope while the bucket is falling is:
F = mg - T = ma
Where F= The force
m= mass
g= Acceleration due to gravity
T = tension in the rope
a = acceleration
T= m(g - a)
Then, calculating the angular acceleration of the pulley system in relation to its radial acceleration
T= 1/2Ma
Merging the two final equation so as to solve for a
M(g - a) = 1/2Ma
Make a the subject of the formula
Mg - Ma = 1/2Ma
1/2Ma + Ma = Mg
a (1/2 M + M) = Mg
Divide both side by (1/2 M + M)
a = Mg ÷ (1/2 M + M)
Inputing the given value in the formula above
g= 9.8m/s2
a = (14.6 kg) (9.8m/s2) ÷ 1/2 (11.1 kg) + 14.6 kg
a = 7.1007m/s2
Now it is easy to input the value into T= 1/2Ma
T = 1/2 (11.1 kg) (7.1007m/s2) = 39.41 N
B. Time of fall is:
Using one of the equation of motion
s = ut + 1/2 at^2
U = Initial velocity
t = time
a = acceleration
s= distance in this case displacement y
making t the subject of the formula
t = √(2s ÷ a)
u is 0 since the bucket starts from rest
so, t = √((2)(11.0 m) ÷ 7.1007m/s2)
t = 1.76s
c. the force exerted on the cylinder by the axle = T + Mg
= 42 N + (11.1 kg) (9.8m/s2)
= 150.78 N
You are riding on a carousel that is rotating at a constant 24 rpm. It has an inside radius of 4 ftand outside radius of 12 ft. You begin to run from the inside to the outside along a radius. Your peak velocity with respect to the carousel is 6 mph and occurs at a radius of 8 ft.What are your maximum Coriolis acceleration magnitude and its directionwith respect to the carousel
Answer:
magnitude of the Coriolis acceleration is 44.235 ft/s² and the direction of the acceleration is along the axis of transmission
Explanation:
Given the data in the question;
Speed of carousel N = 24 rpm
From the diagram below, selected path direction defines the Axis of slip.
Hence, The Coriolis is acting along the axis of transmission
Now, we determine the angular speed ω of the carousel.
ω = 2πN / 60
we substitute in the value of N
ω = (2π × 24) / 60
ω = 2.5133 rad/s
Next, we convert the given velocity from mph to ft/s
we know that; 1 mph = 1.4667 ft/s
so
[tex]V_{slip[/tex] = 6 mph = ( 6 × 1.4667 ) = 8.8002 ft/s
Now, we determine the magnitude of the Coriolis acceleration
[tex]a_c[/tex] = 2( [tex]V_{slip[/tex] × ω )
we substitute
[tex]a_c[/tex] = 2( 8.8002 ft/s × 2.5133 rad/s )
[tex]a_c[/tex] = 44.235 ft/s²
Hence, magnitude of the Coriolis acceleration is 44.235 ft/s² and the direction of the acceleration is along the axis of transmission
2. A 4kg object possesses 18J of Kinetic energy. What is the velocity?
Plz help I’ll give you points!
the pygmy shrew has an average mass of 2.0 g if 49 of these shrew are placed on a spring scale with a spring constant of 24 N/m , what is the springs displacement
Answer:
Spring's displacement, x = -0.04 meters.
Explanation:
Let the spring's displacement be x.
Given the following data;
Mass of each shrew, m = 2.0 g to kilograms = 2/1000 = 0.002 kg
Number of shrews, n = 49
Spring constant, k = 24 N/m
We know that acceleration due to gravity, g is equal to 9.8 m/s².
To find the spring's displacement;
At equilibrium position:
Fnet = Felastic + Fg = 0
But, Felastic = -kx
Total mass, Mt = nm
Fg = -Mt = -nmg
-kx -nmg = 0
Rearranging, we have;
kx = -nmg
Making x the subject of formula, we have;
[tex] x = \frac {-nmg}{k} [/tex]
Substituting into the formula, we have;
[tex] x = \frac {-49*0.002*9.8}{24} [/tex]
[tex] x = \frac {-0.9604}{24} [/tex]
x = -0.04 m
Therefore, the spring's displacement is -0.04 meters.
7)
Which wave carries the most energy?
-)
A)
B)
C)
D)
Hover over answer image to enlarge
C.
Explanation:
C. is a gamma ray and they carry the most energy.
The most energy is carried by the gamma rays. The correct option is C.
What is a gamma ray?Gamma radiation, also known as gamma rays, is a type of electromagnetic radiation produced by the radioactive decay of atomic nuclei. It is made up of electromagnetic waves with the shortest wavelengths, which are typically shorter than those of X-rays.
Waves with a higher frequency have more energy. Gamma rays have the shortest wavelengths and highest frequencies of any electromagnetic wave. Gamma rays have more energy than any other electromagnetic wave due to their extremely high frequencies.
To know more about gamma rays follow
https://brainly.com/question/22166705
#SPJ6
HURRY IM TIMED!
The age and gender of an audience are important to consider when deciding on a subject.
True
False
Answer:
True.
Explanation:
true
knowing your audience there General age gender education level religion language culture and gave group members is the single most important aspect of developing your speech this means the speaker dock smart the audience wasn't often without asking question or spending with any feedback