Answer:
The rotation frequency required is 23.78 RPM
Explanation:
Given;
radial acceleration, a = 32.7 m/s²
length of the beam, r = 5.29 m
The linear velocity is calculated as;
[tex]a = \frac{v^2}{r} \\\\v^2 = ar\\\\v = \sqrt{ar}[/tex]
where;
v is linear velocity
The angular velocity is calculated as;
[tex]\omega = \frac{v}{r} \\\\Recall, v = \sqrt{ar} \\\\Then, \omega = \frac{\sqrt{ar}}{r}} \\\\ \omega = \frac{\sqrt{32.7 \times5.29}}{5.29}\\\\\omega = 2.49 \ rad/s\\\\Angular \ frequency \ is \ calculated \ as;\\\\\omega = 2\pi f\\\\f = \frac{\omega}{2\pi} \\\\f = \frac{2.49}{2\pi} \\\\f = 0.396 \ rev/s\\\\f = 23.78 \ rev/min[/tex]
Therefore, the rotation frequency required is 23.78 RPM
Which image shows the difference between the speed of molecules in hot and cold water? Explain your answer choice.
HELP ME,EVERYONE!!!!!!!! :(
Answer:
the answer is B
Explanation:
I think its B because on the top it shows the molecule speed and A looks like the water is cold, C shows that the hot
water is cooler, and D shows that both are cold
What is nature/nurture debate and why is it important in psychology
A ball bearing is projected vertically upwards from the ground with a velocity of 15ms. Calculate the time taken by the ball to return to the ground (g=10ms^2)
Answer:
t = 3 [s]
Explanation:
To solve this problem we must use the following equation of kinematics.
[tex]v_{f}=v_{o}-g*t[/tex]
where:
Vf = final velocity [m/s]
Vo = initial velocity = 15 [m/s]
g = gravity acceleration = 10 [m/s²]
t = time [s]
Now replacing we have:
[tex]0 = 15 -10*t\\10*t=15\\t= 1.5[s][/tex]
Note: In the equation above the gravity acceleration is negative, because the movement of the ball bearing is pointing againts the gravity acceleration.
The time calculated is only when the ball bearing reaches the highest elevation, and it will take the same time for descending, therefore the total time is:
t = 1.5 + 1.5 = 3 [s]
A car is traveling at a constant speed of 20 m/s for 3 seconds. Then the driver puts on the brakes. The total distance the car travels is 100 m. What is the total time the car was moving?
Answer:
15 seconds
Explanation:
If car was moving at 20m/s for 3 sec.
if car traveled 100m = 15 sec total
Read the scenario and solve these two problems.
When traveling at top speed, a roller coaster train with a mass of 12,000 kg has a velocity of 30 m/s. The kinetic energy of the train at top speed is
J.
Given this kinetic energy, what is the tallest hill this roller coaster train can reach the top of?
The train can climb a hill that is
m high.
Answer:
45.9m
Explanation:
Given parameters:
Mass of roller coaster train = 12000kg
Velocity = 30m/s
Unknown:
Tallest hill the roller coaster train can reach = ?
Solution:
Kinetic energy is the energy due to the motion of body.
Potential energy is the energy due to the position of a body.
So;
[tex]\frac{1}{2}[/tex] m v² = mgh
m is the mass, g is the acceleration due to gravity, h is the height and v is the velocity
m v² = 2mgh
v² = 2gh
h = [tex]\frac{v^{2} }{2g}[/tex]
h = [tex]\frac{30^{2} }{2 x 9.8}[/tex] = 45.9m
Which is the best explanation for why Toms technique works ?
True or False. Facts are based on observations. *
True
False
Answer:
TRUE
Explanation:
IM SMART
Answer:
Stay Safe! ,God bless you . The answer is false ,
Explanation:
An 88 kg person steps into a car of mass 2002 kg, causing it to sink 5.36 cm on itssprings. Assuming no damping, with what fre-quency will the car and passenger vibrate onthe springs? Answer in units of Hz. The acceleration of gravity is 9.81 m/s^2.
Answer:
The required frequency = 0.442 Hz
Explanation:
Frequency [tex]f = ( \dfrac{1}{2 \pi}) \omega[/tex]
where;
[tex]\omega = \sqrt{\dfrac{k}{m} }[/tex]
Then;
[tex]f = \Bigg ( \dfrac{1}{2 \pi} \Bigg ) \Bigg( \sqrt{\dfrac{k}{m} } \Bigg )[/tex]
However;
[tex]k = \dfrac{F}{x}[/tex] and;
mass [tex]m = m_{car } + m_{person}[/tex]
[tex]f = \Bigg ( \dfrac{1}{2 \pi} \Bigg ) \Bigg( \sqrt{\dfrac{\dfrac{F}{x}}{m_{car}+m_{person}} } \Bigg )[/tex]
[tex]f = \Bigg ( \dfrac{1}{2 \pi} \Bigg ) \Bigg( \sqrt{\dfrac{{F}}{x(m_{car}+m_{person})} } \Bigg )[/tex]
where;
[tex]F = m_{person}g[/tex]
Then;
[tex]f = \Bigg ( \dfrac{1}{2 \pi} \Bigg ) \Bigg( \sqrt{\dfrac{ {m_{person}g }}{x(m_{car}+m_{person})} } \Bigg )[/tex]
replacing the values;
[tex]f = \Bigg ( \dfrac{1}{2 \pi} \Bigg ) \Bigg( \sqrt{\dfrac{ {(88 \ kg)* (9.81 \ m/s^2) }}{(5.36 \times 10^{-2} \ m) (2002 \ kg +88 \ kg)} } \Bigg )[/tex]
[tex]\mathbf{f = 0.442 \ Hz}[/tex]
3. A car is traveling up a 3% grade, with the speed of 85mph, on a road that has good, wet pavement. A deer jumps out onto the road and the driver applies the brakes 290-ft from it. The driver hits the deer at a speed of 20mph.If the driver did not have antilock brakes, and the wheels were locked the entire distance, would a deer-impact speed of 20mph be possible
Answer:
Explanation:
From the given information;
Let assume that:
the wheel radius = 15 inches
the driveline slippage = 3%; &
the gear reduction ratio (overall) = 2.5 to 1
So; using the equation:
[tex]v_1= \dfrac{2 \pi r n_o (1 -i)}{\varepsilon_o}[/tex]
[tex]v_1= \dfrac{2 \times 3.14 \times \dfrac{15}{12} \times \dfrac{85}{100} (1 -0.03)}{2.5}[/tex]
[tex]v_1= \dfrac{2 \times 3.14 \times \dfrac{15}{12} \times \dfrac{85}{100} (0.97)}{2.5}[/tex]
[tex]v_1 = 126.92 \ fp^3[/tex]
[tex]frl = 0.01 ( 1+ \dfrac{v}{147}) \ if \ v \ is \ ft/sec[/tex]
[tex]frl = 0.01 \Bigg( 1+ \dfrac{\dfrac{126.92 +(20)1.47 }{2} }{147}\Bigg)[/tex]
[tex]S = \dfrac{v_b ( v_1^r-v_2^r)}{2g(n_b \mu + frl \pm sin \ y}[/tex]
where;
[tex]\mu = 0.6[/tex]
[tex]291 = \dfrac{1.64( 126.92^2-29.9^2)}{64.4(n_b \times 0.6 +0.01532 +0.03}[/tex]
[tex]n_b = 1.33 \to which \ is \ not \ possible[/tex]
However;
[tex]n_b \mu = 1.33(0.6) = 0.80[/tex]
[tex]\mu = 0.9 \to[/tex] if the car's anti-clock breaking system did not fail
Thus;
[tex]n_b (0.9) = 0.80[/tex]
[tex]n_b =\dfrac{ 0.80}{(0.9) }[/tex]
[tex]n_b = 0.89[/tex]
Hence, the distance is possible if the anti-clock breaking system did not fail.
If the force of gravity suddenly stopped acting on planets, they would
A.) spiral slowly towards the sun
B.) continue to orbit the sun
C.) move in straight lines tangent to thier orbits
D.) spiral slowly away from the sun
E.) fly straight away from the sun
An object is released from rest at a height H near and above the surface of Earth. As the object falls toward the surface, Earth’s atmosphere exerts a resistive force on the object such that it reaches a terminal velocity before it reaches the ground. Which of the following claims is true? Select two answers.
The system consisting of only the object is an open system.
The system consisting of only the object is an open system.
A
Earth’s atmosphere does negative work on the object as it falls toward the surface.
Earth’s atmosphere does negative work on the object as it falls toward the surface.
B
The change in the object’s kinetic energy from the instant it is released from rest, to the instant it reaches terminal velocity, is zero.
The change in the object’s kinetic energy from the instant it is released from rest, to the instant it reaches terminal velocity, is zero.
C
The total mechanical energy of the object-Earth system remains constant at all times in which the object is in motion.
Answer:
Second and Last Option Are Correct
Explanation:
A weightlifter curls a 32 kg bar, raising it each time a distance of 0.50 m. How many times must he repeat this exercise to burn off the energy in one slice of pizza? Assume 25% efficiency.
Answer:
Explanation:
Average energy contained by a slice of pizza is 860 J .
energy used in lifting 32 kg bar by .50 m = mgh
= 32 x 9.8 x .5 = 156.8 J
efficiency is 25 % , so energy used up = .75 x 156.8 = 117.6 J
So number of times exercise to be repeated to burn off energy of a slice of pizza
= 860 / 117.6
= 7.3 or 7 times .
John and Tom were given one mirror each by their teacher. Tom found his image to be erect and of the same size whereas John found her image erect and smaller in size. This means that the mirrors of John and tom are, respectively
(a) plane mirror and concave mirror.
(b) concave mirror and convex mirror.
(c) plane mirror and convex mirror.
(d) convex mirror and plane mirror
Answer:
(d)
Explanation:
John- convex mirror
Tom - plane mirror
Answer:
(d) convex mirror and plane mirror
Explanation:
A plane mirror forms an image that is : virtual { behind the mirror } , image and object are at the same distance from the flat mirror, image is upright and image size is the same as object size. Tom's image.
A concave mirror form both real and virtual images. When a concave mirror is very near to an object , the image is virtual and magnified. When the distance between object and mirror is increased, a real image is formed and the size is reduced.
In a convex mirror, the image formed is smaller than the object, it is upright and is located behind the mirror. The image is virtual. John's image.
How do sound waves travel?
Chemical messengers that stimulate a specific cellular response.
Glucose
Hormones
Mitochondria
Nerves
Answer:
Explanation:
hormones. please mark me brainliest
This illustration shows two opposing forces pulling on a wagon. Which description best describes how the wagon will move?
10N
30N
The wagon will slow down
The wagon will move to the left.
The wagon will not move because the forces are opposite
The wagon will move to the right.
4 5 6 7 8
9 10 11 12 13
Next
Type here to search
Answer:
The wagon will move to the right.
Explanation:
From the question given above, the following data were obtained:
Force applied to the left (Fₗ) = 10 N
Force applied to the right (Fᵣ) = 30 N
Direction of the wagon =.?
To determine the direction in which the wagon will move, we shall determine the net force acting on the wagon. This can be obtained as follow:
Force applied to the left (Fₗ) = 10 N
Force applied to the right (Fᵣ) = 30 N
Net force (Fₙ) =?
Fₙ = Fᵣ – Fₗ
Fₙ = 30 – 10
Fₙ = 20 N to the right
From the calculations made above, the net force acting on the wagon is 20 N to the right. Hence the wagon will move to the right.
Learning task 2: Using the information you gathered from Learning Task 1, make a concept web of the contributions of the following scientist in the DEVELOPMENT OF MAGNETIC THEORY
A. Andre- Marie Ampere
B. Michael Faraday
C. Heinrich Herts
D. James Clerk Maxwell
E. Hans Christian Oersted
Answer:
The contributions of the following scientist in the DEVELOPMENT OF MAGNETIC THEORY
James Clerk Maxwell Hans Christian OerstedExplanation:
George Green was the first personality to formulate a mathematical principle of magnetism and electricity and his system created the framework for the work of different scientists such as William Thomson, James Clerk Maxwell, and others. Magnetism is the power exercised by magnets when they drag or deflect each other. Magnetism is produced by the movement of electric charges.
The contributions of James Clerk Maxwell and Hans Christian Oersted, et al in the DEVELOPMENT OF MAGNETIC THEORY are as follows:
They discovered that the speed at which electromagnetic waves traveled was similar to that of lightThey proved that there was a proportional connection between electricity and magnetismAccording to the given question, we are asked to show the contributions which the aforementioned scientists had in the development of the magnetic theory.
As a result of this, we can see that James Maxwell first developed this theory in the nineteenth century and the theory was modified by other scientists who made the framework for the electrical system and magnetism.
Read more here:
https://brainly.com/question/17913237
A hot-air balloon has a volume of 2500 m3 . The balloon fabric (the envelope) weighs 860 N . The basket with gear and full propane tanks weighs 1200 N .
a) If the balloon can barely lift an additional 3400 N of passengers, breakfast, and champagne when the outside air density is 1.23kg/m3, what is the average density of the heated gases in the envelope?
Answer:
1.007 kg/m³
Explanation:
Given that:
volume = 2500 m³
density of air [tex]\rho = 1.23 \ kg/m^3[/tex]
weight of air displaced = [tex]V \times \rho \times g[/tex]
= 2500 × 1.23 × 9.81
= 30165.75 N
weight of the ballon fabric = 860 N; &
The propane weight = 1200 N
The passenger additional weight = 3400 N
weight of the heated gas will be = V × d × g
= 2500 × d 9.81
= 24525 d
For floating
The weight of air displaced is less than 30165.75
∴ 860 + 1200 + 3400 + 24525 d = 30165.75
5460 + 24525 d = 30165.75
24525 d = 24705.75
d = 24705.75 / 24525
d = 1.007 kg/m³
Hence, the average density of the heated gas = 1.007 kg/m³
a student lift a 25kg mass at vertical distance of 1.6m in a time of 2.0 seconds. a. Find the force needed to lift the mass (in N ). b. Find the work done by the student (in J). c. Find the power exerted by the student (in W)
Answer:
a. F = 245 Newton.
b. Workdone = 392 Joules.
c. Power = 196 Watts
Explanation:
Given the following data;
Mass = 25kg
Distance = 1.6m
Time = 2secs
a. To find the force needed to lift the mass (in N );
Force = mass * acceleration
We know that acceleration due to gravity is equal to 9.8
F = 25*9.8
F = 245N
b. To find the work done by the student (in J);
Workdone = force * distance
Workdone = 245 * 1.6
Workdone = 392 Joules.
c. To find the power exerted by the student (in W);
Power = workdone/time
Power = 392/2
Power = 196 Watts.
A pingpong ball has 2 kg/s of momentum when
thrown 8 m/s. Find the mass of the ball.
Answer:
0.25 kg
Explanation:
p = mv
2 = m(8)
2/8 = m(8)/8 *cancels
m = 1/4 OR 0.25 kg
Calculate the extension of a 20cm spring that has a spring contrast of 45000N/m and 1500N of elastic potential energy.
Answer:
See the answer below
Explanation:
The elastic potential energy can be calculated by means of the following equation:
[tex]E_{el}=\frac{1}{2} *k*x^{2}[/tex]
where:
Eel = elastic energy = 1500 [J]
k = spring constant = 45000 [N/m]
x = extension [m]
[tex]1500=\frac{1}{2} *45000*x^{2} \\3000=45000*x^{2} \\x=\sqrt{0.06666}\\x=0.258[m] = 25.8 [cm][/tex]
In the figure, given ∆x=30cm, k=200N/cm, g=10m/s². Find the mass of the object
Answer:
600 Kg
Explanation:
From the question given above, the following data were obtained:
Extention (∆x) = 30 cm
Spring constant (K) = 200 N/cm Acceleration due to gravity (g) = 10 m/s²
Mass (m) of object =?
Next, we shall determine force exerted. This can be obtained as follow:
Extention (∆x) = 30 cm
Spring constant (K) = 200 N/cm
Force (F) =?
F = K∆x
F = 200 × 30
F = 6000 N
Finally, we shall determine the mass of the object. This can be obtained as follow:
Acceleration due to gravity (g) = 10 m/s²
Force (F) = 6000 N
Mass (m) of object =?
F = mg
6000 = m × 10
Divide both side by 10
m = 6000 / 10
m = 600 Kg
Thus, the mass of the object is 600 Kg
Water will expand more than ___
A. door
B. juice
C. air
Answer:
Its A. door because liquids expand better than solids
at what speed does the kg ball move ?
Answer: Choice A) 2 meters per second
=======================================================
Explanation:
The smaller ball has momentum of
p = m*v
p = (1 kg)*(4 m/s)
p = 4 kg*m/s
All of this momentum transfers into the larger ball because the smaller ball comes to a complete stop.
For the larger ball, we have p = 4 and m = 2. Let's find v.
p = m*v
4 = 2*v
4/2 = v
2 = v
v = 2 m/s which is why the answer is choice A
The larger ball moves at a speed of 2 meters per second. The speed is cut in half compared to the smaller ball because the larger ball has more inertia (aka more mass), and therefore it takes more energy to move it. If you apply the same energy to each, then the smaller object moves faster.
A 2.6 kg ball is accelerated at 4.5 m/s2.
Calculate the force needed to achieve this feat.
Show all work including formula and units!
Answer:
[tex]12\:\mathrm{N}[/tex]
Explanation:
Force is given by the equation [tex]F=ma[/tex].
Plugging in given values, we have:
[tex]F=ma=2.6\cdot 4.5=11.7=\fbox{$12\:\mathrm{N}$}[/tex] (two significant figures).
PLZ HELP WILL MARK BRAINLIEST!!
Amy has a mass of 50 kg, and she is riding a skateboard traveling 10 meters per second. What is her momentum?
5 kg·m/s
10 kg·m/s
50 kg·m/s
500 kg·m/s
Answer:
[tex]500 \: \mathrm{kg} \cdot \mathrm{m/s}[/tex]
Explanation:
The momentum of an object is given as [tex]p=mv[/tex]. Since Amy has a mass of 50 kg and is travelling 10 m/s, her momentum is [tex]p=mv=50\cdot 10 =\fbox{$500\: \mathrm{kg\cdot m/s}$}[/tex].
Answer:
500
Explanation:
If California experienced heavy rainfall, which system would be responsible for it and WHY?
Answer:
California has one of the most variable climates of any U.S state, and often experiences very wet years followed by extremely dry ones . The state's reservoirs have insufficient capacity to balance the water supply between wet and dry years.
PLEASE MARK ME AS BRAINLIEST
PLEASEEEEEEEEE HELPPPPPPPPPP
Describe what determines magnetism.
Answer:
Magnetism is caused by the motion of electric charges. Every substance is made up of tiny units called atoms. Each atom has electrons, particles that carry electric charges. ... Their movement generates an electric current and causes each electron to act like a microscopic magnet.
Explanation:
The graph shows projected changes in the populations of the world.
World Population Growth
20,000
10,000
World
5,000
Asia
2,000
Africa
1,000
Europe
500
200
United States,
Canada, and Greenland
100 Mexico
Central America, Caribbean Islands,
50
and South America
Oceania (Australia and
20
nearby islands in the Pacific)
10
2040
2050
Based on the information in the graph, which region is expected to have the
greatest increase in its population over the period shown?
1950
1960
1970
1980
1990
2000
2010
2020
2030
Answer: C. Africa
Explanation:
The data given on the graph shows that:
Asia will grow from around 1,300 million to 5,000 million in 2050 which is an increase of:
= 5,000 /1,300 = 3.84 times
Europe will decrease over that period.
Africa will go from around 300 million to 2,000 million which is an increase of:
= 2,000 / 300
= 6.67 times
Mexico
, Central America, Caribbean Islands:
= 900 / 120
= 7.5 times
United States, Canada, and Greenland:
= 400/120
= 3.33
Oceania:
= 50 / 13
= 3.85
From the options give, Africa will see the greatest increase at 6.67 times its population in 1950.
A 12-kg object is moving rightward with a constant velocity of 4 m/s. How much net force is required to keep the object moving with
the same speed and in the same direction?