A fish swimming at a rate of .6 m/s notices a huge shark. Three seconds later, the fish is swimming at a speed of 3 m/s. What is the fish's acceleration?

0.8 m/s/s
-0.8 m/s/s
12.5 m/s/s
-12.5 m/s/s

Answer:

I took the science quiz and Its A

Explanation:

HOPE THIS HELPS!

The iron-nickel alloy melts due to hot temperatures. This statement best explains why Earth’s outer core is in liquid form

The Earth's outer core is the second innermost layer, located between the inner core and the mantle. It contains mostly iron and nickel, which- due to lower pressure than existing at the inner core- are in the liquid form. The outer core, about 2,200 kilometers (1,367 miles) thick, is mostly composed of liquid iron and nickel  because of the high temperature. However, the intense pressure, which increases towards the inner core, dramatically changes the melting point of the nickel–iron, making it solid. The  iron and nickel alloy of the outer core is very hot, between 4,500° and 5,500° Celsius (8,132° and 9,932° Fahrenheit).

The outer core is a liquid alloy of mainly iron and nickel. The reason why the core is metal is that the heavy metals sank to the center while the Earth was cooling. The mantle which lies above the core is made of molten rock

correct option is a) The iron-nickel alloy melts due to hot temperatures.

To learn more about outer core here

https://brainly.com/question/2162876?referrer=searchResults

#SPJ2

∞infinaty stones∞

because why not

Answer:

the Princess in "St. George and the Dragon"

Answer:

The princess in st. George and the dragon

Explanation:

Have a good day

Answer:

Okay I might be wrong and sorry if i am either its 12 or 0.402

Explanation:

* I recommend the second one cause its more logical

Be aware I might be wrong

Answer:

The velocity of Mosquito with respect to earth will be 0.302m/s

Explanation:

V(ma) = 1.10 m/s, east  Velocity of mosquito with respect to air

V(ae) = 1.4 m/s at 35°  Velocity of air with respect to Earth in west of south direction.

Velocity of Mosquito with respect to earth will be  

V(me) = V(ma) + V(ae)

We need to find the mosquito’s speed with respect to Earth in the x direction.

V(x, me) = V(x, ma) + V(x, ae) = V(ma) + V(ae)(cos theta(ae) )

Angle (ae) = –90.0° − 35°=−125°

V(x, me) = 1.10 + (1.4)Cos(-125)

             = 1.10 + 1.4(-0.57)

             = 1.10 -0.798

              = 0.302

So the velocity of Mosquito with respect to earth will be 0.302m/s

Answer:

Explanation:

The mass of the man can be found by using the formula

[tex]m = \frac{p}{v} \\ [/tex]

v is the velocity

p is the momentum

From the question we have

[tex]m = \frac{225.3}{2.65} \\ = 85.01886...[/tex]

We have the final answer as

Hope this helps you

Answer:

1.97 * 10^8 m/s

Explanation:

Given that:

n = 1.52

Recall : speed of light (c) = 3 * 10^8 m/s

Speed (v) of light in glass:

v = speed of light / n

v = (3 * 10^8) / 1.52

v = 1.9736 * 10^8

Hence, speed of light in glass :

v = 1.97 * 10^8 m/s

Answer:

4..... the answer is 4

Explanation:

Answer:

A = 4.6 [m²]

Explanation:

The area of a circle can be calculated by means of the following equation.

[tex]A=\frac{\pi }{4} *D^{2}[/tex]

where:

A = area [m²]

D = diameter = 2.42 [m]

Now replacing:

[tex]A=\frac{\pi }{4} *(2.42)^{2} \\A = 4.6 [m^{2} ][/tex]

Answer:

1) Please find attached, created with Microsoft Visio

2) The acceleration of the masses connected by the light string is 0.00735 m/s²

3) The tension in the cord is 0.147 N

4) The time it would take the block to go 1.2 m to the edge of the table is approximately 18.07 s

5) The velocity of the cart as soon as it gets to the edge of the table is 0.042 m/s

Explanation:

1) Please find attached, the required free body diagram, showing the tension, weight and frictional (zero friction) forces acting on the cart and the mass created with Microsoft Visio

2) The acceleration of the masses connected by the light string is given as follows;

F = Mass, m × Acceleration, a

The mass of the truck, M = 20.0 kg

The mass attached to the string, hanging rom the pulley, m = 0.0150 kg

The force, F acting on the system = The pulling force on the cart = The tension on the cable = The weight of the hanging mass = 0.0150 × 9.8 = 0.147 N

The pulling force acting on the cart, F = M × a

∴ F = 0.147 N = 20.0 kg × a

a = 0.147 N/(20.0 kg) = 0.00735 m/s²

The acceleration of the truck = a = 0.00735 m/s²

3) The tension in the cord = F = 0.147 N

4) The time, t, it would take the block to go 1.2 m to the edge of the table is given by the kinematic equation, s = u·t + 1/2·a·t²

Where;

s = The distance to the edge of the table = 1.2 m

u = The initial velocity = 0 m/s (The cart is assumed to be initially at rest)

a = The acceleration of the cart = 0.00735 m/s²

t = The time taken

Substituting the known values, gives;

s = u·t + 1/2·a·t²

1.2 = 0 × t + 1/2 ×0.00735 × t²

1.2 = 1/2 ×0.00735 × t²

t² = 1.2/(1/2 ×0.00735) ≈ 326.5306

t = √(1.2/(1/2 ×0.00735)) ≈ 18.07

The time it would take the block to go 1.2 m to the edge of the table = t ≈ 18.07 s

5) The velocity, v, of the cart as soon as it gets to the edge of the table is given by the kinematic equation, v² = u² + 2·a·s as follows;

v² = u² + 2·a·s

u = 0 m/s

v² = 0² + 2 × 0.00735 × 1.2 = 0.001764

v = √(0.001764) = 0.042

The velocity of the cart as soon as it gets to the edge of the table = v = 0.042 m/s.

Answer:

There's no answer I'm just taking points like you did me,  so thank you for your points I'll put them to good use ;)

Answer:

Newton's laws of motion are three physical laws that, together, laid the foundation for classical mechanics. They describe the relationship between a body and the forces acting upon it, and its motion in response to those forces.

Explanation:

What are Newton's 1st 2nd and 3rd laws of motion?

In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.

Answer:

D

Explanation:

Answer:

The solid sphere.

Explanation:

The moment of inertia for hollow sphere is larger, thereby having a greater resistance to motion. Thus the solid sphere will have greater speed.

Answer:

The solid sphere

Explanation:

So when comparing the spheres, both spheres have the same density and have the same radius which would they are the same size so the only factor to vary them is mass. The solid sphere is filled and thus heavier compared to the hollow sphere which has lighter air. As a result, the solid sphere will be pulled down by gravity more and reach the bottom first.

Answer: Two objects sliding against each other.

Explanation:

The friction between the two surfaces converts kinetic energy into heat.

Answer:

sunlight

Explanation:

Photosynthesis is made possible by energy from the sun.

Answer:

9.8×104Nm−2,0.025,3.92×106Nm−2

Solution :

Here, L=10cm=10×10−2m

F=100kgf=100×9.8N

ΔL=0.25cm=0.25×10−2m,

Shearing stress =FL2=100×9.8(10×10−2) Sheraing strain =ΔLL=0.25×10−210×10−2 = 0.025 Shear Modulus of elasticity, G=Shearing stressShearing strain=9.8×1040.025

=3.92×106Nm−2

Explanation:

Answer:

cold

Explanation:

Answer:

The value is  [tex]F = 235.2 \ N[/tex]

Explanation:

From the question we are told that

   The mass of the sled is  [tex]m = 80 \ kg[/tex]

  The  coefficient of friction is  [tex]\mu = 0.30[/tex]

Generally the force that must be applied to the sled is equal to the frictional force experienced by the sled which is mathematically represented as

       [tex]F = m * \mu * g[/tex]

=>    [tex]F = 80 * 0.30 * 9.8[/tex]

=>    [tex]F = 235.2 \ N[/tex]

Answer:

Explanation below

Explanation:

Ice, mostly in the form of glaciers can create different landforms as it erodes the earth. In some areas with mountains, the glaciers move gradually downhill and across the land areas. When they move, the transport virtually everything on their path, ranging from small grains of sands to huge boulders.  

As these glaciers flow, the rocks being carried in the process scrape against the ground and erode both the ground and the rocks. Rocks are being ground up and oils are scrapped away.  

The main types of erosion created by the glaciers are abrasion and plucking.  

Answer:

yes i think that inner planets should be explored because if we ever find new life or are able to live there then i think its worth takeing a risk.

Explanation:

Answer:

HUYGENS, CAN I S HAVE BRAINLIST?

Answer:

None

Explanation:

It is erasmus bartholinus

Answer:

Pollution

Climate change

Explanation:

The destruction of the coral reef can be attributed to pollution and climate change.

The pollution of the atmosphere by greenhouse gases such as carbon dioxide causes the average temperature of the planet to increase, a phenomenon that is referred to as global warming. Global warming also causes an increase in the temperature of sea waters which can lead to the death of microscopic algae, causing coral bleaching.

An increase in the concentration of carbon dioxide in the atmosphere also causes ocean acidification which, in turn, reduces the availability of materials required to form the calcium carbonate of the coral reef. In extreme cases, acidification of the ocean can cause the dissolution of the coral skeletons.

Answer:

-3.33 ms^-2

Explanation:

Hope it helps

Answer:

C. Garnet

Explanation:

density = mass/volume

density = 6.24g/1.98cm^3

density = 3.15 g/cm^3 (Garnet)

Hope this helps!

Garnets are minerals that can be found as single crystals, pebble-like formations, or masses of intergrown crystals.They are opaque, transparent to translucent minerals. Thus, option C is correct.

A garnet has a volume of 1.6 cubic centimetres and a density of 3.5 grams per cubic centimetre. The proportion of a mineral's mass to volume is known as density. It is a measurement of how much “stuff” can fit into the space a mineral takes up.

Garnets can be found in a variety of colours, including orange, yellow, green, purple, brown, blue, black, pink, and colorless, but are most usually found in reddish tones.There are very few blue garnets.

Therefore, density = mass/volume density = 6.24g/1.98 cm^3 density = 3.15 g/cm^3 (Garnet).

Learn more about Garnet here:

https://brainly.com/question/28883904

#SPJ2

Answer:

Explanation:

Option C is the correct answer

Infrared radiation from the Sun is trapped by greenhouse gases and heats the atmosphere, by this phenomenon of heat absorption the greenhouse gases warm the atmosphere,therefore the correct answer is option C.

The propagation of electromagnetic waves, which are generated from both natural and artificial sources, results in the energy radiation known as electromagnetic radiation.

This radiation does not need any kind of medium to propagate. The electromagnetic wave has components of light as well as heat in them.

By absorbing heat through the process of heat assimilation, greenhouse gases warm the atmosphere by trapping infrared light from the Sun.

Thus, the correct answer is option C.

Learn more about electromagnetic radiation from here,

brainly.com/question/10759891

#SPJ2

Answer:

Explanation:

Circuit breaker is an automatic electrical  switch which cuts the power when there is surge in current.

Advantages of Circuit breaker

Disadvantage of Circuit breaker

Answer:

The benefits are defined throughout the section described according to the particular context.

Explanation:

Answer:

Answer: B. $0.78.

Explanation:

Cost of Electricity

The rate of the cost of electricity is usually expressed in $/kWh or cents/kWh because the consumption of electricity is measured in Kilowatts-hour.

The local power company charges 5.79 cents/kWh.

We are required to calculate the cost to run a 120 W stereo system for 4 hours per day for 4 weeks.

The total consumption time is 4 hours/day * 7 days/week *4 weeks = 112 hours

The total energy consumed is 120 W * 112 h =13,440 Wh.

Converting to kWh: 13,440 Wh/1,000 = 13.440 kWh.

Finally, we multiply by the cost rate: 5.79 cents/kWh * 13.440 kWh = 77.8 cents/100 = $0.78.

Answer: B. $0.78.