Answer:
I don't know the answer I hope you find it tho good luck##
What kind of waves are light waves and radio waves
Answer:
Electromagnetic waves
Explanation:
Calculate the speed with which you would have to throw a rock to put it into orbit around the asteroid 234 Ida near its surface, assuming 234 Ida is spherical. Ida’s mass is 4 × 1016 kg and its radius is 16 km.
Answer:
The speed with which a rock would have to be thrown to put it in 234 Ida's orbit, near its surface is approximately 12.917 m/s
Explanation:
The given parameters are;
The mass of Ida, M = 4 × 10¹⁶ kg
The radius of 234 Ida, r = 16 km = 16,000 m
The speed, v, required to put a rock in 234 Ida's orbit near its surface is given by the orbital velocity equation as follows;
[tex]v = \sqrt{{\dfrac{G \times M}{r} } }[/tex]
Where;
G = The universal gravitational constant = 6.67408 × 10⁻¹¹ m³·kg⁻¹·s⁻²
Substituting the known values gives;
[tex]v = \sqrt{{\dfrac{6.67408 \times 10^{-11} \times 4 \times 10^{16}}{16,000} } } \approx 12.917[/tex]
Therefore, the speed required to put a rock in 234 Ida's orbit near its surface = v ≈ 12.917 m.
Identify the particle that is NOT a subatomic particle.
es
A)
electron
B)
neutron
C
positron
D)
proton
Answer:
C
positron
Explanation:
A truck travels at a constant acceleration of 3.6 m/s2. Find the mass of the truck if a
39,600 N net force is required to produce this acceleration.
Answer:
The mass of the truck is 11,000 Kg.
Explanation:
Mechanical Force
According to the second Newton's law, the net force exerted by an external agent on an object of mass m is:
F = m.a
Where a is the acceleration of the object.
It's given a truck travels at a constant acceleration of [tex]a=3.6~m/s^2[/tex] when a net force of F=39,600 N is applied.
To find the mass of the truck, solve the equation for m:
[tex]\displaystyle m=\frac{F}{a}[/tex]
[tex]\displaystyle m=\frac{39,600}{3.6}[/tex]
Operating:
m = 11,000 Kg
The mass of the truck is 11,000 Kg.
Section 1: Experimental Overview
Use your answers from questions 1-3 as the basis for the first section of your lab report. This section provides your reader with background information about why you conducted this experiment and how it was completed. Outline the steps of the procedure in full sentences. It also provides potential answers (your hypothesis/es) relative to what you expected the experiment to demonstrate. This section should be 1-3 paragraphs in length.
Answer:
1-state what the lab is about, that is, what scientific concept (theory, principle, procedure, etc.) you are supposed to be learning about by doing the lab. You should do this briefly, in a sentence or two. If you are having trouble writing the opening sentence of the report, you can try something like: "This laboratory experiment focuses on X…"; "This lab is designed to help students learn about, observe, or investigate, X…." Or begin with a definition of the scientific concept: "X is a theory that…."
2-give the necessary background for the scientific concept by telling what you know about it (the main references you can use are the lab manual, the textbook, lecture notes, and other sources recommended by the lab manual or lab instructor; in more advanced labs you may also be expected to cite the findings of previous scientific studies related to the lab). In relatively simple labs you can do this in a paragraph following the initial statement of the learning context. But in more complex labs, the background may require more paragraphs.
Explanation:
True or False? The horizontal component of velocity of a projectile remains constant; the vertical component of velocity changes throughout the trajectory.
Answer:
False!!
Explanation:
which term describe the substance that forms when two or more types of atoms join?
A. element
B. compound
C. composite
D. mixture
Answer:
A. element
Explanation:
A molecule is formed when two or more atoms join together chemically. If atoms combine that are of two or more different elements, we call that a compound. All compounds are molecules, but not all molecules are compounds.
a beaker weighs 0.4N when empty and1.4N when filled with water what does ot weigh when filled with brine of density 1.2 g/cm3
Answer:2.47
Explanation:
So, the beaker weighs 1.40N when filled with water, brine of density weighs about 1.7N, you add the density + water. Have a good day!
PLEASEEE HELPPP!!!!
A mover slides a refrigerator weighing 650 N at a constant velocity across the floor
a distance of 8.1 m. The force of friction between the refrigerator and the floor is
230 N. How much work has been performed by the mover on the refrigerator?
Answer: The work is 1863 N*m
Explanation:
We can define work as:
W = F*d
Where F is the force that the mover needs to apply to the refrigerator, and d is the distance that the refrigerator is moved.
To move the refrigerator, the minimal force that the mover needs to do is exactly the friction force (In this case, the refrigerator will move with constant speed).
Then we will have:
F = 230 N
and the distance is 8.1 meters, then the work will be:
W = 230N*8.1 m = 1863 N*m
Calculate What is the atomic number of
a sodium atom that has 11 protons and 12 neutrons
Answer:
11 because the number of protons is the atomic humber
Explanation:
Read the following dream interpretation and answer the question that follows.
"I suspect that the patient's dream of being chased originates from his unresolved feelings of guilt during childhood."
What perspective of dream interpretation is being offered?
A. Freudian
B. activation-synthesis
C. Jungian
D. motivation
Answer:
Freudian
Explanation:
Answer:
Freudian
Explanation:
sonu and meenu build a circuit like the one shown below.name the component laballed X. What are sonu and meenu using the component labelled X to measure?
Answer:
this conponent is a bulb
and is used to measure brightness
A metre rule is used to measure a length. Which reading is shown to the nearest millimetre? A 0.7m B 0.76m C 0.761m D 0.7614m
Answer:
none
Explanation:
~both of them show to the nearest metre.
~millimeter has (mm) unit eg 0.7mm
0.76cm is the correct answer
bcoz after Mili metre there is centi metre so option c is correct
[tex]\frak{\huge{Mark \: me \: brainliest}}[/tex]
Does an object with constant speed also have constant velocity?. Single choice.
Answer: No, constant speed does not mean constant velocity.
A classic often used example would be to consider a car driving in circles. If the speedometer reads say 20 mph the entire time, then the speed of the car is held constant (ie the same). But the velocity is changing because velocity measures direction along with speed. The car is changing direction as it moves in a circle.
Calculate the electric field when the forces is 2N and the medium is mica
Answer:
E₀ = 5.97 10⁸ N / C
Explanation:
Coulomb's law in a material medium is written
[tex]F = \frac{1}{4\pi \epsilon } \frac{q_{1} q_{2} }{r^{2} }[/tex]
ε is the electrical permittivity of the material
Electric field and force are related
F = q E
in dielectric materials such as mica there is an electric field inside the material that decreases the external field
E = E₀ /ε
where ε is the electrical permittivity of the material; in general it is tabulated in the form
[tex]\epsilon _{r} =\frac{\epsilon}{\epsilon_{o}}[/tex]
[tex]\epsilon = \epsilon_{r} \ \epsilon_{o}[/tex]
we substitute
F = q E₀ / \epsilon_{r} \epsilon_{o}
[tex]E_{o} = \frac{F \ \epsilon_{r} \ \epsilon_{o} }{q}[/tex]
for the case of mica it is equal to er = 5.4 and suppose a test charge equal to the charge of the electron
we calculate
E₀ = 2 5.4 8.85 10⁻¹² / 1.6 10⁻¹⁹
E₀ = 59.74 10⁷
E₀ = 5.97 10⁸ N / C
Two skaters A and B. having masses 50 kg and
70 kg respectively, stand facing each other 6 m
apart on a horizontal smooth surface. They pull
on a rope stretched between them. How far does
each move before they meet?
(A) both move 3 m
(B) A moves 2.5 m and B moves 3.5 m
(C) A moves 3.5 m and B moves 2.5 m
(D) both move 4 m
(E) none of the above
Answer:
Explanation:
Hell im good dude
(Blank) is caused by plate motion.
It’s please help.
Answer:
heat
Explanation:
Two lamps rated 60W; 240V and 100W, 240Vrespectively are connected in series to a 240V power source. Calculate;
a) The resistance of each lamp.
b) The effective resistance of the circuit.
c) The current passing the lamps. pls answer correctly
Answer:
See the answers below.
Explanation:
The total power of the circuit is equal to the sum of the powers of each lamp.
[tex]P=60+100\\P=160 [W][/tex]
Now we have a voltage source equal to 240 [V], so by means of the following equation we can find the current circulating in the circuit.
[tex]P=V*I[/tex]
where:
P = power [W]
V = voltage [V]
I = current [amp]
[tex]I = P/V\\I=160/240\\I=0.67 [amp][/tex]
So this is the answer for c) I = 0.67 [amp]
We know that the voltage of each lamp is 240 [V]. Therefore using ohm's law which is equal to the product of resistance by current we can find the voltage of each lamp.
a)
[tex]V=I*R[/tex]
where:
V = voltage [V]
I = current [amp]
R = resistance [ohms]
Therefore we replace this equation in the first to have the current as a function of the resistance and not the voltage.
[tex]P=V*I\\and\\V = I*R\\P = (I*R)*I\\P=I^{2}*R[/tex]
[tex]60 = (0.67)^{2}*R\\R_{60}=133.66[ohm] \\and\\100=(0.67)^{2} *R\\R_{100}=100/(0.66^{2} )\\R_{100}=225 [ohm][/tex]
b)
The effective resistance of a series circuit is equal to the sum of the resistors connected in series.
[tex]R = 133.66 + 225\\R = 358.67 [ohms][/tex]
draw position time graph when speed is increasing
Explanation:
We need to draw position-time graph when the speed is increasing.
The slope of position-time graph gives the speed of an object.
Position means distance covered.
When the speed of an object is increasing with time. It means it is moving with increasing speed.
The attached figure shows the position -time graph when speed is increasing.
Which cell structure is found in plant cells, but not in animal cells?
Answer:
Cell wall and chloroplasts (only for leaves)
Explanation:
All plant cells have cell walls to give the cell a fixed shape but animal cells do not have cell walls. Some cells like leaf cells have chloroplasts to make their own food for the plant while animal cells do not have chloroplasts.
Which of the following best describes why understanding a watershed and its boundaries is important in designing housing developments along a river?
A
The water contained in a watershed is more likely to become polluted if the soil has high permeability, so it is important to locate all point sources to reduce contamination
B
Watersheds provide habitats for hundreds of marine species, so it is important to protect their feeding and nesting sites when designing housing for humans.
c
Watersheds provide space for cultivating land to produce food and other products, so it is important to avoid locating a housing development on the most fertile land.
D
Surface water and stormwater runoff will drain downstream within the watershed boundaries, so it is important to understand the flow of water through the watershed
Answer:
d
Explanation:
The watersheds are the major hydrological structures that supports the downstream of surface water and storm water. Hence, option (D) is correct.
The given problem is based on the concept and fundamentals of watershed boundary. The watershed boundary is defined as the topmost elevations surrounding the lake or river segment, such that the drop of water falling outside the boundary will drain to another watershed.
Watersheds are the naturally occurring boundaries that determine into which streams, rivers, and oceans water naturally flows.It is necessary to plot out the concept of watershed because the surface water and storm water runoff will drain downstream within the watershed boundaries.Thus, we can conclude that the watersheds are the major hydrological structures that supports the downstream of surface water and storm water. Hence, option (D) is correct.
Learn more about the watershed boundary here:
https://brainly.com/question/1771000
‼️can someone help me‼️
• What are the other two ways that you can rewrite the
formula F=ma?
• If I push a wheelbarrow, with a force of 240 N, with an
acceleration of 4 m/s2, how much mass does the
wheelbarrow have? (Solve using formula F=ma)
Answer:
Part A:
The other two ways we can rewrite F = m·a are;
1) F = dp/dt
2) F = m × d(v)/dt
Part B:
The mass of the wheelbarrow is 60 kg
Explanation:
Part A:
The other two ways of rewriting the equation are;
1) Force as the rate of change of momentum, F = dp/dt = d(m·v)/dt and
2) From the above equation, where, m is constant, we have;
F = d(m·v)/dt = m × d(v)/dt
∴ F = m × d(v)/dt
Part B:
The force with which we push the wheelbarrow = 240 N
The acceleration, a, given to the wheelbarrow (by the applied force) = 4 m/s²
From F = m × a
Where;
m = The mass of the wheelbarrow
m = F/a = 240 N/(4 m/s²) = 60 kg
The mass of the wheelbarrow = m = 60 kg.
How do bubbles support the atomic theory?
A. The bubbles are lighter than air.
B. There is matter that cannot be seen inside the bubbles.
C. The bubbles will burst before long.
D. The bubbles cannot be broken into smaller pieces.
Answer:
The answer is probably B or C
Option B supports the atomic theory. Thus, this option is correct.
Atomic theory is the theory which states that matter is composed of particles called atoms. It tells us that all the matters are made of very tiny particles called atoms and all atoms of the same kind have the same size in any object.
Let's look at all the options given,
A-The bubbles are lighter than air- The bubble consists of water and air thus they are not lighter than air. This statement does not tell anything about the atomic theory. Hence this option is not correct.B. There is a matter that cannot be seen inside the bubbles-The bubble is made up of two kinds of atoms one is oxygen and another is hydrogen. When we feel air into a soap bubble solution molecules want to attract to each other again so they wrap around the burst of air to attach to each other again. These atoms cannot be seen inside the bubbles but this option support the atomic theory. Thus, this option is correct.C. The bubbles will burst before long-In the bubble there is water. When this water loss in some way the bubble pops up. This water can be lost when it comes to contact with dry fingers or objects. It can be burst when the atmosphere is very dry. All the atoms are attracted towards. D. The bubbles cannot be broken into smaller pieces-This option does not support the atomic theory thus this is not the correct option.
Hence the option B supports the atomic theory. Thus, this option is correct.
For more about the atoms follow the link below-
https://brainly.com/question/13981855
newtons _ law of motion states that every action has an equal and opposite reaction
Answer:
3rd
Explanation:
3rd
A phone's weight is 50 Newtons. It is on top of a
.75m table. How much Potential Energy does it have?
Why are the inner plaets smaller
Answer:
The inner planets are much smaller than the outer planets and because of this have relatively low gravity and were not able to attract large amounts of gas to their atmospheres.
Which statement is true?
Every magnesium (Mg) atom has atomic number of 12.
Every magnesium (Mg) atom has a mass number of 24.
this is science but i just put physics
Answer:
Every magnesium (Mg) atom has atomic number of 12.
Explanation:
Magnesium (Mg) is a chemical element of great importance for plants, animals, and humans.
Alkaline earth metal, magnesium is obtained by electrolysis of magnesium chloride solution.
Magnesium burns with a shining flame. Magnesium is a good reducing agent. This property is used to obtain some other metals.
What type of sonar causes loud noises in the water?
Answer:
low frequencies
Explanation:
The type of sonar that causes loud noises in the water is known as active sonar.
Active sonar is a system that emits sound waves into the water and listens for their reflections to detect objects and measure distances. It works by sending out a pulse of sound, which travels through the water and reflects off objects such as submarines, ships, or marine life.
The reflected sound, or echo, is then received by the sonar system's hydrophone, allowing it to analyze the data and provide information about the surrounding environment.
While active sonar is effective for detecting objects and underwater features, it can also produce loud noises that may have various effects on marine life.
The loud sound pulses can potentially disturb or harm marine animals, particularly marine mammals like whales and dolphins, which rely heavily on sound for communication and navigation. The use of active sonar has been a topic of environmental concern, and efforts are made to minimize its impact on marine ecosystems through regulations and responsible use.
Hence, The type of sonar that causes loud noises in the water is known as active sonar.
To know more about sonar here
https://brainly.com/question/29887779
#SPJ2
A molecule of water H2O and a molecule of methane CH4 have close to the same mass Which statement explains why water has much higher boiling point than methane?
A. There is hoydrogen bonding between water molecules?
B. There is ionic bonding between water molecules
C. There is hydrogen bonding between methane molecules
D. There is ionic bonding between methane molecules
Answer:
A. There is hydrogen bonding between water molecules
Explanation:
Boiling point is a physical property of matter. It is typically conditioned by the intermolecular forces present between the molecules of a compound.
The nature of the intermolecular forces between the molecules of water is very different from those of methane. Water molecules have hydrogen bonds within their molecules. These intermolecular bonds are very strong compared to the london dispersion forces in methane. Hydrogen bond forms when the hydrogen of one molecule binds with the oxygen of another molecule.Answer:
A)
Explanation:
There is hydrogen bonding between water molecules
PLEASE ANSWER QUICK!
Meiosis is a process that contributes to______
A. the production of somatic cells.
B. asexual reproduction.
C. creation of organisms with unique characteristics.