To find the density of the unknown piece of metal, we can use the formula:
Density = mass / volume.
How to find the density ?The volume of the metal can be calculated by deducting the starting water volume (50.0 ml) from the final water volume (53.4 ml) after the metal is introduced. We know the mass of the unknown metal is 23.5 g.Volume of metal = 53.4 ml - 50.0 ml = 3.4 ml.Now we can substitute the values into the density formula: Density = 23.5 g / 3.4 ml = 6.9 g/ml.Therefore, the density of the unknown piece of metal is 6.9 g/ml.To know more about density , check out :
https://brainly.com/question/1354972
#SPJ1
If sugar was broken back down into CO2 and H2O what kind of change would that be?
A. Chemical change
B. Radical change
or
C. Physical change
Answer: chemical change
Which type of sedimentary rock forms from weathered sediment?
Answer:
Clastic or detrital sedimentary rocks are made from pieces of bedrock, sediment, derived primarily by mechanical weathering.
Explanation:
which nucleus experiences a stronger net force holding its protons and neutrons togeter unanium or or barium
Answer:
Uranium experiences a stronger net force holding its protons and neutrons together than barium.
Explanation:
A solution was prepared by dissolving 105.0 g of KCl in 215 g of water.
What is the molality (in m) of KCl in this solution?
(Round your answer to TWO places past the decimal)
Considering the definition of molality, the molality of the KCl in the solution is 6.56 moles/kg.
Definition of molalityMolality, or molal concentration, is the amount of a substance dissolved in a given mass of solvent. It is defined as the moles of a solute per kilogram of solvent.
The Molality of a solution is determined by the expression:
molality= number of moles of solute÷ kilograms of solvent
Molality in this caseIn this case, you know:
mass of KCl= 105 gmass molar of KCl= 74.55 g/molenumber of moles of solute= mass of KCl÷ mass molar of KCl= 105 g÷ 74.55 g/mole= 1.41 molesMass of solvent = 215 g of water= 0.215 kg (being 1000 g=1 kg)Replacing in the definition of molality:
Molality= 1.41 moles÷ 0.215 kg
Molality= 6.56 moles/kg
The molality of the solution is 6.56 moles/kg.
Learn more about molality:
brainly.com/question/20366625
brainly.com/question/4580605
#SPJ1
What is the density of a 1209 kg object that is 1.94 m3 in size?
Answer:
623 kgm^-3
Explanation:
Density = Mass/Volume
Mass = 1209 kg
Volume = 1.94 m^3
Density = 1209 / 1.94 kgm^-3
= 623.1958763 kgm^-3
= 623 kgm^-3 (3sf)
You are marooned on a sandy island surrounded by ocean water. A stagnant, murky, looking pond contains the only available water on the island. In your survival kit, you have the following items:
-One nylon jacket
-One plastic cup
-Two plastic bags
-One length of rubber tubing
-One knife
-One 1-L bottle of liquid bleach
-One 5-L glass bottle
-One bag of salted peanuts
Describe a plan to produce drinkable water using only the items available and the sun. Use pictures as necessary.
Answer:
Step 1: Use the kn*fe to cut the rubber tubing into two pieces.
Step 2: Use one plastic bag to filter the pond's murky water. Place the bag over the plastic cup and pour the water into it.
Step 3: Place the filtered water from the plastic bag into the 5-L glass bottle.
Step 4: Add a few drops of the liquid bleach to the water in the glass bottle.
Step 5: Place the nylon jacket over the top of the glass bottle and secure it with the rubber tubing.
Step 6: Place the glass bottle in direct sunlight and let it sit for at least an hour.
Step 7: Remove the nylon jacket and rubber tubing from the glass bottle.
Step 8: Use the second plastic bag to filter the water from the glass bottle.
Step 9: Enjoy the drinkable water!
Explanation:
How many moles of gas are present if P=1atm, V=1L, T=1K?
it depends on the chemical's molar mass
O.12
8.314
01
The number of moles of the ideal gas is 0.12 moles. Option A
What is the number of moles?In the context of the problem that we have here, we are looking at the ideal gas equation. When we look at the idea gas equation, we can tell that we would have the pressure of the gas, the volume of the gas as well as the temperature of the gas in view as is the case that we have here.
Thus, the idea that we are asked to pass across in the question is that we should be able to find out the number of moles that we have in the compound that have the variables that have been listed here.
Pressure (P) = 1 atm
Volume (V) = 1 L
Temperature (T) = 1 K
Number of moles (n) = ?
Using;
PV = nRT
n = PV/RT
n = 1 * 1/0.082 * 1
n = 0.12 moles
The moles of the gas is 0.12 moles.
Learn more about ideal gas:https://brainly.com/question/28257995
#SPJ1
Which of the following relations are functions?
Helen knit a total of 175 centimeters of scarf over 35 nights. How many nights will Helen have to spend knitting in order to knit a total of 180 centimeters of scarf? Solve using unit rates.
Helen takes 35 nights to knit a total of 175 centimeters of scarf. Hence, she will take 36 nights to knit 180 centimeters of scarf.
What are length units?Length is a basic measurement in for an object which is basically taken in meters or centimeters. The basic unit of length in American standard is meters (m) and in CGS system it is centimeters.
It is given that, Helen knit a total of 175 centimeters of a scarf over 35 nights. Then, the length she knit in one nigh is calculated as:
175/35 = 5 cm.
Therefore, the number of nights required to complete 180 cm is :
180 /5 = 36
Thus, she will take 36 nights to knit a total of 180 cm of scarf.
Find more on length units:
https://brainly.com/question/3217720
#SPJ1
1. what are the methods of vegetative propagation
2.give examples of organisms exihibiting each type
3.tubers-definitio example potatoes
science subject
Natural vegetative propagation uses bulbils, aerial shoots, roots, underground stems, and subaerial stems. Utilizing unique vegetative components, artificial vegetative propagation is accomplished.
What is vegetative propagation, and how does it work?The production and growth of a new plant through asexual means or from a plant fragment is known as vegetative propagation. There is no gamete production or fertilization throughout the process of propagation.
What are some instances of vegetative tuber propagation?In this procedure, tubers—modified roots—grow into new plants. In some plant species, adventitious buds even grow on the roots. If the correct circumstances are present, these buds develop into new plants or sprouts. Sweet potato and dahlia are two examples.
To learn more about vegetative propagation visit:
brainly.com/question/1213600
#SPJ1
What mass of 65% and 20% nitric acid must be mixed to produce 4.5 kg of 30% nitric acid?
The mass of 65% and 20% nitric acid that must be mixed to produce 4.5 kg of 30% nitric acid are 1.306 kg and 3.189 kg respectively.
What is the volume of 4.5 kg of 30% nitric acid?The volume of 4.5 kg of 30% nitric acid is determined using the formula below:
Volume = mass/densityThe density of 30% nitric acid is 1.18 g/mL
The mass of the 30% nitric acid is 4.5 kg or 4500 g
Hence, the volume will be:
The volume of 30% nitric acid = 4500 / 1.18
The volume of 30% nitric acid = 3813.56 mL
The volume of 65% and 20% nitric acid required is then determined.
Let the volume of the 65% and 20% nitric acid be x and y respectively;
x + y = 3813.56 ---(1)
amount of acid in 3813.56 ml solution = 30% * 3813.56
amount of acid in 3813.56 ml solution = 1144.07 mL
therefore;
60% * x + 20% * y = 1144.07 mL
0.6x + 0.2y = 1144.07 ----(2)
Solving for x and y in the two equations
From (1), x = 3813.56 - y
Substitute x = 3813.56 - y in (2)
0.6(3813.56 - y) + 0.2y = 1144.07
0.4y = 1144.07
y = 2860.18 mL
x = 3813.56 - 2860.18
x = 953.38 mL
The mass of the acids required is then determined as follows:
The density of 60% nitric acid is 1.37 g/mL
Mass of 60% nitric acid required = 953.38 mL * 1.37 g/mL
Mass of 60% nitric acid required = 1306 g or 1.306 kg
The density of 20% nitric acid is 1.115 g/mL
Mass of 20% nitric acid required = 2860.18 mL * 1.115 g/mL
Mass of 20% nitric acid required = 3189 g or 3.189 kg
Learn more about mass, density, and volume at: https://brainly.com/question/26364788
#SPJ1
Please help!!
See attachment
In KClO3, the proportions of K, Cl, and O are 31.9%, 28.9%, and 39.1%, respectively.
KClO3: Is it an acid or a base?There are three ways to define bases and acids. A strong base and a strong acid, respectively, called KOH K O H and HClO3 H C l O 3, react to form KClO3 K C l O 3, a salt.
Who or what is KClO3?A powerful oxidising agent with several applications is potassium chlorate (KClO3). It is or has formerly been a part of fireworks, explosives, safety matches, and disinfectants. The disproportionation of sodium hypochlorite results in the formation of sodium chloride and sodium chlorate initially.
To know more about KClO3 visit:-
https://brainly.com/question/19131349
#SPJ1
What would be the electron configuration for neutral oxygen? Please show what energy level each electron is in using the electron diagonal filling rule do not use noble gas configuration.
Answer: 1s2 2s2 2p4
Explanation:
Recall the number of electrons an orbital can have:
s orbitals have 2, p orbitals have 6, d orbitals have 10, f orbitals have 14, and so on.
Oxygen in its neutral state would have 8 electrons.
To summarize the diagonal filling order, it goes from the least energy level to the most, and the orbital with the least amount of orbitals to the most.
So, the order for this will go from 1 and end at 2 (for energy level,) then s, s again (as energy level 1 has 1s orbital only,) and p.
So, the first energy level, 1s2 (2 electrons), leaves the remaining six electrons.
Completely fill the s orbital (another 2 electrons), and the remaining 4 electrons will be in the respective p orbital.
Thus, it is 1s2 2s2 2p4.
During the electrolysis of molten sodium chloride, which ion discharges at the anode?
Answer:
it should be chlorine gas
Explanation:
A chemist has one solution that is 30.% acid and another solution that is 18% acid. How much of each solution should be used to get 300. L of a solution that is 21% acid?
a. 23 L of the 30.% solution and 277 L of the 18% solution
b. 75 L of the 30.% solution and 225 L of the 18% solution
c. 131 L of the 30.% solution and 169 L of the 18% solution
d. 138 L of the 30.% solution and 162 L of the 18% solution
e. 244 L of the 30.% solution and 56 L of the 18% solution
There is a golden rule of solubility, non polar solute dissolve in non polar solvent and polar solute dissolve in polar solvent. Therefore, the correct option is option B.
What is solution?
Solution is a homogeneous mixture of two or more than two substances. A solution is a homogeneous mixture of solute and solvent molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution.
There are two types of mixture that is homogeneous and heterogeneous. Solution is a homogeneous solution. The nature of solvent tells about whether the solvent is in liquid, solid or gas form.
Let amount of 30% to mix, be X
Then amount of 18% to mix = 300 - X
0.3X + 0.18(300 - X) = 0.21(300)
0.3X+ 0.18(300) - 0.18X= 0.21(300)
0.3X - 0.18X =0 .21(300) -0 .18(300)
0.12X =0 .03(300)
X=75L
Therefore, the correct option is option B.
To know more about solution, here:
https://brainly.com/question/13812915
#SPJ1
To write a number in scientific notation:
a.)move the decimal place until there is a number between one and ten
b.) Write x 10 to the right of the number
C.)count the number of times the decimal had to move and write this as an exponent
D) if it was a BIG number, it should be positive if it was a small number (less than 1) it should be negative
3.00 x 108 m/s should be written in scientific notation. Medical Notation (numbers less than 1.0) Add a decimal place after the decimal, to the right. To the left of the decimal point, there should only be one number. The brand-new number ranges from 1.0000 to 9.9999.
How to write a number in scientific notation?For the purpose of providing an exact result, certain elements of scientific notation must be included. In scientific notation, all numbers have the format "m x 10n. Important components for determining the scientific notation include the following:
Decimal: You move the decimal a specific number of times to the right or left of the coefficient to discover the scientific notation until it becomes a number equal to or greater than one and less than 10.
Coefficient: To calculate this value, the decimal point must move a predetermined amount of times. An amount that is one or larger and less than ten is referred to as a coefficient.
Base: The base number is always 10. The exponent comes into play when multiplying to arrive at the final solution.
Learn more about scientific notation here: https://brainly.com/question/6459088
#SPJ1
Give two ways a globe is like the earth and two ways a globe is not like the earth.
Its a homework question and I'm to lazy to think HELP PLEASE
Answer:
A glove is like the earth because...
A globe is like the earth in that it is a three-dimensional representation of the earth's features, such as countries, oceans, and landmasses.
A globe is also like the earth in that it can rotate on its axis, which allows the viewer to see different parts of the earth depending on the angle of rotation.
A globe is not like the earth because...
A globe is not like the earth in that it is typically much smaller than the earth.
A globe is also not like the earth in that it does not depict the earth's relief features, such as mountains and valleys, in their true proportion to the rest of the earth's surface.
A globe is like the earth in that it is a scaled-down, spherical model of the earth's surface, representing physical features accurately. However, a globe is not like the earth because it is much smaller and does not rotate or revolve.
Explanation:The globe and the earth are similar in two main ways. First, a globe is a scaled-down model of the earth, showing an accurate representation of the earth's surface. This includes physical features such as continents, oceans, and countries, which are mapped out precisely. Second, a globe is spherical, just like the earth.
However, there are differences between a globe and the earth. One key difference is the scale: the earth is far larger than any globe. The most obvious point of difference is the size: while a globe is small enough to be held in your hands or placed on a desk, the earth has a diameter of approximately 7,917.5 miles. Also, the globe is a static object, it does not rotate on its axis or revolve around the sun like the earth does.
Learn more about Globe and Earth here:https://brainly.com/question/13254506
#SPJ2
how many grams of hexane(C6H14) would be need to make 562 of carbon dioxide
The mass of hexane, C₆H₁₄ that would be needed to produce 562 grams of carbon dioxide, CO2 is 183 g
How do I determine the mass of hexane, C₆H₁₄ needed?We'll begin by writing the balanced equation for the reaction.
2C₆H₁₄ + 19O₂ → 12CO₂ + 14H₂O
The following are obtained from the equation:Molar mass of C₆H₁₄ = 86 g/molMass of C₆H₁₄ from the balanced equation = 2 × 86 = 172 g Molar mass of CO₂ = 44 g/molMass of CO₂ from the balanced equation = 12 × 44 = 528 gFrom the balanced equation above,
528 g CO₂ were produced from 172 g of C₆H₁₄
With the above information, we shall determine the mass of hexane, C₆H₁₄ needed to produce 562 g CO₂. Details below:
From the balanced equation above,
528 g CO₂ were produced from 172 g of C₆H₁₄
Therefore,
562 g of CO₂ will react to produce = (562 × 172) / 528 = 183 g of C₆H₁₄
Thus, the mass of hexane, C₆H₁₄ needed is 183 g
Learn more about mass:
https://brainly.com/question/25824598
#SPJ1
How many moles of magnesium atoms react with 1 mole of oxygen molecules?
1 mole of magnesium atoms will react with 2 moles of oxygen molecules. This is because the chemical equation for the reaction between magnesium and oxygen is: Mg + O2 → MgO.
What is chemical equation?A chemical equation is a symbolic representation of a chemical reaction, showing the reactants (starting materials) on the left side and the products (resulting substances) on the right side. The symbols used to represent the reactants and products are chemical formulas, which use the symbols of the elements in the reaction. The arrow between the reactants and products indicates the type of reaction taking place. The coefficients next to the symbols and formulae of entities indicate the number of moles of each species that are involved in the reaction. The overall reaction is balanced when the number of atoms of each element on the left side of the equation is equal to the number of atoms of that element on the right side of the equation.
This equation shows that for every 1 mole of magnesium atoms, 2 moles of oxygen molecules are required for the reaction to take place. Therefore, 1 mole of magnesium atoms will react with 2 moles of oxygen molecules.
To learn more about chemical equation
https://brainly.com/question/13847161
#SPJ1
HELP PLEASEUse the molar volume of a gas at SATP to determine the
following values at SATP:
(a) the amount of nitrogen in 44.8 L of pure gas
(b) the volume (in litres) of 4.8 mol of propane gas, C3H,(g)
(c) the mass of carbon dioxide in 34.6 L of carbon dioxide
gas, CO₂(g)
(d) the volume (in mL) of 1250 g of methane, CH₂(g)
(e) the amount of oxygen in 36.5 L of 02 gas
The most common example is the molar volume of a gas at standard temperature and pressure (STP), which is equal to 22.4 L for 1 mole of any ideal gas at 273.15 K and 1 atm of pressure.
What are the applications of the Ideal Gas Law- Molar Volume?Stoichiometry refers to the quantitative relationship between reactants and products. Calculating the quantities of reactants needed to make a given quantity of products, or the quantities of products resulting from a given quantity of reactants, is required in stoichiometric problems. Gas laws must be taken into account for the calculation if one or more reactants or products in a chemical reaction are gases. The findings of ideal gas law applications are often accurate to within 5%. We go over a few key ideas that are crucial for solving Stoichiometry Problems involving Gases in the sections below.
Stoichiometry and gas laws both rely on the mole notion as their foundation. A mole is an exact measurement of a substance. Based on the quantity of identities, a mole is a unit (i.e. atoms, molecules, ions, or particles). The number of identities in a mole of anything is equal to the number of atoms in exactly 12 grams of carbon-12, the most common isotope of carbon.
Learn more about Ideal Gas Law- Molar Volume: https://brainly.com/question/15132707
#SPJ1
what is a difference between mass and volume
Answer:
Volume is how much space the object is taking up, whereas mass is the measurement of the amount of matter in the object.
Explanation:
Please help me fill in the blanks
Electrons first occupy the position in lowest possible energy.
orbital diagrams:-
The higher the energy level, the Third energy the electrons in that level have. On the orbital diagram, fill in the boxes to label the representations of an orbital and a sublevel. 2 electrons can occupy a single orbital, and these electrons have Opposite spin. Within a sublevel, all the orbitals fill with one electron, each of which has the Positive spin before a second electron fills any of the orbitals.
what is Orbital?
Each energy position is made up of areas known as an orbital. An orbital is an area of probability in which electrons can be set up. Each energy position, except for the first, has further than one orbital. Each orbital has a specific shape.
To know more about Energy levels here:
brainly.com/question/29736874
#SPJ1
Balancing chemical reactions, what is it and two examples!!
PLEASE HELP I NEED THE ANSWER!!!
Giving lots of POINTS
Answer:
A balanced chemical reaction is an equation where the number of atoms of each type in the response is the same on both reactants and product sides.
Explanation: Burning, and cooking are two examples. :)
Hope you are happy :)
As long as proper
safety precautions have been taken, why can explosives be transported long distances without exploding?
organic compounds on basis of carbon skeleton
Answer:
Acyclic or Open-chain compounds. Cyclic or Closed-chain compounds.
as a sample of water is heated, the kinetic energy of its molecules increases then, the energy is used to overcome the attractions between the molecules so that they are no longer help close together. Which sections of the heating curve illustrate this process
The sections of the heating curve illustrate this process Section A followed by B. Therefore, option D is correct.
What is the heating curve ?The term heating curve is defined as the graphical representation of the correlation between heat input and the temperature of a substance.
At section, A solid Ice at temperature 0°C can heat for about 10 mins and all the energy generated from heating up the ice is used to split the bonds which binds the ice together as a solid.
At Section, B the liquid water at 100°C covert to vapor because the heat energy required here split the bond between the water molecules then they are move in random directions as vapor.
Thus, option D is correct.
To learn more about the heating curve, follow the link;
https://brainly.com/question/10481356
#SPJ1
Your question is incomplete, probably your question was
As a sample of water is heated, the energy is used to overcome the attractions between the molecules so that they are no longer held close together and can move in random directions. Then, the kinetic energy of its molecules increases. Which sections of the heating curve illustrate this process?
As a sample of water is heated, the energy is - 1
Image is attach below
PLEASE HELP! 80 POINTS
Create a VESPR drawing for
NH3
CH20
N3
SO2CI2
BrF5
The VSEPR drawing for the compounds in the question are shown in the images attached.
What is the VSEPR theory?We have to know that according to the valence shell electron pair repulsion theory, the structure of the molecule can be found by looking at the number of electron pairs that surround the central atom in the molecule.
Now the structure of the compounds as we can see in the images that ahve been attached are based on the Vlence Shell electron pair repulsion drawing for each of the compounds that we have mentioned in the question.
We can see that the structure of the compound must have a central atom and then the other atoms in the molecule are arranged around the central atom of the molecule.
The molecule would have a definite shape that is based on the number of electron shells in the molecule.
Learn more about molecule:https://brainly.com/question/19922822
#SPJ1
1.5 billion plastic bottles are bought world-wide each day. These bottles are about 9.8 inches in length (1 meter = 3.28 ft). If the Earth's diameter is about 40,000 km at the equator, how many times could you encircle the Earth with the bottles laid end to end?
Hint: Your DA table should have 5 conversion factors
The number of times 1.5 billion plastic bottles laid end to end could encircle the Earth would be 9.34 times.
Dimensional analysisSize of bottle = 9.8 inches
1 foot = 12 inches
Size of 9.8 inches bottles in foot = 0.8167 ft
Also, 3.28 ft = 1 meter
0.8167 ft = 0.8167x1/3.28
= 0.2490 meter
1000 meter = 1 km
0.2490 meter = 0.2490/1000
= 0.000249 km
Total number of bottles = 1.5 billion
Total length of 1.5 billion bottles laid end to end in kilometers = 1,500,000,000 x 0.000249 = 373,500 km
Number of times the bottle could encircle the earth = 373,500/40000
= 9.34 times
Thus, 1.5 billion plastic bottles would encircle the Earth about 9.34 times if laid end to end.
More on dimensional analysis can be found here: https://brainly.com/question/13078117
#SPJ1
list five examples of acidic oxides
8 acidic oxides, take your pick <3
Aluminium oxide.
Silicon dioxide.
Phosphorus oxides.
Sulfur oxides.
Chlorine oxides.
Iron oxides.
Chromium oxides.
Vanadium oxides
CHEMISTRY - DOES ANYONE KNOW HOW TO DO THIS QUESTION???
Cathode: 2 Ag+ (aq) + 2 e- → 2 Ag (s). Anode: 2 H+ (aq) → H2 (g) + 2 e-.
What is cathode ?
A cathode is an electrode in an electrical circuit from which electrons flow out. It is usually made of metal and is negatively charged. Cathodes are commonly used in electronic devices such as batteries, lamps, and vacuum tubes. In a battery,
the cathode is the terminal which provides a negative charge and is usually connected to the negative terminal of the battery. In a vacuum tube, the cathode is the source of electrons which flow through the tube to the anode, which is the positive terminal.
To learn about more cathode .
https://brainly.com/question/4052514
#SPJ1