a great deal of effort time and money has been spent in the quest for the so called perpetual motion machine which is defined as a hypothetical machine that operates or produces useful work indefinitrly and/or a hyponthetical machine that produces more work or energy than it consumes. explain in terms of the first law of thermodynaics why or why not such a machine is likely to be construted

Answer:

Velocity can be directly added or subtracted.

For example, if a boat has a velocity V in still water.

And now you put the boat in a river with a current that has a velocity V'

The total velocity of the boat in that river is just the addition of these two velocities.

Velocity in the river  = V + V'

Where the only tricky part is that the velocity is a vector, so you need to take in account the directions of each vector.

In this case, we have a plane with a maximum velocity of 160km, let's assume a direction for this velocity, let's say that is in the positive x-direction.

Then we can write the velocity in the vector form:

velocity  = (vel in x-axis, vel in y-axis)

The velocity of the plane can be written as:

v = (160km/h, 0)

Now we add a crosswind of 30km/h

crosswind means that it is perpendicular, then it acts on the y-axis.

Then the total velocity of the plane will be:

velocity = (160km/h, 0) + (0, 30km/h)

velocity = (160km/h, 30km/h)

Now you can compute the total velocity of the airplane as the module of that vector.

Remember that for a vector (x, y) the module is:

mod = √(x^2 + y^2)

Then the module of the velocity is:

v = √( (160km/h)^2 + (30km/h)^2) = 162.8 km/h

Answer:

/\ = 0.75m

Explanation:

v = f × /\

342.5= 457/\

/\ = 0.75m

The correct answer is: a. Maximum Kinetic energy - smaller, Period - smaller. When block 2 is placed on top of block 1 without interrupting the oscillation, the system's mass increases.

As a result, the effective mass of the combined blocks increases, which leads to a decrease in the maximum kinetic energy of the system. This is because the kinetic energy is directly proportional to the mass of the system. Additionally, the period of oscillation is determined by the mass and the spring constant of the system. With an increase in the combined mass of the blocks, the period of oscillation becomes smaller. This is because the effective mass affects how quickly the system can oscillate back and forth, and a larger mass requires more time to complete each oscillation. Therefore, when block 1 and block 2 stick together, the maximum kinetic energy decreases compared to block 1 alone, and the period of oscillation also decreases.

To learn more about Kinetic energy, Click here:

https://brainly.com/question/16012885

#SPJ11

(B) The angle of refraction when light enters glass from air will be equal to the angle of incidence. This is in accordance with Snell's law, which relates the angles and refractive indices of the media involved.

According to Snell's law, the relationship between the angle of incidence (θ₁), the angle of refraction (θ₂), and the refractive indices of the two media is given by:

n₁ sin(θ₁) = n₂ sin(θ₂),

where n₁ and n₂ are the refractive indices of the initial medium (air) and the second medium (glass), respectively.

When light travels from air to glass, the refractive index of air (n₁) is smaller than the refractive index of glass (n₂). As a result, the sine of the angle of refraction (θ₂) will be smaller than the sine of the angle of incidence (θ₁), given that the angles are measured with respect to the normal.

Since sin(θ₂) < sin(θ₁), the only way for Snell's law to hold true is if θ₂ is smaller than θ₁. Therefore, the angle of refraction will be equal to the angle of incidence, option B.

To know more about Snell's law, refer here:

https://brainly.com/question/31432930#

#SPJ4

The minimum duration of the pulse is approximately 3.27 femtoseconds. This calculation is based on the uncertainty principle and the given uncertainty in energy, wavelength, and Planck's constant.

According to the uncertainty principle in quantum mechanics, there is a fundamental limit to the precision with which certain pairs of physical properties, such as energy and time, can be simultaneously known. In the case of light, the uncertainty principle relates the uncertainty in energy (∆E) to the uncertainty in time (∆t) through the equation:

∆E ∆t ≥ h/2π

where ∆E is the uncertainty in energy, ∆t is the uncertainty in time, and h is Planck's constant (approximately 6.626 × 10^(-34) J·s).

We are given the uncertainty in energy as 1.0% of the total energy of the photons. This can be expressed as:

∆E = 0.01 × E

where E is the total energy of the photons.

The energy of a photon can be calculated using the equation:

E = hc/λ

where h is Planck's constant, c is the speed of light in a vacuum (approximately 3.0 × 10^8 m/s), and λ is the wavelength of the light.

Substituting the given wavelength into the equation:

E = (6.626 × 10^(-34) J·s × 3.0 × 10^8 m/s) / (615 × 10^(-9) m)

E ≈ 3.22 × 10^(-19) J

Substituting the value of ∆E into the uncertainty principle equation:

0.01 × E ∆t ≥ h/2π

0.01 × (3.22 × 10^(-19) J) ∆t ≥ (6.626 × 10^(-34) J·s) / (2π)

0.01 × (3.22 × 10^(-19) J) ∆t ≥ 1.05 × 10^(-34) J·s

∆t ≥ (1.05 × 10^(-34) J·s) / (0.01 × 3.22 × 10^(-19) J)

∆t ≥ 3.27 × 10^(-15) s

To convert the time to femtoseconds (fs), we multiply by 10^15:

∆t ≈ 3.27 fs

Therefore, the minimum duration of the pulse is approximately 3.27 femtoseconds.

The minimum duration of the pulse is approximately 3.27 femtoseconds. This calculation is based on the uncertainty principle and the given uncertainty in energy, wavelength, and Planck's constant.

To know more about Planck's constant visit:

https://brainly.com/question/30991884

#SPJ11

To determine the mass of air in the tank, we need to convert the given parameters and apply the ideal gas law. The mass of air in the tank is approximately 5.04 kg.

To determine the mass of air in the tank, we need to consider the ideal gas law and convert the given parameters to appropriate units.

Given:

Volume of air (V) = 2 m³

Temperature (T) = -93°C

Gauge pressure (P) = 1.4 MPa

Local atmospheric pressure (P_atm) = 1 atm

First, let's convert the temperature from Celsius to Kelvin:

T = -93°C + 273.15 = 180.15 K

Next, we need to convert the gauge pressure to absolute pressure by adding the atmospheric pressure:

P_abs = P + P_atm = 1.4 MPa + 1 atm = 2.4 MPa

Now, we can use the ideal gas law equation to calculate the mass of air (m):

PV = nRT

Where:

P = absolute pressure

V = volume

n = number of moles of air

R = ideal gas constant

T = temperature

Rearranging the equation to solve for mass (m):

m = (n * M) / N_A

Where:

M = molar mass of air

N_A = Avogadro's number

To find the number of moles (n), we can use the equation:

n = PV / RT

Given that the molar mass of air is approximately 28.97 g/mol, and the ideal gas constant R is 8.314 J/(mol·K), we can calculate the mass of air.

Calculations:

n = (P_abs * V) / (R * T)

m = (n * M) / N_A

Substituting the values:

n = (2.4 MPa * 2 m³) / (8.314 J/(mol·K) * 180.15 K)

m = (n * 28.97 g/mol) / 6.022 x 10^23 mol⁻¹

Calculating the mass of air (m):

m ≈ 5.04 kg

Therefore, the mass of air in the tank is approximately 5.04 kg.

To know more about parameters, click here https://brainly.com/question/29728062

#SPJ11

Answer:

They would all most likely have the same weight

Explanation:

Think about it the smaller the person or object the smaller the weight. But theyre all the same height now. And its not like you don't have any weight in the moon. So in conclusion they would all be the same weight

Answer:

  The wavelength of the wave is [tex]1.06\times10^6 m[/tex]  

Explanation:

Lets calculate

We know an electromagnetic wave is propagating through an insulating magnetic material of dielectric constant K and relative permeability [tex]K_m[/tex] ,then the speed of the wave in this dielectric medium is [tex]\nu[/tex] is less than the speed of the light c and is given by a relation

               [tex]\nu=\frac{c}{\sqrt{KK_m} }[/tex]  --------- 1

In case the electromagnetic  wave propagating through the insulating magnetic material , the amplitudes of electric and  magnetic fields are related as -

             [tex]E_m_a_x= \nu B_m_a_x[/tex]

The magnitude of the 'time averaged value' of the pointing vector is called the intensity of the wave and is given by a relation

                       [tex]I = S_a_v[/tex]

                        [tex]\frac{E_m_a_xB_m_a_x}{2K_m\mu0}[/tex]----------- 3

now , we will find the speed of the propagation of an electromagnetic wave by using equation 1

[tex]\nu=\frac{c}{\sqrt{KK_m} }[/tex]

Putting the values ,

   =[tex]\nu= \frac{3.00\times10^8}{\sqrt{(3.64)(5.18)} }[/tex]

 =[tex]0.6908\times10^8m/s[/tex]

 = [tex]6.91\times10^7m/s[/tex]

Now , using this above solution , we will find the wavelength of the wave -

     [tex]\lambda=\frac{\nu}{f}[/tex]

    Putting the values from above equations -

  [tex]\frac{6.91\times10^7m/s}{65.0Hz}[/tex]

        [tex]\lambda= 1.06\times10^6 m[/tex]

Hence , the answer is [tex]\lambda= 1.06\times10^6 m[/tex]

Answer:

[tex]Pressure = 29723.1\ N/m^2[/tex]

Explanation:

Given

[tex]Force = 8694N[/tex]

[tex]Length = 0.45m[/tex]

[tex]Width = 0.65m[/tex]

Required

The force exerted on the floor by the box

First, calculate the area covered by the box (i.e. the base area)

[tex]Base\ Area = Length * Width[/tex]

[tex]Base\ Area = 0.45m * 0.65m[/tex]

[tex]Base\ Area = 0.2925m^2[/tex]

Pressure is calculated as:

[tex]Pressure = \frac{Force}{Area}[/tex]

[tex]Pressure = \frac{8694N}{0.2925m^2}[/tex]

[tex]Pressure = 29723.0769231\ N/m^2[/tex]

[tex]Pressure = 29723.1\ N/m^2[/tex] --- approximated

Answer:

3. converging lens

Explanation:

When the rays of light coming parallel to principle axis after refraction through the lens passes through a point called focus, since it converge all the ray at one point, that is why it is said to be converging lens.

To attenuate the signal by only 5%, the width-to-length ratio (W/L) of the NMOS transistor should be approximately 13.125.

To determine the required W/L ratio, we need to calculate the voltage gain of the circuit and find the value of W/L that corresponds to a 5% attenuation.

First, let's analyze the circuit. We have an NMOS transistor connected in a common-source configuration, where Vin is the input voltage, Va is the gate voltage, and Vout is the output voltage.

               _______________

              |               |

  Vin -------|               |

              |               |

              |               |

              |     NMOS      |------ Vout

              |               |

              |               |

              |               |

              |_______________|

The voltage gain (Av) of the NMOS transistor in the common-source configuration can be approximated as:

Av = -k' * (W/L) * (Vin - VTh) * (1 + λ * Vout)

where k' is the transconductance parameter, W/L is the width-to-length ratio, Vin is the input voltage, VTh is the threshold voltage, λ is the channel-length modulation parameter, and Vout is the output voltage.

Since the question states that Vin is very small, we can assume that the voltage drop across R is negligible. Therefore, Va will be approximately equal to Vin.

Va = Vin

We want the circuit to attenuate the signal by only 5%. This means the output voltage (Vout) should be 95% of the input voltage (Vin).

Vout = 0.95 * Vin

Substituting Va = Vin and Vout = 0.95 * Vin into the voltage gain equation, we get:

0.95 * Vin = -k' * (W/L) * (Vin - VTh) * (1 + λ * 0.95 * Vin)

Rearranging the equation, we have:

-k' * (W/L) * (Vin - VTh) * (1 + λ * 0.95 * Vin) = 0.95 * Vin

Simplifying, we get:

-k' * (W/L) * (1 + λ * 0.95 * Vin) = 0.95

Since Vin is very small, we can assume that λ * 0.95 * Vin is negligible compared to 1. Therefore, we can approximate the equation as:

-k' * (W/L) = 0.95

Now, let's substitute the given values:

k' = 800 A/V^2

VTh = 0.5 V

-800 * (W/L) = 0.95

Solving for W/L, we find:

W/L = 0.95 / -800 ≈ -0.0011875

The W/L ratio cannot be negative, so we take the absolute value:

W/L ≈ 0.0011875

Finally, we can calculate the width (W) for a given length (L). Assuming L = 1 (arbitrary units), we have:

W = (W/L) * L ≈ 0.0011875 * 1 ≈ 0.0011875

To attenuate the signal by only 5%, the width-to-length ratio (W/L) of the NMOS transistor should be approximately 0.0011875 (or 13.125 if the length is assumed to be 1 unit).

To learn more about transistors, visit    

https://brainly.com/question/1426190

#SPJ11

I agree with Student 2: The frequency of the wave will remain the same as it is only dependent on the source, while the wavelength will increase as the wave moves into medium 2.

The equation that relates the velocity (v), frequency (f), and wavelength (λ) of a wave is:

v = f * λ

According to this equation, if the velocity increases in medium 2 compared to medium 1, and the frequency remains constant (as stated by Student 2), then the only way to maintain the equation is for the wavelength to increase in medium 2.

This behavior can be explained by the fact that different media have different properties, such as density and elasticity, which affect the propagation of the wave. When a wave travels from one medium to another, the speed of the wave can change. However, the frequency of the wave is determined by the source and remains constant. Therefore, in order to maintain the equation v = f * λ, the wavelength must adjust to compensate for the change in velocity.

In summary, Student 2 is correct in stating that the frequency of the wave will remain the same, while the wavelength will increase as the wave moves into medium 2 to keep the equation of the wave velocity valid.

To know more about frequency here

https://brainly.com/question/14316711

#SPJ4

Answer:

the catcher and outfielder

Explanation:

Answer: The catcher and the player at first base are the only players permitted to wear mitts rather than gloves. So, the answer would be 3.

Explanation: I had this on a quiz and got it right.

Hope this helps!

The amplitude of the motion is 0.02 m. The maximum speed attained by the object is 0.352 m/s.

a.

In simple harmonic motion (SHM), the displacement of an object from its equilibrium position can be described by the equation:

x(t) = A * cos(ωt + φ)

where:

x(t) is the displacement at time t,

A is the amplitude of the motion,

ω is the angular frequency,

t is the time, and

φ is the phase constant.

The speed of the object is given by:

v(t) = A * ω * sin(ωt + φ)

Mass of the object, m = 2.7 kg

Spring constant, k = 310 N/m

Displacement from equilibrium position, x = 0.02 m

Speed of the object, v = 0.55 m/s

We can relate the angular frequency (ω) to the mass and spring constant using the equation:

ω = sqrt(k / m)

Let's calculate ω first:

ω = sqrt(310 N/m / 2.7 kg) ≈ 8.064 rad/s

To find the amplitude (A), we can use the given displacement:

0.02 m = A * cos(0 + φ)

cos(0) = 1

Therefore, we have:

A = 0.02 m

The amplitude of the motion is 0.02 m.

b.

The maximum speed in simple harmonic motion occurs when the displacement is zero (i.e., at the equilibrium position). At this point, the speed is at its maximum value.

Amplitude of the motion, A = 0.02 m

We can find the maximum speed (v_max) using the equation:

v_max = A * ω

Substituting the values:

v_max = 0.02 m * 8.064 rad/s ≈ 0.352 m/s

Conclusion:

The maximum speed attained by the object is 0.352 m/s.

To know more about amplitude visit:

https://brainly.com/question/3613222

#SPJ11

The wavelength of the observed Lyman-alpha line from this quasar with a redshift of z = 3.7 will be approximately 444 nm.

The formula to calculate the observed wavelength (λ_obs) of an object with redshift (z) is given by:

λ_obs = λ_rest * (1 + z)

In this case, we are interested in the Lyman-alpha line, which has a rest wavelength (λ_rest) of 121.6 nm.

Substituting the values into the formula, we have:

λ_obs = 121.6 nm * (1 + 3.7)

λ_obs = 121.6 nm * 4.7

λ_obs ≈ 570.32 nm

However, it's important to note that the Lyman-alpha line falls in the ultraviolet (UV) region of the electromagnetic spectrum, not in the visible part.

Since the question specifically mentions that it is in the visible part, it suggests a typographical error or some other contextual discrepancy.

The wavelength of the observed Lyman-alpha line from this quasar, assuming a redshift of z = 3.7, is approximately 570.32 nm.

However, the Lyman-alpha line is in the ultraviolet (UV) region, not the visible part of the electromagnetic spectrum.

To know more about quasar visit:

https://brainly.com/question/20308478

#SPJ11

a) The wavelength of electromagnetic radiation needed to excite the electron to the n = 3 state is approximately 1808.26 nm.

b) The width of the square well is approximately 904.13 nm.

To find the wavelength of electromagnetic radiation needed to excite the electron to the n = 3 state, we can use the formula:

λ = hc / ΔE

where λ is the wavelength, h is Planck's constant (6.626 × 10⁻³⁴ J·s), c is the speed of light (2.998 × 10⁸ m/s), and ΔE is the energy difference between the two states.

First, let's convert the energy difference ΔE from electron volts (eV) to joules (J):

ΔE = (3² - 1²) x e₁

ΔE = (9 - 1) x 0.86 eV

ΔE = 8 x 0.86 eV

ΔE = 6.88 eV

Next, let's convert the energy difference ΔE from eV to joules (J):

1 eV = 1.602 × 10⁻¹⁹ J

ΔE = 6.88 x 1.602 × 10⁻¹⁹ J

ΔE ≈ 1.101376 × 10⁻¹⁸ J

Now we can calculate the wavelength λ:

λ = (hc) / ΔE

λ = (6.626 × 10⁻³⁴ J·s x 2.998 × 10⁸ m/s) / (1.101376 × 10⁻¹⁸ J)

λ ≈ 1.80826 × 10⁻⁶ m

Finally, let's convert the wavelength from meters (m) to nanometers (nm):

1 m = 1 × 10⁹ nm

λ ≈ 1.80826 × 10⁻⁶ m x 1 × 10⁹ nm/m

λ ≈ 1808.26 nm

Therefore, the wavelength of electromagnetic radiation needed to excite the electron to the n = 3 state is approximately 1808.26 nm.

To find the width of the square well, we can use the formula:

L = λ / 2

where L is the width of the square well.

Using the value we calculated for λ in part (a):

L = 1808.26/2 nm

L = 904.13 nm

Therefore, the width of the square well is approximately 904.13 nm.

To know more about electromagnetic radiation follow

https://brainly.com/question/27431416

#SPJ4

(a) The satellite takes approximately 1.47 hours to complete one orbit.

(b) The satellite's speed is approximately 7430 m/s.

(c) The minimum energy input necessary to place the satellite in orbit, starting from the Earth's surface, is approximately 7.33 x 10^9 J.

(a) To determine the time taken to complete one orbit, we can use Kepler's third law, which states that the square of the orbital period (T) is proportional to the cube of the semi-major axis (a) of the orbit.

Since the satellite is in a circular orbit, the semi-major axis is equal to the radius of the orbit, which is the sum of the Earth's radius (R) and the height above the surface (h). Using the given values, we can calculate T as follows:

T² = (4π² / GM) * a³

T² = (4π² / GM) * (R + h)³

T = √[(4π² / GM) * (R + h)³]

Substituting the known values, we find T ≈ 1.47 hours.

(b) The speed of the satellite can be determined using the formula for orbital speed:

v = √(GM / r)

where G is the gravitational constant, M is the mass of the Earth, and r is the distance from the center of the Earth to the satellite's orbit (R + h). Plugging in the values, we find v ≈ 7430 m/s.

(c) The minimum energy input required to place the satellite in orbit can be calculated as the sum of the gravitational potential energy and the kinetic energy of the satellite. The gravitational potential energy is given by:

PE = -GMm / r

where m is the mass of the satellite and r is the distance from the center of the Earth to the satellite's orbit (R + h). The kinetic energy is given by:

KE = 0.5mv²

Plugging in the values, we find the minimum energy input is approximately 7.33 x 10^9 J.

To know more about potential energy, refer here:

https://brainly.com/question/24284560#

#SPJ4

The minimum angular separation resolvable for a 200-m radio telescope investigating sources emitting a 21-cm wavelength is 0.073°.

The angular resolution of a telescope is determined by the ratio of the wavelength of the radiation being observed to the diameter of the telescope. In this case, the telescope has a diameter of 200 meters, and the wavelength being observed is 21 cm (or 0.21 m).

The formula for calculating the angular resolution is given by θ = λ/D, where θ is the angular resolution, λ is the wavelength, and D is the diameter of the telescope. Substituting the given values into the formula, we get θ = 0.21 m / 200 m = 0.00105 radians.

To convert this to degrees, we multiply by (180/π), which gives us approximately 0.073°. Therefore, the minimum angular separation resolvable for this system is 0.073°.

Learn more about angular resolution here:

https://brainly.com/question/31858807

#SPJ11

In summary, the internal energy of a thermodynamic system is the sum of the potential and kinetic energy of all the particles in the system. It is a property of the system that depends only on the current state of the system and can be affected by a number of factors such as temperature, pressure, and composition of the system.

Internal energy is the energy that is associated with the microscopic components of the system, such as molecules and atoms. The internal energy of a thermodynamic system is the total potential energy and kinetic energy of all of the particles in the system. It includes the energy that is stored in the bonds between atoms and molecules and the kinetic energy of the individual particles. The internal energy of a thermodynamic system is a property of the system that depends only on the current state of the system. It can be increased or decreased by adding or removing heat or work from the system. "The internal energy of a system can be represented by the symbol U. "There are many factors that can affect the internal energy of a thermodynamic system. These include the temperature, pressure, and composition of the system, as well as any external forces that are acting on the system. The internal energy of a thermodynamic system is a key concept in the study of thermodynamics, as it helps to describe the behavior of systems as they undergo changes in temperature, pressure, and other variables.

to know more about Internal energy visit:

https://brainly.com/question/11278589

#SPJ11

The maximum electrical force that these protons will exert on each other is 2.48 x 10^-13 N.

The electrical force between two charged particles can be calculated using Coulomb's Law:

F = (k * q1 * q2) / r^2

Where:

F is the electrical force,

k is the electrostatic constant (k ≈ 8.99 x 10^9 N m^2/C^2),

q1 and q2 are the charges of the particles (in this case, both are protons, so each charge is q = 1.6 x 10^-19 C),

and r is the distance between the particles (assuming they are in contact, r ≈ 2 x 10^-15 m).

To find the maximum electrical force, we need to calculate the force when the protons are closest to each other. This occurs when they are just about to collide, so their separation distance is equal to the sum of their radii (r ≈ 2 x 10^-15 m).

Plugging the values into the formula, we have:

F = (8.99 x 10^9 N m^2/C^2) * (1.6 x 10^-19 C) * (1.6 x 10^-19 C) / (2 x 10^-15 m)^2

F ≈ 2.48 x 10^-13 N

The maximum electrical force that these protons will exert on each other is approximately 2.48 x 10^-13 N. This force arises due to the interaction between their positive charges and is inversely proportional to the square of the distance between them.

To know more about electrostatic visit :

https://brainly.com/question/17692887

#SPJ11

Uranus and Neptune are like the other Jovian planets because they have a lot of gaseous composition, they lack a solid surface, and they are situated far from the sun.

The Jovian planets are four planets in the outer solar system that are gas giants, also known as the gas planets. They are Jupiter, Saturn, Uranus, and Neptune. In terms of the composition of Uranus and Neptune, they contain methane, ammonia, water, and other elements that form gas. Like the other Jovian planets, they lack a solid surface, and they are situated far from the sun.

The rings of Uranus and Neptune are fainter and less complex than the rings of Jupiter and Saturn, but they share certain features. Both Uranus and Neptune are thought to have a small rocky core surrounded by a mix of rock and ice, then a thick layer of metallic hydrogen, and an atmosphere mainly of molecular hydrogen and helium. So therefore because gaseous composition, lack a solid surface, and situated far from the sun, Uranus and Neptune are like the other Jovian planets.

To know more about Jovian planets visit:

https://brainly.com/question/31384996

#SPJ11

True. The Sun radiates at an effective temperature of 5780 K and has a radius of about 696,000 km.

The Sun's effective temperature refers to the temperature at which a black body (an idealized object that absorbs all incident radiation) would emit the same amount of radiation as the Sun. This value is approximately 5780 K, representing the temperature of the Sun's photosphere, the visible surface. Regarding the Sun's radius, it has an estimated average radius of about 696,000 km. This measurement defines the distance from the center of the Sun to its outer edge. The Sun is classified as a G-type main-sequence star, and its size is relatively large compared to other stars, making it an important reference point for understanding stellar characteristics.

To learn more about effective temperature, Click here:

https://brainly.com/question/30799008

#SPJ11

The tension along the chain, when an 11.7 kg hammer is whirled at a rate of 0.489 rev/s in a simple horizontal circle with a 1.2 m chain, is approximately 140.79 N.

To find the tension along the chain, we can analyze the forces acting on the hammer in circular motion.

In this case, the tension in the chain provides the centripetal force required to keep the hammer moving in a circle.

The centripetal force is given by the formula:

F = m * v² / r

Where:

F is the centripetal force

m is the mass of the hammer

v is the velocity of the hammer

r is the radius of the circular path

m = 11.7 kg

v = 0.489 rev/s (angular velocity)

r = 1.2 m

To calculate the linear velocity, we need to convert the angular velocity to linear velocity. The formula for converting angular velocity to linear velocity is:

v = ω * r

Where:

v is the linear velocity

ω is the angular velocity

r is the radius of the circular path

Substituting the values, we have:

v = 0.489 rev/s * 2π radians/rev * 1.2 m

v ≈ 3.678 m/s

Now we can calculate the centripetal force:

F = (11.7 kg) * (3.678 m/s)²/ 1.2 m

F ≈ 140.79 N

Therefore, the tension along the chain is approximately 140.79 N.

The tension along the chain, when an 11.7 kg hammer is whirled at a rate of 0.489 rev/s in a simple horizontal circle with a 1.2 m chain, is approximately 140.79 N.

To know more  about tension visit:

https://brainly.com/question/29466375

#SPJ11

The moment of inertia of the rider, box, and rocket about the pole is 170 kg * (6 m)^2 = 6120 kg · m^2.  The initial angular acceleration of the rider is 0.098 rad/s^2.

A) The moment of inertia of the rider, box, and rocket about the pole can be calculated using the formula for the moment of inertia of a point mass rotating around an axis. The moment of inertia (I) is given by the product of the mass (m) and the square of the distance (r) from the axis of rotation:

I = m * r^2

Since the mass of the rider, box, and rocket is given as 170 kg and the rod is neglected, the moment of inertia will be the same for all components. Therefore, the moment of inertia of the rider, box, and rocket about the pole is 170 kg * (6 m)^2 = 6120 kg · m^2.

B) The initial angular acceleration of the rider can be determined using Newton's second law of rotational motion, which states that the torque (τ) is equal to the moment of inertia (I) multiplied by the angular acceleration (α). The torque can be calculated as the product of the force (F) applied perpendicular to the path of the rider and the distance (r) from the axis of rotation:

τ = F * r

Rearranging the formula and substituting the given values:

α = τ / I = (98 N * 6 m) / 6120 kg · m^2 = 0.098 rad/s^2

Therefore, the initial angular acceleration of the rider is 0.098 rad/s^2.

C) The relationship between angular velocity (ω) and time (t) is given by the equation ω = α * t. Rearranging the formula to solve for time:

t = ω / α

The rider's velocity can be converted to angular velocity using the formula v = r * ω. Rearranging the formula to solve for angular velocity:

ω = v / r = 5 m/s / 6 m = 0.8333 rad/s

Substituting the values into the equation, we get:

t = 0.8333 rad/s / 0.098 rad/s^2 = 8.5 s

Therefore, the time required for the rider's velocity to reach 5 m/s is 8.5 seconds.

D) To find the mass per second that must leave the rocket to develop the given thrust (F), we can use Newton's second law of motion, which states that force (F) is equal to the rate of change of momentum (dp/dt). In this case, the force is equal to the thrust of the rocket, and the change in momentum is the mass per second leaving the rocket (dm/dt) multiplied by the exit velocity (v):

F = dm/dt * v

Rearranging the formula and substituting the given values:

dm/dt = F / v = 98 N / 390 m/s = 0.2513 kg/s

Therefore, the mass per second that must leave the rocket to develop the thrust of 98 N is 0.2513 kg/s.

To learn more about the moment of inertia click here

https://brainly.com/question/31045808

#SPJ11

The phenomenon that allows the Sun's heat to pass through to the Earth's surface while stopping it from spreading back into space is the greenhouse effect.

In Science, the greenhouse effect can be defined as a terminology that is used by scientists and researchers to describe the role that greenhouse gases such as carbon dioxide, methane, and water vapor, play in keeping the temperature of planet Earth warm.

Generally speaking, greenhouse effect help in the regulation of atmospheric temperature during the day and at night.

However, it is important to note that the greenhouse effect does not result in a fall or decrease in sea levels and lower rainfall in coastal zones.

Read more on greenhouse effect here: brainly.com/question/19521661

#SPJ4

The density of the N nucleus can be calculated by dividing its mass by its volume, the binding energy per nucleon E of the lithium isotope Li is [tex]5.6 MeV/nucleon[/tex], the energy needed to remove a proton from the nucleus of the potassium isotope K is [tex]289.77 MeV[/tex]

The mass number of N is 14 and its atomic number is 7. The number of neutrons in the N nucleus is given by [tex]14 - 7 = 7[/tex] neutrons.

The mass of one neutron is about 1.008665 atomic mass units (amu) or [tex]1.67493 \times 10^{-27} kg[/tex].

The mass of the N nucleus = [tex]7(1.008665) + 7.016004 = 14.04273 $ amu[/tex]. Thus, the density of the N nucleus can be calculated by dividing its mass by its volume.

The binding energy per nucleon E of the lithium isotope Li is 5.6 MeV/nucleon. To find its atomic mass of this isotope, the mass defect of the nucleus is calculated using the formula:

Mass defect = (Zmp + Nmn) - M

where

The mass of a proton is approximately [tex]1.00728 amu[/tex], while the mass of a neutron is approximately [tex]1.00866 amu[/tex].

The energy needed to remove a proton from the nucleus of the potassium isotope K can be calculated using the formula:

Binding energy = [tex]E \times A[/tex]

where E is the binding energy per nucleon, A is the mass number. Binding energy of K isotope = 7.43 MeV/nucleon (given)

Thus, the energy needed to remove a proton from the nucleus of the potassium isotope K is [tex]289.77 MeV[/tex].

Learn more about The density: brainly.com/question/1354972

#SPJ11

Answer:

Due to lower risk of injury or damage.

Explanation:

The high divers would choose to enter the water from the feet first because there is low risk of injury. The brain is the most important part of the body which very sensitive to any small injury. Small injury to brain leads to big problems in life. High divers can reach speeds of nearly 60 mph and enters about 28m into the water in about three seconds which can damage the head region if comes in contact with the ground so this is the reason the high divers avoid of entering in the water through their heads and choose entering through their feet.

Option (A) t = 6 , is the correct option .

The object changes direction at t = 6. The given velocity equation is v = -5t + 30, where v represents velocity and t represents time.

To determine when the object changes direction, we need to find the time at which the velocity becomes zero. The given velocity equation is v = -5t + 30, where v represents velocity and t represents time.

Setting the velocity equation equal to zero, we have:

-5t + 30 = 0

To solve for t, we can isolate t by subtracting 30 from both sides of the equation:

-5t = -30

Next, divide both sides of the equation by -5 to solve for t:

t = -30 / -5

t = 6

The object changes direction at t = 6. At this time, the velocity becomes zero.

To know more about velocity ,visit:

https://brainly.com/question/80295

#SPJ11

Explanation:

A. Up along the page

Using the law of the right hand