Answer:
Explanation:
A liquid can easily change its shape but a solid cannot because:
b. The forces between the molecules is strong in solid than in liquids.
A liquid can easily change its shape but a solid cannot because the forces between the molecules is strong in solid than in liquids. Thus Option b is the answer.
There is some kinds of forces that holds the molecules each other like for example in hydrogen chloride [ HCl ] the relatively positive hydrogen of one molecule is attracted to the negative chlorine of other due to dipole dipole interaction.
Actually structure of any molecule means combination of repulsive and attractive forces which is relatively concerned with charge and electron spin.
Solids have significant intermolecular forces so its difficult to dissociate the bonds and create a new shape , while fluids have insignificant molecular forces due to which its easier to generate new shapes.
So that's why Solids cannot change its shape with that ease as liquids do.
To know more about intermolecular forces-
https://brainly.com/question/9007693
Which has more kinetic energy, a car of mass 500 kg traveling at 15 m/s or a motorcycle of mass 250 kg traveling at 30 m/s?
The motorcycle of mass 250 kg traveling at 30 m/s will have the greater kinetic energy.
What is Kinetic energy?This is the kind of energy possessed by any body that is in motion. It is also known as the moving energy.
From the question,
the mass of the car = 500kg
velocity = 15m/s
Kinetic energy for the car is;
[tex]K = \frac{1}{2} mv^{2}[/tex]
K = 1/2 x 500 x 15 x 15
K = 56, 250J
the mass of the motorcycle = 250kg
velocity = 30m/s
Kinetic energy for the motorcycle is;
[tex]K = \frac{1}{2} mv^{2}[/tex]
K = 1/2 x 250 x 30 x 30
K = 112, 500J
In conclusion, from calculating for both, the kinetic energy possessed by the motorcycle is higher, that means it has more kinetic energy.
Learn more about Kinetic energy: https://brainly.com/question/25959744
#SPJ1
what is solenoid? define solenoid in simple words
[tex]{ \red{ \underline{ \green{ \sf{solenoid}}}}}[/tex]
Solenoid is a coil of circular turns made up of insulated copper wire wrapped closely in the cylindrical form
solenoid is formed by circular turns of copper wire in cylinder form
A grandfather clock is operated by a slowly falling mass attached to a pulley system. Winding the clock lifts the mass up again. A typical grandfather clock has a 0.750 kg mass that can fall and be lifted a height of 1.80 m. Calculate the increase in gravitational potential energy of the mass when the clock is wound.
13.23 joule is gravitational potential energy of the mass when the clock is wound.
potential energy, p = mgh
m= 0.750 kg
h= 1.80 m
g=9.8 m/s²
p = mgh
p=0.750×1.80 m×9.8 m/s²
p=13.23 joule
Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is squeezed or extended, its potential energy increases. If a steel ball is lifted above the ground as opposed to falling to the ground, it has higher potential energy. It is capable of performing more work when raised. Potential energy is a characteristic of systems rather than of particular bodies or particles; for instance, the system made up of Earth and the elevated ball has greater potential energy as they get further apart.
Potential energy develops in systems having components whose configurations, or relative positions, determine the amount of the forces they apply to one another.
To know more about potential energy visit : brainly.com/question/28988147
#SPJ9
Which of the following is accurate when discussing specific heat?
A) Specific heat values for solids will never vary for different ranges of temperature.
B) The specific heat of a gas can be measured at constant pressure.
C) Specific heat values for liquids will never vary for different ranges of temperature. D) The specific heat of a gas can be measured at constant volume only.
The statement indicating that the specific heat of a gas can be measured at constant pressure is accurate when discussing specific heat (Option B).
What is the specific heat of a gas?The specific heat of a gas is a measurement that makes reference to the relative molecular position of the molecules in a substance in the gas state, which is a state of matter where particles are more separated in space when compared with liquid and solid states.
Moreover, specific heat can be defined as the amount of heat energy that may be able to increase the temperature of 1 gr (gram) of a given material to 1 Celssius degree.
Therefore, with this data, we can see that the specific heat of a gas depends on the temperature and it expresses a given amount of heat energy in a substance or material.
Learn more about the specific heat here:
https://brainly.com/question/27991746
#SPJ1
URGENT!! ILL GIVE
BRAINLIEST!!!! AND 100 POINTS!!!!!
Answer:
1. B (graph A) 2. A (graph D) 3. D (graph B) 4. C (graph C)
Explanation:
1. Graph A gives the relationship between the speed of a car and time. Over time, the speed of the car is decreasing (moving closer to 0). Therefore, the car is slowing down.
2. Graph D gives the relationship between the distance of a car and time. Over time, the distance the car has traveled is increasing at a steady rate. Because the distance is changing, we know the car is moving. And because the slope of the line is constant, the car is moving at a constant speed.
3. Graph B gives the relationship between the distance of a car and time. This distance is not changing over time, meaning that if the car started 5 meters away, the car is still 5 meters away. Therefore, the car is not moving.
4. Graph C gives the relationship between speed and time. The speed is increasing, and therefore not constant. This means that the car is either speeding up or slowing down. Since speed is increasing (the inverse of graph A), we know the car is speeding up. When an object is speeding up, the velocity/speed and the acceleration have the same sign (both positive or negative). Our speed values are all positive, so our acceleration must also be positive.
An airplane on a runway accelerates at 4.0 meters/second^2 for 28.0 seconds before takeoff. How far does the plane travel on the runway before
takeoff?
Answer:1568 meters
Explanation:
we will make a speed time graph and we will calculate the speed by multiplying acceleration with time and we will have the speed then we will draw it on the speed time graph this will make a triangle and we will calculate its area and we will have the distance.
Calculate the combined mass of the two people if the tension of the cable is 1205.4 N
Answer:
Let
T
be the tension of the cable and m
g
be the force of gravity. If the upward direction is positive, then Newton’s second law is T−mg=ma, where a is the acceleration. Thus, the tension is T=m(g+a). We use constant acceleration kinematics (Table 2-1) to find the acceleration (where v=0 is the final velocity, v
0
=−12m/s is the initial velocity, and y=−42m is the coordinate at the stopping point). Consequently, v
2
=v
0
2
+2ay leads to
a=−
2y
v
0
2
=−
2(−42m)
−12m/s
=1.71m/s
2
We now return to calculate the tension:
T=m(g+a)
=(1600kg)(9.8m/s
2
+171m/s
2
)
=1.8×10
4
N
Answer:
Explanation:
Given:
P = 1205.4 N
g = 9.8 m/s²
___________
m - ?
m = P / g
m = 1205.4 / 9.8 ≈ 123 kg
A body moving with uniformly acceleration A has two point (5,15) and ( 20,60) on the velocity time graph of its motion. Calculate A. Pls I would like if the graph can be drawn I have the workings
Answer:
3 m/s
Explanation:
The slope of a velocity-time graph will give the acceleration for the object over the given interval.
Finding the slope:
[tex]a = \frac{y_2 - y_1}{x_2 - x_1} = \frac{60 - 15}{20 - 5} = \frac{45}{15} = 3\\[/tex]
The acceleration A would be 3 m/s
What is the resulting acceleration when a 120 N force acts on an object with a mass of 360kg?
Answer:
Below
Explanation:
Remember:
F = m a
F/m = a = 120 / 360 = 1/3 m/s^2
Radio waves and microwaves have what type of frequency and
wavelength?
A.low frequency & long wavelength
B.high frequency & short wavelength
C.medium frequency & long wavelength
D.High frequency & long wavelength
Radio waves and microwaves have A.)low frequency and long wavelength.
What type of frequency and wavelength do radio and microwaves have?
Microwaves are classified as radio waves, but they have higher frequencies than other radio waves. And so with higher frequencies, they also have more energy. That's is the reason, microwaves are useful for heating food in microwave ovens.
Microwaves have a long wavelength, but not as long as radio waves. The atmosphere of earth is transparent to some wavelengths of microwave radiation. The longer wavelengths pass through the atmosphere of earth more easily than the shorter wavelength microwaves.
Radio waves have photons with the low energies and microwaves have more energy as compared to radio waves.
To know more about radio and microwaves, refer
https://brainly.com/question/1959549
#SPJ1
Which of the following is a true statement about the conservation of energy?
According to the law of conservation of energy, statement which is true about conservation of energy is that the total energy is always conserved.
What is law of conservation of energy ?According to law of conservation of energy, it is evident that energy is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Julius Mayer in the year 1842.
Learn more about law of conservation of energy,here:
https://brainly.com/question/12050604
#SPJ1
need these answered with explanation please, i need this asap.
1. a. Frequency of the wave is equal to 2 cycles per second.
Wavelength of the wave is equal to 1.5 m.
2.a. The frequency of the wave is 3 cycles per second.
b, It is a longitudinal wave of wavelength is equal to 40 cm.
What is wave?An energy disturbance in a medium without net particle mobility is referred to as a wave. Among the probable manifestations are elastic deformation, pressure changes, variations in electric or magnetic intensity, electric potential, and temperature changes.
From picture 1.
1. a. frequency of the wave is = 2 cycles per second.
Wavelength of the wave is = 3 m/2 =1.5 m.
From picture 2.
2.a. As it moves forward and backward 3 times in very second, frequency of it is given by 3 cycles per second.
b, It is a longitudinal wave of wavelength is 40 cm.
Learn more about wave here:
https://brainly.com/question/3639648
#SPJ1
Shandra is studying Earth's magnetic field in her science class. She leams that a giant shield around her planet protects all living things from dangerous charged particles from the sun.
How does the magnetic field protect life on Earth?
O A. The magnetic field directs charged particles toward the poles and then past Earth.
O B. The magnetic field directs charged particles toward the equator and then past Earth.
O C. The magnetic field absorbs the charged particles coming from the sun.
O D. The magnetic field directs charged particles toward the poles then absorbs them.
The magnetic field protect life on Earth by directing the charged particles toward the poles and then past Earth.
The giant shield around Earth that protects all living things from dangerous charged particles from the sun is called as Earth's magnetosphere. It is generated by the motion of molten iron in Earth's core. It also provides the basis for navigation using a compass.
The magnetosphere shields the life on Earth from the constant bombardment by charged particles emitted from the sun which is called as solar wind.
Therefore, the magnetic field protects life on Earth by directing the charged particles toward the poles and then past Earth.
To know more about Earth's magnetosphere
https://brainly.com/question/10424668
#SPJ9
18. A man dived horizontally with a velocity of 1.5 ms from a 100 kg boat. If the recoil velocity of the boat is 0.9 ms what is the mass of the man?
166.6 kg is the mass of the man
initial momentum=final momentum
m1v1=m2v2
1.5×100=0.9×m2
m2=166.6 kg
Mass is used in physics to express inertia, a fundamental characteristic of all matter. Essentially, it is a mass of matter's resistance to changing its direction or speed in response to the application of a force. The change that an applied force produces is smaller the more mass a body has. The kilogram, the unit of mass in the International System of Units, corresponds to 6.62607015 1034 joule seconds using Planck's constant (SI). One joule is produced by multiplying one kilogram by one square meter per second. The kilogram is determined by exact measurements of Planck's constant since the second and the meter have previously been defined in terms of other physical constants.
To know more about mass visit : brainly.com/question/6782334
#SPJ9
A 1.0 kg block is pushed 3.0 m at a constant
velocity up a vertical wall by a constant force
applied at an angle of 28.0
◦ with the horizontal, as shown in the figure.
The acceleration of gravity is 9.81 m/s2
.If the coefficient of kinetic friction between
the block and the wall is 0.30, find
a) the work done by the force on the block.
Answer in units of J.
b) the work done by gravity on the block.
Answer in units of J.
c) the magnitude of the normal force between
the block and the wall.
Answer in units of N.
(a) The work done by the force on the block is 9.99 J.
(b) The work done by gravity on the block is 29.4 J.
(c) The magnitude of the normal force between the block and the wall is 9.8 N.
What is the work done by the applied force on the block?
The work done by the applied force on the block is calculated as follows;
W = Fd cosθ
where;
θ is the angle of inclination of the applied forced is the displacement of the blockF is the applied forceF - μmg = ma
since the block is moving as constant velocity, acceleration = 0
Fcosθ - μmg = 0
F = μmg/cosθ
W = μmgd/cosθ
W = 0.3 x 1 x 9.8 x 3 / cos(28)
W = 9.99 (J)
The work done by gravity on the block is calculated as follows;
W = mg d cosθ
where;
m is mass of the blockW = 1 x 9.8 x 3 x cos(0)
W = 29.4 J
The magnitude of the normal force between the block and the wall is calculated as;
Fn = mg
Fn = 1 x 9.8
Fn = 9.8 N
Learn more about normal force here: https://brainly.com/question/14486416
#SPJ1
A machine works with an efficiency of 20%. The energy input is 200 joules/second. How
much useful energy will the machine generate in 10 minutes?
A. 36 kJ
B. 24 kJ
C. 40 kJ
D. 600 kJ
The quantity of useful energy which this machine would generate in 10 minutes is equal to: B. 24 kJ.
How to determine the efficiency of a machine?Mathematically, energy efficiency can be calculated by using this formula:
Energy efficiency = WO/WI × 100
Where:
WO represents the output energy.WI represents the input energy.For the output energy, we have:
20 = WO/200 × 100
4000 = 100WO
Output energy, WO = 4000/100
Output energy, WO = 40 joules/second.
Note: A minute is equal to 60 seconds.
In 10 minutes, the time is given by:
10 minutes = 10 × 60
10 minutes = 600 seconds.
Now, we can determine the useful energy generated by this machine:
Useful energy = 40 joules/second × 60 seconds
Useful energy = 24,000 Joules or 24 Kilojoules (24 kJ).
Learn more about efficiency here: brainly.com/question/7672500
#SPJ1
look at the two models of charges
Answer: im looking
explination
An object is dropped from an unknown height. If it falls for 12.0s, how far
does it fall? (g = -9.81 m/s²)
O-706 m/s²
O -706 m/s
O -706 m
O-706 s
Question 7
4.1 pts
Answer:
706 m
Explanation:
Since distance is measured in meters (Standard Issued Units) the answer would be 706 m and not any other value.
What are the smaller bulbs called?
Answer:
E10 Miniature Edison Screw (MES) Also called “Miniature Screw
The smaller light bulbs are the E5 Lilliput Edison Screw (LES).
What are the common light bulb base sizes ?
Today, there are many applications that make substantial use of light bulbs. Lighting bulb bases come in a wide variety.
Based on the letter-number references, you can tell what size light bulb base it is. In contrast to the number, which designates the base's breadth, the first letter indicates the base's shape or form.
Following are the most typical diameters for light bulb bases:
Standard-Medium, normal sized screw in base: E26 or E27
Candelabra, a smaller screw in base: E12
Intermediate: E17
Bi-pin, having pin-in base including two points of contact: G4 or GU24
Twist-And-Lock base: GU10
To learn more about light bulbs from the given link
https://brainly.com/question/2740728
#SPJ4
What do we call the number of waves that pass by a given point in one
second?
OA. The wavelength
OB. The frequency
о C. The amplitude
о D. The period
I need assistance with these questions asap.
Answer:
Explanation:
9a) Velocity North
30 m/s * Sine(60) = 25.98076.. m/s
9b) Distance North
25.98076 m/s * (3 hour) but we need hours in seconds b/c that's our velocity units
25.98076 m/s * 10800 s = 280,592.23 m
9c) Velocity East
30 m/s * Cosine(60) = 15 m/s
9d) Distance East
15 m/s * (3 hours)
15 m/s * 10800 s = 162,000 m
9e) Total displacement ( total distance also known as magnitude)
Total Distance = [tex]\sqrt{(Distant North)^{2} + (Distant East)^{2} }[/tex]
TD = [tex]\sqrt{280592.23^{2} + 162000^{2} }[/tex]
TD = 323999.99 m
let's round it to 324,000 m
324 Km
Can an object have momentum in space?
Answer: Objects in space can have momentum space because momentum depends on mass and velocity. Unlike other quantities, like weight, mass does not change if an object is on space or on Earth.
Explanation: Because momentum depends on mass and velocity and unlike other quantities, like weight, mass does not change if an object is on space or on Earth.
1. A student tests the second law of motion by accelerating a block of ice at a rate of 3 m/s².
If the ice has a mass of 12.6 kg, what is the force must the student apply to the ice?
Answer: 37.8 N
Explanation:
F = ma (Newton's 2nd Law)
Force = mass x acceleration
F = (12.6 kg)(3 m/s2) = 37.8 N
Which type of energy does an object not have if it is not moving?
Answer:
Explanation:
A motionless object can have energy. The energy that the object has is called potential energy.
Energies it does not have may consist of kinetic energy, gravitational potential energy, elastic potential energy, and chemical potential energy
In a crash, when a head hits an airbag, what is observed when the head first touches the
airbag and when the head stops? (keywords: speed, time, force)
When a head collides with an airbag in a collision, the head's initial velocity and its final velocity are measured.
What is the definition of force?In economics, a power is defined as the pull or draw that modifies an object's velocity. Ingredients that might affect a person's sense of personal work or sleepiness are invisible to the human eye. Its dimensions and form are distinctive.
What does force mean in Example?In daily life, there are many instances of forces, including: weight and force (i.e. the weight of something) the pressure a bat puts on a ball. the amount of force used to brush hair using a brush. the force used by your foot to press the pedal.
Too know more about Force visit:
https://brainly.com/question/13191643
#SPJ1
A hamster doing push-ups has a mass of 1 kg and applies force to lift its body 5 cm to complete 0.50 joules of work. If the hamster does this work in 2 seconds, what is its power?
If the hamster does this work in 2 seconds, its power is equal to 0.25 Watt or Joule per second.
What is work done?The work done (W) by an object can be calculated by multiplying the force acting on it by the perpendicular distance covered by the physical object. This ultimately implies that, work done (W) and energy (E) have the same unit i.e Joules (J).
Mathematically, the work done (W) by an object can be calculated by using the following formulas:
Work done (W) = force × distance ..................equation 1.
Work done = power × time ..................equation 2.
Making power the subject of formula in equation 2, we have:
Power = (Work done)/time
Note: The time is measure in seconds.
Substituting the given parameters into the formula, we have;
Power = (0.50 Joules)/2
Power = 0.25 Watt or Joule per second.
Read more on work done here: brainly.com/question/25816840
#SPJ1
please respond my question
The astronomy of the star and the parameters of the star in terms of solar units are;
Radius of the star ≈ 5.03 [tex]R_{Sun}[/tex]
Temperature of the star ≈ 0.92 [tex]T_{Sun}[/tex]
Luminosity of the star ≈ 18 [tex]L_{sun}[/tex]
What is the system for astronomy units?The astronomical system of units are a special class of units designed for astronomy.
First part;
One solar radius is specified as [tex]R_{Sun}[/tex] = 6.9551 × 10⁵ km
The radius of the star = 3.50 × 10⁶ km
The radius of the star in units of the solar radius is therefore;
Radius = 3.50 × 10⁶ km ÷ (6.9551 × 10⁵ km) [tex]R_{Sun}[/tex] ≈ 5.03 [tex]R_{Sun}[/tex]Second part;
One unit of the solar temperature, [tex]T_{Sun}[/tex] = 5777 K
The temperature of the star = 5305 K
The stars temperature in units of the solar temperature, is therefore;
Temperature = 5305 K/(5777 K) ≈ 0.92
The temperature of the star in units of the solar temperature is 0.92 [tex]T_{Sun}[/tex]Third part;
The function for the luminosity of a star, L, is; L = 4·π·R²·σ·T⁴
The luminosity of the star = 4 × π × (3.50 × 10⁶)² × σ × 5305⁴
The luminosity of the Sun = 4 × π × (6.9551 × 10⁵)² × σ × 5777⁴
The solar luminosity of the star = (4 × π × (3.50 × 10⁶)² × σ × 5305⁴) ÷ (4 × π × (6.9551 × 10⁵)² × σ × 5777⁴) ≈ 18
The solar luminosity of the star is 18 [tex]L_{Sun}[/tex]Learn more about astronomy here:
https://brainly.com/question/12947180
#SPJ1
Circle the letter of the cell layer that produces new phloem and xylem.
A. heartwood
B. sapwood
C. bark
D. cambium
Answer:
D: Cambium
Explanation:
The Answer is cambium
Which quantities (initial horizontal speed, initial vertical speed, range, flight time, or maximum height) are proportional to the square of the initial velocity?
(This is about angled projectiles)
(Include an explanation please)
Range and Maximum height are proportional to the square of the initial velocity.
In projectile motion, Range of the particle is the horizontal distance travelled by the projectile between launch and the landing points and is denoted as R,
R = u^2sin2θ/g
Here u is initial velocity.
Maximum height is the maximum height from the point of projection, a projectile can reach.
And at maximum height (h) attained, velocity of the object is zero (v=0)
we can use , v^2 - (u sinθ)^2= 2ah (acceleration due to gravity is a= -g)
Or 0 - (u sinθ)^2 = 2(-g)h
⇒ h = u^2 sin^2 θ / 2g
To know more about projectile motion here
https://brainly.com/question/11261462
#SPJ1
URGENT!! ILL GIVE
BRAINLIEST!!!! AND 100 POINTS!!!!!
Answer:
The answer is C inertia
Explanation:
This action is a result of the disks.