Answer:
3×10⁵ N/m²
Explanation:
From the question given above, the following data were obtained:
Force (F) = 450 N
Area (A) = 0.0015 m²
Pressure (P) =?
Pressure is simply defined as the force per unit area. Mathematically, it is expressed as:
Pressure (P) = Force (F) / Area (A)
P = F/A
With the above formula, we can obtain the pressure exerted by the man on the ground. This can be obtained as follow:
Force (F) = 450 N
Area (A) = 0.0015 m²
Pressure (P) =?
P = F/A
P = 450 /0.0015
P = 3×10⁵ N/m²
Thus, the pressure exerted by the man on the ground is 3×10⁵ N/m².
I need the answer please
Answer:
the answer is the first one
Na+
A bag of gumdrops contains 17 orange gumdrops, 10 yellow gumdrops, and 18 black gumdrops.
What is the percent of yellow gumdrops?
Express your answer to two significant figures and include the appropriate units.
Answer:
Total number of gum drops = 10 + 17 +18
= 45
Explanation:
[tex] \frac{10}{45} \times 100 \\ = 22.222222\ \ \% \\ 22\% \: gum \: drops \: \\ to \: 2 \: sf[/tex]
propose a synthetic route for the synthesis of a named alkanal starting with ethyl formate and grignard reagent.
Answer:
See explanation and image attached
Explanation:
A Grignard reagent is an alkyl magnesium halide. If it reacts with ethyl formate, an intermediate is formed as shown.
This intermediate can undergo water hydrolysis to form a diol, ethanol and MgBrOH.
Oxidation of the diol obtained now yields the corresponding alkanal which in this case is ethanal.
The scheme of the reaction is shown in the image attached to this answer.
Which of the following would eat a dead rabbit?
Herbivore
Carnivore
Omnivore
Detritivore
Please help
Detritivore
Explanation:
they eat the dead things
Describe the three freezing points. Is there a relationship between the amount of solute in the solution and the freezing temperature
Answer:
The three freezing points will all be slightly different. It is given that a water solution has a freezing point of zero degrees Celsius, so water would have a freezing temperature below that. Salt will lower the freezing point, the more that is added.
Explanation:
The most intense line in the emission spectrum for sodium appears at a wavelength of 589 nm. What color would you expect to observe when a solution that contains sodium ions is heated strongly in the flame of a Bunsen burner
Answer:
The most intense line in the emission spectrum for sodium appears at a wavelength of 589 nm.
What color would you expect to observe when a solution that contains sodium ions is heated strongly in the flame of a Bunsen burner?
Explanation:
Put a clean wire loop in a solid sample of the compound containing sodium ions, then keep it on the blue flame of the Bunsen burner.
The color of sodium ions in the Bunsen burner shows charactrestic yellow color.
9. The formular for finding the area
of an object is
A. Length + Width
B. Length - Width
C. Length : Width
D. Length x Width
E. 2 (Length + Width)
ans
Answer:
D. length × width
Explanation:
eg. 30 cm(length) × 20cm(width) = 600cm²
True or false? An organism may play more than one role in a food web
Answer:
true
Explanation:
because an organism have many roles in food web
Scientist A produces 83.67 g KMnO4 while Scientist B produces 81.35 g KMnO4.
What is the percent yield for Scientist A?
What is the percent yield for Scientist B?
You must show all work to receive full credit.
The equation for the production of potassium permanganate is as follows:
2 MnO2 + 2 KOH + O2 → 2 KMnO4 + H2
Answer:
[tex]Y_A=92.1\%\\\\Y_B=89.6\%[/tex]
Explanation:
Hello there!
In this case, according to the given chemical equation for the reaction for the production of potassium permanganate, we can see a 2:2 mole ratio of this product to the starting manganese (II) oxide, which means, we can calculate the theoretical yield of the former via stoichiometry:
[tex]m_{KMnO_4}=50.0gMnO_2*\frac{1molMnO_2}{86.94gMnO_2}*\frac{2molKMnO_4}{2molMnO_2} *\frac{158.034gKMnO_4}{1molKMnO_4} \\\\m_{KMnO_4}=90.9gKMnO_4[/tex]
Now, we are able to compute the percent yields, by using the actual yield each scientist got:
[tex]Y_A=\frac{83.67g}{90.9g} *100\%=92.1\%\\\\Y_B=\frac{81.35g}{90.9g} *100\%=89.6\%[/tex]
Regards!
someone answer please
Answer:
A
Explanation:
3CaCl2 + 2AlF3 --> 3CaF2 + 2AlCl3 3CaCl2 + 2AlF3 --> 3CaF2 + 2AlCl3 How many grams of CaF2 will form from 36.5 grams of AlF3?
Answer:
32.1 g
Explanation:
3CaCl₂ + 2AlF₃ → 3CaF₂ + 2AlCl₃
First we convert 36.5 g of AlF₃ into moles, using its molar mass:
36.5 g ÷ 133.34 g/mol = 0.274 mol AlF₃
Then we convert 0.274 moles of AlF₃ into moles of CaF₂, using the stoichiometric coefficients of the reaction:
0.274 mol AlF₃ * [tex]\frac{3molCaF_2}{2molAlF_3}[/tex] = 0.411 mol CaF₂
Finally we convert 0.411 moles of CaF₂ into grams, using its molar mass:
0.411 mol * 78.07 g/mol = 32.1 g
What is the mass in grams of 0.700 moles of water, H2O
Answer:
12.6
Explanation:
[tex]no \: of \: mole= \frac{mass}{molar \: mass} [/tex]
0.7=mass/(2+16)
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 12.6g is the mass in grams of 0.700 moles of water.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. The stoichiometry represents the number of moles.
Mathematically,
number of moles of water=given mass of water÷ molar mass of water
Molar mass of 1 mole of water= 18 g/mol
mass of water= ?
0.700 moles=moles of water
Substituting all the given values in the above equation, we get
0.700 moles=mass of water ÷ 18 g/mol
mass of water =12.6g
Therefore, 12.6g is the mass in grams of 0.700 moles of water.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
The combination of isotopes of hydrogen characterized by emmision of radiation is believed to take place in the
a. sun
b. galaxy
c. moon
d. star
Cyclopropane is more reactive than most cycloalkanes. What factors lead to cyclopropane being less stable than the other cycloalkanes
Answer: The factor that lead to cyclopropane being less stable than the other cycloalkanes is the presence of a RING STRAIN.
Explanation:
In organic chemistry, the end carbon atoms of an open aliphatic chain can join together to form a closed system or ring to form cycloalkanes. Such compounds are known as cyclic compounds. Examples include cyclopropane, cyclobutane, cyclopentane and many among others.
Cyclopropane is less stable than other cycloalkanes mentioned above because of the presence of ring strain in its structural arrangement. The ring strain is the spatial orientation of atoms of the cycloalkane compounds which tend to give off a very high and non favourable energy. The release of heat energy which is stored in the bonds and molecules cause the ring to be UNSTABLE and REACTIVE.
The presence of the ring strain affects mainly the structures and the conformational function of the smaller cycloalkanes. cyclopropane, which is the smallest cycloalkane than the rest mentioned above, contains only 3 carbons with a small ring.
what is the importance of energy in humans
Explanation:
Energy is essential to life and all living organisms. The sun, directly or indirectly, is the source of all the energy available on Earth. Our energy choices and decisions impact Earth's natural systems in ways we may not be aware of, so it is essential that we choose our energy sources carefully
how to calculate moles
Explanation:
First you must calculate the number of moles in this solution, by rearranging the equation. No. Moles (mol) = Molarity (M) x Volume (L) = 0.5 x 2. = 1 mol.
For NaCl, the molar mass is 58.44 g/mol. Now we can use the rearranged equation. Mass (g) = No. Moles (mol) x Molar Mass (g/mol) = 1 x 58.44. = 58.44 g.
Answer:
Number of moles : Mass (g) ÷ relative atomic mass
What will be the pH change when 20.0 mL of 0.100 M NaOH is added to 80.0 mL of a buffer solution consisting of 0.163 M NH3 and 0.188 M NH4Cl
Answer:
[tex]pH=9.32[/tex]
Explanation:
Hello there!
In this case, according to the given scenario, it turns out necessary for us to realize that the addition of NaOH consumes the conjugate base, NH4Cl, and produces more base, NH3; that is why the reaction taking place is:
[tex]NH_4^++OH^-\rightarrow NH_3+H_2O[/tex]
Thus, the reacting moles of ammonium and hydroxide ions are:
[tex]n_{NH_4^+}=0.0800L*0.188mol/L=0.01504mol\\\\n_{OH^-}=0.0200L*0.100mol/L=0.00200mol[/tex]
Thus, the resulting moles of ammonium and ammonia are respectively:
[tex]n_{NH_4^+}=0.01504mol-0.00200mol=0.01304mol\\\\n_{OH^-}=0.0800L*0.163mol/L+0.00200mol=0.01504mol[/tex]
Then, by using the Henderson-Hasselbach equation and recalling the pKb of ammonia (4.74), we first calculate the pOH as follows:
[tex]pOH=pKb+log(\frac{n_{NH_4^+}}{n_{NH_3}} )\\\\pOH=4.74+log(\frac{0.01304mol}{0.01504mol} )\\\\pOH=4.68[/tex]
And finally the pH:
[tex]pH=14-4.68\\\\pH=9.32[/tex]
Regards!
How do I balance this?
_CuC12 + _NaNO3 → _CU(NO3)2 + _ NaC1
[tex]CuCl_2+2NaNO_3 \rightarrow Cu(NO_3)_2 + 2NaCl[/tex]
If the H3O is 4.950 x 10-12 what is the ph?
Answer:
pH = 11.3
Explanation:
From the question given above, the following data were obtained:
Concentration of hydronium ion [H₃O⁺] = 4.950×10¯¹² M
pH =.?
The pH of a solution is defined by the following equation:
pH = –Log [H₃O⁺]
Thus, with the above formula, we can obtain the pH of the solution as follow:
Concentration of hydronium ion [H₃O⁺] = 4.950×10¯¹² M
pH =.?
pH = –Log [H₃O⁺]
pH = –Log 4.950×10¯¹²
pH = 11.3
It is important for scientists to know how much energy is given off or absorbed in a chemical reaction. Which options below would indicate an exothermic reaction?
delta H = –
delta H = +
Energy is considered a reactant in the reaction: A + B + energy ---> C + D
Energy is considered a product in the reaction: A + B ---> C + D + energy
Energy is released in the reaction.
Energy is absorbed in the reaction.
For exothermic reactions, ΔH is always negative, energy is considered a product, and energy is released in the reaction.
An exothermic reaction is one in which energy, usually in the form of heat, is released to the environment from the reaction. In other words, the final temperature of an exothermic reaction would always be more than the initial temperature.
This also means that heat energy is a product of exothermic reactions and this heat is released to the environment from the reaction.
More on exothermic reactions can be found here: https://brainly.com/question/10373907?referrer=searchResults
Answer:
a, d, and e is correct on edge of the nuity
Explanation:
have a good day
54.56 g of water at 80.4 oC is added to a calorimeter that contains 47.24 g of water at 40 oC. If the final temperature of the system is 59.4 oC, what is the calorimeter constant (C calorimeter)
Answer:
49.5J/°C
Explanation:
The hot water lost some energy that is gained for cold water and the calorimeter.
The equation is:
Q(Hot water) = Q(Cold water) + Q(Calorimeter)
Where:
Q(Hot water) = S*m*ΔT = 4.184J/g°C*54.56g*(80.4°C-59.4°C) = 4794J
Q(Cold water) = S*m*ΔT = 4.184J/g°C*47.24g*(59.4°C-40°C) = 3834J
That means the heat gained by the calorimeter is
Q(Calorimeter) = 4794J - 3834J = 960J
The calorimeter constant is the heat gained per °C. The change in temperature of the calorimeter is:
59.4°C-40°C = 19.4°C
And calorimeter constant is:
960J/19.4°C =
49.5J/°C
Identify whether longhand notation or noble-gas notation was used in each case below.
Answer:
The given electronic configuration is long hand notation.
Explanation:
Long-hand notation of representing electronic configuration is defined as the arrangement of total number of electrons that are present in an element.
Noble-gas notation of representing electronic configuration is defined as the arrangement of valence electrons in the element. The core electrons are represented as the previous noble gas of the element that is considered.
The given electronic configuration of potassium (K):
The above configuration has all the electrons that are contained in the nucleus of an element. Thus, this configuration is a long-hand notation.
"A space shuttle travels around the Earth at a constant speed of 28000 kilometers per hour. If it takes 90 minutes to complete one orbit, how far is its journey around Earth?
"
Answer:
42000km
Explanation:
Average Speed (v) can be calculated using the formula as follows:
Average speed = distance (d) ÷ time (t)
According to this question, a space shuttle travels around the Earth at a constant speed of 28000 km/hr in 90 minutes.
Since 60 minutes = 1 hr
90 minutes = 90/60
= 3/2 or 1.5hours.
Using speed = distance/time
Distance (km) = speed × time
Distance = 28000 km/hr × 1.5hr
Distance = 42000km
which of the following illustrates a reversible change a cooking corn be rusting c frying egg and the boiling water
is Decanitrogen tetroxide Ionic or Molecular
Answer:
Decanitrogen is molecular
Explanation:
Answer:
Dec a nitrogen is Molecular
Explanation:
hey mate i hope it will help you...!
Methanol and butanol are alcohols. Alcohols have the same_______________ as alkanes and the __________ identifies the compound as an alcohol.
Answer:
Methanol and butanol are alcohols. Alcohols have the same_______________ as alkanes and the __________ identifies the compound as an alcohol.
Explanation:
Alcohols belong to a group of organic compounds which contain -OH group as the functional group.
So alcohols have the same carbon -hydrogen bonds as alkanes and the -OH functional group identifies the compound as an alcohol.
A mixture of sulfuric acid and nitric acid will produce small quantities of the nitronium ion (NO2 ): The nitronium ion has a central nitrogen atom with a positive charge double bonded to two oxygen atoms on both sides. Each oxygen atom carries two lone pairs of electrons. Does the nitronium ion have any significant resonance structures
Answer:
A mixture of sulfuric acid and nitric acid will produce small quantities of the nitronium ion (NO2 ): The nitronium ion has a central nitrogen atom with a positive charge double bonded to two oxygen atoms on both sides. Each oxygen atom carries two lone pairs of electrons. Does the nitronium ion have any significant resonance structures?
Explanation:
The structure of nitronium ion is shown below:
Any molecule to exhibit resonance, it should have alternating double bonds.
Resonance is the phenomenon in which the structure of a molecule can be represented in two or more forms and each form is called canonical form.
The canonical forms do not differ in the position of atoms and they differ only in the position of double bonds.
For the given molecule, there are no alternating double bonds.
Hence, nitronium ion does not exhibit any significant resonance structures.
what is the molality of a solution that has 4 mol of KCI in 0.800 kg of water?
help me pleaseeee
The molality of a solution that has 4 mol of KCI in 0.800 kg of water is 4 mol/ 0.800 kg.
Therefore option B is correct.
What is molality?b is described as a measure of the number of moles of solute in a solution corresponding to 1 kg or 1000 g of solvent.
In order to calculate molality, we need to divide the number of moles of solute by the mass of the solvent in kilograms.
Molality = Number of moles of solute / Mass of solvent in kilograms
Molality = 4 mol / 0.800 kg
In conclusion, the molality is described as a measure of the concentration of a solution expressed in terms of the number of moles of solute per kilogram of solvent.
Learn more about Molality at:
https://brainly.com/question/1370684
#SPJ1
explain how the solid liquid line in the phase diagram of water differs in character from the solid liquid line in the phase diagrams of most other substances such as CO2
Answer:
The solid-liquid line in the water phase diagram has a negative slope, whereas for most other substances it has a positive slope.
The ice has a lower density as compared to water still they have in the solid phase.
Reason how the solid-liquid line in the phase diagram as compared to other:In the solid-liquid line in the water phase diagram it contains the negative slope. While the most other substance should have the positive slope.
Also, when the pressure is applied so the higher density should be favored. In the water, the highest density phase should be likely the liquid water.
Learn more about liquid here: https://brainly.com/question/17109464
What property can be easily measured in solids, liquids, and gases? (2 points)
Group of answer choices
The temperature of solids, liquids, and gases can be easily measured.
The texture of solids, liquids, and gases can be easily measured.
The color of solids, liquids, and gases can be easily observed.
The texture and temperature can be easily measured for solids, liquids, and gases.
Answer:
I think the answer is A
Explanation:
the temperature of solids , liquids and gases can be easily measured