Answer:
electron pair geometry - octahedral
molecular geometry - square pyramidal
bond angle - < 90 degrees
Explanation:
According to Valence Shell Electron Pair Repulsion Theory (VSEPR), The shapes of molecules depend on the number of electron pairs on the outermost shell of the central atom in the molecule. Recall that electron pairs are always positioned as far apart in space as possible to minimize repulsion.
For a molecule in sp3d2 hybridization, the expected electron domain geometry is octahedral. However, the presence of a lone pair in the molecule distorts the electron pair geometry away from the expected octahedral shape giving a molecular geometry of square pyramidal and decreases the bond angle less than the expected 90 degrees.
Why are the sublevels within a principal level split into different energies for multi-electron atoms but not for hydrogen atom?
Answer:
Kindly check the explanation section.
Explanation:
Hydrogen in the periodic chart/table is the first element on the periodic table with binding energy of 0.000± 0.0000 keV, Isotopic mass of 1.007825 u, one or single proton and a spin value of half(1/2).
The first thing to note for the fact that hydrogen's sublevels within a principal level does not split into seperate or different energies is that THERE IS A VACANT GROUND STATE IN HYDROGEN ATOM. With this, it makes it impossible for the electrons that are inside to get infiltrated which is the case with the atoms with multielectron.
NB: Penetration is done by electrons outside.
A crow flies 100 meters east in 5 minutes. What is the crow’s velocity?
Answer: 20 m/min east
Explanation: The speed is distance divided by time
distance between start-point and end-point = 100 meters
time to cover the distance = 5 minutes
100 m ÷ 5 min = 20 m/min east
you have to add east since velocity is the measure of speed and direction and your answer needs to include the direction
which has a higher melting point CH3CH2CH2CH2CH2CH3 or CH3CH2CH2CH2CH2CH2CH2CH3
Answer:
the second one
Explanation:because its higher
Answer:
CH3CH2CH2Ch2Ch2Ch3
Explanation:
That's the answer
Which of the following examples of erosion would occur most quickly?
OA. A river erodes sediment to form a canyon.
ОВ.
A glacier carves out a path as it moves.
OC. A wind storm moves sand from one area to another
OD
Ocean waves erode a large rocky cliff.
Answer: OC
Explanation:
The Others Could Take Many Millions Of Years
The barometric pressure measured outside an airplane at 3 km ( ft) was 524 mmHg. Calculate the pressure in kPa.
Answer:
69.8609 KPa.
Explanation:
The following data were obtained from the question:
Pressure (in mmHg) = 524 mmHg.
Pressure (in KPa) =?
Thus we can obtain the pressure in KPa as follow:
760 mmHg = 101.325 Kpa
Therefore,
524 mmHg = 524 mmHg × 101.325 KPa / 760 mmHg
524 mmHg = 69.8609 KPa
Thus, 524 mmHg is equivalent to 69.8609 KPa.
If the concentration of a reactant is tripled (all other things remain constant), and the reaction rate increases nine times, what is the reaction order with respect to the tripled reactant? Enter your answer as a number.If the concentration of a reactant is increased 1.5 times (all other things remain constant), and the reaction rate increases 2.25 times, what is the reaction order with respect to the reactant? Enter your answer as a number.If the concentration of a reactant is tripled (all other things remain constant), and the reaction rate remains constant, what is the reaction order with respect to the tripled reactant? Enter your answer as a number.When 29.0 mL of 0.220 M KIO3 is combined with 38.0 mL of H2SO3 and 50.0 mL of water, what is the resulting concentration of KIO3?
The reaction order for the following conditions are:
a. two
b. two
What do you mean by reaction order?Reaction order is the number of reactants, whose concentration affects the reaction rate.
The reaction order can be determined by adding the exponents of each reactant.
The rate equation is [tex]v^0 = k[A]^x + k[B]^y[/tex]
The first-order reaction is in which the reaction is dependent on one variable concentration.
The second-order reaction is that in which the reaction is dependent upon the concentration of two variables.
Thus, the correct options are a. two, b.two.
Learn more about reaction order
https://brainly.com/question/1769080
how many sodium ions are in 1.4 kg of sodium chloride, NaCl?
Answer:
1.44 x 10²⁵ ions of Na⁺
Explanation:
Given parameters:
Mass of NaCl = 1.4kg = 1400g
Unknown:
Number of ions of sodium = ?
Solution:
The compound NaCl in ionic form can be written as;
NaCl → Na⁺ + Cl⁻
In 1 mole of NaCl we have 1 mole of sodium ions
Now, let us find the number of moles in NaCl;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
Number of moles = [tex]\frac{1400}{58.5}[/tex] = 23.93mol
So;
Since 1 mole of NaCl gives 1 mole of Na⁺
In 23.93 mole of NaCl will give 23.93 mole of Na⁺
1 mole of a substance = 6.02 x 10²³ ions of a substance
23.93 mole of a substance = 6.02 x 10²³ x 23.93
= 1.44 x 10²⁵ ions of Na⁺
Calcium sulfide has a face-centered cubic unit cell with calcium ions in octahedral holes and sulfide ions at the lattice points. How many ions of each element are contained in each unit cell
Answer:
4 calcium ions and 4 sulfide ions.
Explanation:
In a face centered unit cell, 8 corners of the unit cell are occupied by 8 atoms. Each corner is 1/8 of a cell. In addition it has 6 atoms in the face of the lattice, which is 1/2 of a cell. (1/8 * 8) + (1/2 * 6) = 4. CaS has a 1:1 ratio. Therefore, they each have 4 ions.
Each cubic unit cell contains FOUR (4) calcium ions in octahedral holes and FOUR (4) sulfide ions at the lattice points.
Calcium sulfide is a solid inorganic compound (chemical formula: CaS) that shows a white appearance and crystallizes in cubes like rock salts. This molecule (calcium sulfide) is widely used to produce certain classes of paints, ceramics, paper, etc.Calcium has a valence of 2 electrons, while sulfur has '6' valence electrons, thereby the number of valence electrons in CaS is equal to 2 + 6 = 8.Calcium sulfide (CaS) adopts a sodium chloride crystal structure where each CaS unit cell contains four sulfide (S²⁻) ions and four calcium (Ca²⁻) ions.In conclusion, each cubic unit cell contains FOUR (4) calcium ions in octahedral holes and FOUR (4) sulfide ions at the lattice points.
Learn more in:
https://brainly.com/question/5248441
List any three quantum numbers that describe an electron in an atom and state the relationship between any of the two
Explanation:
To completely describe an electron in an atom, four quantum numbers are needed: energy (n), angular momentum (ℓ), magnetic moment (mℓ), and spin (ms).
Please follow me and make me Brainless
How to make the solar oven using the following materials
-pizza box
-aluminium foil
-mirror
-hot glue
-chopstick
Answer:
hot glue
Explanation:
nxjfjndkskkskdkdjjfkdkkdjfkod
A calorie is a unit of measurement that measures what?
Answer:
Okay
Explanation:
Cells pump definition
Answer:
Pumps also called transporters, are transmembrane proteins that actively move ions and/or solutes against a concentration or electrochemical gradient across biological membranes.
Heavier compounds tend to have higher boiling points. However, sulphur dichloride (Mr= 103.1 gmol-1) and sulphur hexafluoride (Mr = 146.1 g mol-1) have the boiling point of 59 °C and -50.8 °C respectively. Explain this phenomenon.
What are the different layers of the earth and how do they interact.
Answer: The crust and the upper layer of the mantle together make up a zone of rigid, brittle rock called the Lithosphere . The layer below the rigid lithosphere is a zone of asphalt-like consistancy called the Asthenosphere . The asthenosphere is the part of the mantle that flows and moves the plates of the Earth.
Explanation:
Determine the molarity of a solution prepared by dissolving 0.198 g of "KHP" (C8H5O4K) in enough water to make 125 mL of solution.
When the solution is found and titrated with aqueous sodium hydroxide, the endpoint is reached after the addition of 27.80 mL of base solution. How many moles of NaOH reacted? What is the concentration of the NaOH?
Answer:
0.007756M KHP; 0.0009695 moles NaOH reacts; 0.03488M NaOH.
Explanation:
Potassium hydrogen phthalate, KHP, is a salt used as standard to determine concentration of basic solutions as NaOH solutions.
To find molarity of the KHP solution we need to convert mass of KHP to moles and divide this in 125mL = 0.125L:
Moles KHP -Molar mass: 204.22g/mol-:
0.198g * (1mol / 204.22g) = 0.0009695 moles KHP
Molarity:
0.0009695 moles KHP / 0.125L = 0.007756M KHP
NaOH reacts with KHP as follows:
NaOH + KHP → Na⁺ + KP⁻ + H₂O
That means 1 mole of NaOH reacts per mole of KHP, that means moles of NaOH that reacts are = Moles of KHP added:
0.0009695 moles NaOH reacts
In 27.80mL = 0.02780L the NaOH was contained. Molarity is:
0.0009695 moles NaOH / 0.02780L =
0.03488M NaOH
Moles of NaOH added will be "0.034".
According to the question,
→ [tex]Molarity = \frac{Number \ of \ moles}{Volume}[/tex]
By substituting the values, we get
[tex]= \frac{0.198}{204}\times \frac{1000}{125}[/tex]
[tex]= 0.0077 \ M[/tex]
Let,
The number of moles added be "[tex]M_2[/tex]".Now,
→ [tex]M_1 V_1 = M_2 V_2[/tex]
→ [tex]0.0077\times 125=M_2\times 27.8[/tex]
→ [tex]M_2 = 0.034 \ moles[/tex]
Thus the above answer is appropriate.
Learn more:
https://brainly.com/question/23931328
Consider the following reaction:2 HgCl2(aq) + C2O42-(aq) 2 Cl-(aq) + 2 CO2(g) + Hg2Cl2(s)(a) The rate law for this reaction is first order in HgCl2(aq) and second order in C2O42-(aq). What is the rate law for this reaction?Rate = k [HgCl2(aq)] [C2O42-(aq)]Rate = k [HgCl2(aq)]2 [C2O42-(aq)]Rate = k [HgCl2(aq)] [C2O42-(aq)]2Rate = k [HgCl2(aq)]2 [C2O42-(aq)]2Rate = k [HgCl2(aq)] [C2O42-(aq)]3Rate = k [HgCl2(aq)]4 [C2O42-(aq)](b) If the rate constant for this reaction at a certain temperature is 0.0169, what is the reaction rate when [HgCl2(aq)] = 0.158 M and [C2O42-(aq)] = 0.202 M?Rate = M/s.(c) What is the reaction rate when the concentration of HgCl2(aq) is doubled, to 0.316 M while the concentration of C2O42-(aq) is 0.202 M?Rate = M/s
Answer:
b
Explanation:
is metal and plastic beads magnetism, state of matter, or solubility?
please help!!!!
Phrase to describe ice
Answer:
Here are some adjectives for ice: para-elemental, kinder thin, thick continental, invisibly transparent, dirty, rock-hard, immense and almost innumerable, thin, flawless, horizontal and pelting, nearly horizontal and pelting, more pelting, beautifully numbing, pure compact, new catastrophic, dirty brash, largely foamy, ...
Explanation:
The pressure of a 5.0 L sample of gas changes from 3.0 atm to 10.0 atm while the temperature remains constant. What is the gas’s new volume?
Answer:
The answer is 1.5 LExplanation:
The new volume can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we are finding the new volume
[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]
From the question we have
[tex]V_2 = \frac{5 \times 3}{10} = \frac{15}{10} = \frac{3}{5} \\ [/tex]
We have the final answer as
1.5 LHope this helps you
How many atoms of phosphorus are in 5.70 mol of copper(II) phosphate?
Answer:
Cu3 (PO4)2 contains a total of 2 atoms of phosphorus in just one molecule. (2.10 mol)(6.02214 x 10^23 atoms / mol)(2 phosphorous) = 2.53 x 10^24 atoms of phosphorous per molecule of copper i
Explanation:
find the percent yield,if 6.0g of Lithium chloride are actually produced and the theoretical yield is 35.4g of Lithium chloride.
Answer:
Percent yield = 17%
Explanation:
Given data:
Actual yield of lithium chloride = 6.0 g
Theoretical yield of lithium chloride = 35.4 g
Percent yield = ?
Solution:
Formula:
Percent yield = (actual yield / theoretical yield )× 100
Now we will put the values in formula.
Percent yield = (6.0 g/ 35.4 g)× 100
Percent yield = 0.17 × 100
Percent yield = 17%
Which of these types of changes is a physical change?
A. Changing one substance into another
B. Dissolving one substance in another
C. Breaking apart one substance into two substances
D. Making a new substance
Answer:
answer is c
Explanation: cause there breaking it
Why do scientists' study and synthesize new transuranium elements in the laboratory?
Explanation:
Nuclear structure and stability
Although the decay properties of the transuranium elements are important with regard to the potential application of the elements, these elements have been studied largely to develop a fundamental understanding of nuclear reactions and nuclear and atomic structure.
What mass of glucose (C6H12O6) should be dissolved in 12.0 kg of water to obtain a solution with a freezing point of -5.8 ∘C?
Solution properties are the properties of a solution that don't depend on the type of solute but only on the concentration of the solute.
Solutions from volatile substances have a higher boiling point and lower freezing points than the solvent
For freezing point can be formulated
[tex]\tt \Delta T_f=K_f.m[/tex]
K = molal freezing point constant
m = molal solution
A solution with a freezing point of -5.8 ∘C
[tex]\tt \Delta T_f=T_f~solvent-T_f~solution=0-(-5.8)=5.8[/tex]
[tex]\tt mass~of~glucose:\\\\\Delta T_f=K_f.m\\\\5.8=1.86^oC/m.\times \dfrac{mol~glucose}{12}\\\\mol~glucose=\dfrac{5.8\times 12}{1.86}=37.42[/tex]
[tex]\tt mass=mol\times MW=37.42\times 180=6735.6~g=6.7356~kg[/tex]
Draw the structures of the starting materials needed to make 2‑methylhept‑3‑yne or 2‑methyl‑3‑heptyne. The starting materials may be any bromoalkane having five carbons or fewer.
Answer:
Explanation:
The structures of the starting materials 2‑methylhept‑3‑yne can be seen in the diagram attached below. We will also notice the role of NaNH₂ which acts as a strong base and whose function is to extract acidic proton and form an alkyne as a product.
The reaction with NaNH₂ yields acetylide ion which is then reacted with a straight-chain alkyl halide to form an extended carbon chain.
CHECK THE DIAGRAM BELOW.
The diagram shows water in a graduated cylinders. Graduated cylinder B has 30 mL of water.
What is this statement and example of?
(4 Points)
Prediction
A theory
An observation
A hypothesis
Luca made the following chart for Earth’s four basic movements. What needs to be correct on his chart
Answer:
The solar system speed and Milky Way speed should be switched
Explanation:
Answer:
Explanation:
The solar system speed and Milky Way speed should be switched
Where are each located? How does each contribute to the formation of the atom (think balance)?
Answer:
Where are what located no picks no pdf so what?
Write a balanced half-reaction describing the oxidation of aqueous iodide anions to gaseous diiodine.
Answer:
I might be a little late but in case anyone in the future needs it the answer is 2I^-(aq) ---> I_2(g)+2e^-
The balanced half reaction describing the oxidation of aqueous iodide anions to gaseous diiodine is;
2I-(aq). ==>. I2(g) + 2e-Definition:
Oxidation as determined by oxidation Numbers simply refers to an increase in oxidation number.
In essence, the chemical reaction above involves the increase in oxidation number of Iodine, I from -1 to 0.
The half reaction is thus so, because gaseous diiodide is a diatomic element.
Read more:
https://brainly.com/question/4222605
How much water must be added to 424 mL of 0.189 M HCl to produce a 0.140 M solution?
Answer:
Volume of water added = 148.4 mL
Explanation:
Given data:
Initial volume = 424 mL
Initial molarity = 0.189 M
Final molarity = 0.140 M
Volume of water added = ?
Solution:
Formula:
M₁V₁ = M₂V₂
0.189 M×424 mL = 0.140 M×V₂
V₂ = 0.189 M×424 mL /0.140 M
V₂ = 80.136 M.mL / 0.140 M
V₂ = 572.4 mL
Final volume of solution is 572.4 mL.
Volume of water added = Final volume - initial volume
Volume of water added = 572.4 mL - 424 mL
Volume of water added = 148.4 mL