Answer:
The ideal gas law is a formula that relates the pressure, volume, temperature, and number of moles of a gas. It can be expressed as:
PV = nRT
where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the gas constant, and T is the temperature in Kelvin.
Since the number of moles and the temperature are constant in this problem, we can rearrange the formula to solve for the pressure:
P = (nRT) / V
Plugging in the known values, we get:
P = (nRT) / V
= (n * R * (35 + 273)) / 0.25 L
= (n * R * 308 K) / 0.25 L
We are given that the pressure is 500 mmHg and the volume is 0.25 L at this pressure, so we can set these equal:
500 mmHg = (n * R * 308 K) / 0.25 L
Solving for n, we get:
n = (500 mmHg * 0.25 L) / (R * 308 K)
We know that the pressure and volume of the gas at its original state are what we are trying to solve for. Let's call the original pressure P_0 and the original volume V_0. We can then express the relationship between the original and final state of the gas as:
P_0 * V_0 = n * R * T
Substituting the expression we found for n and the known values, we get:
P_0 * V_0 = ((500 mmHg * 0.25 L) / (R * 308 K)) * R * 308 K
Solving for P_0, we get:
P_0 = (500 mmHg * 0.25 L) / (R * 308 K) * (R * 308 K) / V_0
= (500 mmHg * 0.25 L) / (V_0)
Since V_0 = 0.5 L, we can substitute this value to get:
P_0 = (500 mmHg * 0.25 L) / (0.5 L)
= 500 mmHg / 2
= 250 mmHg
Therefore, the original pressure of the gas was 250 mmHg.
A fluid flowing in a pipe has 1.05 in diameter. If the fluid has density, viscosity and
volumetric flow rate are 62.3 , 1.2 cP and 35 gpm respectively. Calculate: 3
a) The velocity.
b) Reynolds number ()
[2]- Find the following
a) Drive an expression to find a pressure of methane gas at point B b) If the temperature of methane is 100 F, Calculate pressure of
methane gas at point B.
c) Calculate pressure of oil at point C.
PA = 1, 000 psig
[3]- If the water is pumped down one well and the displaced oil which flows up through well exit (see the fig below), drive an expression to find a pressure of inlet water Pw needed to displace oil when the water/oil interfacial tension σ is applied.
Velocity is a vector quantity that describes the rate and direction of an object's motion.
a) The velocity of the fluid:
V = 35 gpm / (π * (1.05 in)^2 / 4) = 7.09 ft/s
b) Reynolds number:
Re = (62.3 lbm/ft^3 * 7.09 ft/s * 1.05 in) / (1.2 cP) = 4,211.9
[2]- a) Expression to find pressure of methane gas at point B:
PB = PA + rgh
b) Pressure of methane gas at point B:
PB = 1,000 psig + (0.072 lbm/ft^3 * 32.2 ft * 0.0689 psia/ft) = 1,233.5 psig
c) Pressure of oil at point C:
PC = PB - 0.433 psia/ft * 32.2 ft = 1,093.3 psig
[3]- Expression to find pressure of inlet water Pw needed to displace oil:
Pw = PC + (σ / r) * (h2 - h1)
Pw = 1,093.3 psig + (σ / 0.072 lbm/ft^3) * (32.2 ft - 0 ft) = 1,093.3 psig + (σ / 0.072 lbm/ft^3) * 32.2 ft.
What is velocity?
Velocity is a vector quantity that describes the rate and direction of an object's motion. It is commonly represented by the symbol 'v' and is measured in meters per second (m/s). Velocity includes both the speed and the direction of the object. For example, if an object is moving north at 10 m/s, its velocity would be 10 m/s north. Velocity can also be determined by taking the derivative of the position function with respect to time.
To know more about velocity,
https://brainly.com/question/80295?source=archive
#SPJ1
Which of these is an example of a physical property?
A. Potassium ignites when placed in water.
B. Iron melts at 1,535 °C.
C. Hydrogen combines with oxygen to form water.
D. Chlorine oxidizes bacterial cells.
Answer: B is correct.
Explanation:
Answer A is a chemical change because of intense changes of color and expansion.
Answer C is a chemical change, as hydrogen and water are chemically bonding together.
Answer D is a chemical change because oxidation involves loss of electrons during a chemical reaction.
On the other hand, melting is a physical change. Therefore, answer B is the correct answer.
What would be the cathode in a magnesium and zinc galvanic cell?
O A. Mg2+
OB. Zn(s)
OC. Zn²+
OD. Mg(s)
The correct answer is C. Zn²+. In a magnesium and zinc galvanic cell, the anode is the magnesium (Mg(s)) and the cathode is the zinc (Zn²+).
What is zinc galvanic cell?A zinc galvanic cell is an electrochemical device that uses a zinc anode and a cathode of a different material, usually copper, to produce electricity. The reaction that occurs in the cell is a redox reaction, which involves the oxidation of zinc at the anode and the reduction of copper at the cathode.
Zn²+. In a magnesium and zinc galvanic cell, the anode is the magnesium (Mg(s)) and the cathode is the zinc (Zn²+). In this cell, the magnesium metal is oxidized to form Mg2+ ions which are released into the solution. The zinc ions (Zn²+) are then reduced to zinc metal (Zn(s)) at the cathode.
To learn more about zinc galvanic cell
https://brainly.com/question/14290667
#SPJ1
Answer: B
Explanation:
an empty 5L, solid steel scuba tank containing 2 ¨bobs" of particles has a pressure of 765 mmHg then it is completely filled to 32 ¨bobs" of gas what is the pressure and volume of the filled tank
The new volume of the system can be found to be 4.9 L.
What is the new volume?We have to know that we do use the Boyle's law when we are trying to get the association that we know that does exist when we are looking at the volume and the pressure of the gas and the both can be shown to be inversely proportional.
We then have that;
Initial pressure(P1) = 765 mmHg
Initial volume (V1) = 5 L
Final pressure (P2)= 780 mmHg
Final volume (V2) = ?
Then;
P1V1 = P2V2
V2 = 765 * 5/780
V2 = 4.9 L
As such, we can see from the calculation that the new volume that we would obtain is 4.9 L
Learn more about Boyle's law:https://brainly.com/question/1437490
#SPJ1
Which statement is true about the potential energy diagram for an endothermic reaction? (5 points)
The potential energy of the products is equal to the potential energy of the reactants.
It starts at a higher energy value and ends at a lower energy value.
The energy value remains the same throughout the diagram.
Products have more potential energy than reactants.
Answer:
Products have more potential energy than reactants.
As shown in the image.
Which fuels are non-renewable
Answer:
fossil fuels
Explanation:
Well I had some topics on this stuff last quarter in science and from what I can remember it should be fossil fuels I think that fossil fuels are technically renewable but they are considered non-renewable since they are either in small supplies, are hard to obtain or take a long time to form.
Help me please please i is in middle school need help ple
the answer is that it is a
Antigens are substances that may induce immune response as they are recognised and bound by antibodies or cells of the immune system.
Based on your knowledge of the structures of bacteria and viruses, can you suggest some examples of molecules that are antigenic?
Some examples of molecules that are antigenic may be proteins and or polysaccharides in the cell wall of pathogenic bacteria which may be targeted by the immune system during the production of antibodies.
What is the relationship between antigens in pathogenic bacteria and antibodies of the immune system?The relationship between antigens in pathogenic bacteria and antibodies of the immune system is based on the fact that antigens are biomolecules in the pathogens that can be targeted to bond antibodies that are produced by the organism in immune responses against bacteria, viruses, and allergens in the air and foods, etc.
Therefore, with this data, we can see that antigen molecules be any type of biomolecule present in the pathogen and the relationship between antigens in pathogenic bacteria and antibodies of the immune system is based on the binding between them (antigens and antibodies) which is fundamental during certain specific immune responses.
Learn more about antigens here:
https://brainly.com/question/7597406
#SPJ1
Why don’t different varieties of corn plants grow to the same size under similar growing conditions?
2. The nonmetals in the Groups 16 and 17________
a) lose electrons when they form ions
b) gain electrons making them an anion
c) all have ions with a -1 charge
d) end in -ate
All of the ions in groupings 16 and 17 of nonmetals have a charge of -1. Spontaneous non-metals include brittle both thermally & electrically insensitive compounds.
What other names do non-metals have?Non-metals are elements that frequently gain electrons during chemical processes to generate anions. These substances are electronegative ones. They lack luster, are fragile, and are poor heat- and electricity-conductors (except graphite). Non-metals come in solid, liquid, or gaseous forms.
What 20 nonmetals are there?Lithium, Beryllium, Sodium, Mg, Aluminum, Potassium, & Calcium are the minerals within the first twenty elements. Hydrocarbons, Helium, Carbo, Nitrogen, Oxygen, Hydrochloric acid, Neon, Phosphorous, Sulphur, Chlorinated, and Argon now comprise the non-metals that comprise the first twenty elements.
To know more about nonmetals visit:
https://brainly.com/question/2273750
#SPJ1
Sep Obtain Information What are the Limitations to Making Progress with Engineering Better Batteries ? What progress have Battery Engineers Made?
Limitations in making progress with Engineering Better Batteries is that electric vehicles are being prevented to make progress in terms of size and range , progress which is made is solid state batteries.
What are solid state batteries?
A solid-state battery is a battery technology that uses solid electrodes and a solid electrolyte, instead of the liquid or polymer gel electrolytes which are found in lithium-ion or lithium polymer batteries.
While solid electrolytes were first discovered in the 19th century, several drawbacks have prevented it's widespread application. Developments in the late 20th and early 21st century have caused renewed interest in solid-state battery technologies, especially in the context of electric vehicles, starting in the 2010s.
Solid-state batteries can provide potential solutions for many problems of liquid Li-ion batteries, such as flammability, limited voltage, unstable solid-electrolyte interphase formation, poor cycling performance and strength.
Learn more about solid state batteries,here:
https://brainly.com/question/17683368
#SPJ1
What is the mass of a 8.45 m3 piece of copper?
The mass of a 8.45 m3 piece of copper is 7537.4 grams.
What is mass?Mass is described as a dimensionless quantity representing the amount of matter in a particle or object.
density of copper =8.92g/cm^3
volume = 8.45 x 100 cm^3
mass = (8.45 x 100) x 8.92
mass = 7537.4 grams.
The relationship between mass, density and volume is that density offers a convenient means of obtaining the mass of a body from its volume or vice versa.
This means that the mass is equal to the volume multiplied by the density (M = Vd), while the volume is equal to the mass divided by the density (V = M/d).
Learn more about mass at: https://brainly.com/question/19385703
#SPJ1
order these elements by decreasing electron affinity:
Na, Al, S, K, F
Answer:
increasing to decreasing:
F--- S--- Al--- Na--- K
not sure...
18-38 Name the following ketones and aldehydes. When possible, give both a common name and an IUPAC name.
(a) CH₃CO(CH₂) ₄CH₃
(b) CH₃(CH₂)₂CO(CH₂)₂CH₃
(c) CH₃(CH₂)CHO₅
(d) PhCOPh
(e) CH₃CH₂CH₂O
(f) CH₃COCH₃
(g) CH₃CH₂CHBrCH₂CH(CH₃)CHO
(h) Ph --- CH = CH ----CHO
(i) CH₃CH= CH---CH = CH --CHO
The IUPAC name of the following organic compounds are,a) hept-2-one b) hept-4-one c) heptanal d) diphenylmethanone e) propan-1-one f) acetone g) 3-bromo-1-hexanal h) 3-phenylprop-2-enal i) 2,4-hexdiene-1-al.
What is a compound?Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.
They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.
Learn more about compound,here:
https://brainly.com/question/13516179
#SPJ1
You pour some hot water into a metal cup. After a minute,
you notice that the handle of the cup has become hot.
Explain, using your knowledge of heat transfer, why the
handle of the cup heats up. How would you design the cup so
that the handle does not heat up?
Heat transfer is the movement of thermal energy from a temperature that is higher to one that is lower.
Thermoenergy: What is it?The energy that exists in a system and controls its temperature is known as thermal energy. Heat is thermal energy in motion. Thermodynamics is a comprehensive field of physics that examines how heat and work are transferred between diverse systems.
Energy of what kind is thermal energy?The energy that results from atoms and molecules moving around within a substance is known as thermal energy, often known as heat. When these particles move more quickly, heat is produced. Geothermal energy is the earth's heat energy. Energy held within motion is referred to as motion energy.
To know more about thermal energy visit:
https://brainly.com/question/18989562
#SPJ1
O
Question 2 of 10
Which of the following values best classifies a bond between 2 atoms as
being covalent?
A. An electronegativity difference of greater than 2.7 between the
atoms
B. An electronegativity difference of greater than 1.7 between the
atoms
C. An electronegativity difference of less than 1.7 between the atoms
D. An electronegativity difference of less than 2.7 between the atoms
← PREVIOUS
SUBMIT
A bond between 2 atoms as being covalent an electronegativity difference of greater than 1.7 between the atoms.
What is bond?Bond is a debt instrument, which is issued by governments and corporations. These bonds are used to raise capital for various projects and investments. Bonds are a form of loan and investors are usually paid a fixed interest rate for lending their money. Bonds are typically issued for a fixed period of time, usually for a period of 5-30 years, and have a fixed maturity date. Investors receive interest payments at regular intervals and receive the principal amount of the bond at the end of the period.
To learn more about bond
https://brainly.com/question/29794367
#SPJ1
I need help in this please
it reflects back into the glass with a 45 degree angle of reflection.
What is refraction?The direction of the light changes as it passes through the air-water barrier. Refraction is the name for this phenomenon. Filling a glass with water and inserting a straw will make it simple to see. It will seem as though the straw is shattered.
Because light travels at a different speed in air and water, refraction takes place. The electromagnetic properties of a specific medium, which differ for air and water, determine the speed at which a light wave propagates in that medium. The speed of light in the air is very near to the vacuum's speed of light, which is 3*108 m/s. The speed of light is slower underwater. Consequently, The direction of the light changes as it passes through the air-water barrier. Refraction is the name for this phenomenon. Filling a glass with water and inserting a straw will make it simple to see. It will seem as though the straw is shattered.
A form of break occurs in the wavefront of propagating light when it encounters the air-water barrier, causing the ray of light to diverge from its original path. (Please go to the reference link for a more thorough explanation and instructions on how to calculate the light's refraction angle.)
Learn about Refraction here: https://brainly.com/question/27932095
#SPJ1
what is van't hoff factor?
state the formulas to calculate " i " during association or dissociation.
tysm! :)
The relationship between the calculated concentration of a material and the actual concentration of particles is known as the Van't Hoff factor.
I is the difference between a typical or theoretical colligative quality and an observable one.
What does the connection van t Hoff factor mean?The van 't Hoff factor is the difference between the concentration of a material determined by its mass and the concentration of particles actually formed when the substance is dissolved. The van 't Hoff factor is virtually 1 for the majority of non-electrolytes dissolved in water.
What does Van t Hoff factor mean in terms of connection and dissociation?For dissociation, association, and the non-electrolyte solute, the Van't Hoff factor value is more than one, less than one, and equal to one respectively.
to know more about concentration visit :-
https://brainly.com/question/12970323
#SPJ1
For the reaction H2(g) +O2(g) — H2O (g) how many liters of water can be made from 5 L of oxygen gas at 37.0 Celsius, 1.76atm and an excess of hydrogen?
Answer:
12.5 L
Explanation:
Part 1 - Finding Number of moles
First thing we need to find out is number of moles of oxygen gas. We can achieve this using the formula: PV=nRT
Pressure (Pa) x Volume (cubic meters) = no. moles x gas constant (8.31 J/K*mol) x Temperature (K)
We can rearrange this formula to solve for no. moles:[tex]n=\frac{PV}{RT}[/tex] and plug in the values to solve.
1 atm = 1.01325 x 10^5 Pa, therefore 1.76atm = [tex]1.76*1.01325*10^{5} =178332Pa[/tex]
1 L = 1 x 10^-3 m^3, therefore 5L = [tex]5*1*10^{-3}=5*10^{-3}m^{3}[/tex]
Finally Kelvin = Celsius + 273.15, therefore 37.0C = [tex]37.0+273.15=310.15K[/tex]
Substituting this all back into the formula we get:
[tex]n=\frac{(178332)(5*10^{-3})}{(8.31)(310.15)}[/tex]
[tex]n=\frac{891.66}{2577.3465}[/tex]
[tex]n=0.346[/tex] moles (3.s.f)
Part 2 - Balancing Equation
The equation given is not balanced so we need to balance it to find the correct molar ratio. We can start by balancing the oxygens as there are less of them. We can see that there are 2 oxygen atoms on the left as denoted by 'O2' but only one on the right in 'H2O', therefore we can add a two in front of the H2O on the right side to balance the oxygen atoms:
[tex]H_{2(g)} +O_{2(g)} - > 2H_{2} O_{(g)}[/tex]
Now we have four hydrogens on the right side so we have a 2 in front of H2 on the left hand side to balance the hydrogens:
[tex]2H_{2(g)} +O_{2(g)} - > 2H_{2} O_{(g)}[/tex]
And voila! The equation is balanced and shows the correct molar ratio.
Part 3 - Calculating moles of water
As we can see from the molar ratio in the balanced equation, every mole of O2 will produce two moles of H2O- the ratio is 1:2. As we have an excess of hydrogen, we only need to worry about the amount of oxygen we have. Therefore to calculate the number of moles of water that can be made we simply need to multiple by the ratio:
[tex]0.346*2=0.692[/tex] moles of water
Part 4 - Converting to Liters
Finally, to convert our amount of moles into volume, we can use water's molecular mass to find the mass and then its density to find its volume. Water's molecular mass is 18.02gmol^-1 (2x1.01+16.00) and its density is 997kg/m^3.
m=nM (mass = no. moles x molecular mass): m=[tex]0.692*18.02=12.46984g[/tex]
rho = m/v (density = mass/volume): [tex]997=12.46984/v[/tex], therefore [tex]v=0.0125m^{3}[/tex]
Finally as mentioned above, 1 L = 1 x 10^-3 m^3, therefore the volume of water that can be made is 12.5 Liters.
If hydrogen diffuses at the rate of 10 cm³ per second from a given apparatus under given conditions of temperature and pressure, calculate under same conditions: a) the volume of oxygen (O₂) which diffuses in 20 seconds
Answer:
Volume of O₂ = 200cm³
Explanation:
Rate of diffusion of gas is directly and inversely proportional to the volume and time taken for the gas to diffuse completely.
Volume
R = -----------
time
let R₁ represent the rate at which the given volume of hydrogen gases diffuses and R₂ represent the rate at which the the volume of the oxygen gas diffused.
V₁, V₂, T₁ and T₂ follows the same process
If the two gases diffuses at the same rate, then;-
R₁ = R₂
V₁ V₂
---------- = ------------
T₁ T₂
V₂
10 = ----------------
20
V₂ = 20•10
V₂ = 200cm³
Therefore, the volume of oxygen that could diffuse in 20 seconds is 200cm³
PROBLEM 1.22 Give the hybridization state of each carbon in the following
compounds:
(a) Carbon dioxide (0 = C = O)
(d) Propene (C*H_{3}*CH = C*H_{2})
(b) Formaldehyde (H_{2}*C = O)
(e) Acetone [(CH 3 ) 2 C = OI
(c) Ketene (H_{2}*C = C = O)
(f) Acrylonitrile ( C*H_{2} =CHC equiv N)
SAMPLE SOLUTION
(a) Carbon in C*O_{2} is directly bonded to two other atoms. It
is sp-hybridized.
To solve this we must be knowing each and every concept related to hybridisation. Therefore, the hybridisation of the given molecule can be given as below.
What is hybridisation?Only during bond formation does hybridization occur, not in an individual gaseous atom. If the bonding of a molecule is known, the geometry of the molecule may be predicted.
compound hybridisation
Carbon dioxide (0 = C = O) sp
Propene (CH[tex]_3[/tex]CH = CH[tex]_2[/tex]) sp³, sp²,sp²
Formaldehyde (H[tex]_2[/tex]C = O) sp²
Acetone [(CH[tex]_3[/tex] )[tex]_2[/tex] C = O sp³, sp², sp³
Ketene (H[tex]_2[/tex]C = C = O) sp², sp
Therefore, the hybridisation of the given molecule can be given as above.
To learn more about hybridisation, here:
https://brainly.com/question/29290058
#SPJ1
I need help please in this:(
Answer:
That would be A sir or Miss
Explanation: Tell me if I am wrong, Also hope this helped you!
I want to know how to solve this question by step by step.
Question: What is the pH value of 500ml of an aqueous solution of 0.005 mol HCl ?
The pH value of 500 mL of an aqueous solution of 0.005 mole HCl is 2
How do I determine the pH of the solution?We'll begin our calculations by obtaining the molarity of the solution. Details below:
Volume of solution = 500 mL = 500 / 1000 = 0.50 LMole of HCl = 0.005 moleMolarity = ?Molarity = mole / volume
Molarity = 0.005 / 0.50
Molarity = 0.01 M
Next, we shall obtain the concentration of the hydrogen ion, H⁺ in the solution. Details below:
HCl(aq) <=> H⁺(aq) + Cl¯(aq)
From the balanced equation above,
1 mole of HCl contains 1 mole of H⁺
Therefore,
0.01 M HCl will also contain 0.01 M H⁺
Thus, the concentration of the hydrogen ion, H⁺ in the solution is 0.01 M
Finally, we shall determine the pH of the solution. Details below:
Concentration of hydrogen ion [H⁺] = 0.01 MpH of solution =?pH = -Log H⁺
pH = -Log 0.01
pH = 2
Thus, we can conclude that the pH of the solution is 2
Learn more about pH:
https://brainly.com/question/22983829
#SPJ1
An experiment requires 65.00 g of sodium chloride. Sodium chloride is available at a price of $179.0 per 5.000 kg sodium chloride. What is the cost of the sodium chloride in the experiment (reported to the hundredths place because we're working with dollars)?
Answer: on
Explanation:5
The price of sodium chloride per 5 kg is 179 dollars. The experiment requires 65 g of NaCl. The price of65 g or 0.065 kg is 2.3 dollars.
What is sodium chloride?Sodium chloride is an ionic compound formed by the combination of sodium metal and chlorine atom. Sodium metal has extra one electron in its valance shell and chlorine needs one more electron into its valence shell. Hence sodium donates its valence electron to chlorine forming NaCl.
NaCl is used as the table salt in food. It is a very important compound in our daily diet. Similarly NaCl is industrially important for many reaction especially in electrochemical processes.
It is given that, the price of 5 kg of NaCl = $179
required mass of NaCl = 65 g = 0.065 Kg
then , price of 0.065 kg = (0.065 × 179 /5) = $2.31
Therefore, the cost of NaCl in the experiment is 2.31 dollars.
Find more on NaCl:
https://brainly.com/question/4487559
#SPJ2
Combustion of 1.125 of an unknown compound containing carbon, hydrogen, and oxygen resulted in 1.649g of CO2 and 0.675g of H2O. If the molar mass is 180g/mol What is the molecular formula?
CxHyOz + O2 → CO2 + H2O
The molecular formula of the unknown compound, given that it contains carbon, hydrogen, and oxygen is C₆H₁₂O₆
How do I determine the molecular formula?First, we'll begin by obtaining the mass of carbon, hydrogen and oxygen. Details below:
For Carbon
Mass of CO₂ = 1.649 gMolar mass of CO₂ = 44 g/mol Molar of C = 12 g/mol Mass of C =?Mass of C = (12 / 44) × 1.649
Mass of C = 0.45 g
For Hydrogen
Mass of H₂O = 0.675 gMolar mass of H₂O = 18 g/mol Molar of H = 2 × 1 = 2 g/mol Mass of H =?Mass of H = (2 / 18) × 0.675
Mass of H = 0.075 g
For Oxygen
Mass of compound = 1.125 gMass of C = 0.45 gMass of H = 0.075 gMass of O =?Mass of O = (mass of compound) - (mass of C + mass of H)
Mass of O = 1.125 - (0.45 + 0.075)
Mass of O = 0.6 g
Next, we shall determine the empirical formula. details below:
C = 0.45 gH = 0.075 gO = 0.6 gEmpirical formula =?Divide by their molar mass
C = 0.45 / 12 = 0.0375
H = 0.075 / 1 = 0.075
O = 0.6 / 16 = 0.0375
Divide by the smallest
C = 0.0375 / 0.0375 = 1
H = 0.075 / 0.0375 = 2
O = 0.0375 / 0.0375 = 1
Thus, the empirical formula of the compound is CH₂O
Finally, we shall determine the molecular formula. Details below:
Molar mass of compound = 180 g/molEmpirical formula = CH₂OMolecular formula =?Molecular formula = empirical × n = mass number
[CH₂O]n = 180
[12 + (2×1) + 16]n = 180
30n = 180
Divide both sides by 30
n = 180 / 30
n = 6
Molecular formula = [CH₂O]n
Molecular formula = [CH₂O]₆
Molecular formula = C₆H₁₂O₆
Learn more about molecular formula:
https://brainly.com/question/21568927
#SPJ1
What is the hybridization of all the atoms (other than hydrogen) in each of the following species?
Drag the appropriate items to their respective bins.
The hybridization of C in HCN is sp because, carbon is triple bonded to the nitrogen. Hybridization of N in HCN is also sp. Hybridization of nitrogen in NH₄ is sp³.
What is hybridization?When tow atoms combines to form a molecules, the energy of individual atomic orbitals redistribute to form hybrid orbitals of equivalent energy. The type of hybridization s based on the on the involvement of s, p or d orbitals of the atom.
In HCN, carbon is triple bonded to nitrogen. Here, both s and p orbital contribution is 50%. Hence, both C and N in HCN in sp hybridized.
In NH₄, the nitrogen is sigma bonded to each hydrogen and the hybridization of N is sp³ here since, 3 p orbitals of nitrogen and one s orbital are involved.
In CH₃-, C is sp² hybridized and in CH₃⁺ , C is sp³ hybridized. The C in C(CH₃)₄ is also sp³ hybridized where carbon involves sigma bonds with the methyl groups.
N in NH₃ is sp³ hybridized. Oxygen in water is sp² hybridized. When water abstracts one more proton forming H₃O⁺ , oxygen forms sp³ hybridized orbitals.
Find more on hybridization:
https://brainly.com/question/14140731
#SPJ1
A dairy is mainly involved in the operations of bottling of milk, making ice-cream and limited production of cheese. Calculate the BOD produced per 1000kg of milk processed and its population equivalent from the following data;
Quantity of milk processed daily=150000kg Waste water produced daily =240m3 BOO of waste water =1400mg/I Population equivalent per capita per day of 5-days BOD at 20C°=75g
Answer:
BOD produced per 1000kg of milk processed = (1400mg/I x 240m3) / 150000kg = 0.192mg/I
Population equivalent = (0.192mg/I x 75g) / 5 = 0.576g
Explanation:
how do you test the methods of cleaning an oil spill while not risking the lives of the organisms
Answer:
Get a controlled environment, such as a pool or even a bowl. Pour some oil in it then you can test your solutions without causing any damage.
Explanation:
Explain how an incorrect of dietary information on high blood sugar could potentially affect the patient’s
Long-term (months or years) high blood sugar levels can cause irreversible harm to organs such the kidneys, blood vessels, eyes, nerves, and nervous system. Speak with your doctor or the diabetes care team if you frequently have hyperglycemia.
What effects could an extremely high blood sugar level have on us?If left untreated, having excessive blood sugar levels for an extended length of time might lead to major health issues. In addition to raising the risk of heart disease, stroke, kidney illness, vision issues, and nerve issues, hyperglycemia can harm the blood arteries that provide blood to essential organs.
What dietary requirements are impacted by diabetes?A high-fat, high-calorie, and high-cholesterol diet
To know more about high blood sugar visit:-
https://brainly.com/question/29749982
#SPJ1
What is the number of moles of K+ ions are present in 250 mL of a 0.4M KCl solution?
a. 0.1 mol c. 0.62 mol
b. 0.16 mol d. 1.6 mol
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 0.025 is the number of moles of K+ ions are present in 250 mL of a 0.4M KCl solution.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
Molarity= number of moles of solute/volume of solution in litre
Substituting values in equation 1
0.4M=number of moles of solute/0.25
number of moles of solute=0.025moles
Therefore, 0.025 is the number of moles of K+ ions are present in 250 mL of a 0.4M KCl solution.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ1