A scientist plans to find out the cause of decrease in bird population in a location. He interviews 50 people who work in the local oil mine and 45 of them believe that the mine does not affect the birds. The scientist concludes that 90 percent of people in the location believe that the local oil mine does not cause decrease in bird population. Why is the scientist's conclusion most likely unreliable? (2 points)

Group of answer choices

a. the results of the investigation cannot be repeated

b. the source of information could be biased

c. bird population cannot be measured accurately

d. the investigation is done by only one person

Answer:

I'm on the exact same queston

Answer:

The test variable (independent variable) controls the outcome variable (dependent variable)

Explanation:

its right on study island

Answer:

blocks 1 and 2 the rhdh huff hgfhh5

Answer:(trick question) once the salt has dissolve  in the water it is no longer visible

Thank you! have an amazing day.

Explanation:

U need to draw the graph first and make a line at 17 pennies, where the line of 17 pennies and your graph meet is the mass of it(at y axis)

Answer:

A. exist in fixed amounts or available in limited supplies

Explanation:

Answer:

A

Explanation:

Answer:

Phagocytosis

Explanation:

Answer:

6.7

⋅

10

23

atoms of H

Explanation:

Answer:

k Nishant

Explanation:

i don't know sorry but u can search in google

Answer:

= .7567105263

Explanation:

1 atm = 760 mmHg

575.1 mmHg (1 atm/760mmHg) = .7567105263 atm

Answer:

ΔU = −55.45 kJ

Explanation:

From first law of thermodynamics in chemistry, we have;

ΔU = Q + W

where;

ΔU is change in internal energy

Q is the net heat transfer

W is the net work done

We are given;

Q = 74.6 kJ

But Q will be negative since heat is released

Thus;

ΔU = -74.6 kJ + W

We are given;

Constant pressure; P = 35 atm = 35 × 101325 = 3546375 N/m²

Volume before reaction; Vi = 8.2 L = 0.0082 m³

Volume after reaction; V_f = 2.8 L = 0.0028 m³

Now,

W = -P(V_f - V_i)

W = - 3546375(0.0028 - 0.0082)

W = 19.15 KJ

Thus;

ΔU = Q + W

ΔU = -74.6 kJ + 19.15 KJ =

ΔU = −55.45 kJ

Answer: 2681.81

Explanation:

Answer:

We are given:

mass of the block = 3500 grams

volume of the block = 1000 mL

Finding the density:

Density = mass of the object (in grams) / volume of the object (in mL)

Density = 3500 / 1000

Density = 3.5 g / mL

Answer: The percent yield of this combination reaction is 41.3 %

Explanation : Given,

Mass of [tex]Na[/tex] = 5.0 g

Mass of [tex]Cl_2[/tex] = 10.0 g

Molar mass of [tex]Na[/tex] = 23 g/mol

Molar mass of [tex]Cl_2[/tex] = 71 g/mol

First we have to calculate the moles of [tex]Na[/tex] and [tex]Cl_2[/tex].

[tex]\text{Moles of }Na=\frac{\text{Given mass }Na}{\text{Molar mass }Na}[/tex]

[tex]\text{Moles of }Na=\frac{5.0g}{23g/mol}=0.217mol[/tex]

and,

[tex]\text{Moles of }Cl_2=\frac{\text{Given mass }Cl_2}{\text{Molar mass }Cl_2}[/tex]

[tex]\text{Moles of }Cl_2=\frac{10.0g}{71g/mol}=0.141mol[/tex]

Now we have to calculate the limiting and excess reagent.

The balanced chemical equation will be:

[tex]2Na+Cl_2\rightarrow 2NaCl[/tex]

From the balanced reaction we conclude that

As, 2 mole of [tex]Na[/tex] react with 1 mole of [tex]Cl_2[/tex]

So, 0.217 moles of [tex]Na[/tex] react with [tex]\frac{0.217}{2}=0.108[/tex] moles of [tex]Cl_2[/tex]

From this we conclude that, [tex]Cl_2[/tex] is an excess reagent because the given moles are greater than the required moles and [tex]Na[/tex] is a limiting reagent and it limits the formation of product.

Now we have to calculate the moles of [tex]NaCl[/tex]

From the reaction, we conclude that

As, 2 mole of [tex]Na[/tex] react to give 2 mole of [tex]NaCl[/tex]

So, 0.217 mole of [tex]HCl[/tex] react to give 0.217 mole of [tex]NaCl[/tex]

Now we have to calculate the mass of [tex]NaCl[/tex]

[tex]\text{ Mass of }NaCl=\text{ Moles of }NaCl\times \text{ Molar mass of }NaCl[/tex]

Molar mass of [tex]NaCl[/tex] = 58.5 g/mole

[tex]\text{ Mass of }NaCl=(0.217moles)\times (58.5g/mole)=12.7g[/tex]

Now we have to calculate the percent yield of this reaction.

Percent yield = [tex]\frac{\text{Actual yield}}{\text{Theoretical yield}}\times 100[/tex]

Actual yield = 5.24 g

Theoretical yield = 12.7 g

Percent yield = [tex]\frac{5.24g}{12.7g}\times 100[/tex]

Percent yield = 41.3 %

Therefore, the percent yield of this combination reaction is 41.3 %

Answer:

The correct option is C

Explanation:

Chemical equilibrium is a state in which there is no net change in the amount of reactant and products formed over time. This reaction is a reversible reaction, hence the reaction can keep proceeding in either direction until the products formed are equal in mass to that of the reactants or the products been reversed back to the reactants until both sides (product and reactant) achieve equal mass.

Answer:

1.3x10⁻⁸ mol/L

Explanation:

0.0013μmol, Calculate concentration in mol/L

To obtain concentration in mol/L we need to convert the μmoles to moles and mL to liters:

Moles silver(II) oxide:

0.0013μmol × (1mol / 1x10⁶μmol) = 1.3x10⁻⁹ moles

Liters solution:

100mL * (1L / 1000mL) = 0.1L

That means concentration in mol/L is:

1.3x10⁻⁹ moles / 0.1L =

Answer : The number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.

Explanation : Given,

Concentration of NaBr = 0.200 M

Volume of solution = 100.0 mL = 0.1 L      (1 L = 1000 mL)

First we have to calculate the moles of NaBr.

[tex]\text{Moles of NaBr}=\text{Concentration of NaBr}\times \text{Volume of solution in L}[/tex]

[tex]\text{Moles of NaBr}=0.200M\times 0.1L=0.02mol[/tex]

Now we have to calculate the moles of precipitate, [tex]PbBr_2[/tex] formed.

The balanced chemical reaction is:

[tex]2NaBr(aq)+Pb(NO_3)_2(aq)\rightarrow PbBr_2(s)+2NaNO_3(aq)[/tex]

From the balanced chemical reaction we conclude that:

As, 2 moles of NaBr react to give 1 mole of [tex]PbBr_2[/tex]

So, 0.02 moles of NaBr react to give [tex]\frac{0.02}{2}=0.01[/tex] mole of [tex]PbBr_2[/tex]

Therefore, the number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.

The number of mole of the precipitate (i.e PbBr₂) formed when 100 mL of 0.2 M NaBr react with excess Pb(NO₃)₂ is 0.01 mole

Volume = 100 mL = 100 / 1000 = 0.1 L

Molarity of NaBr = 0.2 M

Mole = Molarity x Volume

Mole of NaBr = 0.2 × 0.1

2NaBr(aq) + Pb(NO₃)₂(aq) → PbBr₂(s) + 2NaNO₃ (aq)

From the balanced equation above,

2 moles of NaBr reacted to produce 1 mole of PbBr₂.

Therefore,

0.02 mole of NaBr will react to produce = [tex]\frac{0.02}{2} \\\\[/tex] = 0.01 mole of PbBr₂.

Thus, the number of mole of the precipitate (i.e PbBr₂) produced from the reaction is 0.01 mole

Learn more: https://brainly.com/question/19572703

Answer:

pressure

Explanation:

pressure is the amount of force exerted on an area. when you blow up the balloon you're filling it with gas particles. the gas particles move freely within the balloon and may collide with one another exerting pressure on the inside of the balloon.

The pressure of the gas is the amount of force that is exerted on a balloon by the gas inside the balloon. Therefore, option B is correct.

Pressure can be described as the force applied perpendicular to the surface of a body per unit area. Pressure can be defined as a standard mechanical quantity and is derived from a unit of force divided by a unit of area.

The SI unit of measurement of pressure, the pascal (Pa) or Newton per square meter (N/m²). Pressure can be defined as the amount of force exerted perpendicular to the surface per unit area.

Mathematically, the pressure exerted by force can be calculated as:

[tex]{\displaystyle p={\frac {F}{A}}}[/tex]

where, p is the pressure, F is the magnitude of the normal force, and A is the area of the surface.

Therefore, the amount of force that is exerted on the balloon by the gas inside the balloon is equal to pressure.

Learn more about pressure, here:

https://brainly.com/question/27637460

#SPJ2

Answer:

[tex]\%\ Error = 21.5\%[/tex]

Explanation:

Given

[tex]Measured = 24.5[/tex]

[tex]Actual = 31.2[/tex]

Required

Determine the percentage error

First, we need to determine the difference in the measurement

[tex]Difference = |Actual - Measured|[/tex]

[tex]Difference = |31.2 - 24.5|[/tex]

[tex]Difference = |6.7|[/tex]

[tex]Difference = 6.7[/tex]

The percentage error is calculated as thus:

[tex]\%\ Error = \frac{Difference * 100\%}{Actual}[/tex]

[tex]\%\ Error = \frac{6.7 * 100\%}{31.2}[/tex]

[tex]\%\ Error = \frac{670\%}{31.2}[/tex]

[tex]\%\ Error = 21.4743589744\%[/tex]

[tex]\%\ Error = 21.5\%[/tex] approximated

Answer:

The structure of the atom

Answer:

Invasive species are an organism that causes ecological or economic harm in a new environment where it's not native.

Explanation:

An invasive species can harm both the natural resources in the ecosystem as well it threaten the human use of these resources and invasive species can be introduced to a new area via the ballast water of oceangoing ships, intentional and accidental releases of aquaculture species, aquarium specimens or bait, and etc.

Invasive species is capable of causing extinctions to native plants and animals, reducing biodiversity, competing with native organisms for limited resources, and altering habitats. This can also result a huge economic impacts and fundamental disruptions of coastal and the great lakes of the ecosystems.

I hope it helps you.

Answer:

The correct answer is b.

Explanation:

hope this helps u

Answer:

Bryna is correct it is B

Explanation:

Answer:

See explanation

Explanation:

A popular experiment that describes the effect of heat on the position of equilibrum is the change of colour when copper II chloride is heated.

As the solution is heated, it's colour changes from blue to green, this implies the the colour change (blue to green) is an endothermic process (equilibrum position shifts to the right with increase in temperature)

The equilibrum is represented by the equation;

[Cu(H2O)6]^2+(aq) + 4Cl^-(aq)<------>[CuCl4]^2-(aq) + 6H2O(l) ∆H=positive

The equilibrium mixture undergoing cooling or heating have colour changes. The temperature affects the colour of the products formed and the forward reaction is endothermic.

In the reaction copper (II) chloride or [tex]\rm CuCl_{4}[/tex] is the main species. The heat or the temperature affects the colour formation of copper (II) chloride as the equilibrium change affects the colouration of the product.

The heating of the solution affects the colour change from blue to the green of the reactant to products and the forward reaction shifts the equilibrium towards the right when the temperature is increased and is an endothermic reaction.

The reaction at the equilibrium can be shown as,

[tex]\rm [Cu(H_{2}O)_{6}]^{2+} (aq) + 4Cl^{-} (aq) \Leftrightarrow [CuCl_{4}]^{2-}(aq) + 6H_{2}O(l), \Delta H=positive[/tex]

Therefore, temperature changes the colouration and the forward reaction is an endothermic reaction.

Learn more about temperature and equilibrium here:

https://brainly.com/question/13356990

Answer:

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\ [/tex]

From the question

mass = 15.5 g

density = 6.89 g/mL

We have

[tex]volume = \frac{15.5}{6.89} \\ = 2.249637155...[/tex]

We have the final answer as

Hope this helps you