A student suggests that the colorless liquid collected in the U‐tube is water.
Describe how to test the colorless liquid to show it contains water.

Ernest Rutherford suggested the Rutherford Atomic Model, often known as the Rutherford Model, as a nuclear atom or planetary model of the atom in 1911.

Rutherford's model was unable to explain why atoms are stable. The charged particles known as electrons should ultimately run out of energy and collide with the nucleus if they are continuously rotating around it.

According to the idea, an atom has a tiny, compact, positively charged center called a nucleus, where almost all of the mass is concentrated, while light, negatively charged particles called electrons orbit far around it, much like planets orbit the Sun.

The majority of the atom's space is vacant, according to three key findings of the experiment.

The nucleus is a very small region inside the atom where all the positive charges are gathered.

In comparison to the size of the atom, the size of the nucleus is extremely small.

Learn more about atom at:

brainly.com/question/1266835

#SPJ1

Answer:

a cloud of adult stars that floats through space where protostars are born.

Explanation:

hope this helped:)

brainliest for the brains:)

Answer: 5 moles of water

Explanation:

took the test

When 7 moles of hydrogen react with 3 moles of oxygen, 6 moles of water are produced according to balanced equation. The correct answer is D) 6 moles of water.

2H₂ + O₂ → 2H₂O

2 moles of hydrogen gas react with 1 mole of oxygen gas to produce 2 moles of water.

hydrogen gas to produce 7moles × [tex]\frac{2 moles water}{2moles hydrogen}[/tex] =7moles water.

oxygen gas to produce 3 moles × [tex]\frac{2 moles of water}{1 mole oxygen}[/tex]=6moles water.

7 moles of hydrogen and 3 moles of oxygen are required to produce 7 moles of water while 6 moles of water are produced by 3 moles of oxygen. Due to the availability of oxygen the law of limiting reactants requires that a smaller amount of product 6 moles be produced.

To know more about moles here

brainly.com/question/34302357

#SPJ2

An atom loses three electrons to form ions with a +3 charge, cations have a positive charge.

Because there are fewer negatively charged electrons remaining to balance the positive charges of the protons in the nucleus, losing electrons causes atoms to gain a positive charge.

Group IIA elements lose two valence electrons to achieve the electron configuration of the noble gas that comes before them in the periodic table.

Therefore, an atom loses three electrons to form ions with a +3 charge to an atom gain a positive 3 charge.

Learn more about atoms, here:

https://brainly.com/question/8478770

#SPJ1

The solution in question composed has a pH of 10.

The Henderson-Hasselbalch equation is what.

The acid dissociation constant and pH of acids are related by the Henderson-Hasselbalch equation (ka). When the concentration of the acid and its conjugate base are known, the pH of a buffer solution can be computed using this equation.

The following is how the Henderson-Hasselbalch equation is expressed:

Conjugate base/acid logarithm: pH = pKa +

Given that the acid to base ratio is 0.18

The conjugate base to acid ratio is then equal to 1/0.18 = 5.56.

The acid dissociation constant has a value of 5.6 1010 (ka).

pKa = -log ka represents the value.

So, pH is equal to -log Ka plus log(conjugate base/acid).

pH equals (5.6 1010) -log + log (5.6)

pH is equal to -log 5.6 - log 10 - +0.748.

pH = -0.748 + 10 + 0.748

pH = 10

To learn more about composed please click on below link

https://brainly.com/question/22982113

#SPJ4

We should not drink alcohol or any type of carbonated drink out of pewter. It should be noted that antique pewter, as well as cheaper eastern pewter, may contain lead.

This discolors to a grey-blue color over time. Drinking a beverage from a tankard made of leaded pewter or lower grades of pewter can be harmful to your health over time. Alcoholic beverages should not be stored in pewter for more than 24 hours, and carbonated beverages should never be stored in pewter vessels. Avoid foods that may stain, such as citrus juice and certain salad dressings.

Pewter is a metal alloy composed primarily of tin, with the remainder typically consisting of copper, antimony, bismuth, and (occasionally) silver. Lead was used in the past, but it is no longer considered safe.

To know more about Pewter pitcher visit :-

brainly.com/question/29627686

#SPJ4

Alcohol and other fizzy beverages should never be consumed from pewter. It should be noted that both expensive eastern pewter and ancient pewter may contain lead.

Over time, this turns a grey-blue colour. Over time, consuming liquids from a tankard made of leaded pewter or lesser pewter grades might be detrimental to your health.

Tin dominates the composition of the metal alloy known as pewter, with copper, antimony, bismuth, and (rarely) silver making up the majority of the remaining ingredients. Although lead was once used, it is no longer regarded as safe.

To know more about pewter visit ;-

https://brainly.com/question/29626769

#SPJ4

Metals are known to be more malleable and ductile than ionic and covalent compounds because the electrons in metals are shared among all of the metal atoms in the sample, forming an electrons "sea" surrounding the metal ions.

A "sea" of shared electrons surrounds the metal ions in a metallic composition composed of all metal atoms. This electron sea is assumed to be responsible for several of metals' distinctive features, including strong conductivity, malleability, and ductility.

Because of the electron sea in a metallic body, metal ions can readily pass by one another and twist the metal without breaking it. The strong chemical connections that hold ionic and covalent compounds together, on the other hand, make it more difficult to change them without rupturing the bonds. Ionic and covalent compounds are less ductile and malleable than metals because of this.

Read more on ionic and metallic substances.

https://brainly.com/question/1103156?referrer=searchResults

#SPJ4

Freezing point depression of 0.4 m NaCl solution is twice that of of 0.4 m glucose solution.

What is freezing point?

When the temperature of a liquid falls below its freezing point, it transforms into a solid. According to the internationally accepted definition, freezing is the solidification phase change of a liquid or the liquid content of a substance caused by cooling.

Most substances have the same melting and freezing points; however, certain substances have different solid-liquid transition temperatures. Agar, for example, exhibits hysteresis in its melting and freezing points. It melts at 85 °C (185 °F) and solidifies at 32 °C to 40 °C (89.6 °F to 104 °F).

0.4M NaCl solution has nearly twice the freezing point depression T f as 0.4M glucose solution.

T f = I K f m

Here, m is the molality of solution, which is approximately equal to the molarity M of solution, and vant Hoff factor is mM I

i=1 for non-electrolyte glucose because it does not dissociate. i=2 for the electrolyte NaCl because one molecule of NaCl dissociates to give two ions.

Because T f I for any given value of m, the freezing point depression (T f ) of 0.4M NaCl solution is nearly twice that of 0.4M glucose solution

Hence, freezing point depression of 0.4 m NaCl solution is twice that of of 0.4 m glucose solution.

To know more about freezing point from given link

https://brainly.com/question/24314907

#SPJ4

Enzyme Active Sites and their Reaction Mechanisms, Harry Morrison, 2021 α - The "hydrolytic enzyme" chymotrypsin (EC 3.4.21.1; chymotrypsinogen .

A) belongs to the superfamily of serine proteases and hydrolyzes peptide bonds by using a serine hydroxyl group as a nucleophile in the active site. The pancreas is where chymotrypsin is largely made. To stop its protease activity from dissolving the pancreas, it is created as the inactive zymogen chymotrypsinogen rather than the active version. A different enzyme known as trypsin changes it into its active form when it is secreted into the lumen of the small intestine.

Trypsin is the primary enzyme that breaks down chymotrypsin, which is also known as chymotrypsinogen. Active enzymes can occasionally even cleave the incoming inactive form of themselves.

To learn more about chymotrypsin please click on below link

https://brainly.com/question/13638833

#SPJ4

Absence of gravity in pace or any actual work is answerable for 30% mortality in men and 60% of the demise rate in ladies. It is the main source of redistribution of bodily fluid .

A portion of the day to day routine exercises which lead to a stationary way of life are perusing, sitting, staring at the TV, utilization of the PC and playing computer games. Illnesses whose chance variable builds because of an absence of activity system are kidney stones, liver issues, hypertension, diabetes, colon malignant growth, despondency, cardiovascular infection, uneasiness, corpulence, osteoporosis and thickening of blood.

Very much like the way that exercises give various positive advantages to your body, absence of activity additionally makes many adverse consequences. At the point when you don't work-out consistently, it can influence your temperament, muscles, bones, heart, joints, levels of glucose and lungs. Absence of exercises will make your bones exceptionally frail, aggregate overabundance body weight, causes glitch of organs or disappointment and heart issues. It would likewise make a few persistent ailments, like hypertension and diabetes.

To know more about bodily fluids, visit here:

https://brainly.com/question/2869075

#SPJ4

(Complete question) is:

The lack of gravity in pace cause a redistribution of bodily fluid. Describe what happen to the body due to this change.

The component released from the active site of an enzyme during a chemical reaction is known as: a product.

Enzymes can facilitate biochemical reactions in our bodies by acting as a catalyst. With enzyme helps, the reactions inside our bodies happen more quickly and more efficiently, as they lower the activation energy of those reactions.

The reactants (known as substrates) bind with an enzyme's active site. This substance breaks the reactants into a new product. The enzyme will release the product when it is ready. So, the correct answer to the question is: product.

Learn more about enzymes here https://brainly.com/question/29523311

#SPJ4

    Answer: Photosynthesis generates chemical form of energy for use by the plant. It is basically a process by which plants convert light energy into chemical energy.

   Explanation: Plants absorb water (H2O) and carbon dioxide (CO2) from the soil and atmosphere during photosynthesis. After this, water is oxidized, which means it loses electrons, while carbon dioxide is reduced, which means it receives electrons, inside the plant cell. Water is converted into oxygen and carbon dioxide into glucose as a result. After storing energy within the glucose molecules, the plant releases the oxygen back into the atmosphere. Chloroplasts are tiny organelles that are found inside plant cells and are used to store solar energy. Chlorophyll, a light-absorbing pigment found in the thylakoid membranes of the chloroplast, is what gives plants their green hue. Chlorophyll absorbs energy from blue and red- light waves during photosynthesis and reflects green light waves, giving the appearance of a green- colored plant.

   For more information regarding photosynthesis:

https://brainly.com/question/19160081

https://brainly.com/question/26568636

As a result, the solution's freezing point is between 1.86 and 1.86 Celsius.

The molal freezing point depression constant KF and the solute's molality, m, are used to calculate the freezing point depression, which is given by T = KFm. Rearranging results in: Molecules of a solute are equal to (m) x (kg of solvent), where kg of solvent is the mass of lauric acid, the solvent in the mixture.

The Process Of Water Freezing

When it approaches zero degrees, it begins to freeze. Ice crystals begin to develop from water molecules in the first stage. The size of the ice crystals increases in the second stage.

Learn more about Freezing Point.

https://brainly.com/question/9530198

#SPJ4

The solution's freezing point is between 1.86 and 1.86°C.

The molal freezing point depression constant KF and the solute's molality, m, are used to calculate the freezing point depression, which is given by T = KFm. Rearranging results in: Molecules of a solute are equal to (m) x (kg of solvent), where kg of solvent is the mass of  acid, the solvent in the mixture. This provides the solute's moles.

Assuming that there is no association or dissociation of the solute in solution.

ΔTb=kb×m

T′b−Tb=0.512×0.575

T′b−100=0.512×0.575

T′b=0.2944+100=100.2944

Boiling point of that solution will be 100.2944℃.

ΔT f=kf×m

T f−T′f=1.86×0.575

0−T′f=1.86×0.575

T′f=−1.0695

Freezing point of that solution will be -1.0695℃

Learn more about Freezing Point here:

brainly.com/question/9530198

#SPJ4

The most stable Lewis structures of cyanamide (H2NCN) and its structural isomer (HNCNH) are not correct.

This is because the two molecules have different molecular structures, which means they have different electron configurations and therefore different Lewis structures.

The Lewis structure of cyanamide (H2NCN) is characterized by two double bonds, one between the nitrogen and carbon atoms, and the other between the nitrogen and hydrogen atoms. This structure is highly stable and is due to the fact that the nitrogen atom has a full octet of electrons.

The Lewis structure of the structural isomer (HNCNH) is characterized by a single bond between the nitrogen and hydrogen atoms, and a triple bond between the nitrogen and carbon atoms. This structure is less stable than the cyanamide Lewis structure because it does not have a full octet of electrons.

In conclusion, the statement that the most stable Lewis structures of cyanamide (H2NCN) and its structural isomer (HNCNH) are not correct is false. The two molecules have different molecular structures and different Lewis structures, with cyanamide having a more stable structure.

Learn more about structural isomer at : https://brainly.com/question/13422357

#SPJ4

When 6.4 g of calcium carbonate is put to enough hydrogen chloride in a lab, 2.38 g CO2 mass of carbon dioxide would be collected.

Calcium carbonate: Is it bad for your health?

Effects on People Human mucous membranes, including those in the eyes, nose, and skin, are physically irritated by calcium carbonate dust. When calcium carbonate dust comes in contact with the eyes, it causes redness, discomfort, and inflammation of the eyelids, whereas when it comes in touch with the skin, it causes mild to moderate localized irritation.

What negative effects does calcium carbonate have?

High blood calcium levels can cause swelling, quick weight gain, or symptoms including nausea, vomiting, constipation, increased thirst or urination, muscle weakness, bone pain, disorientation, lack of energy, or fatigue.

Briefing:

CaCO3 + HCl → CaCl2 + H2CO3 → CaCl2 + H2O + CO2  ( carbonic acid forms CO2 and H2O immediately)

CaCO3 + HCl → CaCl2 + H2O + CO2

Balance:

CaCO3 + 2HCl → CaCl2 + H2O + CO2

Now you have a balanced equation so that you can find the proper mole ratio.

Begin with the given:

6.4g of CaCO3 x 1 mole CaCO3/100.09 g CaCO3 x 1 mole CO2/1 mole CaCO3 x 44.01g CO2/1 mole CO2 = 2.81 g CO2

This is the theoretical yield.

Actual Yield = Theoretical yield x % Yield

AY = 2.81g CO2 x .0.85 =2.38 g CO2

To know more about calcium carbonate visit:

https://brainly.com/question/13565765

#SPJ1

The Calvin cycle by filling in the missing molecules Ribulose 1,5-bisphosphate (5C) (RuBP)

The Calvin cycle, also known as the light-independent reactions, bio synthetic phase, dark reactions, or photosynthetic carbon reduction (PCR) cycle[1] of photosynthesis, is a sequence of chemical processes that transform carbon dioxide and hydrogen-carrier molecules into glucose. In all photosynthetic eukaryotes as well as many photosynthetic bacteria, the Calvin cycle is present. The stroma, the area of a chloroplast that is fluid-filled and not covered by thylakoid membranes, is where these reactions take place in plants. These reactions take the byproducts of light-dependent reactions (ATP and NADPH), and put them through additional chemical pathways. To create sugars that the plant can utilise, the Calvin cycle combines the reducing power of NADPH and the chemical energy of ATP. These substrates are utilised in a sequence of reduction-oxidation processes that result in the production of sugars.

Learn more about Calvin cycle here

https://brainly.com/question/13477893

#SPJ4

In acid-catalyzed hydrolysis, a protic acid (H₂SO₄) is used to catalyze the cleavage of a bond via a nucleophilic substitution reaction, with the addition of water.

In organic chemistry, acid hydrolysis can be described as a hydrolysis process in which a protic acid is utilized to catalyze the cleavage of a chemical bond through a nucleophilic substitution reaction, with the addition of water (H₂O).

For example, in the conversion of cellulose to glucose. In the case of esters and amides, it is an acid-catalyzed nucleophilic acyl substitution reaction.

In nucleophilic addition reactions, such as in the acid-catalyzed hydrolysis of nitriles into amides. Acid hydrolysis does not refer to the acid-catalyzed addition of water to double or triple bonds by electrophilic addition.

Acid hydrolysis is used to form monosaccharides with the help of acids, such as HCl, HNO₃, HCOOH, H₂SO₄, etc.

Acidic hydrolysis of an ester gives the product of a carboxylic acid and an alcohol.

Learn more about Acid-catalyzed hydrolysis, here:

https://brainly.com/question/25735055

#SPJ4

Answer:

The electron configuration of magnesium (Mg) in its neutral state is 1s2 2s2 2p6 3s2. When magnesium loses two electrons to form a magnesium ion with a 2+ charge (Mg2+), its electron configuration becomes 1s2 2s2. This means that the 3s2 subshell is now empty, and the magnesium ion has a full outer shell with a total of two electrons. The electron configuration of Mg2+ can also be written as [Ne] 3s2.

The water that is shot up into the air by the fountain takes a parabolic path while coming down is the best example of parabola.

Parabola

A parabola is a plane curve which is mirror-symmetrical and is approximately U-shaped. It fits several superficially different mathematical descriptions, which can all be proved to define exactly the same curves.

Parabolas have the property that, if they are made of material that reflects light, then light that travels parallel to the axis of symmetry of a parabola and strikes its concave side is reflected to its focus, regardless of where on the parabola the reflection occurs. Conversely, light that originates from a point source at the focus is reflected into a parallel  beam, leaving the parabola parallel to the axis of symmetry.

Learn more about parabola here :-

https://brainly.com/question/21685473

#SPJ4

Since hydrogen peroxide is both acidic and basic, it serves as both an oxidizing and a reducing agent.

To learn more about hydrogen peroxide refer to:

https://brainly.com/question/25566753

#SPJ1

Answer:

Explanation:

The main difference between a catalyst and a promoter is the mechanism by which they affect a chemical reaction. A catalyst speeds up a chemical reaction by providing an alternative pathway for the reactants to follow that has a lower activation energy. A promoter, on the other hand, influences the rate of a chemical reaction by changing the adsorption and desorption of reactants on the surface of a catalyst.

Another difference between a catalyst and a promoter is the extent of their effect on the reaction rate. A catalyst generally has a much greater impact on the rate of a chemical reaction than a promoter. For example, a catalyst might increase the rate of a reaction by a factor of 10^6 or more, while a promoter might only increase the rate by a factor of 10 or 100.

Examples:

Platinum is a common catalyst used in the process of catalytic converter, which is used to reduce the emissions of harmful gases from automobile exhaust.

Alumina (aluminum oxide) is often used as a promoter in the production of synthetic fuels from coal or natural gas. The alumina helps to increase the rate at which the reactants are converted to the desired product, resulting in a more efficient and cost-effective process.

The properties of copper are:

1. Color is an extensive property of copper because it is determined by the amount of copper present. For example, when a large amount of copper is present, the color of the material will be a darker shade.

2. Melting point is an intensive property of copper because it is determined by the chemical structure of the material and is not affected by the amount of copper present. The melting point of copper is 1084.62°C regardless of the amount of copper present.

Extensive properties are physical characteristics of a substance that depend on the amount of the material present. Examples of extensive properties include mass, volume, and length.

Intensive properties are physical characteristics of a substance that are independent of the amount of the material present. Examples of intensive properties include density, boiling point, and melting point.

Learn more about cooper properties:

https://brainly.com/question/16448509

#SPJ4

Answer:

The major potential environmental impacts associated with mining and associated mineral processing operations are related to erosion-prone landscapes, soil and water quality, and air quality.

Explanation:

Plants were native to the mining site and making sure the soil is healthy are the examples of environmental concerns taking into account by a mining company when it created a reclamation plan for a mine site.

Land use may change as a result of mine exploration, construction, operation, and maintenance.

It may also have detrimental effects on the environment, such as deforestation, erosion, contamination of nearby streams and wetlands, alteration of soil profiles, increased noise levels, and dust.

Mining is a naturally invasive operation that can alter the landscape over a much wider region than the actual mining site.

Therefore, years after a mine closes, the impacts of this harm can still be felt, adding to greenhouse gas emissions, causing flora and fauna to die, and eroding the land and environment.

Learn more about mining, here:

https://brainly.com/question/26763742

#SPJ2

As the number of bonds between two carbon atoms increases, the bond length decreases. (Option C)

In molecular geometry, bond length refers to the average distance between nuclei of two bonded atoms in a molecule. It is defined as a transferable property of a bond between atoms of fixed types, relatively independent of the rest of the molecule. The length of the bond is determined by the number of bonded electrons i.e., the bond order. The higher the bond order, the stronger the pull between the two atoms and the shorter the bond length. Hence, as the number of bonds increases between two carbon atoms, atoms in bonding come closer to each other and bond length decreases.

Note: The question is incomplete as it is missing options which are a) number of electrons between the carbon atoms b) bond energy c) bond length d) all of these

Learn more about Bond length:

https://brainly.com/question/16012396

#SPJ4

The mass of [tex]Al_{2} S_{3}[/tex] produced is 15.616 grams.

The reaction taking place is as follows:

[tex]2Al+ 3S[/tex] →[tex]Al_{2} S_{3} (s)[/tex]

Moles of Al = mass/molar mass = 10.0g/27.0g/mol

= 0.370 mol

Moles of S = mass/molar mass = 15.0g/(32.065g/mol)

= 0.468 mol

Al and S reacts in the molar ratio of 2:3.

2 moles of Al reacts with 3 moles of S

0.370 moles of Al will react with S = (3/2)*0.370mol

= 0.555 mol

Similarly, 0.468 moles of S will react with Al = 2/3 *0.468mol

= 0.312 mol

Thus, Al is in excess and S is the limiting reactant (some of Al will be left over ,S will completely react)

So, moles of [tex]Al_{2} S_{3}[/tex] produced=1/3*0.312 mol of S

= 0.104 mol

Mass of [tex]Al_{2} S_{3}[/tex] produced = moles*molar mass of [tex]Al_{2} S_{3}[/tex]

= 0.104mol*150.158g/mol

= 15.616 grams

To learn more about limiting reactants, here

https://brainly.com/question/14225536

#SPJ4

The maximum mass of calcium oxide that can be obtained from by heating 25 tonnes of calcium carbonate is 12700590 g

We'll begin by converting 25 tons to grams. Details below:

1 ton = 907185 g

Therefore,

25 tons = 25 × 907185

25 tons = 22679625 g

Finally, we shall determine the maximum mass of calcium oxide, CaO produced from the reaction. This is shown below

CaCO₃ -> CaO + CO₂

From the balanced equation above,

100 g of CaCO₃ reacted to produce 56 g of CaO

Therefore,

22679625 g of CaCO₃ will react to produce = (22679625 × 56) / 100 = 12700590 g of CaO

Thus, the maximum mass of calcium oxide, CaO obtained is 12700590 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

The amount of KCl that will remain in solution at 20° C depends on the concentration of the solution and the solubility of KCl at that temperature.

Solubility is the ability of a substance to dissolve in a solvent, such as water or alcohol. It is affected by temperature, pressure, and the presence of other substances. Solubility is a physical property of a substance, and it is an important factor in determining the dissolution rate of a chemical in a given solvent. In general, solubility increases as temperature increases, and solubility decreases as pressure increases. Some substances, such as salt, are more soluble in hot water than in cold water. Other substances, such as sugar, are more soluble in cold water than in hot water. Solubility is also affected by the presence of other substances, such as salts, acids, and bases.
The solubility of KCl at 20° C is approximately 55.8 grams per 100 milliliters of water. Therefore, if the solution has a concentration of 1 gram per 100 milliliters of water, then 55.8 grams of KCl will remain in the solution at 20° C.
To know more about solubility click-
https://brainly.com/question/23946616
#SPJ4