Speed= 60 m/s
for converting m/s to km/h =multiply with 5/18
for converting km/h to m/s= multiply with 18/5
so, 60 × ( 18/50) = 216 km/h
The wheel of bicycle has a radius of 25cm.what will be the magnitude of the angular displacemant in radian and revolution respectively,when the wheel has rolled a distance of 350cm on straight level road?
density differences in different materials are able to change the _____________ of a wave.
Answer:
Wavelength and speed both depend on the material of the medium.
Explanation:
Let [tex]f[/tex] denote the frequency of a wave. Let [tex]v[/tex] denote the speed of that wave in a given medium. Let [tex]\lambda[/tex] denote the wavelength of that wave in this medium.
The frequency [tex]f[/tex] of a wave stays the same regardless of the material of the media. However, the speed [tex]v[/tex] of a wave indeed depends on the material of the medium (density of the medium, etc.)
[tex]\lambda = v / f[/tex] and [tex]f[/tex] stays the same regardless of the medium. Thus, the wavelength [tex]\lambda[/tex] of this wave in a given medium would be proportional to the speed [tex]v[/tex] in that medium.
For example, the speed of sound in materials with a larger density (e.g., water) is generally larger than that in materials with lower density (e.g., air.)
When a sound wave travels from air into water, the frequency [tex]f[/tex] of this wave would stay the same. However, since the speed [tex]v[/tex] of the wave would increase, the wavelength [tex]\lambda[/tex] of this wave would also increase.
What two things must be true about a sample in order to date it via radiocarbon dating by evaluating the decay of carbon-14
A. It must be inorganic and be at least 50,000 years old
B. It must be a marine animal and must have died recently
C. It must be organic and less than 50,000 years old
D. It must be a land animal and must have died recently
Carbon -14 is a dating method that is applicable to only samples of organic origin which are less than 50,000 years old.
When living things contain carbon- 14. Carbon - 14 is a radioactive isotope of carbon that decays by beta emission. As long as a plant or animal is alive, there is a balance between its intake and output of carbon -14.
However, when the plant or animal dies, this carbon - 14 begins to decay. The half life of carbon - 14 is 5700 years and it can be used to measure the age of materials or organic origin that are less than 50,000 years old.
Learn more: https://brainly.com/question/14281129
A car travelled at a speed of 60 km/hr for thrice as long as it travelled at a speed of 40 km/hr. If the total distance it covered was 440 km, for how long did it travel at a speed of 60 km/hr
Answer:
it traveled 180km
Explanation:
Will give brainliest!
Answer:
chemical symbol
Explanation:
Calculate the weight of a 2kg chicken on earth. .. (use the formulas)
Answer:
weight =m x g =2kg × 10m/s 2 = 20N
Formulas:
weight = m × gravity
=unit for weight is newtons
Mass=weight ÷ gravity
= unit for mass is kilograms
Gravity=weight ÷ mass
=unit for gravity is 10m/sec 2
Column A
Column B
1.
Frequency
a. Ohm
2.
Amplitude for sound
b. Decibel
3
Force
C. Joule
4
Distance
d. Newton
5.
Current
e. Amperdiet
6.
Resistance
f. Meter
7.
Voltage
g. Hertz
8.
Energy
h. Volt
Answer:its 3 and 5
Explanation:
j
How to convert acceleration to velocity.
You can't. Velocity and acceleration measure two different things, so their units are incompatible. It's like asking, "How many meters does this book weigh?"
Maybe you mean "find" acceleration using given velocities, or a velocity function?
Where does the energy released in a nuclear decay reaction come from
A. Electrons
B. Chemical bonds
C. Positrons
D. The binding energy of the nucleus
A 2 kg mass starts from rest and slides down an inclined plane 4 m long in 1 second. What net force is acting on the mass along the incline *.
The net force acting on the mass along the incline is equal to 16 Newton.
Given the following data:
Mass = 2 kgDistance = 4 metersTime = 1 secondsTo determine the net force acting on the mass along the incline:
First of all, we would find the acceleration of the mass by using the second equation of motion:
[tex]S = ut+ \frac{1}{2} at^2\\\\4 = 0(1) + \frac{1}{2} a(1)^2\\\\4=\frac{a}{2}\\\\a=2\times 4[/tex]
Acceleration, a = 8 [tex]m/s^2[/tex]
For the net force, we would apply Newton's Second Law of Motion:
[tex]F_{net} = mass \times acceleration\\\\F_{net} =2 \times 8[/tex]
Net force = 16 Newton.
Read more here: https://brainly.com/question/20037336
During a collision, a 63.9-kilogram driver of a car moving at 24 m/s is brought to rest by an inflating airbag in 1.2 seconds. What is the magnitude of the force exerted on the driver by the airbag?
Hi there!
We can use impulse for this situation:
I = Δp = mΔv
Impulse = Force × time, so:
I = 63.9(24) = 1533.6 Ns
Find force by dividing by time:
I/t = 1533.6/1.2 = 1278 N
Gold density = 19.30,
Silver density = 10.49,
Lead density = 11.34.
They have the same mass but are made of different metals. Each one is lowered into a beaker of water. Use the data above to decide which one will cause the biggest rise in water level.
A) Gold
B) Silver
C) Lead
D) All will cause the same rise in water level
Density of water=1g/cm^3
Now all metals has greater mass in comparison to water.
Higher the mass higher the rise[tex]\\ \sf\longmapsto Density=\dfrac{Mass}{Volume}[/tex]
[tex]\\ \sf\longmapsto Density\propto Mass[/tex]
Higher the density higher the massGold has higher mass hence it will cause the biggest rise.
Option A
Silver will cause biggest rise in water
What is density ?Density of an object is a measure of its mass per unit volume.
density = mass / volume
since all have same mass , so metal which have higher volume will cause the biggest rise in water level .
since , density is inversely proportional to volume , hence material having low density will have higher volume
hence , silver will cause biggest rise in water
correct option B) Silver
learn more about density
https://brainly.com/question/6329108?referrer=searchResults
#SPJ2
Hello guys! Can u please help me with physics. I translated it in English. Can yall help me please how much u can!!
A body 60 m above the ground shall be thrown vertically upwards at an initial speed of 20 m / s. Air resistance can be ignored!
1. How high will the body fly from the point of ejection?
2. What is the maximum height it will reach above the ground?
3. How long does it take for the body to reach its highest point from the moment of expulsion?
4. After how long after the expulsion will the body fall to the ground?
5. What is the speed of the body at the moment of falling to the ground?
1. Since the body is thrown vertically upward, the only force acting on it as it rises and falls is gravity, which causes a constant downward acceleration with magnitude g = 9.8 m/s². Because this acceleration is constant, we can use the formula
v² - u² = 2a ∆x
where
u = initial speed
v = final speed
a = acceleration
∆x = displacement
At its maximum height, some distance y above the point where the body is launched, the body has zero velocity, so
0² - (20 m/s)² = 2 (-9.8 m/s²) y
Solve for y :
y = (20 m/s)² / (2 (9.8 m/s²)) ≈ 20.4 m
2. Relative to the ground, the body's maximum height is 60 m + 20.4 m ≈ 80.4 m.
3. At any time t ≥ 0, the body's vertical velocity is given by
v = 20 m/s - gt
At the highest point, we have
0 = 20 m/s - (9.8 m/s²) t
and solving for t gives
t = (20 m/s) / (9.8 m/s²) ≈ 2.04 s
4. The body's height y above the ground at any time t ≥ 0 is given by
y = 60 m + (20 m/s) t - 1/2 gt²
Solve for t when y = 0 :
0 = 60 m + (20 m/s) t - 1/2 (9.8 m/s²) t²
Using the quadratic formula,
t = (-b + √(b² - 4ac)) / (2a)
(and omitting the negative root, which gives a negative solution) where a = -1/2 (9.8 m/s²), b = 20 m/s, and c = 60 m. You should end up with
t ≈ 6.09 s
5. At the time found in (4), the body's velocity is
v = 20 m/s - g (6.09 s) ≈ -39.7 m/s
Speed is the magnitude of velocity, so the speed in question is 39.7 m/s.
Help ! will give Brainliest to who Answer first.
Acceleration is a ______ quantity.
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct statement is ~
Acceleration is a vector quantity.
Answer:
Acceleration is a vector quantity.
Which two events are part of the rock cycle?
A. Existing rock is melted aboveground and erodes.
B. Existing rock is weathered by water and erodes.
C. Solid rock is heated under high pressure and melts.
D. Solid ice is warmed by sunlight and evaporates.
Answer:
Explanation:
which type of telescope is best used to detect quasars?
Answer:Gamma-Ray Telescopes
Explanation:
Gamma-Ray Telescopes are used for detecting the gamma-ray part of the Electromagnetic Spectrum. These can detect very high-energy gamma-rays from radio galaxies, gamma-ray bursts from stars, supernovae events, and Quasars.
Radio Waves Telescope
The Kentucky Derby is one of the most exciting horse races run every year. In 1973, the horse Secretariat set a record that still stands. This 500-kg horse ran the 2000-m track in 120 s. What was Secretariat’s average kinetic energy? (1 kJ = 1000 J)
Need answers with explanaitions please
A. 4.2 kJ
B. 8.3 kJ
C. 69.0 kJ
D. 139.0 kJ
Answer:
C.69 kJ
Explanation:
kinetic energy
[tex] = 1 \div 2mv {}^{2} [/tex]
Which type of solid is dry ice (solid carbon dioxide)? ionic atomic molecular none of the above.
Answer: molecular solid
Explanation:
which jovian planet should have the most extreme seasonal changes?
Answer:
Uranus
Explanation:
brainliest please?
PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!
Walter has a paper due on a novel that he has not read. He knows that his teacher will expect detailed references to the novel in his paper. He is thinking that he can listen to it while he is lifting weights and multi-task. What is the BEST response to Walter?
A.
He does not really need to concentrate on exercise, so it is fine.
B.
He would be better off focusing on his workout and then turning to the novel.
C.
If he is doing a type of exercise that allows him to stop and take notes, it is fine.
D.
Doing as many tasks as possible is generally a good idea and promotes efficiency.
PLEASE NO LINKS
Answer:
I'm no expert, but multitasking is a no bueno. Because multitasking reduces your efficiency and performance because your brain can only focus on one thing at a time. When you try to do two things at once, your brain lacks the capacity to perform both tasks successfully.
Therefore I would choose A, considering he could easily workout another time, whilst the test is a one time thing. He can't redo the test, but he can workout again. So my answer is A.
If he HAS to workout and study at the same time, then C would be appropriate.
I hope this helps!
How is AU different from a solar mass?
A. An AU is the distance from the black hole at the center of the galaxy to the closest planet, and solar mass represents a measurement equal to the mass of a black hole's quasar.
B. An AU is the smallest unit of measurement in quantum mechanics, and a solar mass is the largest unit of measurement in astronomy.
C. An AU is the distance from the event horizon to the singularity of a black hole, and solar mass is the distance between the two closest black holes in a galaxy.
D. An AU is the distance from the earth to the sun, and solar mass represents a measurement equal to the mass of our sun.
AU is the distance from the earth to the sun, and solar mass represents a measurement equal to the mass of our sun.
The units applied in astronomy is quite different from the units applied in daily life. The unit called astronomical units (AU) describes the distance from the earth to the sun. The unit solar mass represents the mass of the sun and is taken to be equal to 1.989 x 10^30 kilograms.
Therefore, the difference between the AU and solar mass is that; AU is the distance from the earth to the sun, and solar mass represents a measurement equal to the mass of our sun.
Learn more: https://brainly.com/question/8646601
what are the slight fluctuations seen in maps of the cosmic background radiation?
The beginning of the formation of galaxies and clusters of galaxies are the slight fluctuations seen in maps of the cosmic background radiation. So, the correct option is C.
What is Cosmic background radiation?The cosmic background radiation is defined as the microwave radiation that fills all of space which is a remnant that provides an important source of data on the early universe. With a standard optical telescope, the background space between stars and galaxies is almost completely dark.
It is also called the Cosmic Microwave Background (CMB) or electromagnetic radiation filling the universe which is a residual effect of the Big Bang that happened 13.8 billion years ago. The beginning of the formation of galaxies and clusters of galaxies are the slight fluctuations seen in maps of the cosmic background radiation.
Therefore, the correct option is C.
Learn more about Cosmic Background radiation, here:
https://brainly.com/question/1310278
#SPJ6
Your question is incomplete, most probably the complete question is:
What are the slight fluctuations seen in maps of the cosmic background radiation?
a. uncertainties in the map
b. variations in the instrument's sensitivity
c. the beginning of the formation of galaxies and clusters of galaxies
d. dark matter
e. none of the above
an acorn falls from a tree. ignoring air resistance, what forces are on the acorn while it’s falling?
Answer: gravity
Explanation:
What are 4 ways you can determine if a website is reliable?
Answer:
Identify the name of the individual, group or institution that created the website. A reliable website should clearly state the name of its creator. Generally, websites created by government institutions (.gov) and educational institutions (.edu) are considered more reliable.
Two electrons are separated by one cm. What is the ratio of the electric force to the gravitational force between them? (me = 9. 11 ´ 10-31 kg, ke = 8. 99 ´ 109 N×m2 /C2 , G = 6. 67 ´ 10-11 N×m2 /kg2 , and e = 1. 6 ´ 10-19 C) a. 2. 3 ´ 102 b. 1. 3 ´ 1020 c. 3. 1 ´ 1022 d. 4. 2 ´ 1042.
The ratio of the electric force to the gravitational force between the two electrons is [tex]4.2 \times 10^{42}[/tex].
The given parameters;
Mass of the electron, [tex]m_e[/tex]= 9.11 x 10⁻¹¹ kgCoulomb's constant, k = 8.99 x 10⁹ Nm²/C²Gravitational constant, G = 6.67 x 10⁻¹¹ Nm²/kg²Charge of electron, q = 1.6 x 10⁻¹⁹ CDistance between the two electrons, r = 1 cmThe electrostatic force between the two electrons is calculated as follows;
[tex]F_c = \frac{kq^2}{r^2} \\\\[/tex]
The gravitational force between the two electrons is calculated as follows;
[tex]F_g = \frac{Gm_e^2}{r^2}[/tex]
The ratio of the electric force to the gravitational force between the two electrons is calculated as follows;
[tex]\frac{F_c}{F_g} = \frac{kq^2}{r^2} \times \frac{1}{\frac{Gm^2}{r^2} } \\\\\frac{F_c}{F_g} = \frac{kq^2}{r^2} \times \frac{r^2}{Gm^2} \\\\\frac{F_c}{F_g} = \frac{kq^2}{Gm^2}\\\\[/tex]
[tex]\frac{F_c}{F_g} = \frac{(8.99 \times 10^9) \times (1.6 \times 10^{-19}))^2}{(6.67 \times 10^{-11} ) \times (9.11 \times 10^{-31})^2} \\\\\frac{F_c}{F_g} = 4.2 \times 10^{42}[/tex]
Thus, the ratio of the electric force to the gravitational force between the two electrons is [tex]4.2 \times 10^{42}[/tex].
Learn more about electrostatic force here: https://brainly.com/question/16796365
Definition of Speed?
speed- the rate something moves or operates
Can I have brainlist please
The Speed are distance covered by the object in unit time.The S.I unot of speed is metre per second written as m/sec.It is a scalar quantity.
Speed=Distance/TimeAverage speed=Total distance covered/Total time takenThe speed is measured in metres per second ( ms- ¹ )
Where denoted by s
The distance travelled is measured in metres (m) and denoted by d
t is the amount of time spent and measured in seconds s
Explanation:There are Two Types of Speed are :Uniform Speed: When the distance travelled by a body is equal in equal interval of time then the speed is uniform. Non-uniform Speed: When the distance travelled by a body is unequal in an equal interval of time then the speed is known as non- uniform speed.There are four different forms of speed are : If an object travels the same distance in the same amount of time, it is said to be moving at a uniform speed.When an object travels a different distance at equal intervals of time, it is said to be moving at variable speed.The Average speed is the average speed determined by the ratio of the total distance travelled by an object to the entire amount of time it took to travel that distance.The speed of an object at any given moment when it is travelling at a variable speed is referred to as the object's instantaneous speed.Know more:The Discover of the Speed is Galileo Who was the Discover the speed as the distance covered per unit of time.Speed is measured as the ratio of distance to the time in which the distance was coveredThe dimensional formula of speed is:M ⁰ L ¹ T -¹ The measurement of speed in vehicles, speedometers are used. To measure the distance covered odometers are used. The Speed can also be calculated with the help of a graph. The Distance-time graph helps in understanding the speed of an object.An instrument to measure immediate speed is a speedometer.186,282 miles per second is another way to write the speed of light.In dry air, the speed of sound is 343.2 meters per second.Which of these is a likely impact of the stronger than normal trade winds on the eastern Pacific ocean?
Warm surface water builds up, causing lower than average temperature.
Warm surface water builds up, causing higher than average temperature.
Warm surface water is reduced, causing colder conditions than normal.
Warm surface water is reduced, causing hotter conditions than normal.
Just say A B C or D which one
Answer:
b i think
Explanation:
hope this helps
Answer: A B C or D which one
Explanation:
1. When a 50,000 kg rocket blasts off there is a large force that acts on the rocket at the moment
of take off. In 0.137 seconds, the rocket suddenly has traveled 4.2 meters. What force from
the rocket engines caused the acceleration? (Hint: first find acceleration.)
Hi there!
We can begin by calculating the acceleration using the kinematic equation:
d = vit + 1/2at²
Since the rocket starts from rest, we can rewrite this as:
d = 1/2at²
Plug in given values:
4.2 = 1/2a(0.137²) ⇒ a = 447.55 m/s²
Now, we can use Newton's Second Law to find the appropriate force:
∑F = m · a
∑F = 50,000 · 447.55 = 22,377,500 N
. Which of the following are forces that push upward on an indoor skydiver? Choose all that apply. *
gravity
acceleration
air resistance
lift
WILL GIVE BRAINLIST
The forces that push upward on an indoor skydiver are lift force and air resistance.
The forces that act on a skydiver moving downwards includes, gravity due to his weight, air resistance and lift force.
The downward forces on the indoor skydiver include the following;
gravity due to its weightdownward force due its accelerationThe upward force on the indoor skydiver include the following;
lift forceair resistanceThus, we can conclude that the forces that push upward on an indoor skydiver are lift force and air resistance.
Learn more here:https://brainly.com/question/8947470
when light enters water, it bends. what does the amount of bending depend on?
Answer:
the change of speed!
Explanation:
if light speeds up or slow down more it bend more