Answer:
its A reduces stress :)))
Explanation:
According to Le Chatelier’s principle, a system in chemical equilibrium responds to stress by shifting the equilibrium in a direction that reduces the stress.
What is Le Chatelier’s principle ?Le Chatelier’s principle states that when a chemical equilibrium become imbalance by any change such as change in concentration, temperature, pressure etc. the system will reduces this stress by creating a new equilibrium state.
By this principle, when temperature increases for an endothermic system, forward reaction will takes place more since the temperature is absorbed there.
Similarly, when the concentration of any reactant increases, the reaction will turn to that direction in which that reactant is consumed more. If any loss the volume, then the equilibrium will shifts to that direction in which the that substance is produced.
Hence, the system will somehow manage the imbalance by reducing the stress occurred.
To find more on Le Chatelier’s principle,refer here:
https://brainly.com/question/2001993
#SPJ6
Can someone help me please!(I will mark you brainliest)
Answer:
ok Look at it and tell me if you think its correct :}
What would the formula be for Molybdenum V Carbonate?
Answer:
CMoO3 - PubChem.
Explanation:
EMERGENCY!!! Can someone tell me the answer plz plz I’ll give you brainlist and points plz This is my final test No wrong answers
Answer:
A. the valence electrons
Explanation:
Answer:
The valence electrons
Explanation:
The valence electrons determine an element's properties because chemical properties of each element are determined by the element's electronic configuration and PARTICULARLY by its outermost valence electrons. I hope it helps!
~Good luck
what unit is a wave velocity measured in
Answer:
radians
Explanation:
Answer:
Meters per second.
Explanation:
Ap3x approved
Convection currents in Earth's mantle are caused by the rise of hot material rising towards the crust, becoming cooler and sinking back down. This process occurs repeatedly, causing the currents to constantly flow. The movement of the currents plays a factor in the movement of the mantle.
Answer:
True or False
Answer - True
Explanation:
The mantle convection clearly describes how the mantle moves, transferring heat from the white-hot core to the lithosphere. The mantle is usually being heated below and the cooling happens above and the general temperature of the area gets dropped over a long period of time.
Hot buoyant Magma is being transferred through convection currents, to the lithosphere at the plate boundaries and hot spots. Also, convection current moves cooler materials from the crust to the interior of the earth through a process that is widely known as subduction.
What is the name of the warm phase associated with melting ice and higher sea level? PLSSSSSSS ILL GIVE 5 STARS PLSSS JUST PLS HELP ME ITS FOR MY MIDTERM REVIEW ;-; ITS DUE TODAY!!! PLSSS
Global Warming
Explanation:
The melting of the polar ice caps due to mostly negative human interactions with the environment.
what is the structural formula of propene
Explanation:
Structural formula of propene
H₃C–CH₂=CHmolecular formula = C₃H₆
molecular mass = 12×3+1×6 = 36+6 = 42
no. of double bond = 1
Which of the following methods can be used to completely separate a solution containing alcohol and water?
A) Evaporation and distillation
B) Filtration
C)Floatation or centrifuge
D) Magnetism
What are the characteristics for mechanical waves
What happens when you put an ice-pop outside? This is for the people who don’t know
Answer:
It melts
Explanation:
Answer:
It melts?
Explanation:
Which element in Group 18 of the Periodic Table has the highest lonization energy?
all the elements in group 18 are Nobel gases or inert gases . all the elements such as neon , helium, argon etc. ,their outermost shell is completely filled . The noble gases have the largest ionization energies, reflecting their chemical inertness
What occurs during replication?
O A protein is formed from information in messenger RNA.
A messenger RNA strand is made from DNA.
O A copy of DNA is made from existing DNA.
A copy of DNA is transferred from one organism to another.
Answer:
A
Explanation:
Hopefully this helps
Answer:
A copy of DNA is made from existing DNA.
Explanation:
Just did the quiz
HELP ASAP
1. a hurricane destroyed an entire city, what category would it most likely be?
a Category 4 or 5
b Category X or Y
c Category 1 or 2
d Category A or B
2. What happens immediately after a hurricane makes landfall?
a It starts hailing.
b Its winds pick up speed.
c It gets stronger.
d It gets weaker.
Answer:
1. category 4 or 5
2. it gets weaker
Classify each of the following elements as
a metal, a nonmetal, or a metalloid:
boron, carbon, aluminum, and silicon.
The non-metals are boron and carbon. The metal is aluminum and the metalloid is silicon.
Explanation:
non-metal = boron, carbon
metal = aluminum
metalloid = silicon
Non-metal = boron, carbon
Metal = aluminum
Metalloid = silicon
What is metal?A solid material which is lustrous, hard, shiny, malleable, and sonorous with good electrical and thermal conductivity.
Metal is an element which is typically hard, shiny, fusible, malleable, and ductile, with good electrical and thermal conductivity.
A nonmetal is an element that does not have the properties of a metal.
A metalloid is an element having intermediate properties of both metals and nonmetals.
Hence,
Non-metal = boron, carbon
Metal = aluminum
Metalloid = silicon
Learn more about metals here:
https://brainly.com/question/16759172
#SPJ2
Which of the following are common decomposers? (Select all that apply) fungi, ferns, bacteria, viruses, grasses
Answer:
Fungi, bacteria, ferns,
Explanation:
bacteria Fungi Ferns are important. decomposers,
I hope it helps you.
There are basically four different categories of decomposers: fungi, insects, earthworms, and bacteria. Fungi, ferns and bacteria are common decomposers.
What are decomposers ?Decomposers are organisms that disintegrate rotting or dead species; they carry out decomposition, a process only some kingdoms, like fungi, are capable of.
The primary decomposers in nature are fungi, which destroy organic material that would otherwise not be recycled.
Scavengers and decomposers are the two different categories of decomposers. Animals called scavengers hunt down dead plants or animals and consume them. They cut them into small pieces when they eat them.
Each contributes to the food recycling process differently. To transform dead plants or animals into simple substances, fungi release compounds. Some of these elements are absorbed by them for growth, while others go into the soil.
Thus, Fungi, ferns and bacteria are common decomposers.
To learn more about decomposers, follow the link;
https://brainly.com/question/896544
#SPJ2
An apple, potato, and onion all taste the same if you eat them with your nose plugged
true or false
i know the answer do you?
Answer:
Ummm it would just be indistinguishable ..and i don’t think u well taste when u plug your nose so ldk but ig it is true let me know if am wrong
Explanation:
Please help!! I was sick when he went over this
Answer:
5.70×10^-11 m
Explanation:
Metallic bonds are formed because valence clectrons are -
A. Fixed to each metal atom
B. Shared between many metal cations
A chemical reaction that has the general formula of AB + C → CB + A is best classified as a
synthesis
polymerization
decomposition
oxidation
replacement
reaction.
Replacement reaction.
Further explanationGiven
A chemical reaction
AB + C → CB + A
Required
reaction type
Solution
There are several types of reactions that can occur
synthesis: 2 elements combine to form a single product
polymerization: monomers combine to produce a polymer
decomposition: One compound breaks down into 2 components
oxidation : a change in oxidation number
replacement can be divided into 2
single replacement if one element replaces the other elements of a compound
double replacement if there is an ion exchange between two ion compounds in the reactant to form two new ion compounds
AB + C → CB + A
If we look at this reaction, element C replaces element A to form a new compound CB. So it is single replacement. But this reaction can also be said to be an oxidation-reduction reaction because there is a change in oxidation number
element A undergoes a reduction reaction
element C undergoes an oxidation reaction
So types of redox reactions can be combination, decomposition, displacement, combustion, and disproportion.
Answer:
oxidation
Explanation:
i passed and got 100%
Elements in group 17 want to lose seven valence electrons and elements in group 1 want to gain seven valence electrons to become stable ions.
Why dont people brush their teeth?Like some be going around people and everything,UGHHHHH!
Please tell me
Answer:
like so true just brush your teeth... if you can't afford it then no disrespect to you
Explanation:
Answer:
their fault when the grow up and have yellow teeth + dentures and they are like 28 XD
Explanation:
A body is moving with an acceleration of 60 m/s2. If the force applied to t
body is 42000 N, calculate its mass
Explanation:
Fnet = ma
m = Fnet/a = 42,000N/(60m/s²) = 700kg.
Julio measured the weight of a grain of sand and found it to be 3.5 times 10 Superscript negative 10 kg. He also measured the weight of one hair from his eyebrow and found that to be 7 times 10 Superscript negative 8 kg.
What is the total weight of both objects?
3.507 times 10 Superscript negative 10 kg
7.035 times 10 Superscript negative 10 kg
3.507 times 10 Superscript negative 8 kg
7.035 times 10 Superscript negative 8 kg
The total weight of both objects : 7.035 x 10⁻⁸ kg
Further explanationGiven
The weight of a grain of sand : 3.5 x 10⁻¹⁰ kg
The weight of one hair from his eyebrow : 7 x 10⁻⁸ kg
Required
The total weight of both objects
Solution
Scientific Notation consists of 2 parts
1. the first part: the first digit followed by the decimal point
2. The second part: the power of 10 (the exponents).which shows the number of digits after the decimal point
To add/subtract, the exponents must be the same and then add/subtract the coefficient
convert the largest exponent (7 x 10⁻⁸)7 x 10⁻⁸ = 700 x 10⁻¹⁰
add the coefficients[tex]\tt =(3.5+700)\times 10^{-10}\\\\=703.5\times 10^{-10}\\\\=7.035\times 10^{-8}[/tex]
Answer:
in other words its: d
Explanation:
Do the earth plates ride on the crust or mantle?
Answer:
Mantle
Explanation:
The crust is also known as earths tectonic plates
How many molecules of SrCrO4 are in a sample of SrCrO4 0.556 moles?
Answer:
[tex]3.35*10^{23}\ SrCrO_4\ molecules[/tex]
Explanation:
[tex]We\ are\ given\ that,\\No.\ of\ moles\ of\ SrCrO_4=0.556\\Hence,\\As\ we\ know\ that,\\No.\ of\ particles=Avagadro's\ Constant*No.\ of\ moles\\We\ already\ know\ that\ Avagadro's\ Constant=6.022*10^{23}\\Here,\\No.\ of\ SrCrO_4\ molecules= 6.022*10^{23}*0.556\\Hence,\\No.\ of\ SrCrO_4\ molecules=3.348*10^{23} molecules\ \approx 3.35*10^{23}\ SrCrO_4\ molecules[/tex]
will mark brainliest
Answer:
D. water
Hope it will help you......can i have some help :'(
manganese atom has 30 neutrons and atomic number 25
calculate the atomic mass of manganese atom
The atomic mass of manganese atom : 55
Further explanationGiven
Manganese (Mn) atom has 30 neutrons
atomic number 25
Required
the atomic mass
Solution
The atomic mass=number of protons+number of neutrons
The atomic number = number of protons=number of electrons
The number of protons=25, so the atomic mass :
[tex]\tt =ptotons+neutrons\\\\=25+30\\\\=55[/tex]
The three types of ocean floor sediments are classified according to their _____.
Answer:
Origin
Explanation:
Please help I’ll give you guys brainiest!
Thank youuuuuuu :))
Answer:
Balanced.
Explanation:
Both sides are pulling with equal force.
Answer/Explanation:
These forces are balanced. In order for forces to be balanced they must be pulling/pushing the same amount of net force in opposing directions.
In order for forces to be balanced they must be pulling/pushing in opposing directions but with differentiating net force.
A student calculates the density of an unknown solid. The mass is 10.04 grams, and the volume is 8.21 cubic centimeters. How many significant figures should appear in the final answer
Answer:
1.22 g/cm³
Explanation:
Density = mass ÷ volume
Mass = 10.04 grams
Volume = 8.21 cubic centimeters
Density = mass ÷ volume
= 10.04 ÷ 8.21
= 1.2228989037758 g/cm³
Approximately
1.22 g/cm³ to 2 significant figure.
The final answer should be approximated to 2 significant figure because the mass and volume of the objective given is in 2 significant figure