After an over current protective device has been opened due to an automatic operation, it is required to ____ before closing the over current protective device

Push notifications would likely be the best option for adding a second authentication factor that is user-friendly and non-disruptive.

An authentication application, such as a token generator or authenticator app, could also be a good choice, as it would allow users to easily complete the second authentication step without having to remember additional passwords or codes.

TPM (Trusted Platform Module) and HSMs (Hardware Security Modules) are hardware-based security measures that can provide additional protection for sensitive data, but they may not be as user-friendly or non-disruptive as the other options.

It's worth considering the specific needs and requirements of your organization and the users in deciding which option to choose.

Learn more about authentication, here https://brainly.com/question/29752591

#SPJ4

Answer:

Explanation:

To answer your question, I will start by outlining the requirements needed to design the interior panel C of the flat plate floor using EFM. Firstly, we need to consider the fact that fy = 414 MPa, fd = 25 MPa, LL =4.8 kN/m² and DL = 1.0 kN/m² in addition to self-weight of slab and floor height=3.66 m. Also, C1 and C2 are 460 mm and thickness of the slab hf is 216 mm respectively.

After considering the given information, we can proceed with designing interior panel C by first finding out the ultimate moment capacity for this panel according to EFM guidelines. Using a combination of flexural strength equations and suitably selected material strength constants based on slab type, we can calculate this capacity. Then determination of reinforcement size along with other design criteria such as yield line analysis need to be calculated in order to ensure stability and durability of structure under all kinds of loads. This process needs to be repeated for each interior panel in order to complete their EFM design process accurately. EFM is a powerful tool that can help you design the interior panel C of the flat plate floor shown in Figure below. With EFM, you can determine the optimal dimensions and material properties for the panel, and you can also assess the structural performance of the panel under different loads and conditions.

Topping off a leaking A/C system is Allowable everywhere in the U.S., except where state or local laws prohibit it. Thus, option C is correct.

Law is a set of rules created and enforced by social or governmental institutions to regulate behaviour, the precise definition of which has long been debated. It has been described as a science as well as an art form.

These laws serve as a guideline for acceptable behaviour and serve as a standard of conduct for citizens.

Therefore, option C is correct, that topping off a leaking A/C system is legal throughout the United States, except where state or local laws prohibit it.

Learn more about the law, refer to:

https://brainly.com/question/15400748

#SPJ4

A capacitor uses an electric field to store potential electric energy which can be used as a power source when connected to a network.

What is a capacitor and how it works?

Unlike the battery, a capacitor is a circuit component that temporarily stores electrical energy by distributing charged particles on (generally two) plates to create a potential difference. A capacitor can take a shorter time than a battery to charge up and it can release all the energy very quickly.

What is the main function of a capacitor?

The primary use of a capacitor is to store electrostatic energy in an electric field and hence supply this energy whenever possible to the circuit.

How does a capacitor store energy?

A charged capacitor stores energy in the electrical field between its plates. As the capacitor is being charged, the electrical field builds up. When a charged capacitor is disconnected from a battery, its energy remains in the field in the space between its plates.

Thus, the electric field is the correct answer.

To know more about a capacitor:

https://brainly.com/question/21851402

#SPJ4

The heat flow through the original wall is 627.7 W/m² and the heat flux through the retrofitted wall is 174.3 W/m². So the retrofitted wall has a significantly lower heat flux than the original wall, indicating that it is much more effective at preventing heat loss.

Heat energy is a form of energy that is associated with the motion of particles in a substance, such as the vibrations of atoms and molecules. It is a form of thermal energy that is transferred between objects that are at different temperatures.

To determine the heat flux through the original and retrofitted walls, we can use the equation for heat flux through a multi-layer composite wall, which is:

Q = [tex](T_i - T_o) / (\frac{1}{h_i} + \frac{L_i}{k_i} + \frac{Lg}{k_g} + \frac{Lo}{k_o} + \frac{1}{h_o} )[/tex]

Where:

T = the interior and exterior air temperatures, respectively

[tex]L_i, k_i, L_g, k_g, L_o,[/tex] and [tex]k_o[/tex] are the thickness, thermal conductivity, and convection heat transfer coefficient of each layer of the wall

[tex]h_i[/tex] and [tex]h_o[/tex] are the inner and outer convection heat transfer coefficients, respectively

we are informed that:

Li = 0 (interior air layer)

ki = 0 (interior air layer)

L1 = 25 mm

k1 = 0.1 W/m.K

L2 = 25 mm

k2 = 0.029 W/m.K

L3 = 5 mm

k3 = 1.4 W/m.K

Lo = 0 (exterior air layer)

ko = 0 (exterior air layer)

So the heat flux through the original wall is:

Qoriginal = (22 - (-20)) / (1/5 + (25/0.1) + 1/25) = 627.7 W/m²

And the heat flux through the retrofitted wall is:

Qretrofitted = (22 - (-20)) / (1/5 + (25/0.1) + (25/0.029) + (5/1.4) + 1/25) = 174.3 W/m²

Learn more about heat energy here, https://brainly.com/question/8206631

#SPJ4

Management information systems (MIS) directly assist corporate decision making -by helping managers communicate, obtain, discuss, and understand the information necessary for strategic decisions.

How do management information systems (MIS) function?

A collection of systems and processes known as a management information system (MIS) collect data from many sources, compile it, and present it in an usable fashion.

Managers create reports using a MIS to offer them a complete overview of all the data they need to make choices about everything from daily operations to top-level strategy.

Although the notion is older than contemporary computing technologies, today's management information systems heavily rely on technology to gather and show data.

Information Systems Types:

a. Transaction Processing Systems (TPS):

b. Management Information Systems (MIS)

c. Decision Support Systems (DSS)

To know more about management information systems, visit: https://brainly.com/question/12977871

#SPJ4

A. The mass of UF6 in a 30.0-L vessel of UF6 at a pressure of 690 torr at 360 K is 2298.4 g

B. The mass of 235U in the sample described in part A is 16.44 g

C. The mass of 235U in a sample of the diffused gas analogous to that in part A is 16.47 g.

D. The percentage of 235UF6 in the sample is 0.7179%

The values of the equations or problems given above are determined as follows:

A) To find the mass of UF6 in the 30.0 L vessel at a pressure of 690 torr and a temperature of 360 K, we need to use the ideal gas law:

PV = nRT

Where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

We can rearrange the equation to solve for n:

n = PV/RT

Plugging in the values, we get:

n = (690 torr)(30.0 L)/(8.31 J/mol*K)(360 K)

= 6.52 moles of UF6

To find the mass of UF6, we can multiply the number of moles by the molar mass of UF6, which is 352.0 g/mol:

mass = n * molar mass

= 6.52 moles * 352.0 g/mol

= 2298.4 g

B) To find the mass of 235U in the sample, we first need to calculate the mass of UF6 in the sample that is made up of 235U. We know that naturally occurring uranium consists of 99.274% 238U, 0.720% 235U, and 0.006% 233U by mass. Since the mass of the UF6 in the sample is 2298.4 g, the mass of 235U in the sample is (0.720%)(2298.4 g) = 16.44 g.

C) To find the mass of 235U in the diffused gas, we can use the equation provided:

r1r2 = urms1urms2 = (3RT/M1)(3RT/M2) = M2/M1

Where r1 and r2 are the ratios of 238U and 235U in the initial and final samples, respectively, and M1 and M2 are the molar masses of 238U and 235U, respectively.

We can rearrange the equation to solve for r2:

r2 = r1 * M2/M1

Plugging in the values, we get:

r2 = (16.44 g/2298.4 g) * (235.044 g/mol) / (238.05 g/mol)

= 0.7202

This means that the diffused gas has a ratio of 0.7202 235U to 238U. Since the mass of the UF6 in the sample is 2298.4 g, the mass of 235U in the diffused gas is (0.7202)(2298.4 g) = 16.47 g.

D) After one more cycle of gaseous diffusion, the ratio of 235U to 238U in the sample will be the same as it was in the diffused gas after the first cycle, 0.7202. The mass of 235U in the sample will also be the same, 16.47 g. To find the percentage of 235UF6 in the sample, we can divide the mass of 235U by the total mass of the UF6 and multiply by 100:

percentage = (16.47 g / 2298.4 g) * 100%

= 0.7179%

Therefore, the correct answers are as given above

learn more about percentage of mass: https://brainly.com/question/26150306

#SPJ1

This statement about networking is true.

A network is a system of interconnected components or entities that exchange data or information. It can refer to physical or virtual components, such as computers, wires, cables, and routers, or it can refer to the nodes and edges of a graph. Networking is the process of creating and maintaining connections between entities, which can be used to share resources and information. Networks can be used to connect computers to each other in a local area network (LAN) or to connect computers in different locations over the internet. Networks can also be used to connect people and organizations, or to provide services like email, video streaming, and telecommunication.

To know more about network click-

https://brainly.com/question/28041042

#SPJ4

As a result, Day(1,n+1) will be a list of days to buy a new automobile and sell the old one for the least amount of money. The code is given below.

Dynamic programming is mostly an improvement over straightforward recursion. Dynamic Programming may be used to optimize any recursive solution that has repeated calls for the same inputs. To avoid having to recompute the outcomes of sub-problems later, the idea is to just store them. With this straightforward improvement, time complexity is reduced from exponential to polynomial.

To write a program on dynamic program on car ownership:

By using the given data,

we have to write the program,

OPT(i, j) = minimum cost possible of purchasing car at year i, maintaining from i to j and then selling at j

OPT(i, i+1) = p(i)+m(i, i+1)-v(i, i+1)

OPT(i, j) =(min k) OPT(i, k)+OPT(k, j) for  i ≤ k ≤ j

For each pair of (i, j) where i<j, Day(i, j) will contain the list of days to buy car between i to j.

To see the code, see in the attached image.

Time complexity = O(n4).

Therefore, Day(1,n+1) will be a list of days to purchase a new automobile and sell the old one for the lowest price.

To learn more about the dynamic programming;

https://brainly.com/question/18720923

#SPJ4

Answer:

False

Explanation:

NoSQL databases, like denormalized relational databases, optimize for specific queries in your application. In other words, you know what queries you want to optimize for, so you choose a NoSQL product and a data design to support the queries you'll run.

Explanation in Detail:

I believe NoSQL is a meaningless term. Because it is perfectly possible to have relational databases that do not use SQL and vice versa, the concept should probably be called Not-Only-Relational (in theory at least).

A normalized relational database, on the other hand, is intended to store data with the fewest data anomalies and to maximize data integrity. This is obviously a good goal, but it is diametrically opposed to performance, which is what most people care about.

So, in my opinion, a NoSQL database is best if you want to optimize for specific queries in a specific application. If you want a database that is safe for your data and supports the widest range of queries against that data (for example, if you don't know what queries your app will need to run), a SQL database is the best choice.

To know more about NoSQL databases, visit: https://brainly.com/question/29835951

#SPJ4

There are more broadcast domains available. There are still the same amount of collision domains.

Although a switch can support many VLANs, none of them can speak to one another directly. If they could, the goal of a VLAN, which is to isolate a portion of the network, would be defeated. A router is necessary for VLAN communication. Numerous VLANs can be present on a single switch, and VLANs can span multiple switches. Trunking, a method that enables information from many VLANs to be transferred over a single connection between switches, is required in order for numerous VLANs on various switches to be able to communicate with one another.

Learn more about domains here:-

https://brainly.com/question/28135761

#SPJ4

Note that the above prompt is related to the use of Autodesk Software. The cause of the above warning is: "The Revit or view settings prohibit the newly generated object from being displayed."

Autodesk is a design software firm that serves customers in the manufacturing, architectural, building, and construction sectors, as well as media and entertainment. Autodesk has been in the forefront of robotics, augmented and virtual reality, and 3D printing.

It is to be noted that the Autodesk design tool is important because it is extensively utilized in many sectors.

It helps professionals in designing, testing, and visualizing goods and systems in a virtual environment, which may be more efficient and cost-effective than doing so in the actual world.

Learn more about Autodesk:
https://brainly.com/question/24788708
#SPJ1

Full Question:

Autodesk Related Prompt

Issue:

When creating an element, section, or linking a file within Revit, you receive the following warning message:

Warning

"None of the created elements are visible in Floor Plan: Level 2 View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings."

What is the cause of the above warning?

If you receive error 'The login is from an untrusted domain', this may mean that you changed password on your working machine and now need to update password on SQL Server machine.

Click Properties from the menu when you right-click the server you want to change. A security page should be chosen. Select either Windows Authentication or SQL Server and Windows Authentication mode under the Server authentication header. Select OK. Kerberos-based connections to SQL Server are supported by Azure Data Studio. You must configure a Kerberos ticket that connects your current user to a Windows domain account in order to use integrated authentication (Windows Authentication) on macOS or Linux. Click Start on the taskbar, then select Control Panel. Click Turn Windows Features on or off under Programs and Features in the Control Panel. Expand World Wide Web Services, Internet Information Services, and Security. Click OK after choosing Windows Authentication.

To learn more about untrusted domain click the link below:

brainly.com/question/28990038

#SPJ4

Answer:

#include <iostream>

using namespace std;

int main() {

int x;

cin>>x;

if (x>0){

for (int i=1;i<=x;i++){

if(x%i==0){

cout<<i<<" ";

}

}

}

else {

cout<<"write a positive num";

}

return 0;

}

Explanation:

i first checked if the num is positvie if no you ask the user for a positive num

i used a loop to find the factors by dividing the entered number on every num from 1 to the num

The value that applied force acting on the piston is 892.71 N.

[tex]p_1[/tex] = mercury density = 13600 kg/m^3

[tex]p_2[/tex] = water density = 1000 kg/m^3

h = height of mercury = 100 mm or 0.1 m

[tex]h_1[/tex] = height of water = 60 mm or 0.06m

A = piston area = 0.07m

First, we can calculate the total of pressure on the piston which is equal to pressure of mercury cylinder subtract the pressure of water cylinder.

ΔP = [tex]p_1[/tex]*g*h - [tex]p_2[/tex]*g*[tex]h_1[/tex]

= 13600*9.81*0.1 - 1000*9.81*0.06

= 12753

Then, we multiply the total pressure by area to calculate the force on the piston. So,

P = ΔP * A

= 12753 * 0.07

= 892.71 N

Thus, the force on piston is 892.71 N.

You question is incomplete, but most probably your full question was

(image attached)

Learn more about force here:

brainly.com/question/28012687

#SPJ4

How does hexagonal packing work? Hexagonally tightly packed (hcp) describes layers of packed spheres in which they alternately cover and expose one another. A close-packed structure called a slip framework is hexagonally close-packed. The hcp structure is very universal for elemental metals, including beryllium.

unit cell for which lattice parameter c/a is 1.58

The radius of the titanium atom is 0.1445nm=1.445×−8c

For a titanium unit cell

Atomic weight (A)=47.867/mol

Calculate the unit cell volume

(V)c=6R2c√3=6×(1.445×10−8)2×1.58a√3

Here

a=2R

(Vc)=6×(1.445×10−8)2×1.58×(2×1.445×10−8)×√3=9.9084×10−23 cm3/unitcell

To know more about close-packed structure visit:-

brainly.com/question/6665073

#SPJ4

The Cartesian representation of exp(-j90) is 0 - 1j

Generally, The Cartesian representation of a complex number is its real and imaginary parts. In this case, the number exp(-j90) is a complex number with a phase of -90 degrees, which can be represented as a rotation by -90 degrees in the complex plane.

To find the Cartesian representation of exp(-j90), we can use Euler's formula, which states that a complex number in polar form (r,θ) can be represented in Cartesian form (x,y) as follows:

x = r * cos(θ) y = r * sin(θ)

where r is the magnitude of the complex number and θ is its phase angle in radians.

In this case, the magnitude of exp(-j90) is 1, since it is a unit complex number (its magnitude is 1). The phase angle is -90 degrees, which is equal to -π/2 radians. Therefore, the Cartesian representation of exp(-j90) is:

x = 1 * cos(-π/2)

= 0

y = 1 * sin(-π/2)

= -1

So the Cartesian representation of exp(-j90) is 0 - 1j.

Read more about cartesian representation

https://brainly.com/question/29298525

#SPJ1

The difference between lossy and lossless compression techniques are:

Lossy and lossless are two types of data compression techniques that are used to reduce the size of a file or data stream. In general, lossy compression is most appropriate when the file size needs to be reduced as much as possible, even if it means sacrificing some data quality, while lossless compression is most appropriate when the file needs to be reduced in size without losing any data.

Learn more about lossy and losses, here https://brainly.com/question/13663721

#SPJ4

To adjust your program from exercise 2 so that only lower case letters are allowed for valid passwords, check the code given below.

A programme is a set of instructions that a computer uses to carry out a particular task. A programme is like the instructions for a computer, to use an analogy. It includes a list of components (called variables, which can stand for text, images, or numeric data) and a list of instructions (called statements), which instruct the computer how to carry out a particular task.

Specific programming languages like C++, Python, and Ruby are used to create programmes. These high level programming languages are writable and human-readable. Compilers, interpreters, and assemblers inside the computer system then translate these languages into low level machine languages.

//CODE//

/*Exercise 2: Adjust your program from Exercise 1 so that only

lower case letters are allowed for valid passwords.*/

#include <iostream>

#include <string>

#include <cctype>

#include <cstring>

using namespace std;

//function prototypes

bool testPassWord(char[]);

int countLetters(char*);

int countDigits(char*);

bool islowerCase(char *strPtr);

int main()

{

char passWord[20];

cout << "Enter a password consisting of exactly 4 letters in lower case letters and 6 digits:";

cin.getline(passWord,20);

if (testPassWord(passWord))

cout << "Please wait - your password is being verified" << endl;

else

{

 cout << "Please enter a password with exactly  4 letters in lower case letters and 6 digits" << endl;

 cout << "For example, my1237Ru99 is valid" << endl;

}

// Fill in the code that will call countLetters and countDigits and will

//print to the screen both the number of

// letters and digits contained in the password.

cout << "There are " << countLetters(passWord) << " letters in the password.\n";

cout << "There are " << countDigits(passWord) << " digits in the password.\n";

if(countLetters(passWord)==4 && countDigits(passWord)==6)

{

cout<<"password: "<<passWord<<" is valid"<<endl;

}

else

cout<<"So, password: "<<passWord<<" is INVALID"<<endl;

//Pause the system for a while

system("PAUSE");

return 0;

}

//**************************************************************

// testPassWord

//

// task: determines if the word in the character array passed to it, contains //exactly 5 letters and 3 digits.

// data in: a word contained in a character array

// data returned: true if the word contains 5 letters & 3

// digits, false otherwise

//

//**************************************************************

bool testPassWord(char custPass[])

{

int numLetters, numDigits, length;

length = strlen(custPass);

if(!islowerCase(custPass))

{

 cout<<"Lower case letters are only allowed for valid password.";

}

numLetters = countLetters(custPass);

numDigits = countDigits(custPass);

//Check valid password consists of 10 characters,6 of which must be digits

//and the other 4 letters

if (numLetters == 4 && numDigits == 6 && length == 10 )

 return true;

else

 return false;

}

//**************************************************************

// countLetters

//

// task: counts the number of letters (both

// capital and lower case)in the string

// data in: a string

// data returned: the number of letters in the string

//

//**************************************************************

int countLetters(char *strPtr)

{

int occurs = 0;

while(*strPtr != '\0')

{

 if (isalpha(*strPtr))

 occurs++;

strPtr++;

}

return occurs;

}

bool islowerCase(char *strPtr)

{

int occurs = 0;

while(*strPtr != '\0')

{

 if (islower(*strPtr))

 occurs++;

strPtr++;

}

if(occurs==4)

return true;

else

 return false;

}

//**************************************************************

// countDigits

//

// task: counts the number of digits in the string

// data in: a string

// data returned: the number of digits in the string

//

//**************************************************************

int countDigits(char *strPtr)

{

int occurs = 0;

while(*strPtr != '\0')

{

if (isdigit(*strPtr)) // isdigit determines if the character is a digit

occurs++;

strPtr++;

}

return occurs;

}

Learn more about program

https://brainly.com/question/26497128

#SPJ4

The power drawn by the air conditioner is 1353.38 Watt

Power can be calculate as follows

T1: The home's initial temperature of 35 °C

T2 = 20°C, the house's final temperature

Δt =38 minutes, or 38 minutes x 60 seconds = 2280 s, are needed to cool the house.

800 kg is the mass of air in the home, or m.

0.72 kJ/kgK for Cv, specific heat at constant volume.

1.0 kJ/kgK for specific heat at constant pressure (Cp).

we can calculate the removing heat as follows:

q = mCvΔT

q = 800×720×(35-20) (35-20)

q = 8640000 J

Average removal rate of ears

Q= q/t

Q = 8640000/ 2280 = 3789.47 W

COP = Q/ W

W= Q/ COP

W= 3789.47/ 2.8

W = 1353.38

Learn more about power at https://brainly.com/question/24003945

#SPJ4

The Array object, like arrays in other programming languages, allows for the storage of a group of various elements under a single variable name and provides members for carrying out standard array operations.

The sum is equal to zero if the integers I are also equal to zero. If they add up to 1, then the result is 2. The sum is equal to 3 if they add up to 3. The sum is equivalent to 6 if they add up to 5. If they add up to 7, then the total also adds up to 7. The sum is equal to 8 if they add up to 8.

"#include iostream"

"cstring" should be included using the namespace std;

char integers[size]; int main(); /Declaring Variables & Character Array; int size = 100;

Small and large numbers are represented by the characters "9," "0," etc.

cout "Please enter a series of integers with a comma between each one."; cin >> integers; /Gathering Integers;

/To determine the length of the string, enter size = (strlen(integers) + 1);

creating the sum variable by setting it to 0;

The string's integers are added together as a whole using the formula for (int I = 0; I size; i++)

If (integers I >= "0" && I = "9" && I >= "0")

To know more about Array visit :-

brainly.com/question/19570024

#SPJ4

The two network management tools are Datadog and Zabbix.

Datadog

The application topology and interdependencies are well visualized, and Datadog assists in automatically monitoring and analyzing network traffic between the application's component parts. It is simple to access the metrics' past. It is easy to manage the downtime for different resources.

Zabbix

Zabbix can keep an eye on servers, networks, databases, and websites. The zabbix interface is absolutely fantastic. The team can monitor only the things that are important to them using the customized dashboards. aids in the production of reports on the network assets' performance. Monitoring connection availability is beneficial.

What are disadvantages of Datadog and Zabbix?

Datadog

A faster method of removing the resources from datadog would be preferable. Training is more expensive. There is a lack of documentation in some setup-related areas. Customization is valued over simplicity.

Zabbix

Reports that are already created can also be updated. Being open source does not imply that something is free. Overall, the UI is functional, not necessarily attractive. Increase the number of triggers that can be configured The user interface is now slightly more tidy. The process is a little bit lighter as a result.

Learn more about network monitoring tools

https://brainly.com/question/14293290

#SPJ4

Below is an example of the way that you can create the instance variables and constructor for the Employee class:

public class Employee {

 private String name; // instance variable to store the employee's name

 private int badgeNumber; // instance variable to store the employee's badge number

 private double hourlySalary; // instance variable to store the employee's hourly salary

 public Employee(String name, int badgeNumber, double hourlySalary) {

   this.name = name;

   this.badgeNumber = badgeNumber;

   this.hourlySalary = hourlySalary;

 }

}

The name, badgeNumber, and hourlySalary variables are marked as private, which means that they can only be accessed within the Employee class. The constructor takes in three arguments: the name, badgeNumber, and hourlySalary of the employee.

Therefore, Note also that this is just one way to implement the Employee class and its constructor. There are other ways to do it as well.

Learn more about instance variables from

https://brainly.com/question/28265939
#SPJ1

(100, 0) is stored in a_tuple after the above code is run.

The language that a computer can understand is generally referred to as code. Natural language cannot be understood by computers. As a result, the computer must translate human language into a set of "words" it can comprehend.

The words that, when used in a program, start a standard action are known as keywords. Syntax is the set of keywords that must be present for a computation to be successfully performed. A programming language is made up of a set of keywords and syntax.

The word "code" by itself is so vague that it doesn't convey much. Consideration of code as instructions as opposed to data can be helpful. This means that computer code takes data as an input, processes it, and then outputs the result.

Learn more about code

https://brainly.com/question/26134656

#SPJ4

Maximum tensile to y bar is 3.40 in and I Na is 91.73 in4 whereas bending stress is 1.78 ksi.

When an object is subjected to an external load at any cross-section, it typically experiences bending stress. The relationship between the section's section modulus and bending moment is another definition for the bending stress. The equation calculates the bending stress for the rail. Tensile strength is the maximum load or stress that a material can withstand before stretching and breaking. Tensile stress and strain are the two components of tensile force, which is the stretching force acting on the material. This indicates that the force is seeking to stretch the material that is subject to it since it is under tension.

To learn more about Bending Stress click here

brainly.com/question/24227487

#SPJ4

The required length of a shaft is approximately 2.96 meters.

To find the length of the shaft, you need to use the torsion formula, which is:

T = (Torque)/(pJ)

Where:

T is the angle of twist in radians

Torque is the applied torque

p is the radius of the shaft

J is the torsional stiffness of the shaft

To find the length of the shaft, you will need to rearrange the torsion formula to solve for L, the length of the shaft. The resulting equation will be:

L = (TpJ)/(Torque)

Plugging in the known values, we get:

L = (2° × 120 mm × 90 GPa) / (200 kW)

Converting the angle of twist to radians and the power to torque gives:

L = (0.0349 × 120 mm × 90 GPa) / (2777 Nm)

Solving this equation gives a shaft length of approximately 2.96 meters.

This is the minimum length of the shaft required to transmit the specified torque without exceeding the specified angle of twist.

To learn more about the torsion click here:

https://brainly.com/question/27375807

#SPJ1

Answer:

Biological Hazards.

Chemical Hazards.

Physical Hazards.

Safety Hazards.

Ergonomic Hazards.

Psychosocial Hazards.

The type of element is Resistor and inductor in series. While the impedance will be 1.08 + 0.72.

What is Resistor?

A passive electrical component with two terminals that is used in electrical circuits to limit or regulate the flow of electric current.

The main function of a resistor is to reduce current flow and voltage in a specific section of a circuit. It is made of copper wires coiled around a ceramic rod, and the resistor's outer surface is coated with insulating paint.

Ohm is the SI unit of resistor.

The two basic types of resistors are as follows:

To know more about Resistor, visit: https://brainly.com/question/29006457

#SPJ4

The key elements  that needs to be addressed in Jupiter Bach’s corporate culture for the new sustainability strategy to have an impact on the performance are:

There are several key elements that should be addressed in Jupiter Bach's corporate culture in order for the new sustainability strategy to have a meaningful impact on the company's performance:

Leadership: It is important for the leadership team at Jupiter Bach to fully support and embody the values and goals of the sustainability strategy.

Communication: Effective communication is key to the success of any corporate culture change, and this is especially true when it comes to sustainability.

Employee engagement: The sustainability strategy will only be successful if it is embraced by the entire workforce at Jupiter Bach.

Therefore, in Continuous improvement: Sustainability is an ongoing journey, and it is important for Jupiter Bach to continuously assess and improve its practices in order to make progress towards its goals.

Learn more about sustainability strategy from

https://brainly.com/question/1581810

#SPJ1