Methods like vacuum or gravity filtration, washing in a separatory funnel, decanting, and distillation. The choice of method depends on the nature of the drying agent used and the properties of the organic solution.
Vacuum or gravity filtration can be used to remove solid drying agents, such as silica gel or molecular sieves, from the solution.
A wash in a separatory funnel can be used to remove liquid drying agents, such as concentrated sulfuric acid, by adding water or another appropriate solvent to the mixture and then separating the layers. Decanting can be used for simple drying agents that settle at the bottom of the container.
Distillation can be used to remove volatile drying agents, such as magnesium sulfate, by heating the solution and collecting the distillate.
To know more about "Gravity filtration" refer here:
https://brainly.com/question/31389171#
#SPJ11
4. Give balanced equations for the following reactions. a) Combustion of cyclopentene C.Hg + 7 0, --> 5 CO, +4 H,O b) Addition of bromine to l-butene c) Reaction of nitric acid with benzene d) Addition of sulfuric acid to ethyl benzene.
a) C5H8 + 7O2 --> 5CO2 + 4H2O
b) CH3CH=CHCH3 + Br2 --> CH3CHBrCHBrCH3
c) 6HNO3 + C6H6 --> 6NO2 + 2H2O + C6H3(NO2)3
d) C6H5CH2CH3 + H2SO4 --> C6H5CH2CH2HSO4 + H2O
With the molecular formula C6H6, benzene is an aromatic hydrocarbon that is colorless, extremely flammable, and volatile. It is a naturally occurring substance that is present in both natural gas and crude oil. Plastics, synthetic fibers, rubber, and colours are just a few examples of the many compounds that can be made from benzene. Long-term exposure to benzene, a highly poisonous and carcinogenic material, can result in major health issues, such as leukaemia and other types of cancer. It can contribute to the creation of ground-level ozone and smog, both of which have detrimental effects on both human health and the environment. It is also a volatile organic compound (VOC).
Learn more about benzene here:
https://brainly.com/question/24835328
#SPJ11
In the lab, Grignard reactions can be slow to initiate because of the magnesium metal turnings. This is because: a. magnesium is flammable b. the magnesium is coiled too tightly c. the magnesium reacts with air to form a magnesium oxide coating d. magnesium reacts with water
Grignard reactions can be slow to initiate because, C. the magnesium reacts with air to form a magnesium oxide coating.
What is magnesium metal turnings?Magnesium metal turnings are thin shavings or filings of magnesium metal. They are commonly used as a reagent in organic chemistry reactions, such as the Grignard reaction, where they react with organic halides to form carbon-carbon bonds.
Magnesium turnings are often preferred over other forms of magnesium, such as powder or ribbon, because they have a higher surface area and are easier to handle. However, they can also pose some safety risks, such as flammability and reactivity with air and water.
Find out more on magnesium metal turnings here: https://brainly.com/question/30669128
#SPJ1
Determine which liquid is which, two blue solutions and two clear choices:
CuSO4
Cu(NO3)2
NH4OH
CaCl2
To determine which liquid is which among the two blue solutions (CuSO4 and Cu(NO3)2) and two clear choices (NH4OH and CaCl2), follow these steps:
Step 1: Identify the colors of the given solutions:
- CuSO4 (copper sulfate) is a blue solution.
- Cu(NO3)2 (copper nitrate) is also a blue solution.
- NH4OH (ammonium hydroxide) is a colorless or clear solution.
- CaCl2 (calcium chloride) is a colorless or clear solution.
Step 2: Match the solutions with their respective colors:
- The two blue solutions are CuSO4 and Cu(NO3)2.
- The two clear choices are NH4OH and CaCl2.
Answer: The two blue solutions are copper sulfate (CuSO4) and copper nitrate (Cu(NO3)2), while the two clear choices are ammonium hydroxide (NH4OH) and calcium chloride (CaCl2).
https://brainly.com/question/22595955
#SPJ11
How many moles of NO are required to generate 7.32 x 105 NO2 molecules according to the following equation: Use 6.022 x 103 mol-1 for Avogadro's number. Your answer should have three significant figures Provide your answer below: mols
0.121 mols of NO are required to generate 7.32 x 10^5 NO2 molecules.
To find the moles of NO required, we first need to determine the number of moles of NO2 based on the provided number of molecules.
Given, 7.32 x 10^5 NO2 molecules.
To convert molecules to moles, we will use Avogadro's number (6.022 x 10^23 mol⁻¹).
Moles of NO2 = (7.32 x 10^5 molecules) / (6.022 x 10^23 mol⁻¹) = 1.22 x 10^-18 moles
Now, according to the balanced chemical equation (which is not provided), we will assume a 1:1 mole ratio between NO and NO2.
Therefore, moles of NO required = 1.22 x 10^-18 moles.
So, 1.22 x 10^-18 moles of NO are required to generate 7.32 x 10^5 NO2 molecules.
Learn more about NO2 here: brainly.com/question/20291234
#SPJ11
For the given reaction, what volume of O, would be required to react with 7.6 L of PCI,, measured at the same temperature and
pressure?
2 PCI, (g) + O₂(g) → 2 POCI, (g)
-
The volume of oxygen, O₂ required to react with 7.6 L of PCI₃ measured at the same temperature and pressure is 3.8 liters
How do i determine the volume of oxygen required?The volume of oxygen, O₂ required to react with 7.6 liters of PCI₃ at the same temperature and pressure can be obtain as illustrated below:
Balanced equation for the reaction:
2PCI₃(g) + O₂(g) → 2POCI₃(g)
Since the reaction took at constant temperature and pressure, thus we have that:
From the balanced equation above,
2 liters of PCI₃ reacted with 1 liters of oxygen, O₂
Therefore,
7.6 liters of PCI₃ will react = (7.6 liters × 1 liter) / 2 liters = 3.8 liters of oxygen, O₂
Thus, from the above calculation, it is evident that the volume of volume of oxygen, O₂ required for the reaction is 3.8 liters
Learn more about volume:
https://brainly.com/question/9614052
#SPJ1
suppose that during the titration of khp solution with naoh, you spill some of the khp (acid) solution before the start of the titration. you continue with the procedure as if nothing had happened. how will this influence the calculated naoh concentration?
The calculated NaOH concentration will be lower than the actual concentration.
During the titration of KHP (acid) solution with NaOH (base), the goal is to determine the concentration of the NaOH solution by measuring the volume of NaOH needed to react with a known amount of KHP. If some KHP solution is spilled before the titration begins, the actual amount of KHP used in the titration will be less than what you assume it to be.
When you continue with the titration procedure and reach the endpoint, you will have used less volume of NaOH than if the KHP spill had not occurred. This leads to a lower calculated NaOH concentration because you assume that the same amount of KHP reacted with the NaOH, when in reality, it was less. Thus, the calculated NaOH concentration will be lower than the actual concentration due to the spilled KHP solution.
To know more about titration visit:
brainly.com/question/31271061
#SPJ11
what is the enthalpy for a two-step reaction, given for the two steps are 225 kj and -147 kj, respectively?
The enthalpy for a two-step reaction, given for the two steps are 225 KJ and -147 KJ, respectively is found to be 78 kJ.
To find the enthalpy of the overall reaction, we need to add the enthalpies of the two steps. If the reaction is,
A → B → C, the reactant A, intermediate is B, and the final product is C, then we can write the enthalpy change for the two steps as,
ΔH₁: A → B, enthalpy change = 225 kJ
ΔH₂: B → C, enthalpy change = -147 kJ
The overall enthalpy change for the reaction A → C is the sum of the enthalpies for the two steps, so,
ΔHtotal = ΔH₁ + ΔH₂
= 225 kJ + (-147 kJ)
= 78 kJ
Therefore, the enthalpy change for the overall reaction A → C is 78 kJ.
To know more about enthalpy of reaction, visit,
https://brainly.com/question/28772375
#SPJ4
Aromatic compounds often have multiple names that are all accepted by IUPAC. Choose the three different systematic (IUPAC) names for the following compound. Choose 3 below
4-bromo-1-hydro-2-methylbenzene
1-bromo-4-hydroxy-2-methylbenzene
5-hydroxy-2-bromotoluene
5-bromo-2-hydroxytoluene
2-hydro-5-bromotoluene
4-bromo-1-hydroxy-2-methylbenzene
4-bromo-2-methylphenol
2-bromo-4-methylphenol
The three different systematic (IUPAC) names for the same compound are:
1. 5-bromo-2-hydroxytoluene
2. 4-bromo-1-hydroxy-2-methylbenzene
3. 4-bromo-2-methylphenol
The IUPAC nomenclature is the set of rules for naming the organic compounds as per the International Union of Pure and Applied Chemistry.
To know more about IUPAC nomenclature, click on the below link:
https://brainly.com/question/30086566
#SPJ11
Rank the following substituents by increasing activation strength toward electrophilic aromatic substitution reactions. Explain your choice. a. -N(CH3)2 b. -CN c. -Br d. -CH2CH3
Answer:
The activation strength of substituents in electrophilic aromatic substitution reactions refers to their ability to increase the reactivity of an aromatic ring towards electrophilic attack. Substituents that are electron-donating or have a positive inductive effect are considered activating, while those that are electron-withdrawing or have a negative inductive effect are considered deactivating. Here is the ranking of the given substituents by increasing activation strength:
-Br
-CH2CH3
-CN
-N(CH3)2
Explanation:
-Br (bromine) is a deactivating substituent. It has a negative inductive effect, which withdraws electron density from the ring, making it less reactive towards electrophilic aromatic substitution reactions. Hence, it has the lowest activation strength among the given substituents.
-CH2CH3 (ethyl) is a weakly activating substituent. It has a slight electron-donating effect due to the +I (inductive) effect of the alkyl group, which can increase the electron density on the aromatic ring and make it more reactive towards electrophilic attack. However, the effect is relatively weak compared to other activating groups, so it has a moderate activation strength.
-CN (cyano) is a moderately activating substituent. It has both electron-donating (+I) and electron-withdrawing (-M) effects. The electron-donating effect dominates over the electron-withdrawing effect, making it an activating group overall. It can increase the electron density on the aromatic ring and enhance its reactivity towards electrophilic substitution reactions.
-N(CH3)2 (dimethylamino) is a strongly activating substituent. It has a strong electron-donating effect (+I), which can significantly increase the electron density on the aromatic ring and make it highly reactive towards electrophilic attack. Hence, it has the highest activation strength among the given substituents.
In summary, the ranking of the given substituents by increasing activation strength towards electrophilic aromatic substitution reactions is: -Br < -CH2CH3 < -CN < -N(CH3)2.
Mixtures are not made up of any set number of ??
find the missing length of CD in kite ABCD
Note that the missing part CD in the kite is 5
what is the explanation for the above?Given Kite ABCD
To find the lenght of CD
We know that, in a kite, the diagonals are perpendicular.
Thus,
Using Pythagoras Theorem,
CD² = 3² + 4²
CD = 9² + 16²
CD² = 25
√CD = 5 Units
The missing lenght of CD is 5
Learn more about Kite:
https://brainly.com/question/26679673
#SPJ1
Full Question:
See attached image.
how many moles of no are required to generate 7.32×1025 no2 molecules according to the following equation: 2no o2→2no2
Since NO and NO₂ have a molar ratio of 1:1, 3.66 x 10²⁵ moles of NO are needed.
Avogadro's number is 6.02 x 10²³, why?It shows how many atoms or molecules make up one gramme of an element's or compound's molecular weight. The result is 6.022 x 10²³ when the atomic mass of an element is divided by the actual mass of its atom.
The balanced chemical equation indicates: 2 NO + O₂ → 2 NO₂
1 mole of O₂ and 2 moles of NO₂ combine to form 2 moles of NO₂. The molar ratio of NO to NO₂ is thus 2:1, or just 1:1. Accordingly, one mole of NO₂ is created for every mole of NO that is utilised.
Therefore, the amount of NO₂ in moles is:
7.32×10²⁵ NO₂ molecules / 2 = 3.66×10²⁵ moles of NO₂
To know more about molecules visit:-
https://brainly.com/question/19922822
#SPJ1
At what temperatures will a reaction be spontaneous (i.e., ΔG° = -) if ΔH° = +62.4 kJ and ΔS° = +301 J/K?a. All temperatures below 207 K.b. All temperatures above 207 K.c. Temperatures between 179 K and 235 K.d. The reaction will never be spontaneous.
The reaction will be spontaneous at all temperatures lower than 207 K if H° = +62.4 kJ and S° = +301 J/K. Thus, option (a) is the proper one.
How do you assess the reaction's spontaneity?To calculate the standard free energy change, standard enthalpy change, standard entropy change, and standard temperature change, we can apply the equation G° = H° - TS°. T stands for Kelvin.
G° = (+62.4 kJ) - (207 K)(+301 J/K) = -10.9 kJ/mol is the result of substituting the supplied numbers.
The reaction occurs spontaneously at all temperatures lower than 207 K because G° is negative.
What in chemistry is a spontaneous reaction?A spontaneous reaction is one that favors the creation of products in the environment in which it is taking place.
To learn more about spontaneous reaction visit:
brainly.com/question/13790391
#SPJ1
A real gas .......a. does not completely obey the predictions of the kinetic-molecular theory b. consists of particles that do not occupy space c. cannot be condensed d. does not diffuse Оа Ob Od Ob
A real gas does not completely obey the predictions of the kinetic-molecular theory. This is because the kinetic-molecular theory assumes that gas particles have negligible volume and no intermolecular forces.
which is not always the case for real gases. Real gases also exhibit molecular interactions and can be condensed under certain conditions. However, real gases still exhibit diffusion, as gas particles are able to move and spread out through space.
As a result, real gases may deviate from the ideal gas behavior, which assumes no intermolecular forces and negligible volume of gas particles. Real gases can also diffuse, but their rate of diffusion may be influenced by the gas's molecular properties.
To know more about diffusion click here
brainly.com/question/10532944
#SPJ11
What concentration of c5h5nhcl is necessary to buffer a 0.44 m c5h5n solution at ph = 5.00? (the kb for c5h5n is 1.7×10^-9)
The concentration of C₅H₅NHCl necessary to buffer a 0.44 M C₅H₅N solution at pH 5.00 is 0.24 M.
1. Calculate the pOH by subtracting pH from 14: pOH = 14 - 5.00 = 9.
2. Find the OH⁻ concentration using the pOH: [OH⁻] = [tex]10^-^p^O^H[/tex] = 10⁻⁹.
3. Calculate the concentration of the base (C₅H₅N) in its ionized form: [C₅H₅N⁻] = (Kb × [C₅H₅N]) / [OH⁻] = (1.7 × 10⁻⁹ × 0.44) / 10⁻⁹ = 0.748 M.
4. Use the Henderson-Hasselbalch equation: pH = pKa + log ([A⁻]/[HA]).
5. Rearrange to solve for [HA]: [HA] = [A⁻] / [tex]10^(^p^K^_a-pH)[/tex].
6. Calculate [HA]: [HA] = 0.748 / (10⁽⁹⁻⁵⁾)= 0.24 M.
Thus, the concentration of C₅H₅NHCl needed is 0.24 M.
To know more about Henderson-Hasselbalch equation click on below link:
https://brainly.com/question/13423434#
#SPJ11
In your own words, what are the roles of crystal violet and bile salts in MacConkey agar? In your own words, what are the roles of neutral red and lactose in MacConkey agar?
In MacConkey agar, crystal violet and bile salts play crucial roles in inhibiting the growth of Gram-positive bacteria, allowing for the selective growth of Gram-negative bacteria.
Crystal violet is a dye that penetrates the thick cell walls of Gram-positive bacteria, while bile salts disrupt their cell membrane, preventing their growth.
Neutral red and lactose have distinct functions in MacConkey agar. Neutral red serves as a pH indicator, turning red in response to the acidic environment produced by lactose-fermenting bacteria. Lactose, on the other hand, is a carbohydrate that allows for the differentiation of lactose-fermenting and non-lactose-fermenting Gram-negative bacteria. Lactose-fermenting bacteria produce acidic byproducts, which cause the neutral red to change color, resulting in the formation of red or pink colonies.
Learn more about crystal violet at https://brainly.com/question/14775957
#SPJ11
What reason(s) are there to perform Catalytic Cracking?
calculate the ph of a 0.0727 m aqueous sodium cyanide, nacn, solution at 25.0 °c. kb for cn- is 4.9x10-10
a.8.78
b.9.33
c.1.14
d.5.22
e.10.00
The pH of a 0.0727 m aqueous sodium cyanide, nacn, solution at 25.0 °c. kb for cn- is 4.9x10-10 is 8.78. The correct option is a.
The first step is to write the equilibrium equation for the reaction of CN- with water:
CN- + H2O ⇌ HCN + OH-
The equilibrium constant for this reaction is the base dissociation constant, Kb, which is given as 4.9x10^-10.
Kb = [HCN][OH-]/[CN-]
At equilibrium, the concentrations of HCN and OH- are equal, so we can simplify the expression to:
Kb = [OH-]^2/[CN-]
We are given the concentration of CN- as 0.0727 M. Let x be the concentration of OH- at equilibrium. Then the expression for Kb becomes:
4.9x10^-10 = x^2/0.0727
Solving for x gives:
x = 6.29x10^-6 M
The pH of the solution is given by:
pH = -log[H+]
[H+] = Kw/[OH-] = 1.0x10^-14/6.29x10^-6 = 1.59x10^-9
pH = -log(1.59x10^-9) = 8.80
Therefore, the pH of the solution is approximately 8.78, which is closest to option (a).
For more such questions on pH.
https://brainly.com/question/11300720#
#SPJ11
beginning in the mid-nineteenth century, the movement promised contact with the divine through ghosts and spirits.
In the mid-nineteenth century, the Spiritualism movement emerged, promising contact with the divine through communication with ghosts and spirits.
The mid-nineteenth century saw the rise of a movement that promised believers the opportunity to connect with the divine through communication with ghosts and spirits. This spiritualism movement attracted many followers who sought comfort and guidance from beyond the physical world. Through mediums, individuals were able to contact deceased loved ones and receive messages from the divine realm. While the movement had its critics, it remained a popular form of spiritual practice for many who sought a deeper understanding of the divine.
In the mid-nineteenth century, the Spiritualism movement emerged, promising contact with the divine through communication with ghosts and spirits.
Learn more about Spiritualism here: https://brainly.com/question/30061176
#SPJ11
what conclusions can you make regarding the genetics relating to sodium benzoate? is there a clear dominant/ recessive trait?
The genetic link to sodium benzoate is not yet fully understood, as there is no clear dominant/recessive trait and studies have provided mixed results. Further research is needed to clarify the relationship and identify other contributing factors.
Why there is no clear dominant trait about genetic link to sodium benzoate?There is no clear evidence to suggest a direct genetic link or a clear dominant/recessive trait related to sodium benzoate. While some studies have suggested that certain genetic variations may affect an individual's sensitivity to sodium benzoate, more research is needed to confirm these findings and to determine the underlying mechanisms involved.
Additionally, other factors such as diet, lifestyle, and environmental exposures may also play a role in an individual's response to sodium benzoate.
Learn more about Dominant trait
brainly.com/question/20744588
#SPJ11
In dissolving the KHP you use 20 ml of distilled water rather than 50 ml. This has the following effect
Select one:
a. The amount of water used has no effect on the results
b. The percent acetic acid in vinegar you calculate will be too high
c. You will require more NaOH to reach the endpoint
d. The molarity of the NaOH that you calculate will be too low
When dissolving KHP, using 20 ml of distilled water instead of 50 ml has the following effect: The molarity of the NaOH that you calculate will be too low. The correct answer is option d.
The molarity of a solution is a measure of the concentration of that solution, defined as the number of moles of solute dissolved in one liter of solution. It is expressed in units of moles per liter (mol/L), or sometimes as "M".
When you use less water to dissolve the KHP, the solution becomes more concentrated. During the titration process, the more concentrated KHP solution will require less volume of NaOH to reach the endpoint. As a result, when calculating the molarity of the NaOH, you would get a value that is lower than the actual molarity.
Therefore option d is the correct answer.
Learn more about endpoint here:
https://brainly.com/question/15892951
#SPJ11
classify the bond(s) within each substance as either hydrogen, covalent, or ionic.MgCl2 2 strands of DNA NaCI H20 CH4 На 2 water molecules
The bond(s) within each substance is:
MgCl₂ - Ionic bond
2 strands of DNA - Covalent bond
NaCl - Ionic bond
H₂O - Covalent bond
CH4 - Covalent bond
H₂ - Covalent bond
2 water molecules - Hydrogen bond
Hydrogen bonds are weak chemical bonds that occur between a hydrogen atom and an electronegative atom, covalent bonds are strong chemical bonds that occur when two atoms share electrons, and ionic bonds are strong chemical bonds that occur between oppositely charged ions.
1. MgCl₂: This substance has ionic bonds, as it is formed by the transfer of electrons between a metal (Mg) and a non-metal (Cl).
2. 2 strands of DNA: The bonds within DNA strands are covalent, specifically, the backbone is connected by phosphodiester bonds and the base pairs are connected by hydrogen bonds.
3. NaCl: This substance has ionic bonds, as it is formed by the transfer of electrons between a metal (Na) and a non-metal (Cl).
4. H₂O: Water molecules have polar covalent bonds, where the electrons are shared between oxygen and hydrogen atoms but the sharing is unequal, creating a polar molecule.
5. CH₄: Methane has covalent bonds, as the electrons are shared between carbon and hydrogen atoms.
6. Н₂: H₂ (hydrogen gas) has covalent bonds between the hydrogen atoms.
7. 2 water molecules: The interaction between two water molecules is primarily through hydrogen bonds, formed due to the polarity of the water molecules.
Learn more about chemical bonds here: https://brainly.com/question/29794367
#SPJ11
Calculate the pH of a solution that is 0.20 M HOCl and 0.90 M KOCl. In order for this buffer to have pH=pKa, would you add HCl or NaOH? What quantity (moles) of which reagent would you add to 1.0 L of the original buffer so that the resulting solution has pH=pKa?
The pH of a solution that is 0.20 M HOCl and 0.90 M KOCl can be determined using the Henderson-Hasselbalch equation.
The pKa of HOCl is 3.1, which means that the pH of the solution should be around 3.1.
In order for the buffer to have pH=pKa, HCl needs to be added. The quantity of HCl required to reach the desired pH can be determined using the Henderson-Hasselbalch equation.
In this case, the quantity of HCl needed to be added to 1.0L of the original buffer to reach pH=pKa would be 0.05 moles of HCl. Adding HCl to the buffer will shift the equilibrium to the left, resulting in increased concentration of HOCl and decreased concentration of KOCl.
This will decrease the pH of the buffer and bring it closer to the desired pH=pKa.
Know more about Henderson-Hasselbalch here
https://brainly.com/question/13423434#
#SPJ11
How many moles will react with one mole of the following if the GR (Grignard reagent) is found in excess? ketone [Choose ] aldehyde [Choose ] ester [Choose ] diester [Choose ] acid [Choose ]
If the Grignard reagent is found in excess, one mole of aldehyde will react with one mole of the reagent. The number of moles that will react with other compounds listed depends on their specific chemical structure.
To determine the number of moles that will react with one mole of the following, consider the reactions of Grignard reagent (GR) with different functional groups:
1. Ketone: One mole of ketone reacts with one mole of Grignard reagent to form a tertiary alcohol.
2. Aldehyde: One mole of aldehyde reacts with one mole of Grignard reagent to form a secondary alcohol.
3. Ester: One mole of ester reacts with two moles of Grignard reagent to form a tertiary alcohol and one mole of alkoxide.
4. Diester: One mole of diester reacts with four moles of Grignard reagent to form a tertiary alcohol and two moles of alkoxide.
5. Acid: Grignard reagents cannot be used directly with acids, as they will react with the acidic proton and generate the corresponding alkane.
So, the number of moles reacting with one mole of each are:
- Ketone: 1 mole of GR
- Aldehyde: 1 mole of GR
- Ester: 2 moles of GR
- Diester: 4 moles of GR
- Acid: Cannot react directly with GR
To learn more about Grignard reagent click here https://brainly.com/question/30144052
#SPJ11
The _____ effect is the phenomenon responsible for a decrease in solubility of a salt when one of the salt's ions is already present in solution.
The common ion effect is the phenomenon responsible for a decrease in solubility of a salt when one of the salt's ions is already present in solution.
The common ion effect occurs when a salt's solubility decreases because one of the ions in the salt is already present in the solution. This effect is due to the Le Chatelier's principle, which states that if a system at equilibrium is disturbed, it will try to counteract the disturbance to re-establish equilibrium. In this case, the addition of a common ion shifts the equilibrium towards the solid state, reducing the concentration of ions in solution and decreasing the solubility of the salt. This effect is particularly important in precipitation reactions, where the addition of a common ion can cause a solid to form, and in buffer solutions, where the common ion can affect the pH of the solution. In physiological processes, the common ion effect can affect the absorption and excretion of ions in the body.
Know more about common ion effect here:
https://brainly.com/question/28202991
#SPJ11
mL of 0.20 M NaOH added Calculated pH (from prelab) 0.00 4.18 Measured pH (from titration curve) 40 4.05 10.00 5.408 405.13 15.00 5.885 49 5.45 20.00 9.20 4.09.22 22.00 11.98 40 11.19 In-Lab Question 3a. What is the experimental pk, value for hydrogen phthalate (HP or HC8H404) that you found at the midpoint of your KHP titration curve? Label the pka on each copy of your KHP titration curve. 4.0 In-Lab Question 3b. The accepted value for the pk, of HP is 5.408. How does this compare to your experimental value?
Based on the information provided, it is not possible to determine the mL of 0.20 M NaOH added.
However, the prelab calculation and measured pH values are given for various amounts of NaOH added during a titration of hydrogen phthalate (HP or HC8H404).
In-Lab Question 3a asks for the experimental pKa value for HP found at the midpoint of the KHP titration curve. The provided answer is 4.0, and the instruction is to label the pKa on each copy of the KHP titration curve.
In-Lab Question 3b asks for a comparison of the experimental pKa value to the accepted value of 5.408 for HP. Without the experimental pKa value for HP, it is not possible to determine the comparison between the two values.
Based on the provided data, the experimental pKa value for hydrogen phthalate (HP or HC8H4O4) found at the midpoint of your KHP titration curve is 4.0. When comparing this experimental value to the accepted pKa value of 5.408, it is slightly lower. This difference could be due to experimental errors, inaccuracies in measurements, or other factors during the titration process.
To learn more about hydrogen phthalate visit;
https://brainly.com/question/15236909
#SPJ11
write the balanced molecular chemical equation for the reaction in aqueous solution for rubidium bromide and lead(ii) perchlorate. if no reaction occurs, simply write only nr.
The balanced molecular chemical equation for the reaction between rubidium bromide and lead(II) perchlorate in aqueous solution can be written as: [tex]2RbBr[/tex](aq) + [tex]Pb(ClO_{4})_{2}[/tex] (aq) → [tex]2RbClO_{4}[/tex] (aq) + [tex]Pb(Br)_{2}[/tex] (s)
In this reaction, rubidium bromide reacts with lead(II) perchlorate to form rubidium perchlorate and lead(II) bromide. Lead(II) bromide is insoluble in water and forms a precipitate, which is represented by (s) in the equation.
What is an aqueous solution?
An aqueous solution is a solution in which water is the solvent. This means that the substance that is dissolved in the solution (the solute) is mixed with water to form a homogeneous mixture. In an aqueous solution, water molecules surround and separate the individual ions or molecules of the solute, which are dispersed throughout the solution.
Aqueous solutions are very common in nature and in everyday life, as many substances can dissolve in water to form solutions. For example, salt can dissolve in water to form a saltwater solution, and sugar can dissolve in water to form a sweetened water solution. Many chemical reactions also occur in aqueous solutions, as water can serve as a medium for the reactants to interact with each other.
To know more about aqueous solution, visit:
https://brainly.com/question/20592881
#SPJ1
what mass of benzoic acid, hc7h5o2, would you dissolve in 350.0 ml of water to produce a solution with a ph of 2.85? ka for benzoic acid = 6.3 10-5 .
Approximately 3.93 g of benzoic acid would need to be dissolved in 350.0 mL of water to produce a solution with a pH of 2.85.
To calculate the mass of benzoic acid needed to prepare a solution with a pH of 2.85, we need to use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where pH is the desired pH, pKa is the acid dissociation constant of benzoic acid (6.3 × 10^-5), [A-] is the concentration of the benzoate ion, and [HA] is the concentration of benzoic acid.
At pH 2.85, the concentration of [A-]/[HA] is 0.316.
We can assume that the concentration of benzoic acid in water is equal to its solubility limit, which is approximately 0.34 g/100 mL at room temperature.
Therefore, we can set up the following equation to solve for the mass of benzoic acid needed:
0.316 = 10^(2.85-4.2) = [A-]/[HA]
0.316 = [C7H5O2^-] / [C7H5O2H]
0.316 = x / (0.34 g/100 mL * 350.0 mL)
Solving for x gives:
x = 0.316 * (0.34 g/100 mL * 350.0 mL)
x = 3.93 g
Therefore, approximately 3.93 g of benzoic acid would need to be dissolved in 350.0 mL of water to produce a solution with a pH of 2.85.
Learn more about benzoic acid ,
https://brainly.com/question/24052816
#SPJ4
What is the amount of grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution?
There are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.
To calculate the amount of grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solutionWe need to use the formula:
mass = moles × molar mass
where
moles are equal to molarity times volume (in liters)One mole of a substance has a mass known as a molar massC12H22O11 (sucrose) has a molar mass of about 342.3 g/mol.
The volume must first be changed from milliliters to liters:
1000 ml = 1000/1000 L = 1 L
Next, we can determine how many moles of C12H22O11 are present in the solution:
moles = 2.0 M × 1 L = 2.0 moles
Finally, we can figure out how much C12H22O11 is present in the solution:
mass = moles × molar mass = 2.0 moles × 342.3 g/mol ≈ 684.6 grams
Therefore, there are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.
Learn more about molar mass here : brainly.com/question/21334167
#SPJ1
There are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.
To calculate the amount of grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solutionWe need to use the formula:
mass = moles × molar mass
where
moles are equal to molarity times volume (in liters)One mole of a substance has a mass known as a molar massC12H22O11 (sucrose) has a molar mass of about 342.3 g/mol.
The volume must first be changed from milliliters to liters:
1000 ml = 1000/1000 L = 1 L
Next, we can determine how many moles of C12H22O11 are present in the solution:
moles = 2.0 M × 1 L = 2.0 moles
Finally, we can figure out how much C12H22O11 is present in the solution:
mass = moles × molar mass = 2.0 moles × 342.3 g/mol ≈ 684.6 grams
Therefore, there are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.
Learn more about molar mass here : brainly.com/question/21334167
#SPJ1
What gaseous by-product is eventually given off from the base-catalyzed anhydride hydrolysis reagent? Hint: the proton-transfer reaction between sodium bicarbonate and the tetrahedral intermediate [RCO2CO-(OH)R] gives a dicarboxylate and eventually carbonic acid (upon the addition of hydrochloric acid during the work-up) (H2C03 pKa 6.35; see Mechanism in Question 9). What do you know about carbonic acid?
Carbonic acid (H2CO3) is a weak, diprotic acid that forms when carbon dioxide (CO2) dissolves in water. It is an important compound in the carbon cycle and plays a significant role in regulating the pH of natural water systems, including the ocean.
In the base-catalyzed anhydride hydrolysis reagent, the gaseous by-product given off is carbon dioxide (CO2). This occurs as the proton-transfer reaction between sodium bicarbonate and the tetrahedral intermediate [RCO2CO-(OH)R] forms a dicarboxylate. Upon the addition of hydrochloric acid during the work-up, carbonic acid (H2CO3) is formed, which then decomposes into water (H2O) and carbon dioxide (CO2). Carbonic acid has a pKa of 6.35 and is a weak acid involved in various chemical reactions and equilibria in natural systems, such as the carbonate buffering system in water.
To know more about Carbonic acid please refer: https://brainly.com/question/13929437
#SPJ11