Air is to be heated by passing it over a bank of 3-m-long tubes inside which steam is condensing at 100^\circ C.100∘C. Air approaches the tube bank in the normal direction at 20^\circ C20∘C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 1.6 cm, and the tubes are arranged staggered with longitudinal and transverse pitches of S_L = S_T = 4 cm.SL​=ST​=4cm. There are 20 rows in the flow direction with 10 tubes in each row. Determine (a) the rate of heat transfer, (b) and pressure drop across the tube bank, and (c) the rate of condensation of steam inside the tubes. Evaluate the air properties at an assumed mean temperature of 35^\circ C35∘C and 1 atm. Is this a good assumption?

In a successful separation scheme, it is essential to separate solutions from solids before adding the next reagent, this is because each reagent serves a specific purpose in the process, targeting particular components within the mixture.

By separating the solution from the solid first, you ensure that the desired reaction occurs only with the components in the solution, allowing for an accurate and efficient separation process. Additionally, the presence of a solid in the solution can interfere with the intended reaction, potentially causing unwanted side reactions or hindering the efficiency of the process. In some cases, the solid may even react with the reagent, which could lead to false results or the formation of unwanted by-products

Moreover, keeping the solution clear of solids also simplifies the analysis and identification of separated components, this allows for a more precise determination of the separated components and a more effective overall separation process. In summary, separating solutions from solids before adding the next reagent is crucial for maintaining the accuracy, efficiency, and reliability of a separation scheme. This practice ensures that the desired reactions occur without interference, minimizes the potential for unwanted side reactions, and facilitates the analysis of the separated components.

Learn more about solution at:

https://brainly.com/question/29195815

#SPJ11

To calculate the minimum amount of Na2CO3 needed to produce 2.00 kg of ethylene glycol, we first need to determine the balanced chemical equation for the reaction. From the given equation, we can see that 1 mole of C2H4Cl2 reacts with 1 mole of Na2CO3 to produce 1 mole of ethylene glycol (C2H6O2).

The molar mass of C2H6O2 is:

C: 12.01 x 2 = 24.02 g/mol
H: 1.01 x 6 = 6.06 g/mol
O: 16.00 x 2 = 32.00 g/mol
Total: 62.08 g/mol

Therefore, 2.00 kg of ethylene glycol is equivalent to:

2.00 kg = 2,000 g
2,000 g / 62.08 g/mol = 32.24 mol

Since the reaction requires 1 mole of Na2CO3 for every mole of C2H4Cl2, we need at least 32.24 moles of Na2CO3. The molar mass of Na2CO3 is:

Na: 22.99 x 2 = 45.98 g/mol
C: 12.01
O: 16.00 x 3 = 48.00 g/mol
Total: 105.99 g/mol

Therefore, the minimum amount of Na2CO3 needed is:

32.24 mol x 105.99 g/mol = 3,417 g or 3.42 kg

So, we need at least 3.42 kg of Na2CO3 to produce 2.00 kg of ethylene glycol.

Learn more about ethylene glycol here:

https://brainly.com/question/10405060

#SPJ11

To produce 2.00 kg of ethylene glycol from the given reaction, a minimum of 2.87 kg of  Na₂CO₃is needed.

The balanced chemical equation for the given reaction is:

C₂H4Cl₂(l) + Na₂CO₃(s) + H₂O(l) → C₂H₆O₂(l) + 2NaCl(aq) + CO₂(g)

From the equation, we can see that the mole ratio of  Na₂CO₃ to C₂H₆O₂is 1:1. Therefore, we need to calculate the amount of Na₂CO₃ required to produce 2.00 kg of C₂H₆O₂.

The molar mass of C₂H₆O₂ is:

2 x (12.01 g/mol for C) + 6 x (1.01 g/mol for H) + 2 x (16.00 g/mol for O) = 62.07 g/mol

The number of moles of C₂H₆O₂ required to produce 2.00 kg (or 2000 g) can be calculated as:

n(C₂H₆O₂) = mass/molar mass = 2000 g/62.07 g/mol = 32.22 mol

Since the mole ratio of Na₂CO₃ to C₂H₆O₂ is 1:1, we need 32.22 mol of Na₂CO₃ to produce 32.22 mol of C₂H₆O₂.

The molar mass of Na₂CO₃ is:

2 x (22.99 g/mol for Na) + 1 x (12.01 g/mol for C) + 3 x (16.00 g/mol for O) = 105.99 g/mol

The mass of Na₂CO₃ required to produce 32.22 mol can be calculated as:

mass = n x molar mass = 32.22 mol x 105.99 g/mol = 3,425.8 g = 3.43 kg

Therefore, a minimum of 3.43 kg (or 2.87 kg considering the significant figures) of Na₂CO₃ is needed to produce 2.00 kg of ethylene glycol.

Learn More about Ethylene glycol

https://brainly.com/question/24213993

#SPJ4

In the high phosphoryl-transfer potential of ATP, the adenine ring structure does not have any contribution. Therefore, the correct answer is option B.

Phosphoryl-transfer potential is the ability of an organic molecule, this ability helps the molecule to transfer a phosphoryl group to another molecule known as the acceptor molecule. ATP has a high phosphoryl-transfer potential. The main factors that contribute to the high phosphoryl-transfer potential of ATP are:

-resonance stabilization                                                                                   -charge repulsion                                                                                               -stabilization due to hydration                                                                        --increase in entropy                                                                                          

Therefore, adenine ring structure (option B) is the only factor that plays no role in the high phosphoryl-transfer potential of ATP.

To learn more about ATP's high phosphoryl-transfer potential, visit: https://brainly.com/question/28286963

#SPJ11

When a quantity of N₂O₄ is introduced into a flask at an initial pressure of 2 atm at temp T and after that the N₂O₄ has decomposed to NO₂ and has come to equilibrium, the pressure of N₂O₄ is 1.8 atm. The value of Kp for the process is 0.0889.

For the given reaction equation can be written as

                                    N₂O₄(g)  2NO₂(g)

 Initial(atm)                    2                             0

 Change(atm)                -x                            +2x

 Equilibrium(atm)          2-x                           2x

    Given that

      2-x = 1.8 atm

          x= 0.2 atm

  ∴ Pressure of NO₂(g) at equilibrium = 2x

                                                              = 0.4  atm

                          Kp = P(NO₂(g))² /P( N₂O₄(g))

                                 =(0.4)²/1.8 = 0.0889

Hence, the value of Kp is 0.0889.

Learn more about Kp from the link given below.

https://brainly.com/question/31254566

#SPJ1

The appropriate formal charges for each atom in the minimized Lewis structure of NCO⁻ are N = +3, C = +1, and O = +1.

To draw the Lewis structure of NCO⁻, we first need to determine the total number of valence electrons in the molecule. N has 5 valence electrons, C has 4, and O has 6, giving a total of 15 electrons. We then place the atoms in a linear arrangement with the N in the center and the C and O on either side. We then place the remaining electrons around each atom to satisfy the octet rule.
N: 5 valence electrons + 2 electrons from a triple bond with C + 1 lone pair = 8 electrons
C: 4 valence electrons + 2 electrons from the triple bond with N = 6 electrons
O: 6 valence electrons + 1 lone pair = 8 electrons
The Lewis structure of NCO⁻ is therefore:
:N≡C:O:
We can then calculate the formal charges of each atom by subtracting the number of lone pair electrons and half the number of bonding electrons from the number of valence electrons for each atom.
Formal charge on N = 5 - 2 - 1 = +2
Formal charge on C = 4 - 2 - 0 = +2
Formal charge on O = 6 - 4 - 1 = +1
To minimize the formal charges, we can move one of the lone pairs from the O to the C, giving:
:N≡C=O:
Formal charge on N = 5 - 2 - 0 = +3
Formal charge on C = 4 - 2 - 1 = +1
Formal charge on O = 6 - 4 - 1 = +1
Therefore, the appropriate formal charges for each atom in the minimized Lewis structure of NCO⁻ are N = +3, C = +1, and O = +1.

Learn more about Lewis structure :

https://brainly.com/question/20300458

#SPJ11

The halogenated acetanilide 5 must be transformed into the amine 6 before introducing iodine into the ring because of the differences in activating power between amide and amino groups, as well as the electrophilicity of the iodonium ion.

Step 1: Understand activating power.
Activating power refers to the ability of a substituent to increase the reactivity of an aromatic ring towards electrophilic aromatic substitution (EAS). Amide groups (as in acetanilide) are weakly activating, while amino groups are strongly activating.

Step 2: Consider electrophilicity.
Electrophilicity refers to the ability of a molecule or ion to accept electrons from another molecule or ion. The iodonium ion is a highly electrophilic species, which means it readily accepts electrons from nucleophiles.

Step 3: Explain the transformation.
Since the iodonium ion is highly electrophilic, it requires a strongly activating group on the aromatic ring to facilitate the reaction. The amide group in halogenated acetanilide 5 is only weakly activating, which makes it difficult for the iodonium ion to react with the aromatic ring. By transforming the halogenated acetanilide 5 into the amine 6, you introduce a strongly activating amino group, which greatly increases the reactivity of the aromatic ring towards the electrophilic iodonium ion, allowing for the successful iodination of the ring.

To learn more about electrophilicity https://brainly.com/question/31051319

#SPJ11

The de Broglie wavelength of the 25 g object moving at a speed of 5.0 m/s is 5.3 x 10^-34 m.

The de Broglie wavelength (in m) of an object is given by the equation λ = h/mv, where h is Planck's constant (6.626 x 10^-34 J*s), m is the mass of the object, v is the velocity of the object.

First, convert the mass from grams to kilograms:
25 g = 0.025 kg

Next, plug the values into the formula:
λ = (6.626 x 10^-34 Js) / (0.025 kg * 5.0 m/s)

Calculate the wavelength:
λ = (6.626 x 10^-34 Js) / (0.125 kg*m/s)
λ = 5.3 x 10^-34 m

To know more about de-broglie wavelength:

https://brainly.com/question/16629783

#SPJ11

The de Broglie wavelength of the 25 g object moving at a speed of 5.0 m/s is 5.3 x 10^-34 m.

The de Broglie wavelength (in m) of an object is given by the equation λ = h/mv, where h is Planck's constant (6.626 x 10^-34 J*s), m is the mass of the object, v is the velocity of the object.

First, convert the mass from grams to kilograms:
25 g = 0.025 kg

Next, plug the values into the formula:
λ = (6.626 x 10^-34 Js) / (0.025 kg * 5.0 m/s)

Calculate the wavelength:
λ = (6.626 x 10^-34 Js) / (0.125 kg*m/s)
λ = 5.3 x 10^-34 m

To know more about de-broglie wavelength:

https://brainly.com/question/16629783

#SPJ11

The formula for the lowest molecular weight chiral compound containing C, H, and possibly O, N, or S, with only one functional group as a nitrile is: C₂H₃N.

To form a chiral compound, we need at least one carbon atom with four different substituents. In this case, we have two carbon atoms: one as part of the nitrile functional group (-CN) and another as the chiral center.

The chiral carbon is bonded to the nitrile group, a hydrogen atom, and an implied third group, which in this case is another hydrogen atom.

The nitrile functional group consists of a carbon atom triple-bonded to a nitrogen atom. The chiral carbon atom is indicated with a wedged bond for the hydrogen atom to represent the stereochemistry of the molecule.

To know more about triple-bonded click on below link:

https://brainly.com/question/16888881#

#SPJ11

The pH-relevant equation is NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH-(aq).

The pH-relevant equation when NH4Br dissolves in water, given that the Kb of NH3 is 1.76 x 10^-5, is:

NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH-(aq)

Learn more about pH equation

brainly.com/question/16480786

#SPJ11

To calculate the number of molecules of O₂ required to make 1.44 g of KHCO₃, follow these steps:

1. Determine the molar mass of KHCO₃: K (39.10 g/mol) + H (1.01 g/mol) + C (12.01 g/mol) + 3 * O (3 * 16.00 g/mol) = 100.12 g/mol.

2. Calculate the moles of KHCO₃: (1.44 g KHCO₃) / (100.12 g/mol) = 0.0144 moles KHCO₃.

3. Write the balanced chemical equation for the reaction: 2 K + H₂O + CO₂ + 1/2 O₂ → KHCO₃ + KOH.

4. From the balanced equation, we can see that 1/2 mole of O₂ is required to produce 1 mole of KHCO₃. To find the moles of O₂ needed, multiply the moles of KHCO₃ by 1/2: (0.0144 moles KHCO₃) * (1/2) = 0.0072 moles O₂.

5. Convert the moles of O₂ to molecules using Avogadro's number (6.022 x 10²³ molecules/mol): (0.0072 moles O₂) * (6.022 x 10²³ molecules/mol) = 1.30 x 10²² molecules O₂.

So, 1.30 x 10²² molecules of O₂ are required to make 1.44 g of KHCO₃.

Learn more about Molecules at https://brainly.com/question/475709

#SPJ11

The independent variable in an experiment is the factor that is being manipulated or changed by the researcher.

In the context of the given question, the independent variable would be one of the four options: intensity of light, amount of CO2 produced, yeast concentration, or sugar source.

Based on the information provided, it is impossible to determine which of these options is the independent variable.

However, it is important to note that the dependent variable, or the factor being measured or observed, would be influenced by the independent variable.

Therefore, the researcher would need to carefully design the experiment and control all other variables to accurately determine the relationship between the independent and dependent variables.

learn more about researcher here:brainly.com/question/29783805

#SPJ11

The most stable compound is the second one (tropone). Aldehydes and ketones are organic compounds that contain a carbonyl functional group; a keton is any member of this family of organic compounds in which the carbon atom is covalently bound to an oxygen atom.

However, because the carbonyl pi link is thermodynamically considerably more stable than the alkene pi bond, the circumstances needed are quite different. Conditions must be forced for a carbonyl group to hydrogenate. Electronic causes ketones are less reactive than aldehydes because the two alkyl groups in ketones more effectively diminish the electrophilicity of the carbonyl carbon than they do in aldehydes.

To know more about ketones, click here:

https://brainly.com/question/4439718

#SPJ4

The balanced equation for the Fischer esterification of methyl 3-nitrobenzoate is:

3-nitrobenzoic acid + methanol + sulfuric acid --> methyl 3-nitrobenzoate + water

The balanced chemical equation is as follows:

[tex]C7H5NO4 + CH3OH + H2SO4 --> C8H7NO4CH3 + H2O[/tex]

In this reaction, 3-nitrobenzoic acid reacts with methanol in the presence of sulfuric acid as a catalyst to form methyl 3-nitrobenzoate and water. It is a classic example of an esterification reaction, where an alcohol and carboxylic acid react to form an ester and water.

Learn more about nitrobenzoate here:

https://brainly.com/question/30889218

#SPJ11

The equilibrium concentrations of all species are; [Ag⁺] = 0.191 M, [NH₃] = 1.34 × 10⁻³ M, and [Ag(NH₃)₂]+ = 0.0800 M.

Write the balanced equation for the reaction between AgNO₃ and NH₃;

Ag⁺ + 2NH₃ ⇌ [Ag(NH₃)₂]⁺

Calculate the initial moles of Ag⁺ and NH₃;

moles of Ag⁺ = 0.100 M × 0.0150 L = 1.50 × 10⁻³ moles

moles of NH₃ = 0.200 M × 0.00500 L = 1.00 × 10⁻³ moles

Determine which reactant is limiting;

Ag⁺ is in excess because there are more moles of Ag⁺ (1.50 × 10⁻³ moles) than NH₃ (1.00 × 10⁻³ moles).

Calculate the moles of Ag⁺ that react with NH₃;

moles of Ag⁺ that react = 2 × 1.00 × 10⁻³ moles = 2.00 × 10⁻³ moles

Calculate the moles of Ag⁺ and [Ag(NH₃)₂]⁺ at equilibrium;

moles of Ag⁺ = 1.50 × 10⁻³ - 2.00 × 10⁻³ = -0.50 × 10⁻³ moles (excess)

moles of [Ag(NH₃)₂]⁺ = 2.00 × 10⁻³ moles

Calculate the concentration of [Ag(NH₃)₂]⁺ at equilibrium;

[Ag(NH₃)₂]⁺ = moles of [Ag(NH₃)₂]⁺ / total volume of solution

= 2.00 × 10⁻³ moles / (15.0 mL + 5.00 mL) = 0.0800 M

Calculate the concentration of NH₃ at equilibrium using the Kb expression for NH₃;

Kb = Kw / Ka(NH₄⁺) = 1.0 × 10⁻¹⁴ / 5.6 × 10⁻¹⁰ = 1.8 × 10⁻⁵

[NH₃] × [H⁺] / [NH₄⁺] = Kb

[0.2 - x] × x / [x] = 1.8 × 10⁻⁵

x² = 1.8 × 10⁻⁵ × 0.2

x = 1.34 × 10⁻³ M

Calculate the concentration of Ag⁺ at equilibrium;

Kf = [Ag(NH₃)₂]+ / [Ag⁺] × [NH₃]²

1.7 × 10⁷ = 0.0800 / [Ag⁺] × (0.00134 M)²

[Ag⁺] = 0.191 M

Check the assumptions; We assumed that Ag⁺ was in excess initially, and this was confirmed by our calculations. We also assumed that the reaction went to completion, and this is reasonable given the very large value of Kf.

Therefore, the equilibrium concentrations of all species are;

[Ag⁺] = 0.191 M

[NH₃] = 1.34 × 10⁻³ M

[Ag(NH₃)₂]+ = 0.0800 M

To know more about equilibrium concentrations here

https://brainly.com/question/16645766

#SPJ4

The equilibrium concentrations of all species are; [Ag⁺] = 0.191 M, [NH₃] = 1.34 × 10⁻³ M, and [Ag(NH₃)₂]+ = 0.0800 M.

Write the balanced equation for the reaction between AgNO₃ and NH₃;

Ag⁺ + 2NH₃ ⇌ [Ag(NH₃)₂]⁺

Calculate the initial moles of Ag⁺ and NH₃;

moles of Ag⁺ = 0.100 M × 0.0150 L = 1.50 × 10⁻³ moles

moles of NH₃ = 0.200 M × 0.00500 L = 1.00 × 10⁻³ moles

Determine which reactant is limiting;

Ag⁺ is in excess because there are more moles of Ag⁺ (1.50 × 10⁻³ moles) than NH₃ (1.00 × 10⁻³ moles).

Calculate the moles of Ag⁺ that react with NH₃;

moles of Ag⁺ that react = 2 × 1.00 × 10⁻³ moles = 2.00 × 10⁻³ moles

Calculate the moles of Ag⁺ and [Ag(NH₃)₂]⁺ at equilibrium;

moles of Ag⁺ = 1.50 × 10⁻³ - 2.00 × 10⁻³ = -0.50 × 10⁻³ moles (excess)

moles of [Ag(NH₃)₂]⁺ = 2.00 × 10⁻³ moles

Calculate the concentration of [Ag(NH₃)₂]⁺ at equilibrium;

[Ag(NH₃)₂]⁺ = moles of [Ag(NH₃)₂]⁺ / total volume of solution

= 2.00 × 10⁻³ moles / (15.0 mL + 5.00 mL) = 0.0800 M

Calculate the concentration of NH₃ at equilibrium using the Kb expression for NH₃;

Kb = Kw / Ka(NH₄⁺) = 1.0 × 10⁻¹⁴ / 5.6 × 10⁻¹⁰ = 1.8 × 10⁻⁵

[NH₃] × [H⁺] / [NH₄⁺] = Kb

[0.2 - x] × x / [x] = 1.8 × 10⁻⁵

x² = 1.8 × 10⁻⁵ × 0.2

x = 1.34 × 10⁻³ M

Calculate the concentration of Ag⁺ at equilibrium;

Kf = [Ag(NH₃)₂]+ / [Ag⁺] × [NH₃]²

1.7 × 10⁷ = 0.0800 / [Ag⁺] × (0.00134 M)²

[Ag⁺] = 0.191 M

Check the assumptions; We assumed that Ag⁺ was in excess initially, and this was confirmed by our calculations. We also assumed that the reaction went to completion, and this is reasonable given the very large value of Kf.

Therefore, the equilibrium concentrations of all species are;

[Ag⁺] = 0.191 M

[NH₃] = 1.34 × 10⁻³ M

[Ag(NH₃)₂]+ = 0.0800 M

To know more about equilibrium concentrations here

https://brainly.com/question/16645766

#SPJ4

The change in pH after adding 0.15 mol of HCl to a 500 mL buffer containing 0.50 M NH₃ and 0.50 M NH₄Cl is -0.31.

To calculate the change in pH, follow these steps:

1. Calculate the initial pH using the Henderson-Hasselbalch equation: pH = pKa + log([A⁻]/[HA]). For NH₃, pKa = 14 - pKb = 9.26.

2. Find the initial moles of NH₃ and NH₄Cl: moles = Molarity × Volume. 0.50 M × 0.5 L = 0.25 mol each.

3. Determine the reaction between added HCl and NH₃: NH₃ + HCl → NH₄Cl. 0.15 mol HCl reacts with 0.15 mol NH₃, leaving 0.10 mol NH₃ and 0.40 mol NH₄Cl.

4. Recalculate the new concentrations: [NH₃] = 0.10 mol / 0.5 L = 0.20 M; [NH₄Cl] = 0.40 mol / 0.5 L = 0.80 M.

5. Calculate the new pH using the Henderson-Hasselbalch equation: pH = 9.26 + log(0.20/0.80) = 8.95.

6. Determine the change in pH: ΔpH = final pH - initial pH = 8.95 - 9.26 = -0.31.

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

The larger ice cubes require more heat from the water to melt. To transfer more heat from the water requires more time. Therefore, it takes longer for the larger ice cubes to melt.

Enzyme concentration, pH, Temperature would change the value of Vmax. Correct alternatives are b,c,d.

The maximum velocity (Vmax) of an enzyme-catalyzed reaction is the theoretical maximum rate at which the reaction can proceed, under conditions of saturating substrate concentration. Several factors can affect Vmax:

b. Enzyme concentration: Increasing the amount of enzyme will increase the Vmax of the reaction, as there will be more enzyme molecules available to catalyze the reaction.

c. pH: Changes in pH can affect the Vmax of enzymes by altering the ionization state of amino acid residues that participate in the catalytic reaction, and by changing the shape of the enzyme's active site.

d. Temperature: Changes in temperature can affect the Vmax of enzymes by altering the rate of the catalytic reaction, as well as by changing the shape and stability of the enzyme's active site.

a. Substrate concentration: Changes in substrate concentration affect the rate of the reaction, but they do not directly affect Vmax.

To know more about maximum velocity (Vmax) here:

https://brainly.com/question/30874421#

#SPJ11

The correct answer is (d) 1.96.

For a 90% confidence interval, we need to find the z-score that corresponds to the middle 90% of the standard normal distribution. This can be done using a z-table or calculator.

Using a z-table, we can find the z-score that corresponds to a tail area of 0.05 (half of the 10% not in the middle). This is 1.645. To get the z-score for the middle 90%, we can double this value to get 1.645 x 2 = 3.29. However, we only need half of this value to get the z-score for the middle 90% (since the other half is in the other tail). Therefore, zα/2 = 1.645/2 = 0.825.

Alternatively, we can use a calculator to directly find the z-score that corresponds to a 90% confidence interval. This is zα/2 = 1.96.

Learn more about confidence here:
https://brainly.com/question/29048041

#SPJ11

90% of 100.2 g, or 90.18 g, of calcium nitride was produced.

A chemical reaction is a process that changes one group of chemical constituents into another. As reactants are transformed into products, chemical bonds between atoms are formed and broken. Typically, this is an exothermic process that releases energy as heat or light.

Calcium nitride, also known as [tex]Ca_3N_2[/tex], is created by the interaction of calcium and nitrogen gas. The mass of calcium nitride that is produced when 56.6 g of calcium and 30.5 g of nitrogen gas are combined can be calculated using stoichiometry.

The reaction's balanced equation is as follows: [tex]3C_a+N_2- > Ca_3N_2[/tex]

Therefore, 3 moles of nitrogen are needed for every 1 mole of calcium. The following equation can be used to determine the moles of calcium

and nitrogen:

Moles of [tex]C_a[/tex] = 56.6 g / 40 g/mol = 1.415 mol

Moles of [tex]N_2[/tex] = 30.5 g / 28 g/mol = 1.089 mol

Since nitrogen is the limiting reagent and calcium and nitrogen have a mole ratio of 1.089:1.415, the following formula can be used to get the potential calcium nitride yield:

Theoretical yield = 1.089 mol × 92 g/mol = 100.2 g

The actual yield of calcium nitride is 90% of the theoretical yield because the reaction has a 90% yield. Therefore, 90% of 100.2 g, or 90.18 g, of calcium nitride was produced.

To know more about chemical reaction, click-

brainly.com/question/25769000

#SPJ1

Answer: 0.10 moles of N2 are produced.

Explanation: You can find the number of moles of N2 produced from 0.080 moles of NH3 by doing mole ratios.

Since 5 moles of N2 is being produced for 4 moles of NH3, you can do

(0.080 moles of NH3 x 5 moles of N2) and then divide the number you get by 4 moles of NH3.

(0.080 x 5 moles)/4 = 0.10

Since 0.080 has 2 significant figures, your final answer also needs to have 2 sig figs.

Therefore, the pH of the resulting solution is approximately 11.32.

The pH of the resulting solution, we need to find the moles of HCl and Ca(OH)₂ in the solution.

Moles HCl = (0.250 mol/L) x (0.0560 L) = 0.0140 mol

Moles Ca(OH)₂ = (0.150 mol/L) x (0.0400 L) = 0.00600 mol

Since HCl is a strong acid and Ca(OH)₂ is a strong base, they will react completely in a 1:2 ratio to form CaCl₂ and water:

2HCl + Ca(OH)₂ → CaCl₂ + 2H₂O

So, all of the HCl will react with twice as much Ca(OH)₂ to form CaCl₂, leaving behind 0.00200 mol of Ca(OH)₂ in solution.

Next, we can find the concentration of hydroxide ions in the solution:

[OH⁻] = (0.00200 mol) / (0.0960 L) = 0.0208 M

Finally, we can use the Kw expression to find the concentration of hydrogen ions:

Kw = [H⁺][OH⁻] = 1.0 x 10⁻¹⁴

[H⁺] = Kw / [OH⁻] = (1.0 x 10⁻¹⁴) / (0.0208 M) = 4.81 x 10⁻¹²

Learn more about ph Visit: brainly.com/question/26424076

#SPJ4

The resulting saturated solution has ph = 9.00. Then the Ksp of Mg(OH)2 is 1.0 * 10^{-20}.

To solve this problem, we need to use the equilibrium expression for the dissolution of Mg(OH)2 in water:
Mg(OH)2(s) ⇌ Mg2+(aq) + 2OH-(aq)
The Ksp expression for this reaction is:
Ksp = [Mg2+][OH-]^{2}
We are given that excess solid Mg(OH)2 is shaken with 1.00 L of 1.0 M NH4Cl solution. This means that NH4Cl is a spectator ion and does not affect the equilibrium. Therefore, we can assume that the concentration of Mg2+ and OH- ions in the saturated solution is equal to the solubility of Mg(OH)2.
To calculate the solubility, we need to use the pH of the solution. We know that pH = 9.00, which means [H+] = 1.0 x 10^-9 M. Since Mg(OH)2 is a strong base, it will react with water to produce OH- ions:
Mg(OH)2(s) + 2H2O(l) ⇌ Mg2+(aq) + 2OH-(aq) + 2H2O(l)
The concentration of OH- ions can be calculated using the pH:
pH = -log[H+]
9.00 = -log[H+]
[H+] = 1.0 * 10^{-9} M
[OH-] = \frac{Kw}{[H+]} =\frac{ 1.0 * 10^{-14} M}{ 1.0 * 10^{-9} M} = 1.0 * 10^{-5} M
Since Mg(OH)2 dissociates to produce two OH- ions, the concentration of Mg(OH)2 in the saturated solution is:
[Mg(OH)2] = [OH-]^{2 }= (1.0 * 10^{-5} M)^{2} = 1.0 * 10^{-10} M
Finally, we can calculate the Ksp of Mg(OH)2 using the solubility:
Ksp = [Mg2+][OH-]^2
Ksp = (1.0 * 10^{-10} M)(1.0 *10^{-5} M)^{2}
Ksp = 1.0 * 10^{-20}
Therefore, the Ksp of Mg(OH)2 is 1.0 * 10^{-20}.

learn more about equilibrium Refer: https://brainly.com/question/30694482

#SPJ11

The type of reactive intermediate formed in the reaction of an alkene with Br2 and H2O to give a bromohydrin is a cyclic bromonium ion. This is because the Br2 adds across the double bond of the alkene to form a three-membered ring intermediate that has a positive charge on the bromine atom.

This cyclic bromonium ion then undergoes attack by water to give the final product, a bromohydrin. Neither a carbanion nor a carbocation is involved in this reaction, and a radical intermediate is also not formed.
In the reaction of an alkene with Br2 and H2O to form a bromohydrin, the reactive intermediate that is formed is a cyclic bromonium ion.

An alkene is a hydrocarbon compound that contains a carbon-carbon double bond in its molecular structure. Alkenes are unsaturated compounds, which means that they have fewer hydrogen atoms than their corresponding alkane (saturated hydrocarbon) counterparts. They have the general formula of CnH2n, where n is the number of carbon atoms in the molecule.

Alkenes are important in organic chemistry because they undergo a variety of reactions, such as addition reactions, oxidation reactions, and polymerization reactions. They are commonly used in the production of polymers, plastics, and solvents. Some examples of common alkenes include ethene (C2H4), propene (C3H6), and butene (C4H8).

Visit here to learn more about alkene brainly.com/question/31033378
#SPJ11

a. The advantage of not adding an organic solvent during extraction is that it simplifies the procedure and reduces potential contamination or side reactions. b. The disadvantage of not using a solvent to rinse the reaction flask during the transfer to the separatory funnel is that some product may be left behind in the flask, leading to incomplete transfer and a lower yield.

a. The advantage of not adding an organic solvent as an organic layer during extraction is that it reduces the use of harmful solvents and makes the process more environmentally friendly. If the reaction was conducted at 1/50 of the scale of this procedure, it would still be advantageous to not use an organic solvent as it would still reduce the amount of waste generated and lower the environmental impact of the process. However, if the scale of the procedure is decreased, the yield of the extraction may decrease as well, making it less efficient.

b. The disadvantage of not using a solvent to rinse your reaction flask in the transfer to the separatory funnel is that it may leave residual product in the flask, leading to a lower yield of the desired compound. It may also contaminate the final product with impurities, affecting its purity and quality. Therefore, it is important to rinse the reaction flask thoroughly with a suitable solvent to ensure that all of the desired product is transferred to the separatory funnel for extraction.

Learn more about organic solvent here: brainly.com/question/31325351

#SPJ11

The second step of the aldol reaction using ethanal and dilute aq NaOH involves the nucleophilic attack of the enolate ion on the carbonyl carbon of another ethanal molecule, forming a new C-C bond and an alkoxide ion.

In the aldol reaction, the first step is the formation of the enolate ion by the deprotonation of the alpha hydrogen of ethanal by NaOH. In the second step, the enolate ion acts as a nucleophile and attacks the electrophilic carbonyl carbon of another ethanal molecule.

The curved arrow originates from the negatively charged oxygen of the enolate ion and points towards the carbonyl carbon, indicating the movement of the electron pair.

As a result, the double bond between the carbonyl carbon and oxygen shifts to form a bond with the oxygen, creating an alkoxide ion. The new C-C bond and alkoxide ion ultimately lead to the formation of the aldol product.

To know more about nucleophilic attack click on below link:

https://brainly.com/question/31279781#

#SPJ11

The concentration of KMnO₄ required to establish a concentration of 2.0 × 10⁻⁸ M for Ba²⁺ ion in solution is 4.0 × 10⁻⁸ M.

To determine the concentration of KMnO₄ required to establish a concentration of Ba²⁺ ion in solution, we need to use the balanced chemical equation between KMnO₄ and Ba²⁺.

2 KMnO₄ + BaCl₂ → 2 KCl + 2 MnO₂ + Ba(OH)₂

From this equation, we can see that 2 moles of KMnO₄ reacts with 1 mole of Ba²⁺. Therefore, we can set up the following equation to find the concentration of KMnO₄ required;

2 moles of KMnO₄ / 1 mole of Ba²⁺ = concentration of KMnO₄ / 2.0 × 10⁻⁸ M

Simplifying this equation, we get;

concentration of KMnO₄ = 2 × 2.0 × 10⁻⁸ M

= 4.0 × 10⁻⁸ M

Therefore, the concentration of kmno4 is 4.0 × 10⁻⁸ M

To know more about concentration here

https://brainly.com/question/10725862

#SPJ4

The density of nitrogen gas at 1.98 atm and 74.5°C is approximately 1.946 g/L.

To find the density of nitrogen gas at 1.98 atm and 74.5°C, we can use the Ideal Gas Law equation, which is PV = nRT. We will modify this equation to find the density (ρ) by using the formula: ρ = (PM)/(RT), where P is pressure, M is molar mass, R is the gas constant, and T is temperature.

1. Convert temperature to Kelvin:
T (K) = 74.5°C + 273.15 = 347.65 K

2. Use the values given in the problem and the constants:
P = 1.98 atm
M (molar mass of nitrogen, N₂) = 28.02 g/mol
R (gas constant) = 0.0821 L atm / (K mol)

3. Plug the values into the density formula:
ρ = (PM)/(RT) = (1.98 atm * 28.02 g/mol) / (0.0821 L atm / (K mol) * 347.65 K)

4. Calculate the density:
ρ = (55.476 g/mol) / (28.5093 L/mol) = 1.946 g/L

The density of nitrogen gas at 1.98 atm and 74.5°C is approximately 1.946 g/L.

Know more about Density here:

https://brainly.com/question/28929608

#SPJ11

The activity series for Copper, Lead, and Zinc in order of decreasing reactivity (most active to least active) is:

Zinc > Copper > Lead

This means that Zinc will displace Copper and Lead from their salts in solution, Copper will displace Lead but not Zinc, and Lead will not displace either Copper or Zinc.

The activity series is a list of metals and their ions in order of their relative reactivity with each other. The most reactive metal is at the top of the list and the least reactive metal is at the bottom of the list.

This series helps to predict the outcome of a chemical reaction between two metals or their ions. When a metal is placed in a solution containing ions of another metal, the metal with a higher position in the activity series will replace the metal with a lower position in the activity series.

Visit here to learn more about activity series brainly.com/question/14129976

#SPJ11

The balanced equation with the smallest whole-number coefficients is Al2(SO4)3 + 3Ca(OH)2 → 2Al(OH)3 + 3CaSO4. Therefore, the coefficient in front of the CaSO4 when the equation is completely balanced with the smallest whole-number coefficients is 3 (option C).

To determine the coefficient in front of the CaSO4 when the given unbalanced equation Al2(SO4)3 + Ca(OH)2 → Al(OH)3 + CaSO4 is completely balanced with the smallest whole-number coefficients, follow these steps:

See more about equation in:

https://brainly.com/question/2972832

#SPJ11