an alkali metal (a) and a halide (b) form the salt ab. write the chemical equation for ab dissolving in water.

Explanation:

4. x 10^-5      the -5  exponent means move the decimal point FIVE spaces to the LEFT

     = .00004

The temperature of a reaction with k = 1.20 x 10⁻⁶ and ∆G° = 24.90 kJ/mol is 204.25 K.

To determine the temperature, use the equation: ∆G° = -RT ln(k), where ∆G° is the standard Gibbs free energy change, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin, and k is the reaction's equilibrium constant.

First, convert ∆G° to J/mol: 24.90 kJ/mol × 1000 = 24,900 J/mol. Next, rearrange the equation to solve for T: T = -∆G° / (R ln(k)). Finally, plug in the values: T = -24,900 / (8.314 × ln(1.20 x 10⁻⁶)) ≈ 204.25 K. The temperature of the reaction is approximately 204.25 K.

To know more about Gibbs free energy click on below link:

https://brainly.com/question/13318988#

#SPJ11

NaOH is not a good choice as a base in this reaction because it is a strong base and can lead to undesirable side reactions.

Strong bases like NaOH can deprotonate more acidic protons present in the reactants or solvents, causing unwanted by-products and decreased yields. Additionally, strong bases like NaOH can be difficult to control, potentially causing the reaction to proceed too quickly or uncontrollably, which could result in incomplete conversion of the reactants or damage to the desired product.

In contrast, using a weaker base would allow for better control of the reaction, minimizing side reactions and ensuring higher yields of the desired product. Therefore, it is crucial to select a suitable base for a particular reaction, taking into account the strength and potential side effects of the base, and NaOH may not be the optimal choice in this specific case. NaOH is not a good choice as a base in this reaction because it is a strong base and can lead to undesirable side reactions.

Learn more about weaker base at:

https://brainly.com/question/428501

#SPJ11

For a particular process that is carried out at constant pressure, q = 145 KJ and w = -35 KJ. Therefore using thermodynamics ΔE = 110 kJ and ΔH = 145 kJ, option B.

The first rule of thermodynamics states that although energy cannot be generated or destroyed, it may be changed from one form to another. The first law of thermodynamics' mathematical formulation reveals the relationship between internal energy, heat transmitted, and work accomplished.

The study of heat transfers, a system's ability to create work, and the conversion of energy falls within the purview of thermodynamics. In contrast to systems containing atoms or molecules, systems containing particles are the focus of study in this field.

The principles of thermodynamics may be used to explain all of this, and they are based on observations of the aforementioned systems at an equilibrium rather than on theoretical research.

According to the first law of thermodynamics,

ΔE = q + w

= 145 + (-35)

ΔE = 110 kJ.

Also, at constant pressure, ΔH is equal to the heat transferred (q).

So, ΔH = q = 145 kJ.

Learn more about Thermodynamics:

https://brainly.com/question/13059309

#SPJ4

pH of the solution is 1.54. The correct alternative is A.

The Ka expression for nitrous acid is:

Ka = [H⁺][NO₂⁻] / [HNO₂]

Let x be the concentration of H⁺ and NO₂⁻ ions that are formed in the dissociation of nitrous acid, and assume that the initial concentration of nitrous acid is 2.00 M. Then, the equilibrium concentrations will be:

[HNO₂] = 2.00 - x

[H⁺] = x

[NO₂⁻] = x

Substituting these values into the Ka expression and solving for x:

Ka = [H⁺][NO₂⁻] / [HNO]

4.5 x 10⁻⁴ = x² / (2.00 - x)

This equation can be simplified using the approximation that x << 2.00:

4.5 x 10⁻⁴ = x² / 2.00

x² = 9 x 10⁻⁴

x = 3 x 10⁻₂

Therefore, [H+] = 3 x 10⁻² M, and the pH of the solution is:

pH = -log[H⁺]

pH = -log(3 x 10⁻²)

pH ≈ 1.52

Therefore, the correct answer is A. 1.54.

To know more about pH is:
https://brainly.com/question/491373#

#SPJ11

An expression in chemistry that can be used to prepare buffer solutions is the Henderson-Hasselbalch equation.

The Henderson-Hasselbalch equation can be used to calculate the pH of a solution that contains a weak acid and its conjugate base, or a weak base and its conjugate acid. It is used when you have a buffer solution, which is a solution that can resist changes in pH when small amounts of acid or base are added. The Henderson-Hasselbalch equation allows you to calculate the pH of a buffer solution based on the concentration of the weak acid or base, the concentration of its conjugate base or acid, and the dissociation constant of the weak acid or base.

The Henderson-Hasselbalch equation is a chemical expression that can be used to determine an acid-base ratio in order to compute the pH of a buffer or to determine the acid and base concentrations required for a certain pH.

Learn more about Henderson-Hasselbalch equation here

https://brainly.com/question/13423434

#SPJ11

To solve this problem, we can use the Henderson-Hasselbalch equation for a buffer solution the pH of the buffer solution after 0.180 mol of NaOH is added is 8.59.

The concentration of a solution refers to the amount of solute dissolved in a given amount of solvent or solution. Solutions can be diluted by adding more solvent or concentrated by removing some of the solvent. The properties of a solution, such as its boiling point or freezing point, may differ from those of the pure solvent due to the presence of the solute.

A solvent is a substance that has the ability to dissolve other substances to form a homogeneous mixture called a solution. In a solution, the solvent is the component that is present in the largest amount and is responsible for dissolving the solute

To know more about solution visit :

https://brainly.com/question/30665317

#SPJ1

The thermal energy in a polystyrene cup, or any object for that matter, is stored in the kinetic energy of its particles. When a hot object, such as a cup of hot liquid, is left to cool down to room temperature, the thermal energy stored in the cup decreases as the particles collide less frequently.

As the cup and its contents cool, the particles within the cup begin to lose kinetic energy as they collide with each other and with the surrounding environment. As the particles lose energy, they move more slowly, which in turn decreases the amount of thermal energy stored in the cup.

Eventually, the cup and its contents reach a state of thermal equilibrium with the surrounding environment, meaning that they have reached the same temperature as their surroundings. At this point, the thermal energy stored in the cup has been completely transferred to the environment, and the cup is said to be at room temperature.

Overall, the decrease in thermal energy in a polystyrene cup when it cools down to room temperature is a result of the transfer of kinetic energy from the particles within the cup to the particles in the surrounding environment, through collisions and other forms of energy transfer.

-

Answer:

When a polystyrene cup cools down to room temperature, it means that the thermal energy in the cup has been transferred to its surroundings until thermal equilibrium is reached. Thermal energy transfer can occur through conduction, convection, and radiation. Conduction involves molecules transferring kinetic energy to one another through collisions. In this case, the thermal energy from the cup is transferred to the air molecules around it through collisions until both the cup and its surroundings reach the same temperature.

Explanation:

Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat is the flow of thermal energy. When two objects or systems are at different temperatures, heat will flow from the hotter object to the cooler one until both objects reach the same temperature. This state is called thermal equilibrium.

There are three ways that heat can be transferred: conduction, convection, and radiation. Conduction is the transfer of heat through direct contact between particles of a substance without moving the particles to a new location. This happens when molecules collide with each other and transfer their kinetic energy. For example, when you touch a hot pan on the stove, heat is transferred from the pan to your hand through conduction.

Convection occurs when hot air rises, allowing cooler air to come in and be heated. This creates a cycle where hot air rises and cool air sinks, creating a current that transfers heat. For example, when you boil water on the stove, the heat from the stove heats the water at the bottom of the pot. This hot water rises to the top and cooler water sinks to the bottom to be heated, creating a convection current that transfers heat throughout the pot.

Radiation is the transfer of heat through electromagnetic waves. This can happen even in a vacuum where there are no particles to transfer heat through conduction or convection. For example, when you stand in front of a fire, you can feel the heat even though you are not touching it. This is because heat is being transferred to you through radiation.

In the case of a polystyrene cup cooling down to room temperature, heat is transferred from the cup to its surroundings through conduction until thermal equilibrium is reached and both the cup and its surroundings are at the same temperature.

The correct statement is C)  A buffer forms when a conjugate weak acid/weak base pair are mixed together.

A buffer is a solution that resists changes in pH when small amounts of acid or base are added to it. It is made up of a weak acid and its conjugate base, or a weak base and its conjugate acid. When a strong acid or strong base is added to a solution, it can completely ionize and change the pH significantly, which is why they cannot form a buffer. However, when a weak acid is mixed with a weak base, they can form a conjugate acid-base pair and act as a buffer solution.

Learn more about conjugate acid here:

https://brainly.com/question/31229565

#SPJ11

The halogens ranked from least active to most active are: At, I, Br, Cl, and F.

To rank halogens in order from least active to most active, follow these steps:

1. Recall that halogens are elements in Group 17 (VIIA) of the periodic table, which includes fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At).

2. Understand that the reactivity of halogens decreases as you move down the group. This is due to the increasing atomic size and decreasing electronegativity, making it more difficult for the atom to attract and gain electrons.

3. Arrange the halogens from least active to most active, based on their position in the periodic table, starting from the bottom and moving upward:

Least active: Astatine (At) → Iodine (I) → Bromine (Br) → Chlorine (Cl) → Most active: Fluorine (F)

Know more about halogens - brainly.com/question/1450671

#SPJ11

The main differences in the IR spectra between 3,3-dimethyl-2-butanone and 2,3-dimethylbut-3-en-2-ol are due to the presence of carbonyl absorption in the former and hydroxyl and alkene absorptions in the latter, which can be used to differentiate them based on their functional groups.

For 3,3-dimethyl-2-butanone, the major absorbance bands in the IR spectra would be:
1. Carbonyl (C=O) stretching: around 1700 cm⁻¹
2. C-H stretching for methyl and methylene groups: 2850-3000 cm⁻¹
3. C-H bending for methyl groups: around 1375 cm⁻¹

For 2,3-dimethylbut-3-en-2-ol, the major absorbance bands in the IR spectra would be:
1. Hydroxyl (O-H) stretching: around 3200-3600 cm⁻¹ (broad)
2. C=C stretching for alkene: around 1650 cm⁻¹
3. C-H stretching for methyl, methylene, and alkene groups: 2850-3100 cm⁻¹
4. C-H bending for methyl groups: around 1375 cm⁻¹

The differences in the IR spectra between these two compounds would mainly be the presence of the carbonyl absorption in 3,3-dimethyl-2-butanone and the hydroxyl and alkene absorptions in 2,3-dimethylbut-3-en-2-ol. These differences help in distinguishing the two compounds based on their functional groups.

To know more about IR spectra click here:

https://brainly.com/question/30465075

#SPJ11

The balloon must be heated to a temperature of approximately: 423 K in order to have a volume of 6.00 L.

To find the temperature to which a balloon must be heated, initially at 9°C and 4.00 L, in order to have a volume of 6.00 L, we can use the combined gas law. The combined gas law is given by:
(P1 * V1) / T1 = (P2 * V2) / T2

Since pressure (P) remains constant in this problem, we can remove it from the equation and use Charles's Law:
V1 / T1 = V2 / T2

First, convert the initial temperature from Celsius to Kelvin:
T1 = 9°C + 273.15 = 282.15 K

Next, plug in the values for V1, T1, and V2:
(4.00 L) / (282.15 K) = (6.00 L) / T2

Now, solve for T2:
T2 = (6.00 L * 282.15 K) / 4.00 L = 423.225 K

Since the given options are in whole numbers, round the answer:
T2 ≈ 423 K

To know more about "Charles's Law" refer here:

https://brainly.com/question/16927784#

#SPJ11

The reaction between alkaline phosphatase and pnpp (p-nitrophenyl phosphate) is a commonly used assay in biochemistry. Alkaline phosphatase is an enzyme that hydrolyzes phosphomonoesters and releases inorganic phosphate.

Pnpp is a synthetic substrate that is hydrolyzed by alkaline phosphatase to form p-nitrophenol and inorganic phosphate. This reaction can be measured spectrophotometrically at a wavelength of 405 nm, where the intensity of the yellow color of p-nitrophenol is directly proportional to the amount of alkaline phosphatase activity. This assay is widely used in clinical diagnostics and in research laboratories to measure alkaline phosphatase activity in various biological samples.

To know more about the synthetic substrate:

https://brainly.com/question/31249295

#SPJ11

The reduction potential for this half-reaction at pH = 5.00 can be calculated using the Nernst equation:

E = E° - (0.0592/n) x log([Mn²+][H₂O]⁴/[MnO4][H+]⁸)

where E° is the standard reduction potential, n is the number of electrons transferred in the half-reaction (5 in this case), [Mn²+] and [H₂O] are the concentrations of the products, and [MnO4] and [H+] are the concentrations of the reactants.

At pH = 5.00, the concentration of H+ is 10⁻⁵ M. Assuming the concentration of Mn²+ and H₂O are both 1 M, we can calculate:

E = 1.51 V - (0.0592/5) x log([1][1⁴]/[1][10⁻⁵]⁸) E = 1.51 V - (0.0592/5) x log(10¹⁶) E = 1.51 V - 2.01 V E = -0.50 V Therefore, the reduction potential for this half-reaction at pH = 5.00 is -0.50 V, which is option (D).

Learn more about standard reduction potential at

https://brainly.com/question/30904774

#SPJ11

The method for determining the pH of a weak base solution is the same as that of the weak acid in the sample problem. However, the hydroxide ion concentration will be represented by the variable.

List the known values in Step 1 and make a plan for the issue.

Solve the problem in step two. HNO2H+NO−2Initial2.0000Change−x+x+xEquilibrium2.00−xxx.

Step 3: Consider your outcome. A strong acid solution at 2.00M would have a pH of log(2.00)=0.30.

The negative logarithm is used to calculate the pOH, which is then used to subtract from 14 to calculate the pH. Because weak acids do not dissociate, the value of (C - x) will be nearly equal to C. pH = - (-3.09) = 3.09 as a result. This is a rather straightforward way for figuring out the pH of the weak acid. The difference between the two answers is only about 0.02, which is negligible.

To know more about weak base, click here:

https://brainly.com/question/22104949

#SPJ4

Answer:

The four different types of organic molecules in living organisms are carbohydrates, lipids, proteins, and nucleic acids. Carbohydrates are composed of carbon, hydrogen, and oxygen atoms and are a source of energy for the body. Lipids are composed of carbon, hydrogen, and oxygen atoms and are important for energy storage, insulation, and cell membrane structure. Proteins are composed of amino acids and are involved in various biological functions, such as enzyme catalysis, muscle contraction, and immune response. Nucleic acids are composed of nucleotides and store genetic information. All four types of organic molecules are essential for life and work together to maintain biological processes.

Consider the reaction: Sn(s) + 4HNO3(aq) → SnO2(s) + 4NO2(g) + 2H2O(g). In this balanced chemical reaction, solid tin (Sn) reacts with aqueous nitric acid (HNO3) to produce solid tin(IV) oxide (SnO2), gaseous nitrogen dioxide (NO2), and gaseous water (H2O).

The given reaction is a redox reaction, where the tin (Sn) metal is being oxidized and the nitric acid (HNO3) is being reduced.

When considering this reaction, it is important to note that it is exothermic, meaning it releases heat energy. Additionally, the products of the reaction are a solid (SNO2), a gas (NO2), and water vapor (H2O).

It is also worth noting that this reaction is not balanced - there are different numbers of atoms on the reactant and product sides of the equation. Therefore, it would need to be balanced before any calculations or further analysis could be done.

Learn more about reaction here:

https://brainly.com/question/30115256

#SPJ11

To calculate the volume of water added to the 0.510 L of 0.0440 M sodium hydroxide to obtain a 0.0260 M solution, follow these steps:

1. Determine the initial moles of sodium hydroxide in the solution:
Moles = Molarity x Volume
Moles = 0.0440 mol/L x 0.510 L = 0.02244 mol

2. Determine the final volume needed to obtain a 0.0260 M solution:
Volume = Moles / Molarity
Volume = 0.02244 mol / 0.0260 mol/L = 0.863 L

3. Since volumes are additive at these low concentrations, calculate the volume of water added:
Volume of water added = Final volume - Initial volume
Volume of water added = 0.863 L - 0.510 L = 0.353 L

Therefore, you need to add 0.353 L of water to the 0.510 L of 0.0440 M sodium hydroxide to obtain a 0.0260 M solution.

https://brainly.com/question/31485541

#SPJ11

The pH during the titration of 30.00 mL of 0.1000 M methylamine having 0.1000 M HCl after 22 mL of the acid have been added is 3.54.

To determine the pH during the titration of a weak base with a strong acid, we need to find the moles of base initially present and the moles of acid added. Then, we use the balanced chemical equation to determine the moles of acid and base that react, and we use the equilibrium expression for the weak base to determine the concentration of the hydroxide ions present in solution.

Determine the moles of methylamine initially present;

moles of methylamine = (30.00 mL)(0.1000 M) = 0.00300 mol

Determine the moles of HCl added;

moles of HCl = (22.00 mL)(0.1000 M) = 0.00220 mol

Determine the limiting reagent and the moles of base that react;

HCl is the limiting reagent because it is added in a smaller amount. The moles of base that react are equal to the moles of HCl added.

Determine the concentration of methylammonium ion at equilibrium;

(CH₃)NH₃⁺ + H₂O ⇌ (CH₃)NH₂ + H₃O⁺

Kb = [CH₃NH₂][H₃O⁺] / [CH₃NH₃⁺]

At equilibrium, [CH₃NH₂] = 0.00300 - 0.00220 = 0.00080 M

[CH₃NH₃⁺] = [HCl] = 0.00220 M

Kb = (0.00080)(x) / 0.00220

x = [H₃O⁺] = 2.91 x 10⁻⁴ M

Determine the pH;

pH = -log[H₃O⁺]

= -log(2.91 x 10⁻⁴)

= 3.54

To know more about titration here

https://brainly.com/question/2728613

#SPJ4

The product for the given reaction sequence would be: 3,4-dimethyl-7-nonanol.

The first reaction involves the conversion of 6,7-dimethyl-3-nonanol to 6,7-dimethyl-3-nonanone using PBr3 and then further oxidizing it to 6,7-dimethyl-3-nonanal using PCC.

In the second step, the resulting 6,7-dimethyl-3-nonanal is treated with H3O+ to form the final product, that is:

3,4-dimethyl-7-nonanol.

Based on the reaction sequence provided, the product for this reaction is 6,7-dimethyl-3-nonanone.

The initial reaction involves PBr3 to replace the OH group with a Br, then Mg/ether forms a Grignard reagent, followed by the addition of H30+ to protonate the oxygen, and finally, PCC oxidizes the alcohol to a ketone.

To know more about Grignard reagent: brainly.com/question/28188958

#SPJ11

The product for the given reaction sequence would be: 3,4-dimethyl-7-nonanol.

The first reaction involves the conversion of 6,7-dimethyl-3-nonanol to 6,7-dimethyl-3-nonanone using PBr3 and then further oxidizing it to 6,7-dimethyl-3-nonanal using PCC.

In the second step, the resulting 6,7-dimethyl-3-nonanal is treated with H3O+ to form the final product, that is:

3,4-dimethyl-7-nonanol.

Based on the reaction sequence provided, the product for this reaction is 6,7-dimethyl-3-nonanone.

The initial reaction involves PBr3 to replace the OH group with a Br, then Mg/ether forms a Grignard reagent, followed by the addition of H30+ to protonate the oxygen, and finally, PCC oxidizes the alcohol to a ketone.

To know more about Grignard reagent: brainly.com/question/28188958

#SPJ11

The isomer 1-methylcyclohexene is predicted to be formed in greater amounts. The reason is that the more stable, lower energy alkene isomer is the one that has the higher degree of substitution.

The isomer predicted to be formed in greater amounts is 1-methylcyclohexane. The reason for this is that it has a higher degree of substitution compared to 3-methylcyclohexene, which makes it more stable and lower in energy. This is because 1-methylcyclohexane has a substituent (methyl group) attached to the primary carbon, while 3-methylcyclohexene has a substituent attached to a secondary carbon. Therefore, the higher degree of substitution in 1-methylcyclohexane makes it the more stable isomer.

Learn more about isomer here: brainly.com/question/12796779

#SPJ11

a. The angular speed (in rad/s) of the car is: ω = v / r.

b. The magnitude: a = [tex]v^2[/tex] / r (in m/s2) and direction of the car's acceleration is towards the: center of the circular path.

To answer your question, we will know how to calculate the angular speed and the magnitude and direction of the car's acceleration using the given terms.

a) To find the angular speed (ω) of the car in rad/s, you can use the formula:
ω = v / r
where v is the linear speed of the car (in m/s) and
r is the radius of the circular path (in meters).

b) To find the magnitude of the car's acceleration (a), you can use the formula:
a = [tex]v^2[/tex] / r

The direction of the car's acceleration is towards the center of the circular path, also known as centripetal acceleration.

To know more about "Centripetal acceleration" refer here:

https://brainly.com/question/18695728#

#SPJ11

To synthesize phenylacetic acid (C₆H₅CH₂CO₂H) and m-nitrobenzoic acid from benzene, you would follow these steps:

For phenylacetic acid:
1. Perform Friedel-Crafts alkylation on benzene using ethyl chloride and aluminum chloride as catalyst to form ethylbenzene.
2. Oxidize ethylbenzene using potassium permanganate (KMnO₄) to obtain phenylacetic acid.

For m-nitrobenzoic acid:
1. Nitrate benzene with a mixture of concentrated nitric acid (HNO₃) and concentrated sulfuric acid (H₂SO₄) to form nitrobenzene.
2. Perform Friedel-Crafts acylation using acetyl chloride and aluminum chloride as catalyst to obtain m-nitroacetophenone.
3. Hydrolyze m-nitroacetophenone using aqueous potassium hydroxide (KOH) to form m-nitrobenzoic acid.

In summary, synthesize phenylacetic acid and m-nitrobenzoic acid from benzene through Friedel-Crafts reactions, followed by oxidation and hydrolysis, respectively.

To know more about Friedel-Crafts alkylation click on below link:

https://brainly.com/question/30884625#

#SPJ11

The pH of the 0.045 M aqueous solution of the acid HA is approximately 4.53.

To calculate the pH of a 0.045 M aqueous solution of an acid (HA) with an ionization constant (Ka) of 1.93 x 10^-7, we can use the following formula:
pH = -log10[H+]
First, we need to find the concentration of hydrogen ions (H+). Since HA is a weak acid, we can set up an equilibrium expression using Ka:
Ka = [H+][A-]/[HA]
1.93 x 10^-7 = (x)(x)/(0.045 - x)
Assuming x is much smaller than 0.045, we can simplify the equation:
1.93 x 10^-7 ≈ x^2/0.045
Now, solve for x:
x^2 = (1.93 x 10^-7)(0.045)
x^2 = 8.685 x 10^-9
x = 2.95 x 10^-5 M (concentration of H+)
Finally, calculate the pH:
pH = -log10(2.95 x 10^-5)
pH ≈ 4.53 (rounded to two sig figs)

Learn more about acid HA  here:

https://brainly.com/question/9207964

#SPJ11

c. Isocitrate dehydrogenase is a citric acid cycle enzyme that is also an example of an iron-sulfur protein.

This enzyme plays a crucial role in cellular respiration by catalyzing the conversion of isocitrate to alpha-ketoglutarate. It is also an example of an iron-sulfur protein because it contains a cluster of iron and sulfur atoms in its active site, which are essential for its catalytic activity. This enzyme is found in both prokaryotes and eukaryotes and is regulated by various factors such as substrate availability, pH, and allosteric modulators.

Mutations in the genes encoding for isocitrate dehydrogenase have been linked to various diseases such as cancer and neurodegenerative disorders. Overall, isocitrate dehydrogenase plays a vital role in energy metabolism and is an excellent example of the complex interplay between protein structure, function, and regulation in biological systems. c. Isocitrate dehydrogenase is a citric acid cycle enzyme that is also an example of an iron-sulfur protein.

Learn more about enzyme at:

https://brainly.com/question/29774898

#SPJ11

The collagen coiled coil is 145.7 in size for a section of 100 residues. A polypeptide chain called -keratin creates a right-handed -helix and is often rich in alanine, leucine, arginine, and cysteine.

100 residues x (1 helical turn/3.6 residues) = 27.78 helical turns; 5.4A per helical turn; multiplied by 27.78 helical turns; equals 142A. A coiled coil is made up of two of these polypeptide chains that twist together to produce a left-handed helical structure.The surface of a protein is more likely to have gln. A protein's surface is less likely to contain ser. The midsection of a helix is less likely to include Lle.Serine would be outer because it is an uncharged polar atom.The three charged residues (Lys, Glu, and Arg) in peptide C are most likely to align on one face of an alpha helix.

To know more about coiled coil, click here:

https://brainly.com/question/31309522

#SPJ4

There are [tex]3.757 * 10^{25}[/tex] oxygen atoms in 5.20 moles of at are calculated using Avogadro's number.

To find the number of oxygen atoms in 5.20 mol of [tex]Al_2(SO_4)_3[/tex], follow these steps:

1. Identify the number of oxygen atoms in one molecule of [tex]Al_2(SO_4)_3[/tex].

The formula shows that there are 3 [tex]SO_4[/tex] units, each containing 4 oxygen atoms: 3 x 4 = 12 oxygen atoms per molecule.

2. Calculate the total number of molecules in 5.20 mol of [tex]Al_2(SO_4)_3[/tex].

Use Avogadro's number ([tex]6.022 * 10^{23}[/tex] molecules/mol):

5.20 mol * ([tex]6.022 * 10^{23}[/tex] molecules/mol) = [tex]3.131 * 10^{24}[/tex] molecules.

3. Find the total number of oxygen atoms by multiplying the number of molecules ([tex]3.131 * 10^{24}[/tex]) by the number of oxygen atoms per molecule (12):

([tex]3.131 * 10^{24}[/tex] molecules) * (12 oxygen atoms/molecule) = [tex]3.757 * 10^{25}[/tex] oxygen atoms.

To learn more about atoms click here https://brainly.com/question/30898688

#SPJ11

Answer:

10 Watts

Explanation:

These equations are needed to work out the answer:

power= work done/ time taken

work done= force* distance

force= mass* acceleration

force: 10 kg* 1m/s= 10

work done: 10 * 2m= 20m

power: 20/2= 10

Hope this helps :)

Pls brainliest...

* Sorry if my answer is bad, I'm learning this kind of things in Physics*

The main difference between a continuous and linear spectrum is the presence or absence of gaps or missing colors in the emitted light.

A continuous spectrum, such as that emitted by a blackbody radiator, shows a wide range of frequencies or wavelengths of light with no gaps. The intensity of the emitted light varies continuously throughout the spectrum. Blackbody radiators, like the Sun, produce light by thermal radiation and exhibit a continuous spectrum.

A line spectrum, on the other hand, consists of distinct and separate lines or "spectra" at specific frequencies or wavelengths. This type of spectrum is produced when atoms or molecules in a gas phase emit or absorb light at particular wavelengths, which are unique to the element or compound involved. Line spectra are characteristic of elements and can be used for identification purposes.

Learn more about the electromagnetic spectrum at https://brainly.com/question/25131143

#SPJ11

The volume of the Freon-12 sample at STP is approximately 14.87 L.

To find the volume of a sample of Freon-12 (CF2Cl2) at STP, given that it occupies 10.0 L at 374 K and 191.50 kPa, we can use the combined gas law formula.

1. Write down the given information:
  Initial volume (V1) = 10.0 L
  Initial temperature (T1) = 374 K
  Initial pressure (P1) = 191.50 kPa
  Standard temperature (T2) = 273 K
  Standard pressure (P2) = 101.3 kPa

2. Apply the combined gas law formula:
  (P1 * V1) / T1 = (P2 * V2) / T2

3. Plug in the given values and solve for the final volume (V2):
  (191.50 kPa * 10.0 L) / 374 K = (101.3 kPa * V2) / 273 K

4. Solve for V2:
  V2 = (191.50 kPa * 10.0 L * 273 K) / (374 K * 101.3 kPa) ≈ 14.87 L

To know more about Combined Gas Law:

https://brainly.com/question/15131030

#SPJ11