A(n)_________contains only one type of atom, whereas a(n)_________ is composed of two or more different elements bonded together. A(n)___________ also contains more than one substance, but these can be separated by physical means, whereas the components of a compound cannot.

Answer:

CH2

Explanation:

there is a common factor for 9;18 which is 9 so u divide both numbers by it 9/9 and 18/9 giving 1:2 so 1 C to every 2 H so CH2

The empirical formula of C9H18 will be CH2.

The empirical formula of a compound shows the ratio of atoms present in a compound. The molecular formula of the compound shows the total number of atoms present in a compound.

Here, C9H18 if we divide the number of total atoms by 9, C9/ 9, and H18/ 9. the ratio will be in the form of 1: 2. therefore, the empirical formula will be CH2.

C9H18 is the molecular formula of the compound, while CH2 is the empirical formula of the compound. The molecular formula of butane is C4H16, then its empirical formula is CH4.  The molecular formula of compound is P4H10 then its empirical formula is P2H5.

Therefore, The empirical formula of C9H18 will be CH2.

To learn more about empirical formulas refer to the link:

https://brainly.com/question/14044066

#SPJ2

Answer:

C₃H₆ is an alkene

C₆H₁₂ is an alkene

C₈H₁₈ is an alkane

C₇H₁₂ is an alkyne

Explanation:

To determine which of the compound is alkane, alkene, or alkyne,we shall use the general formula of alkane, alkene, and alkyne. This is illustrated below:

General formula for alkane => CₙH₂ₙ₊₂

General formula for alkene => CₙH₂ₙ

General formula for alkyne => CₙH₂ₙ₋₂

For C₃H₆:

n = 3

Alkane => CₙH₂ₙ₊₂ => C₃H₂₍₃₎₊₂ => C₃H₈

Alkene => CₙH₂ₙ => C₃H₂₍₃₎ => C₃H₆

Alkyne => CₙH₂ₙ₋₂ => C₃H₂₍₃₎₋₂ => C₃H₄

Thus, C₃H₆ is an alkene

For C₆H₁₂:

n = 6

Alkane => CₙH₂ₙ₊₂ => C₆H₂₍₆₎₊₂ =>C₆H₁₄

Alkene => CₙH₂ₙ => C₆H₂₍₆₎ => C₆H₁₂

Alkyne => CₙH₂ₙ₋₂ => C₆H₂₍₆₎₋₂ => C₆H₁₀

Thus, C₆H₁₂ is an alkene

For C₈H₁₈:

n = 8

Alkane => CₙH₂ₙ₊₂ => C₈H₂₍₈₎₊₂ => C₈H₁₈

Alkene => CₙH₂ₙ => C₈H₂₍₈₎ => C₈H₁₆

Alkyne => CₙH₂ₙ₋₂ => C₈H₂₍₈₎₋₂ => C₈H₁₄

Thus, C₈H₁₈ is an alkane.

For C₇H₁₂:

n = 7

Alkane => CₙH₂ₙ₊₂ => C₇H₂₍₇₎₊₂ => C₇H₁₆

Alkene => CₙH₂ₙ => C₇H₂₍₇₎ => C₇H₁₄

Alkyne => CₙH₂ₙ₋₂ => C₇H₂₍₇₎₋₂ => C₇H₁₂

Thus, C₇H₁₂ is an alkyne.

SUMMARY:

C₃H₆ is an alkene

C₆H₁₂ is an alkene

C₈H₁₈ is an alkane

C₇H₁₂ is an alkyne

Answer:

I would say, what helps me is really paying attention in class and asking questions, also making sure you study for upcoming test's and quizzes and completely assingments on time

Explanation:

Answer:

19.47%

Explanation:

[tex]\frac{1.29}{1.29+5.35}[/tex]

Please recheck, for this answer may not be correct

Answer:

[tex]\Delta T=-146.5K[/tex]

Explanation:

Hello!

In this case, given the Charles' law which allows us to understand the volume-temperature behavior as shown below:

[tex]\frac{T_1}{V_1}=\frac{T_2}{V_2}[/tex]

Thus, given that we need to calculate the final temperature after the compression, we obtain:

[tex]T_2=\frac{V_2T_1}{V_1}=\frac{1.00L*293K}{2.00L}\\\\T_2=146.5K[/tex]

Thus, the temperature change would be:

[tex]\Delta T=T_2-T_1=146.5K-293K\\\\\Delta T=-146.5K[/tex]

Best regards!

Pounds of force pressing on a rectangle : F = 173.86 lbs

Given

P at sea level = 14.7 lbs/in²

Area of rectangle : A = 76.3 cm²

Required

Pounds of force

Solution

P = F/A

F= P.A

Conversion :

1 cm² = 0.155 in²

76.3 cm² = 11.827 in²

Input the value :

F = 14.7 lbs/in² x 11.827 in²

F = 173.86 lbs

Answer:

Because of reaction between solid and liquid

Answer:

shouldn't take that long i would say from 30 to 40 minutes bc its melting in warm water its turning from a solid to a liquid.

Explanation:

Answer:

3

Explanation:

Answer:

A or C

Explanation:

Answer: It is D.

Explanation: Edge 2021

Answer:

US₂

Explanation:

Uranium sulfide (US₂)

Uranium atomic symbol = U

Sulfur atomic symbol = S

Uranium valency = +4

Sulfur valency = -2

So;

Uranium sulfide (US₂)

Answer:

Cu    +    2AgNO₃  →   2Ag    +    Cu(NO₃)₂

Explanation:

The reactants are:

         Copper metal  = Cu

         Silver nitrate  = AgNO₃

The products are:

          Silver metal  = Ag

           Copper (II) nitrate  = Cu(NO₃)₂

So, the reaction equation is given as;

      Cu    +    2AgNO₃  →   2Ag    +    Cu(NO₃)₂

This is a single displacement reaction

Answer:

8fw+26gw

i think this is it

Answer:

the moral amount of the gas.

Answer:

migratory distribution

Explanation: The pattern of migratory distribution of species may require collaboration between different countries for effective preservation. This is because species migration can make them enter different territories, which will need to provide an effective level of preservation for species survival

Answer:

d. Urea nitrate

Explanation:

Urea nitrate is a fertilizer-based explosive that is produced in one step by reaction of urea with nitric acid. The is an exothermic reaction, therefore, necessary steps and precautions must be taken to ensure safety during the process. The equation of the reaction is given below:

(NH₂)₂CO (aq) + HNO₃ (aq) → (NH₂)₂COHNO₃ (s)

It is as easily-made explosive and can also be used as a catalyst in Diels-Alder reactions of aromatic amines.

In the presence of water, urea nitrate readily decomposes to its original components, urea and nitric acid.

On its own, urea  is commonly used as a deicer for sidewalks as it is a noncorrosive de-icing material. However, it is a more costly method of deicing,  compared to other methods and it is best used where water runs off into vegetation than into a water-body or a storm drain because of its high-oxygen demand which could result in its reducing the oxygen level of the water body. It It is readily found in nature (in our urine) and is also  synthesized artificially.  It has a very high nitrogen content, and is most often used as a nitrogen‐based fertilizer.

Answer:

true mark me brainlist

Explanation:

Answer:

C. 3

Explanation:

I hope my answer will be useful

Answer:

A. 1.02 moles .

Explanation:

Hello!

In this case, given the ideal gas equation, as we need to solve for moles, we divide both sides by RT to get:

[tex]n=\frac{PV}{RT}[/tex]

Thus, by plugging in the pressure and temperature at STP (1.00 atm and 273.15 K respectively) we obtain:

[tex]n=\frac{1.00atm*22.9L}{0.08206\frac{atm*L}{mol*K}*273.15K}\\\\n=1.02mol[/tex]

Therefore, the correct answer is A. 1.02 moles

Best regards!

Answer:

Double replacement:

Explanation:

Chemical equation:

2AsCl  +  3H₂S     →       As₂S₃ + 6HCl

The given reaction is double displacement reaction. In this reaction arsenic trichloride and hydrogen sulfide react and produced arsenic sulfide and hydrogen chloride. In double displacement reaction both anion an cation of reactants are exchanged with each other.

Double replacement:

It is the reaction in which two compound exchange their ions and form new compounds.

General equation:

AB + CD → AD +CB

The solution of manganese ion, Mn2+ is colorless. This way, the reaction involves a colour change from pink to transparent.

There is no option with this information.

So, the best answer is (A)

Answer:

C)pink colour of the Mn+2.

Explanation:

First of all, a titration involving the change from MnO4- to Mn2+ is a redox reaction.

This redox reaction does not need an indicator because the MnO4- has a deep violet colour while Mn2+ has a light pink colour.

Hence, the change from MnO4- to Mn2+ is signaled by the appearance of the light pink colour of Mn2+ at end point.

Answer:

oKaY?!

Explanation:

Answer:

I think the answer is Himalayan Mountain

Explanation:

I'm not sure but I think so

Answer:

Today, the term is most often used to refer to the valley of the East African Rift, the divergent plate boundary which extends from the Afar Triple Junction southward across eastern Africa, and is in the process of splitting the African Plate into two new separate plates.

Explanation:

So it is D

Answer:

Part 1-B

Part 2-D

Part 3-A

Answer:

1.B

2.D

3.A

Explanation:

.......................

Mass (in g) of the excess reactant (P₄) left = 7.626 g

Given

Reaction

P4(s)+6Cl2(g)→4PCl3(l)

45.57 g P4 and 130.2 g Cl2

Required

mass (in g) of the excess reactant left

Solution

mol P₄ (MW=124 g/mol) :

45.57 : 124 = 0.3675

mol Cl₂(MW=71 g/mol) :

130.2 : 71 = 1.834

mol : coefficient of reactant : P₄ : Cl₂ :

= 0.3675/1 : 1.834/6

= 0.3675 : 0.306

Cl₂ as limiting reactant(smaller ratio)

Reacted mol of P₄ (as an excess reactant):

=1/6 x 1.834

= 0.306

Unreacted mol of P₄ :

= 0.3675 - 0.306

= 0.0615

Mass of P₄(left) :

= 0.0615 x 124

= 7.626 g

A solid substance formed from a solution is a(n).

D. Precipitate

A solid substance formed from a solution is a(n)

a. reactant

b. equation

C. compound

d. precipitate

D. Precipitate

Answer:

Its positive charge is attracted to the negative charge of Cl–.

Explanation:

The best description of why NH₄⁺ forms an ionic bond with Cl⁻ is that its positive charge is attracted to the negative charge of Cl⁻.

An ionic bond forms as a result of transfer of electrons. As a result the seemingly metal ion is attracted to the negative non-metal ion.

The electrostatic force of attraction between these ions is the ionic or electrovalent bond.

So, the attraction between these opposite charges will form the ionic bond.

Answer:

B: Its positive charge is attracted to the negative charge of Cl–

Explanation:

right on edge2021

B) loses electrons and is oxidised

Its oxidation number is 0 in Co(s) and +2 in Co(C2H302)2(aq), hence it gets oxidised

In the reaction as mentioned below:-

[tex]Co(s) + Ni(C2H302)2aq -- > Co(C2H3O2)2aq + Ni(s)[/tex]

As shown in reaction cobalt losses elections so the reaction is oxidised.  Thus, option b is correct.

Oxidation is a type of reaction in which loss of electrons and gain of protons is takes place during a reaction by molecules, atom or ion. Oxidation takes place when the oxidation state of a molecule, atoms or ion is increased.

The opposite reaction is called as reduction in which gains of electron and loss of protons is takes place . In reduction reaction the oxidation state of molecules, atoms or ion is decreased.

Oxygen has been added to a compound as an older method of oxidation.  Although oxygen is typically added to a compound in compliance with the loss of electrons requirements and the oxidation state increase.

Therefore, we can say that in the reaction

[tex]Co(s) + Ni(C2H302)2aq -- > Co(C2H3O2)2aq + Ni(s)[/tex]

As shown in reaction cobalt losses elections so the reaction is oxidised.  Thus, option b is correct.

Learn more about oxidation here:

https://brainly.com/question/19761029

#SPJ2