It is proved from the below that the temperature of the egg varies from the shell to the center of the egg.
Using the 2-dimensional finite element method, we will need to find the Biot number of the system by using the formula:
[tex]\mathbf{Bi = \dfrac{h_c r_o}{k} }[/tex]
According to the Heisler chart, the curves in the graph represent a range of values for the inverse of the Biot number,
where;
[tex]\mathbf{Bi = \dfrac{h_c r_o}{k} }[/tex]
here;
k = the material's thermal conductivity h = the heat transfer coefficient.By developing nodes based on assumptions;
[tex]\mathbf{Bi = \dfrac{1700 \times 0.025}{0.682} }[/tex]
Bi = 62.32
The inverse of Biot number is:
[tex]\mathbf{=\dfrac{1}{Bi}}[/tex]
[tex]\mathbf{=\dfrac{1}{62.32}}[/tex]
= 0.016
Similarly, the Fourier number [tex]\mathbf{F_o}}[/tex] is calculated by using the expression;
[tex]\mathbf{F_o = \dfrac{\alpha t }{r_o^2} }[/tex]
[tex]\mathbf{F_o = \dfrac{k t }{\rho c_pr_o^2} }[/tex]
where;
time (t) = 15 mins = (15 × 60) sec[tex]\mathbf{F_o = \dfrac{0.682 \times 15 \times 60 }{958.4 \times 4211 \times 0.025^2} }[/tex]
[tex]\mathbf{F_o = 0.243}[/tex]
Using the 2-dimensional finite element method, the temperature ratio is:
[tex]\mathbf{\dfrac{T(0,t) -T_{\infty}}{T_o -T_{\infty}} = 0.1 }[/tex]
T(0,t) = 100 + 0.1(4-100)
T(0,t) = 100 + 0.1(-96)
T(0,t) = 100 - 9.6
T(0, t) = 90.4° C
Therefore, we can conclude that it is proved that the temperature of the egg varies from the shell to the center of the egg.
Learn more about the Heisler chart here:
https://brainly.com/question/14839677?referrer=searchResults
What's the purpose of a curtain drain?
Answer:
A French drain, or curtain drain, removes excess surface water so you won't need hip boots to cut the grass. A French drain, sometimes called a curtain drain, is a simple system with no moving parts -- gravity removes excess water from problem areas in your yard.
what is Agriculture and Environmental Engineering
Answer:
Agricultural engineers attempt to solve agricultural problems concerning power supplies, the efficiency of machinery, the use of structures and facilities, pollution and environmental issues, and the storage and processing of agricultural products.
pretty ako hjshjs ok.
Answer:
wala naman pong pic po wala kahit walang pic magan da parin
The following problem refers to triangle ABC, find all missing parts. Round degrees to 1 decimal places and
sides to the nearest whole number.
A = 36.5°C = 67.5°, c = 224 inches
A=
В.
C
O
O
490 do
a =
inches
inches
inches
C-
Answer:
A =41 .....
......
......
....C=21
Anything that is made to meet a need or desire is?
a) Design
b) Technology
c) Process
d) Tool
Answer:
Technology
Explanation:
It’s made to meet desire
It should be noted that Anything that is made to meet a need or desire is Technology.
What is Technology?Technology can be regarded as the practical application of science.
Technology can be seen in areas such as
CommunicationTransportationAgricultureHowever, Technology came up because of the necessity for it, people desire it.
Learn more Technology at;
https://brainly.com/question/25110079
A cylindrical work part has a diameter and a height of both as 6cm. The coefficient of friction at the die work interface is 0.10. The work metal has a strength coefficient of 270MPa, yield strength of 110MPa, and a strain hardening exponent of 0.15. Determine the instantaneous force in N at a height of 4cm
What is the purpose of the red-core yarns in the synthetic sling?
An immediate strength loss. This is why Sling Webbing has red core yarns to visually reveal damage and act as a basis for sling rejection.
▞▞<☵>▆▇█▓▒░─╤╦╱彡( ⱫɆ₳Ⱡ )彡╲╦╤─░▒▓▇▆▅<☵>▞▞
The purpose of the red-core yarns in the synthetic sling is to detect the strength loss and also to reveal the damage in the red corn yarns.
What is synthetic sling?Lifting slings constructed of synthetic materials like nylon or polyester are known as synthetic slings. These kinds of slings, which can also be called synthetic lifting straps or synthetic rigging slings, are thin, flexible, and protected by a jacket.
Sling Webbing features red core yarns to visibly indicate damage and serve as a reason for sling rejection because of this. Synthetic sling are flexible.
Therefore, it can be concluded that The red-core yarns in the synthetic sling are used to both reveal and detect strength loss in the red maize yarns. It also acts as the basis for sling rejection.
Learn more about Synthetic sling here:
https://brainly.com/question/27088476
#SPJ2
Which of the following is a Dashboard Scoreboard for alignment of the business where information is constantly flowing through the Tiers so immediate actions can be taken?
Answer:
What is a dashboard?
A dashboard is an information management tool used to track KPIs, metrics, and key data points that are relevant to your business, department, or a specific process. Dashboards aggregate and visualize data from multiple sources, such as databases, locally hosted files, and web services. Dashboards allow you to monitor your business performance by displaying historical trends, actionable data, and real-time information.
Dashboards actually take their name from automobile dashboards and they are used in much the same way. For the sake of an analogy, let’s look at a car. There may be hundreds of processes that impact the performance of your vehicle if you look under the hood. Your car’s dashboard summarizes this using visualizations so you can focus on what matters most: safely driving your vehicle.
For businesses, there are hundreds of processes that impact your performance if you look ‘under the hood’, so to speak. And with a wealth of data made available these days, managing and extracting value from it can be difficult. Simplifying data analysis and distribution through tools like dashboards is a way to help businesses rev their engines and make smarter, better, faster data-driven decisions.
And a well designed dashboard levels up your approach to information management. Everyone in the business, regardless of role, has questions about your company performance, whether it be campaign performance, new wins, or churn rate. Dashboards bring everyone (and your metrics) together in one place to answer these questions.
Explanation:
Engineer It A water heater is a tank in which cold water is heated. Cold water flows into the tank to keep it full. A heating element warms the water inside the tank. The heated water can then be sent to hot water faucets in a building. Assume that a water heater design requires the hottest water possible to be sent to hot water faucets in a building. Where would be the best place for the hot water outlet pipe to be attached to the tank: the top, the middle, or the bottom of the tank? Explain your answer.
Answer:
i think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top
Explanation:
I think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top.
What is Heater?The process of transforming electrical current into heat energy is known as electric heating. An electrical resistor serves as the heating element in an electric heater, and heat is generated there when an electric current flows through it.
This procedure is frequently utilized in a wide range of domestic applications. from using an electric burner to prepare food, a kettle to boil water, and of course, house heating.
With one significant exception—they don't rely on a boiler and a system of pipes to produce the heat—electric heaters and radiators function exactly like your central heating radiators that are plumbed in.
Therefore, I think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top.
To learn more about Heating, refer to the link:
https://brainly.com/question/1429452
#SPJ2
Which of the following classes of biomaterials would be most appropriate for fabricating an artificial tendon, a tissue that must sustain substantial deformation at low forces and quickly regain its original dimensions after stress release? Why ?
(a) Metals
(b) Ceramics
(c) Polymers
For the three-point bending test set up in this lab, what would be the shear force and moment distributions along the beam axis
Answer: So to calculate the flexural strength (σ), multiply the force by the length of the sample, and then multiply this by three. Then multiply the depth of the sample by itself (i.e., square it), multiply the result by the width of the sample and then multiply this by two
Explanation:
As an engineer you are responsible for selecting and procuring pump for your water distribution system. After some background study you selected and purchased an 1160 rpm Taco 4013 FI and CI series pumps with a 12.75 impeller diameter (for details see the ppt slides for the pump chapter). After procuring the pump you realize that you should have purchased a similar pump but with a 2000 rpm.
Required:
a. What will be your approach to handle this situation?
b. How would you prepare a performance curve at 2000 rpm?
binary classification algorithm
Answer:
What is this exactly?
Explanation:
If your asking for the definition, binary classification is the task of classifying the elements of a set into two groups on the basis of a classification rule.
Twisting force is known as: A. thrust.
B. horsepower.
C. torque.
D. energy
1. A company has an annual demand for a product of 2000 units, a carrying cost of $20per unit per year, and a setup cost of $100. Through a program of setup reduction, thesetup cost is reduced to $20. Run costs are $2 per unit. Calculate:
A. The EOQ before setup reduction.
B. The EOQ after setup reduction.
C. The total and unit cost before and after setup reduction.
Answer:
B the EOQ after setup reduction.
Through a program of setup reduction, thesetup cost is reduced to $20. Run costs are $2 per unit. CalculateThe EOQ after setup reduction. Hence, option B is correct.
What is meant by EOQ?The amount of an order known as a "economic order quantity" (EOQ) is one that lowers the overall cost of acquiring and maintaining inventories of goods or raw materials.
The supplier should be contacted to ascertain the optimal inventory size in order to lower the company's overall annual inventory cost. Economic order quantity, or EOQ, is the phrase. Supply, logistics, and operations management all use this measurement.
In its most basic form, EOQ is a technique for determining the quantity and frequency of orders required to satisfy a particular level of demand while reducing the cost per order.
Thus, option B is correct.
For more information about EOQ, click here:
https://brainly.com/question/13049890
#SPJ2
List the crops that can be used dibbler .
Answer:
A dibber or dibble or dibbler
Explanation:
A dibber or dibble or dibbler is a pointed wooden stick for making holes in the ground so that seeds, seedlings or small bulbs can be planted. Dibbers come in a variety of designs including the straight dibber, T-handled dibber, trowel dibber, and L-shaped dibber
As
is the rate (in time and distance) at which that force
is a twisting or turning force,
is produced
(
Select one:
O A. Torque; horsepower; torque
OB. Torque; horsepower; horsepower
O C. Horsepower; torque; horsepower
O D. Horsepower; torque; torque
Clear my choice
Answer:
C
Explanation:
As horsepower is the rate at which that force torque is a twisting or turning force, horsepower is produced. Hence option C is correct.
What is horsepower?Horsepower is defined as a unit used to describe the pace at which labor is done or to quantify power, frequently in relation to the output of engines or motors. Standardization and types of horsepower vary widely. A car's engine power is measured in horsepower (hp); the greater the number, the more power is transferred to the wheels and, in theory, the faster it will travel.
To put it simply, horsepower is your overall speed and power, whereas torque allows you to feel the sensation of acceleration when you put your foot down. When you realize that horsepower is derived from torque, this makes sense. Torque is a unit of rotational or twisting force. The power an engine produces is referred to as horsepower.
Thus, as horsepower is the rate at which that force torque is a twisting or turning force, horsepower is produced. Hence option C is correct.
To learn more about horsepower, refer to the link below:
https://brainly.com/question/12260337
#SPJ2
Differentiate between strain hardening exponent and strain rate sensitivity
Twisting force is known as:
Select one:
A. thrust.
B. horsepower.
C. torque.
D. energy.
The process of refining specification involves
O defining the initial design.
O presenting the finished product to a client.
deciding whether or not to continue with a project.
O adjusting outcomes and making pragmatic changes.
Answer:
I'm not sure but I'm pretty sure it the second one (btw I'm sorry if this didn't help) :/
Determine the location of the maximum bending moment. In the formula, w is the rate of load increase in lb ft and l is the length (in ft) of the beam. calculus
https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/ https://vm.tiktok.com/ZSeMW4ttQ/
Warning danger ahead sign
Answer: okiiiii
Explanation:
Reaction of steam and propane produce hydrogen gas.
C3H8(g) + 3 H2O(v) -> 3 CO(g) + 7 H2(g)
Draw a block diagram and process flow diagram including flow table of this process.
Answer:i think it is a problem only Joe biden can solve i like your cut g
Explanation:
what is the marking menu fusion360
The 'marking menu' opened up ways for me to access the most commonly used commands and tools with a flick of the wrist. What's more impressive is that its dependent on workspace, so you can use it in all parts of the design!
HOPE IT HELPS:)
PLS FOLLOW:)
#BRAINLIEST:)
A positively charged electric has a charge of 2 Coulombs. If 12.5x10^18 free electrons are added to it, what will be the net charge on the said dielectric?
The net charge on the said dielectric is 0
1C = 6.25 * 10¹⁸ electrons; hence:
-12.5x10¹⁸ free electrons = (-12.5x10¹⁸ free electrons * (1C/ 6.25 * 10¹⁸ electrons))
-12.5x10¹⁸ free electrons = -2 C
A positively charged electric has a charge of 2 Coulombs, hence:
Q₁ = 2C
12.5x10¹⁸ free electrons are added to it, hence:
Q₂ = -2C
[tex]Net\ charge(Q_{net})=Q_1+Q_2=2C+(-2C)=0[/tex]
Hence the net charge on the said dielectric is 0
Find out more at: https://brainly.com/question/10464929
Categorize the processes below as redox or acid/base.
a. Cell respiration/Krebs cycle
b. Butter becoming rancid
c. Carbonation of water
d. Whitening of teeth with fluoride ions
Concrete is forced into all parts of its form through a process called?
Concrete is forced into all parts of its form through a process called hydration.
What is hydration of concrete?The concrete is known to be one that solidifies and also hardens via a chemical method known to be hydration.
This is when water reacts with the cement, and it is one that bonds the other components together and so Concrete is forced into all parts of its form through a process called hydration.
Learn more about hydration from
https://brainly.com/question/5060579
#SPJ1
variable head permeability ?
Answer:
The variable head permeability test is one of various methods for determining soil permeability. It is used to determine the permeability of relatively new soil. Permeability refers to a soil's ability to enable water to pass through its pores or spaces.
Explanation:
Identify and explain the importance of Security Information and Event
Management (SIEM) .You are hire as a Information Security officer in Evincible
Securities .And you are going to move organization towards (SIEM) .
Security Information and events management describes an integration of Information and event management in the aspect of organizational security.
With Security Information and Event Management, organizations can effectively manage security logs of events and information using collected and filtered data in other to identify potential risk to networks and systems in real time. Gathered information could be used to create threat alerts and assign different level of priority based on specified rules and conditions.Hence, SIEM could leverage the capability of machine learning models and generated data in other build a robust security system.
Learn more : https://brainly.com/question/25675806
State Conditions necessary for static equilibrium of a particle of a rigid body
Answer:
Conditions for equilibrium require that the sum of all external forces acting on the body is zero (first condition of equilibrium), and the sum of all external torques from external forces is zero (second condition of equilibrium). These two conditions must be simultaneously satisfied in equilibrium.
Hi there!
For a particle to be in static equilibrium:
[tex]\huge\boxed{\Sigma \tau = 0}}[/tex]
The sum of torques acting on the particle must equal 0 Nm.
[tex]\huge\boxed{\Sigma F = 0}}[/tex]
The sum of forces acting on the particle must equal 0 N.
Both of these conditions MUST be met in order for a particle to be in STATIC equilibrium.