An electron is present at an energy level with an energy of 5.44 x 10−19 J. After a second, the electron is present at an energy level with energy, 2.4 x 10−19 J. What most likely happened during the transition?
A photon of energy 7.84 x 10−19 J was released.
A photon of energy 3.04 x 10−19 J was released.
A photon of energy 7.84 x 10−19 J was absorbed.
A photon of energy 3.04 x 10−19 J was absorbed.

Answer:

Degradation of matter

Explanation:

Physical change is a temporary change.

Answer:

3. 0.819L (819 mL)

Explanation: Before we go about solving this, we need to do some conversions prior to using the gas law, the gas law is as follows...

P(atm)*V(L)=n(mol)*r(constant)*T(in kelvin)

So here are all the conversions you need.

620 mm Hg -> 0.816 atm

1140 mL -> 1.14 L

37 C -> 310.15 K

After plugging in our new converted values, we will proceed to solve the number of moles of the gas present, our n value, so our equation will look like this...(Note: Constant r in this case is 0.08206 L*atm/K*mol)

(0.816 atm)(1.14 L) = n(0.08206)(310.15)

Solving for n we get 0.03653 moles.

Now our second part is to figure out the volume AT STP (standard temperature/pressure). In the STP conditions, your temperature defaults to 0 C (273.15 K) and 1 atm. Now there is an easier way to do this, but I'll also show the more comprehensive way. Here is the easier method...

Since 1 mole of every gas occupies 22.4 L at STP, we can simply multiply this by our number of moles. So (22.4L)(0.3653 mol) to give us 0.818272.

However, a more accurate answer can be given like this...

Plugging n back into the same equation and this time resetting pressure to 1 atm and temperature to 273.15 K and conserving our number of moles we get...

(1 atm)(v) = (0.03653 mol)(0.08206)(273.15 K)

v = (0.03653)(0.08206)(273.15)

v = 0.8188 L = 0.819 L or 819 mL

Answer:

B

Explanation:

The answer is B. All hydrocarbons are nonpolar, they are insoluble in water and they are highly flammable. Now, not all hydrocarbons have high boiling and melting point. For example, methane (CH4) has a boiling point of something clode to -161°C, and that is low. The boiling point increases when the number of carbon atoms in a compound increases, and based on methane and this theory, not all hydrocarbond have a high boiling point. This makes option B be the correct answer.

Answer:

Refer to the attachments!!

Explanation:

this question is in reference to the formation and naming of ionic compounds. Specifically, they want you to give examples of three ionic compounds with a metal to nonmetal ratio of 2 to 1. That means we need to have two metal atoms to metal ions, which are typically cat ions for every one non metal atom or an ion. In order for this to occur, we need to have the metal with half the charge of the nonmetal or the non metal with double the charge of the metal. So an example might be something like sodium sulfide. Sodium has one valence electron. It can give up sulfur needs to valence electrons in order to achieve an octet. So we need to. Sodium seems to give up one electron each to total so that sulfide can achieve an octet. Another one might be potassium oxide. Similar scenario. We've got potassium giving up one valence electron oxygen requiring too. So we need to potassium to supply the to valence electrons that oxygen needs to achieve an octet and lithium. Also in Group one A and alkali metal wants to give up just one valence electron to achieve an octet well to achieve, I guess a duet to be more like helium, and so it gives up one. If we have two of them, then we can provide the to valence electrons that sulfur needs. So this is sodium sulfide, potassium oxide and lithium sulfide. Remember when we name Ionic compounds? We named the Cat Ion with the name of the element and the anti on with the name of the Element, but with the ending oven of ID, a suffix of ID because each one of the cat ions donated their valence electrons to the anti on so the an ion could achieve an octet. Then all of the's will have an octet of valence electrons. Sulfur had six sodium had one. There were two of them, so we have a total of eight.

The metals that can form only one type of ion are Li, Al, Ca, Ba, Rb, W,Na, Mg and  Sr. They are called alkali metals.

Cobalt, Co is stable in both +2 and +3 oxidation state. So it can variable.

Lithium, Li only have +1 charge. So it is invariable from one compound to other.

Lead, Pb is variable as it has +2, +4 charge in which it is stable.

Pd has +2, +4 charge in which it is stable. So, It is variable.

Copper, Cu has +1, +2 charge. It is also variable. Potassium, K has only +1 charge. It is invariable. Aluminum, Al has only +3 charge. It is invariable.

Cesium, Cs is only stable in +1 charge. It is invariable. Molybdenum, Mo is stable in +4 and +6. It is variable. Calcium, Ca and Barium Ba are stable in +2 charge. It is invariable.

Rubidium, Rb is stable in +1 charge. It is invariable. Tungsten, W is stable in +6 charge. It is invariable. Iron, Fe is stable in +2, +3 charge. It is variable. Sodium, Na is stable in +1 charge. It is invariable. Mg and Sr are stable in +2 charge. It is invariable. Vanadium, V has +2, +3, +4, +5 charges. So, It is variable.

To know more about alkali metals

https://brainly.com/question/18153051

#SPJ3

Answer:

one Sodium (Na) atom, two oxygen (O) atoms, two carbon (C) atoms, and three hydrogens (H) atoms

Explanation:

Answer:

C

Explanation:

According to the concept of thermal energy, transfer of heat energy can be depicted by investigation of conduction through collisions between particles in space.

Thermal energy is defined as a type of energy which is contained within a system which is responsible for temperature rise.Heat is a type of thermal energy.It is concerned with the first law of thermodynamics.

Thermal energy arises from friction and drag.It includes the internal energy or enthalpy of a body of matter and radiation.It is related to internal energy and heat .It arises when a substance whose molecules or atoms are vibrating faster.

These vibrating molecules and atoms collide and as a result of which heat is generated in a substance , more the collision of particles , higher is the thermal energy.

Learn more about thermal energy,here:

https://brainly.com/question/3022807

#SPJ5

Answer:

it should be the second one since London dispersion causes interaction between molecules.

hope I helped.

Generally non ionic species with no polarity forms the London -dispersion bonds. London dispersion is weaker than the dipole-dipole interaction and hence it have less boiling  point.

Boiling point of  a substance is the temperature at which the substance changes from liquid state to gaseous state or vapor where, the two states are in equilibrium.

Boiling of a substance depends on the molecular weight, bond type,temperature, pressure as well as purity of the substance.

London dispersion force is formed between two non-polar atoms. These atoms when come closer they attains a temporary polar nature and gets bonded.

Dipole-dipole bond is formed between two atoms of permanent dipole moment and they are polar compounds. Thus dipole-dipole interaction is stronger than London dispersion interaction. A strong bond needs more energy to boil.

Hence, molecules with  Dipole-Dipole bond is having higher boiling point.

To find more about boiling point, refer the link below:

https://brainly.com/question/2153588

#SPJ2

Answer:

D

Explanation:

Answer:

for plato users, the answer is: give the plant structure and support

Explanation:

A moon orbits in a roughly circular path around a planet with a mass of 8.6 x 1023 kg. The distance from the center of the moon to the center of the planet is 7.04 x 106 meters. Calculate the speed of the moon in m/s.

Answer:

When the base neutralizes the acid, the number of moles of H+ = the number of moles of OH-. Therefore, the number of moles of H+ = 0.0125 moles. Every mole of HCl will produce one mole of H+; therefore, the number of moles of HCl = number of moles of H+. The concentration of the HCl is 0.25 M

Answer:

Explanation:

1. Methanol:

CH3OH + O2 ---> CO2 + 2H2O

2. Ethanol:

C2H5OH + 3O2  ---->  2CO2 + 3H2O

3. Propanol:

2C3H7OH +  9O2 ------> 6CO2 + 8H2O

4. Butanol

C4H9OH  + 6O2 ------->  4CO2 + 5H2O

5. Paraffin Wax:

C25H52 +  38O2 ----> 25CO2 + 26H2O

Answer:

heat energy released by the substance

The energy change that takes place during deposition is that heat energy is released by the substance. This statement is true about deposition.

Deposition is a phase transition that occurs when a gas is converted directly to a solid without passing through the liquid state. During deposition, energy is released by the gas particles and absorbed by the surface, resulting in a decrease in the energy of the gas particles and an increase in the energy of the surface particles.As a result, the substance releases heat energy as it changes from a gas state to a solid state.

Therefore, the correct option is:Heat energy released by the substance.

Learn more about heat energy,here:

https://brainly.com/question/29210982

#SPJ5

Answer:

Explanation:

I know it's right, because this answer is from my self and I hope it's help to us. keep learning and God bless.

Answer:

A

Explanation:

will group 2 elements gain electrons to bond with non-metals in group 16 in a 2:1 ratio

Answer:

125°C/m

Explanation:

The difference in temperature will be:

35 - 10 = 25

The outer duct surface is heated 25°C by the air from 10°C to 35°C;

This heat gain is simply divided by 0.2m to get heat gain per unit length:

25/0.2 = 125

125°C/m

If you're American, this will be °F I believe, so the answer will be:

125°F/m

Answer:

CH4 + O2 = CO2 + 2H2O

Explanation:

carbon dioxide and water is given off

no I will not please put you because that's the god of the Bible

Metals are good conductors of heat and electricity, and are malleable (they can be hammered into sheets) and ductile (they can be drawn into wire).

Nonmetals are (usually) poor conductors of heat and electricity, and are not malleable or ductile; many of the elemental nonmetals are gases at room temperature, while others are liquids and others are solids. 

The metalloids are intermediate in their properties.  In their physical properties, they are more like the nonmetals, but under certain circumstances, several of them can be made to conduct electricity.

hope this answer helped u, if u can pls mark me as the brainliest. :)

The volume of 0.160 M sulfuric acid necessary to react completely with 75.0 g sodium hydroxide is 0.15L

The reaction of sulphuric acid and sodium hydroxide is expressed as:

[tex]2NaOH + H_2SO_4 ==> Na_2SO_4 + 2H_2O[/tex]

Determine the moles of NaOH present

Molar mass of NaOH = 23 + 16 + 1 = 40g/mole

Given that mass of NaOH is 75.0g

Mole of NaOH = 75/40  = 1.875moles

Determine the number of moles [tex]H_2SO_4[/tex] needed to react with 1.875 moles NaOH

Moles of [tex]H_2SO_4[/tex] = [tex]\frac{1.875}{2} = 0.9375moles of H_2SO_4[/tex]

Recall that volume = Molar mass * number of moles

Volume of [tex]H_2SO_4[/tex] =  0.160 * 0.9375

Volume of  [tex]H_2SO_4[/tex] = 0.15L

Hence the volume of 0.160 M sulfuric acid necessary to react completely with 75.0 g sodium hydroxide is 0.15L

Learn more here: https://brainly.com/question/837939

Answer:

-O CH30

Explanation:

My Head Is About To Explode

Answer:

should be a or d, though im leaning towards d more. sadly can't narrow it down 100%. b nor c are correct since they are made out of wood and plastic which cannot allow electricity to pass by. copper and metal are effective conductors of electricity, which a steel knife and a glass tube is made out of.

Answer:approximately 5.627 × 1019 milliliters

Explanation:

Answer: 5

Explanation:

please brainliest me

I believe it is 3

Answer:

Explanation:

Answer:

i think its D

Explanation:

In order to get maximum accuracy, student should take average of results from all four trials.

Accuracy  in terms of chemistry can be defined as to how close a measurement is to the true value.There are three types of accuracy:

1) Point accuracy-It means accuracy is present at that point of scale only.It does not give any information about the accuracy of the instrument.

2)Percentage of true value--It is the accuracy  which is determined by identifying accuracy of the instrument  and comparing it with the measured true value.

3)Percentage of scale range- It is the accuracy  which determines accuracy of the measurement.

Accuracy in case of instruments  is neglected up  to ±0.5 percent.Accuracy of measurements can be increased by taking multiple measurements and taking into account human errors.

Learn more about accuracy,here:

https://brainly.com/question/15276983

#SPJ2

Finding dead insects or mouse droppings in the kitchen is an indication of pest infestation.

Pests are living organisms that are capable of spreading diseases, causing economic damages, or generally constituting nuisance to the environment.

Pest infestation occurs when there is a high number of pests in the environment. When this occurs, their activities are felt in the environment in terms of causing a nuisance, and damaging properties or contaminating foods.

More on pest infestation can be found here: https://brainly.com/question/13483095

Answer:

1) 1, 1

3)1, 1

4) 1, 2

5) 2, 1

6) 1, 5

7) 2, 5

Answer:

extraction technology.....