Answer:
a
Explanation:
all the other ones take years and hard work but learning japanese is pretty easy and you dont need to work to hard
the resistance of a heater element is 1200 ohms and draws a circuit of 0.4 amperes calculate the voltage of the circuit
Answer:
0.00033333333
Explanation:
A diffraction pattern is created on a screen when blue light is passed through a single slit. Does the central bright maximum in this pattern become wider or narrower, when the blue light is replaced by red light?
Answer:
becomes wider
Explanation:
From; asin θ= m λ
It was said in the question that in this particular instance blue light is replaced by red light. The wavelength of blue light is less than that of red light, it then follows that the central bright maximum in this pattern widens when red light is used.
Therefore the diffraction pattern becomes wider.
You are standing on a circular track that is 332 m long. You begin jogging at the start line and keep jogging until you complete a full lap and stop at the same point you
started at.
ard
• What is your final displacement?
Answer:
Zero.
Explanation:
By definition, the displacement is the difference between the final position and the initial position, so independent from the distance traveled (in this case a full lap), since the initial and final position are the same, the net displacement is just Zero.1. A spring extends by 10 cm when a mass of 100 g is attached to it. What is the spring constant? (Calculate your answer in N/m)10N/m
2. What will be the extension of this spring if the load is a) 4N and b) 75 g?
Answer:
1) k = 10 [N/m]
2) a-) x = 0.4 [m]
b) x = 0.075 [m]
Explanation:
To be able to solve this type of problems that include springs we must use Hooke's law, which relates the force to the deformed length of the spring and in the same way to the spring coefficient.
F = k*x
where:
F = force [N] (units of Newtons]
k = spring constant [N/m]
x = distance = 10 [cm] = 0.1 [m]
Now, the weight is equal to the product of the mass by the gravity
W = m*g = F
where:
m = mass = 100 [g] = 0.1 [kg]
g = gravity acceleration = 10 [m/s²]
F = 0.1*10 = 1 [N]
Now clearing k
k = F/x
k = 1/0.1
k = 10 [N/m]
2)
a ) if the force is 4 [N]
clearing x
x = F/k
x = 4/10
x = 0.4 [m]
m = 75 [g] = 0.075 [kg]
W = m*g = F
F = 0.075*10 = 0.75 [N]
x = .75/10
x = 0.075 [m]
24- What happens to a given mass of water as it is cooled from 4°C to zero?
(a) expands
(b) contracts
(c) vaporizes
(d) Neither expands, contracts, nor vaporizes.
Explanation:
A-It starts to expand. Hence ice and water of same weight has different volumes
Expansion happens to a given mass of water as it is cooled from 4°C to zero. Option A is correct.
What is temperature?Temperature directs to the hotness or coldness of a body. In straightforward terms,
it is the method of finding the kinetic energy of particles within an entity. Faster the motion of particles more the temperature.
Water loses density when it is cooled from 4°C to 0°C. It turns out that the temperature at which liquid water has the most significant density is 4 degrees Celsius.
It will increase in size when heated or cooled. Since most liquids shrink when they are chilled, it is rare for water to expand when cooled to lower temperatures.
As a mass of water is cooled from 4°C to zero, expansion occurs.
Hence, option A is correct.
To learn more about the temperature refer to the link;
https://brainly.com/question/7510619
#SPJ2
In Figure 1 , an engine that delivers power P is attached to a pulley that lifts a box of mass m0 a vertical distance of y0 at a constant speed in time t0 . If, as shown in Figure 2 the engine again delivers power P , how long would it take the engine to raise a box of mass 3m0 the same vertical distance y0 at a constant speed?
Options:
1/3 t0
t0
root(3 t0
3t0
9t0
Answer:
t = 3 t₀
Explanation:
The formula for the power delivered by the engine can be given in terms of the change in the potential energy of the box as follows:
P = P.E/t = mgy/t
where,
P = Power delivered by the engine
m = mass of box lifted = m₀
g = acceleration due to gravity
y = vertical distance or height box covered = y₀
t = time taken = t₀
Therefore,
P = m₀gy₀/t₀
t₀ = m₀gy₀/P -------------- equation (1)
Now, if we change the mass of box as:
m = 3m₀
y = y₀ (constant)
P = Constant
Then,
P = 3m₀gy₀/t
t = 3m₀gy₀/P
using equation (1):
t = 3 t₀
Answer:
t=3to
Explanation:
I took the quiz it is right
Which city did King David make the royal capital of the Kingdom of Israel?
Canaan
Jerusalem
Philistine
Cairo
Answer:
Jerusalem
Explanation:
because now a days jerusalem is the royal capital of the kingdom of israel so i conclude that the answer is jerusalem
A rock is thrown straight upward with a speed 6.000 m/s. If this rock takes 1.540 s to fall to the ground, from what height h was it released?
Answer:
3.8961038961038
Explanation:
6000/1540=3.8961038961038
X= v/t
5.List the four goals of Psychology. Give your own example for each one using a behavior
Answer:
describe, explain, predict, and change/control behavior.
Explanation:
describe: What are they doing? -Pavlov noticed that dogs were salivating when they would see his lab assistant before food was presented to them. This observation acted as a description of what was happening to them.
explain: Why are they doing that?- Pavlov started to look into why they were doing it. There was a stimulus, the assistant giving them food in the past to where they started to salivate at the sight of the lab assistant
predict: What would happen if I responded in this way?- Pavlov predicted that he could get the same reaction if he used a bell as a stimulus. Using this he was able to condition dogs to salivate at the ring of the bell.
change/control: What can I do to get them to stop doing that? Because of this discovery we can use conditioning today. For example, in the classroom teachers can use conditioning with their students to make it easier, parents to teach their children right from wrong and to have good behavior. (you do this bad thing you get time out, do a good thing and I will praise you, etc) It can be used when training employees and many other places.
Need help ASAP..please help
Answer:
option 3
Explanation:
can i get brainliest
If the velocity of a car changes from 0 meters per second (m/s) to 100 m/s in 10 seconds, what is the acceleration over that 10 second period?
Answer:
10m/s²
Explanation:
Given parameters:
Initial velocity = 0m/s
Final velocity = 100m/s
Time taken = 10s
Unknown:
Acceleration = ?
Solution:
Acceleration is the rate of change of velocity with time.
A = [tex]\frac{v - u}{t}[/tex]
v = final velocity
u = initial velocity
t = time taken
So, insert the parameters and solve;
A = [tex]\frac{100 - 0}{10}[/tex] = 10m/s²
Is Geothermal Energy renewable? Why or why not? Use in your own words.
Answer:
Yes, geothermal energy is a renewable energy resource because the water can be heated by pumping it through the rocks.
Assuming the acceleration due to gravity on the moon is exactly one-sixth of the acceleration due to gravity on Earth, what is the weight of the object on the moon?
I have assumed a weight of 120 N on Earth.
Answer:
The object weighs 20 N on the moon
Explanation:
Weight
The weight of an object depends on the mass m of the object and the acceleration of gravity g of the place they are in.
The formula to calculate the weight is:
W = m.g
If g_e is the acceleration of gravity on Earth, and g_m is the acceleration of gravity on the moon, we know:
[tex]g_m=1/6 g_e[/tex]
Dividing by ge:
[tex]g_m/g_e = 1/6[/tex]
An object of weight We=120 N on planet Earth has a mass of:
[tex]m = 120 / g_e[/tex]
Multiplying by gm:
[tex]m.g_m=120 g_m/g_e[/tex]
Substituting the ratio of accelerations of gravity:
[tex]m.g_m=120 * 1/6[/tex]
Since m.gm is the weight on the Moon Wm:
[tex]W_m=20~N[/tex]
The object weighs 20 N on the moon
Assuming the acceleration due to gravity on the moon is exactly one-sixth of the acceleration due to gravity on Earth, the weight of the object on the moon would be one-sixth of its weight on Earth.
Knowing an object's weight on Earth and applying the ratio of the acceleration caused by gravity on the moon to that on Earth will allow us to determine an object's weight on the moon.
Assume that the object's weight on Earth is W (in newtons).
On Earth, the acceleration due to gravity = 9.8 [tex]m/s^2[/tex].
On the moon, = (1/6) * 9.8 [tex]m/s^2[/tex] = 1.6333 [tex]m/s^2[/tex]
Weight = Mass * Acceleration due to gravity
Weight on the moon = W * (1/6)
Thus, the weight of the object on the moon would be one-sixth of its weight on Earth.
For more details regarding gravity, visit:
https://brainly.com/question/31321801
#SPJ6
At high noon, the sun is almost directly above (about 2.0 degrees from the vertical) and a tall redwood tree casts a shadow that is 10m long. How tall is the redwood tree?
290m
The light always travels in a straight line.
At high noon, the ray from the sun is 2° from the vertical axis.
tan θ = (Opposite side)/(Adjacent side)
On applying above trigonometric formula, we get,
tan 2 = 10/h
0.035 = 10/h
∴ h = 10/0.035 = 290 m
A copper collar is to fit tightly about a steel shaft whose diameter is 6.0000 cm at 19°C. The inside diameter of the copper collar at that temperature is 5.9800 cm. To what temperature must the copper collar be raised so that it will just slip on the steel shaft, assuming the temperature of both the steel shaft and copper collar are raised simultaneously?
Answer:
T' = 865.15 °C
Explanation:
In order for the copper collar to just slip on the steel shaft the, assuming are heated simultaneously, we must find the final parameters of both and equate them. Because the final diameters of both must be same for the slipping to occur.
FOR COPPER COLLAR:
dc' = dc(1 + ∝c*ΔT)
where,
dc' = final diameter of copper ring
dc = initial diameter of copper ring = 5.98 cm
∝c = coefficient of linear expansion for copper = 16 x 10⁻⁶ °C⁻¹
ΔT = Change in Temperature
Therefore,
dc' = (5.98 cm)[1 + (16 x 10⁻⁶ °C⁻¹)ΔT] ------------- equation (1)
FOR STEEL SHAFT:
ds' = ds(1 + ∝s*ΔT)
where,
ds' = final diameter of steel shaft
ds = initial diameter of steel shaft = 6 cm
∝s = coefficient of linear expansion for steel = 12 x 10⁻⁶ °C⁻¹
ΔT = Change in Temperature
Therefore,
dc' = (6 cm)[1 + (12 x 10⁻⁶ °C⁻¹)ΔT] ------------- equation (2)
Comparing equation (1) and equation (2):
(5.98 cm)[1 + (16 x 10⁻⁶ °C⁻¹)ΔT] = (6 cm)[1 + (12 x 10⁻⁶ °C⁻¹)ΔT]
(5.98 cm/6 cm)[1 + (16 x 10⁻⁶ °C⁻¹)ΔT] = [1 + (12 x 10⁻⁶ °C⁻¹)ΔT]
0.9967 + (1.59 x 10⁻⁵ °C⁻¹)ΔT = 1 + (12 x 10⁻⁶ °C⁻¹)ΔT
1 - 0.9967 = [(15.9 -12) x 10⁻⁶ °C⁻¹]ΔT
0.0033/3.9 x 10⁻⁶ °C⁻¹ = ΔT
ΔT = 846.15 °C
but,
ΔT = T' - T = T' - 19°C = 846.15°C
T' = 846.15 °C + 19 °C
T' = 865.15 °C
A 3520 kg truck moving north makes an INELASTIC collision with an 1480 kg car moving 13.0 m/s east. After colliding, they have a velocity of 9.80 m/s at 66.9 degrees. What was the initial velocity of the truck? (m/s)
Answer:
v = 12.8 m/s
Explanation:
Assuming no external forces acting during the collision, total momentum must be conserved.Since momentum is a vector, their components must be conserved too.Choosing a pair of axes coincident with the N-S and W-E directions, naming x to the W-E axis and y to the N-S one, we can write the following algebraic equations:[tex]p_{ox} = p_{fx} (1)[/tex]
[tex]p_{oy} = p_{fy} (2)[/tex]
Since we know all the information needed to solve (1), assuming a completely inelastic collision, we can focus in (2), writing both sides of the equation as follows:[tex]p_{oy} = m_{t} * v_{ot} = 3520 kg* v_{ot} (3)[/tex]
[tex]p_{fy} = m_{f} * v_{fy} = 5000 kg* 9.8 m/s * sin 66.9 = 45080 kg*m/s (4)[/tex]
Since (4) and (3) are equal each other, we can solve for vot, as follows:[tex]v_{ot} =\frac{45080kg*m/s}{3520kg} = 12.8 m/s (5)[/tex]
A string is waved up and down to create a wave pattern with a wavelength of 0.5 m. If the waves are generated with a frequency of 2 Hz, what is the speed of the wave that travels through the string to the other end? The speed of the wave is __ m/s.
Answer:
1m/s
Explanation:
Speed of a wave is expressed as;
Speed = frequency × wavelength
Given
Frequency = 2Hz
Wavelength = 0.5m
Required
Speed of the wave
Substitute
Speed = 2×0.5m
Speed = 1.0m/s
Hence the speed is 1.0m/s
an object of mass 4kg moving with the initial velocity of 20m/s accelerates for 10s and attaind a final velocity of 60m/s calculate the initial momentum
Explanation:
m = 4kg
u = 20m/s
t = 10s
v = 60m/s
initial momentum = mass × initial velocity
= 4 × 20 = 80kgm/s
At which stage of the scientific process should a scientific look at experimental data from other scientists to set up a new experimental study
Answer:
Hypothesis
Explanation:
A scientist decides to replicate an experiment completed by another scientist. Which statement describes something that would not affect the results of the replicated experiment
Hi, you've asked an incomplete question. However, I provided some explanation about the replication process that scientists do.
Explanation:
Replication in research involves carefully repeating an original experiment to see whether the same result would be arrived at as in previous research experiments.
For most scientists today, in other to avoid anything that would erroneously affect the results of the replicated experiment they usually follow the same procedures as carried by the previous researchers.
Find the net work done by friction on the body of a snake slithering in a complete circle of 3.93 m radius. The coefficient of friction between the ground and the snake is 0.25, and the snake's weight is 54.0 N.
Answer:
The net work done by friction on the body of the snake is 333.35J
Explanation:
Work done is given by
W = F × s
Where W is the Work done
F is the force
and s is the distance covered
Since we are to determine the work done by friction, then we will determine the frictional force. The frictional force is given by
f = μN = μw
Where μ is the coefficient of friction
N is the normal reaction
and w is the weight
But, F = f
∴ W = μws
From the question
μ = 0.25
w = 54.0 N
Now, we will determine s
From the question,
We are to determine the work done by friction on the body of a snake slithering in a complete circle of 3.93 m radius.
The distance s here is given by the circumference of the circle. Circumference of a circle is given by 2πr
∴ s = 2πr
s = 2 × π × 3.93
s = 7.86π m
Hence,
W = 0.25 × 54.0 × 7.86π
W = 333.35 J
Hence, the net work done by friction on the body of the snake is 333.35J.
The net work done by friction on the body of the snake is :
-333.35J
FrictionFormulas:
Work done (W) = F × s
F = force
s = distance covered
f = μN = μw
μ = coefficient of friction
N = normal reaction
w = weight
Solution:
F = f
Weight is :
W = μws
μ = 0.25
w = 54.0 N
Distance covered:
s = 2πr
s = 2 × π × 3.93
s = 7.86π m
Therefore,
W = 0.25 × 54.0 × 7.86π
W = 333.35 J
The net work done by friction on the body of the snake is 333.35J.
Learn more about "Friction":
https://brainly.com/question/13357196?referrer=searchResults
A repeated back and forth or up and down motion is called a
Answer:
A vibration is a repeated back-and-forth or up-and-down motion.
Explanation:
Waves carry energy through empty space or through a medium without transporting matter.
A falling stone takes delta t = 0.32s to travel past a window 2.2m Tall. From what height above the top of the window did the stone fall?
Answer:
The height above the top of the window is 1.44 m
Explanation:
Given;
time of motion, t = 0.32 s
height traveled at the given time, h = 2.2m
determine the initial velocity of the stone;
h = ut + ¹/₂gt²
2.2 = u(0.32) + ¹/₂ x 9.8 x 0.32²
2.2 = 0.32u + 0.502
0.32u = 2.2 - 0.502
0.32u = 1.698
u = 1.698 / 0.32
u = 5.31 m/s
This initial velocity on top of the window becomes the final velocity from the height above the window.
v² = u² + 2gh
where;
u is the initial velocity of the stone from the height above the window;
5.31² = 0 + (2 x 9.8)h
19.6h = 28.196
h = 28.196/19.6
h = 1.44 m
Therefore, the height above the top of the window is 1.44 m
A typical sheet of printer paper is 8.5 inches wide and 11 inches long.
a.) Calculate the length of one sheet in cm
b.) Calculate the width of one sheet in cm?
Answer:
Explanation:
Given the length and width in inches
Length = 8.5in
Width = 11in
b) Convert to centimeters
1in = 2.54cm
8.5in = x
Cross multiply
x = 8.5 × 2.54
x = 21.59cm
Hence the width in cm is 21.59cm
a) 11in = y
1in = 2.54cm
Cross multiply
x = 11 × 2.54
x = 27.94cm
Hence the length in cm is 27.94cm
How do the magnetic fields of Uranus and Neptune suggest that the mantles inside those planets are fluid?
Answer:
The surface must be a good absorber of light. Spectra of the planets proved that methane in the atmospheres of these planets is what absorbs red light.
Explanation:
Astronauts on the first trip to Mars take along a pendulum that has a period on earth of 1.26 s. The period on the other planet turns out to be 3.82 s. What is the free-fall acceleration on that other planet?
Answer:
1.066 m/s^2
Explanation:
On the earth and on Mars respectively, the time periods of the pendulums are expressed as:
Tearth = 2pi * sqrt(L/gearth)
Tmars = 2pi * sqrt(L/gMars)
Divide the two equations above:
Tearth/Tmars = sqrt(gMars/gearth)
gMars = gearth(Tearth/Tmars)^2 = (9.80m/s^2)(1.26s/3.82s)^2 = 1.066 m/s^2
A lightweight vertical spring of force constant k has its lower end mounted on a table. You compress the spring by a distance d, place a block of mass m on top of the compressed spring, and then release the block. The spring launches the block upward, and the block rises to a maximum height some distance above the now-relaxed spring. Find the speed of the block just as it loses contact with the spring.
Answer:
[tex]v=d\sqrt{\frac{k}{m}} [/tex]
Explanation:
In order to solve this problem, we can do an analysis of the energies involved in the system. Basically the addition of the initial potential energy of the spring and the kinetic energy of the mass should be the same as the addition of the final potential energy of the spring and the kinetic energy of the block. So we get the following equation:
[tex]U_{0}+K_{0}=U_{f}+K_{f}[/tex]
In this case, since the block is moving from rest, the initial kinetic energy is zero. When the block loses contact with the spring, the final potential energy of the spring will be zero, so the equation simplifies to:
[tex]U_{0}=K_{f}[/tex]
The initial potential energy of the spring is given by the equation:
[tex]U_{0}=\frac{1}{2}kd^{2}[/tex]
the Kinetic energy of the block is then given by the equation:
[tex]K_{f}=\frac{1}{2}mv_{f}^{2} [/tex]
so we can now set them both equal to each other, so we get:
[tex]=\frac{1}{2}kd^{2}=\frac{1}{2}mv_{f}^{2}[/tex]
This new equation can be simplified if we multiplied both sides of the equation by a 2, so we get:
[tex]kd^{2}=mv_{f}^{2}[/tex]
so now we can solve this for the final velocity, so we get:
[tex]v=d\sqrt{\frac{k}{m}} [/tex]
A car is accelerated at a constant rate from 15 m/s to 25 m/s. It takes the car 6 s to reach its final speed. What is the car’s acceleration?
Answer:
1.67 m/s²Explanation:
The car’s acceleration can be found by using the formula
[tex]a = \frac{v - u}{t} \\ [/tex]
where
v is the final velocity
u is the initial velocity
t is the time taken
a is the acceleration
From the question we have
[tex]a = \frac{25 - 15}{6} = \frac{10}{6} = \frac{5}{3} \\ = 1.666666...[/tex]
We have the final answer as
1.67 m/s²Hope this helps you
Jared walks 120 m east, 150 m south, and then 40 m west. Find the total
distance traveled by Jared
Answer:
310 m
Explanation:
120+150+40=310
On a double-well roller coaster, the person starts from a height of 10.5 meters, the height of the middle bump of the well is 6.7 meters. How much kinetic energy does this person have at the middle of the middle bump from the bottom if the mass of the person is 79 kg? (g=9.8 m/s2) Round to two decimal places.
Answer:
"2941.96 J" is the appropriate answer.
Explanation:
The given values are:
Mass,
m = 79 kg
Height,
h = 10.5 m
Now,
The total energy at the given height will be,
⇒ Potential energy = mgh
On substituting the values, we get
= [tex]79\times 9.8\times 10.5[/tex]
[tex]=8129.1 \ J[/tex]
So,
⇒ At height 6.7 m, total energy = At height 10.5 m, total energy
On substituting the values, we get
⇒ [tex]Potential \ energy+Kinetic \ energy=8129.1[/tex]
⇒ [tex]79\times 9.8\times 6.7+Kinetic \ energy=8129.1[/tex]
⇒ [tex]5187.14+Kinetic \ energy=8129.1[/tex]
⇒ [tex]K.E=8129.1-5187.14[/tex]
⇒ [tex]K.E=2941.96 \ J[/tex]