An atom acquires one or more electrons, which results in the formation of an ion with a negative charge known as an anion. Anions of elements in the second row are frequently utilised in chemical processes involving proton transfer and substitution.
Tetrahedral structures are seen by the oxyanions of second-row elements in their group oxidation states. Olivine minerals, also known as (Mg,Fe)₂SiO₄, contain tetrahedral SiO₄ units; nevertheless, the anion does not have a separate existence inside the mineral since the oxygen atoms in the solid state are surrounded tetrahedrally by cations.
Ate anions are extremely resistant to the loss of CH 3 because they have ionic connections between the core atom and the ligands, which are generated by elements that belong to the first three primary groups. Hypervalent anions, which are obtained from the other second-row elements, have predominantly covalent X-C bonding, which gives them (sometimes marginal) resistance to the effects of ligand loss. Hypervalent anions are obtained from the other second-row elements.
To know more about anions
https://brainly.com/question/28971609
#SPJ4
find the energy in joules and ev of photons in radio waves from an fm station that has a 90.0-mhz broadcast frequency.
The energy of photons in radio waves from the FM station with a 90.0 MHz broadcast frequency is approximately 5.96 × 10⁻¹⁹ Joules (J) and 3.72 electron volts (eV).
To find the energy of photons in radio waves from an FM station with a broadcast frequency of 90.0 MHz, we can use the equation:
E = h * f
Where:
E is the energy of the photon
h is the Planck's constant (approximately 6.626 × 10⁻³⁴ J·s or 4.136 × 10⁻¹⁵ eV·s)
f is the frequency of the radio wave
In this case:
Frequency (f) = 90.0 MHz = 90.0 × 10⁶ Hz
Using the formula with the given values:
E = (6.626 × 10⁻³⁴ J·s) × (90.0 × 10⁶ Hz)
E ≈ 5.96 × 10⁻¹⁹ J
To convert this energy value to electron volts (eV), we can use the conversion factor:
1 eV = 1.602 × 10⁻¹⁹ J
Converting the energy to eV:
Eₑᵥ = (5.96 × 10⁻¹⁹ J) / (1.602 × 10⁻¹⁹ J/eV)
Eₑᵥ ≈ 3.72 eV
Learn more about photons here:
https://brainly.com/question/30820906
#SPJ11
A rocket is launched straight up from the earth's surface at a speed of 1.90x104 m/s. For help with math skills, you may want to review: Mathematical Expressions involving Squares What is its speed when it is very far away from the earth? Express your answer with the appropriate units.
When the rocket is very far away from the Earth, its speed will approach zero. As the rocket moves away from the Earth's surface, it will be subject to the gravitational pull of the Earth, which will gradually decrease as the distance between the rocket and the Earth increases.
The gravitational force is inversely proportional to the square of the distance between two objects. Therefore, as the rocket moves farther away, the gravitational force acting on it decreases, leading to a decrease in acceleration. Eventually, at a very large distance from the Earth, the gravitational force becomes negligible, and the rocket's acceleration approaches zero.
According to the law of conservation of energy, the total mechanical energy of the rocket is conserved throughout its motion. Initially, the rocket has kinetic energy due to its high speed. However, as it moves away from the Earth, its potential energy increases while its kinetic energy decreases. Eventually, when the rocket is very far away, its kinetic energy approaches zero, which corresponds to its speed approaching zero. Therefore, the speed of the rocket when it is very far away from the Earth is effectively zero.
To learn more about gravitational refer:
https://brainly.com/question/72250
#SPJ11
Which of the following best describes a chemical reaction in a state of equilibrium?
a) The value of the equilibrium constant, Kc is 1.
b) The concentrations of reactants are equal to the concentrations of products.
c) Reactant molecules are forming products as fast as product molecules are reacting to form reactants.
d) The limiting reagent has been consumed.
e) All chemical reactions have stopped
c) Reactant molecules are forming products as fast as product molecules are reacting to form reactants.
In a chemical reaction at equilibrium, the forward and reverse reactions occur at the same rate, meaning that reactant molecules are forming products at the same rate as product molecules are reacting to form reactants. This dynamic balance between the forward and reverse reactions leads to a state of equilibrium.
Option c) best describes a chemical reaction in a state of equilibrium because it highlights the balance between the formation of products and the reformation of reactants. At equilibrium, the concentrations of reactants and products can be unequal, and the equilibrium constant (Kc) can have a value other than 1. The concept of a limiting reagent is not specific to equilibrium and can apply to reactions that are not in equilibrium. Lastly, while the reaction is at equilibrium, it does not mean that all chemical reactions have stopped; it indicates that the forward and reverse reactions are occurring at the same rate, resulting in no net change in the concentrations of reactants and products over time.
To know more about Equilibrium visit:
https://brainly.com/question/517289
#SPJ11
Using two to three sentences, summarize what you investigated and observed in this lab.
You completed three terra forming trials. Describe the how the sun's mass affects planets in a solar system. Use data you recorded to support your conclusions.
In this simulation, the masses of the planets were all the same. Do you think if the masses of the planets were different, it would affect the results? Why or why not?
How does this simulation demonstrate the law of universal gravitation?
It is the year 2085, and the world population has grown at an alarming rate. As a space explorer, you have been sent on a terraforming mission into space. Your mission to search for a habitable planet for humans to colonize in addition to planet Earth. You found a planet you believe would be habitable, and now need to report back your findings. Describe the new planet, and why it would be perfect for maintaining human life.
In the lab, I investigated the effects of the sun's mass on planets in a solar system through three terraforming trials.
The data I recorded showed that an increase in the sun's mass resulted in a greater gravitational pull on the planets, leading to increased temperatures and atmospheric changes, making the planets less suitable for sustaining life.
If the masses of the planets were different in the simulation, it would likely affect the results because the gravitational forces between the planets would vary.
This would impact their orbits, temperatures, and overall conditions, potentially altering their habitability.
The simulation demonstrates the law of universal gravitation by showcasing how the gravitational force between two objects (the sun and the planets) is directly proportional to their masses and inversely proportional to the square of the distance between them.
The varying effects of the sun's mass on the planets provide evidence for this fundamental law.
For more such questions on planets,click on
https://brainly.com/question/28430876
#SPJ8
an electron is to be accelerated from a velocity of 5.00×106 m/s to a velocity of 7.50×106 m/s . through what potential difference must the electron pass to accomplish this?
Therefore, the electron must pass through a potential difference of 8.875 V to be accelerated from a velocity of 5.00×10^6 m/s to a velocity of 7.50×10^6 m/s.
Given, The initial velocity of the electron,
u = 5.00×10^6 m/s.
The final velocity of the electron,
v = 7.50×10^6 m/s,
Charge on an electron, q = 1.6×10^-19 C.
We know that the kinetic energy of an electron is given by:
K = (1/2) mv²
where, m = mass of the electron = 9.11×10^-31 kg.
So, the initial kinetic energy of the electron can be calculated as:
K1 = (1/2) m u²
On substituting the given values,
we get:
K1 = (1/2) × 9.11×10^-31 kg × (5.00×10^6 m/s)²
K1 = 1.14×10^-18 J.
Similarly, the final kinetic energy of the electron can be calculated as:
K2 = (1/2) m v².
On substituting the given values, we get:
K2 = (1/2) × 9.11×10^-31 kg × (7.50×10^6 m/s)²
K2 = 2.56×10^-18 J.
The increase in kinetic energy of the electron is given by:
ΔK = K2 - K1
ΔK = (2.56×10^-18 J) - (1.14×10^-18 J)
ΔK = 1.42×10^-18 J,
We know that the potential difference across which an electron accelerates can be given by:
ΔV = ΔK / q.
On substituting the values of ΔK and q, we get:
ΔV = (1.42×10^-18 J) / (1.6×10^-19 C)
ΔV = 8.875 V.
to know more about energy of an electron visit:
https://brainly.com/question/12314525
#SPJ11
Which of the following statements regarding Pascal's Triangle are correct?
A. The nth row gives the coefficients in the expansion of (x+y)^n-1
B. The method for generating Pascal's triangle consists of adding adjacent terms on the preceding row to determine the term below them.
C. Pascal's triangle can be used to expand binomials with positive terms only.
D. The nth row gives the coefficients in the expansion of (x+y)^n
Pascal's Triangle is a mathematical tool with various properties. One correct statement is that the nth row provides coefficients in the expansion of (x+y)^(n-1).
Pascal's Triangle is a triangular arrangement of numbers. This triangle has several interesting properties. One of the correct statements is that the nth row of Pascal's Triangle gives the coefficients in the expansion of (x+y)^(n-1). For example, the third row of Pascal's Triangle is 1 2 1, which corresponds to the coefficients in the expansion of (x+y)^2.
Another correct statement is that the method for generating Pascal's Triangle involves adding adjacent terms on the preceding row to determine the term below them. Starting with the first row, which consists of a single 1, subsequent rows are generated by adding adjacent terms. However, the statements regarding Pascal's Triangle being used solely for expanding binomials with positive terms or giving coefficients in the expansion of (x+y)^n are incorrect.
Pascal's Triangle has broader applications in combinatorics, probability theory, and number theory.
Learn more about Pascal's Triangle here:
https://brainly.com/question/29549939
#SPJ11
A uniform solid sphere has a moment of inertia I about an axis tangent to its surface. What is the moment of inertia of this sphere about an axis through its center? (the moment of inertia of a solid sphere of mass M and radius R with an axis of rotation through its center is 2/5mr^2.
The moment of inertia of a uniform solid sphere about an axis tangent to its surface is (2/5)MR². However, moment of inertia of same sphere about an axis through its center is different and equals (2/3)MR².
The M is is the mass and R is radius of the sphere. The moment of inertia of a solid object measures its resistance to rotational motion. For a uniform solid sphere, the moment of inertia about an axis tangent to its surface is given by (2/5)MR², as mentioned in the problem.
When considering the moment of inertia about an axis through its center, the sphere can be thought of as a collection of infinitesimally thin circular disks stacked on top of each other. Each disk has a different moment of inertia, depending on its distance from the axis of rotation.
Using the parallel axis theorem, which states that the moment of inertia about an axis parallel to and a distance "d" away from an axis through the center of mass is equal to the moment of inertia about the center of mass plus the mass times the square of the distance "d," we can calculate the moment of inertia of the sphere about an axis through its center.
Applying the parallel axis theorem to each infinitesimally thin disk and integrating over the entire volume of the sphere, we find that the moment of inertia about the axis through the center is (2/3)MR².
Learn more about moment of inertia here:
https://brainly.com/question/30051108
#SPJ11
4. what differences are there between a double slit pattern and triple slit pattern?
A double slit pattern consists of two parallel slits through which light or other waves pass whereas, a triple slit pattern consists of three parallel slits through which light or other waves pass.
In a double slit pattern, the interference of the waves from the two slits creates a pattern of alternating bright and dark fringes called an interference pattern. The bright fringes correspond to constructive interference, where the waves from the two slits reinforce each other, while the dark fringes correspond to destructive interference, where the waves from the two slits cancel each other out.
In a triple slit pattern, the interference of the waves from the three slits creates a more complex interference pattern compared to the double slit pattern. The pattern may consist of multiple bright and dark fringes, exhibiting more intricate interference effects.
In a double slit pattern, the intensity of the fringes decreases as we move away from the central maximum (bright fringe). The spacing between the fringes is determined by the wavelength of the waves and the distance between the slits.
In a triple slit pattern, the intensity and spacing of the fringes can vary depending on the relative positions and distances between the slits. The interference pattern can be more complex with additional bright and dark regions compared to the double slit pattern.
Therefore, the main differences between a double slit pattern and a triple slit pattern lie in the number of slits and the resulting interference pattern. The triple slit pattern can exhibit more complex interference effects compared to the simpler double slit pattern.
To know more about parallel slits here
https://brainly.com/question/30887977
#SPJ4
Using your knowledge of exponential and logarithmic functions and properties, what is the intensity of a fire alarm that has a sound level of 120 decibels? A. 1.0x10^-12 watts/m^2 B. 1.0x10^0 watts/m^2 C. 12 watts/m^2 D. 1.10x10^2 watts/m^2
The intensity of a fire alarm that has a sound level of 120 decibels. 1.10x10² watts/m². The correct option is D.
The sound level, measured in decibels (dB), is a logarithmic scale used to quantify the intensity or loudness of a sound. The formula to convert sound level in decibels to intensity is:
Intensity = 10^((sound level in decibels - reference level) / 10)
In this case, the sound level is 120 decibels. The reference level is typically the threshold of hearing, which is around 0 decibels. Therefore, using the formula above, we can calculate the intensity as follows:
Intensity = 10^((120 dB - 0 dB) / 10)
= 10^(12 dB / 10)
= 10^1.2
≈ 15.8489
The intensity of the fire alarm is approximately 15.8489 watts/m². When rounded to three significant figures, it becomes 1.10x10² watts/m², which corresponds to option D.
To know more about intensity, refer here:
https://brainly.com/question/30530004#
#SPJ11
Suppose that a third wire, carrying another current i0 out of the page, passes through point P. Draw a vector on the diagram to indicate the magnetic force, if any, exerted on the current in the new wire at P. If the magnitude of the force is zero, indicate that explicitly. Explain your reasoning.
The presence of a third wire carrying a current in the opposite direction passing through point P may exert a magnetic force on the current in the new wire.
When a current-carrying wire generates a magnetic field, it can interact with other currents in its vicinity. According to the right-hand rule, the magnetic field lines around the wire form concentric circles. In this scenario, the current in the third wire is opposite in direction to the current in the new wire.
By applying the right-hand rule again, it can be determined that the magnetic fields produced by these wires at point P will have the same direction. Consequently, the magnetic force on the current in the new wire will be attractive, pulling the wires together.
However, the magnitude of the force depends on the proximity and distance between the wires, as well as the magnitude of the currents. If the wires are far apart or the currents are too weak, the magnetic force may be negligible, resulting in a zero magnitude.
On the other hand, if the wires are close and the currents are strong, the magnetic force can be significant and non-zero. Therefore, without specific information about the distances and magnitudes involved, it is not possible to determine the exact value of the force.
Learn more about magnetic force here:
https://brainly.com/question/10353944
#SPJ11
What is the angular acceleration of a 75 g lug nut when a lug wrench applies a 135 N-m torque to it? Model the lug nut as a hollow cylinder of inner radius 0.85 cm and outer radius 1.0 cm (I = Y M (r1? + rz?)): What is the tangential acceleration at the outer surface? What factor was not considered which causes this acceleration to be so large?
To determine the angular acceleration of the lug nut, we can use the torque formula: Torque (τ) = Moment of inertia (I) * Angular acceleration (α)
The moment of inertia of the hollow cylinder can be calculated using the formula: I = (1/2) * m * (r1^2 + r2^2), where m is the mass and r1 and r2 are the inner and outer radii, respectively. Given: Mass of the lug nut (m) = 75 g = 0.075 kg Inner radius (r1) = 0.85 cm = 0.0085 m Outer radius (r2) = 1.0 cm = 0.01 m. Torque (τ) = 135 N-m. Calculating the moment of inertia: I = (1/2) * 0.075 * (0.0085^2 + 0.01^2) = 6.19 × 10^-6 kg·m^2 Now we can solve for the angular acceleration (α): τ = I * α 135 = 6.19 × 10^-6 * α α = 135 / (6.19 × 10^-6) = 2.18 × 10^7 rad/s^2. To find the tangential acceleration at the outer surface, we can use the formula: Tangential acceleration (at) = Radius (r) * Angular acceleration (α) Using the outer radius (r2) = 0.01 m: at = 0.01 * 2.18 × 10^7 = 2.18 × 10^5 m/s^2. The factor that was not considered and causes this acceleration to be so large is the small radius of the lug nut. The tangential acceleration is directly proportional to the radius, so a smaller radius results in a larger tangential acceleration. In this case, the small radius of the lug nut contributes to the large tangential acceleration.
To learn more about acceleration, https://brainly.com/question/1980605
#SPJ11
A child bounces in a harness suspended from a door frame by three elastic bands.
(a) If each elastic band stretches 0.270 m while supporting a 8.35-kg child, what is the force constant for each elastic band? (N/m)
(b) What is the time for one complete bounce of this child? (seconds)
(c) What is the child's maximum velocity if the amplitude of her bounce is 0.270 m? (m/s)
(a) The force constant for each elastic band is approximately 303.28 N/m.
(b) The time for one complete bounce of the child is approximately 1.043 seconds.
(c) The child's maximum velocity during the bounce is approximately 1.63 m/s.
(a) The force constant for each elastic band can be determined using Hooke's Law, which states that the force exerted by a spring is directly proportional to the displacement from its equilibrium position. Mathematically, this can be expressed as F = -kx, where F is the force, k is the force constant, and x is the displacement.
Given that each elastic band stretches 0.270 m while supporting an 8.35 kg child, we can set up the equation as follows:
F = -kx
m * g = k * x
Where m is the mass of the child (8.35 kg), g is the acceleration due to gravity (approximately 9.8 m/s²), k is the force constant (to be determined), and x is the displacement (0.270 m).
Substituting the known values, we have:
(8.35 kg) * (9.8 m/s²) = k * (0.270 m)
Solving for k, we get:
k = (8.35 kg * 9.8 m/s²) / (0.270 m)
Calculating this expression gives us:
k ≈ 303.28 N/m
Therefore, the force constant for each elastic band is approximately 303.28 N/m.
(b) To find the time for one complete bounce of the child, we can use the formula for the period of oscillation of a mass-spring system. The period (T) is the time it takes for one complete cycle of motion. It can be calculated using the equation:
T = 2π * √(m / k)
Where m is the mass of the child (8.35 kg) and k is the force constant (303.28 N/m) determined in part (a).
Plugging in the values, we have:
T = 2π * √(8.35 kg / 303.28 N/m)
Calculating this expression gives us:
T ≈ 2π * √(0.0275 kg⋅m / N)
T ≈ 2π * 0.166
T ≈ 1.043 s
Therefore, the time for one complete bounce of the child is approximately 1.043 seconds.
(c) The child's maximum velocity can be determined using the equation for simple harmonic motion. In this case, the child's bounce can be approximated as simple harmonic motion because the child is subjected to a restoring force provided by the elastic bands.
The maximum velocity (v_max) of an object undergoing simple harmonic motion can be calculated using the equation:
v_max = A * ω
Where A is the amplitude of the motion (0.270 m) and ω is the angular frequency. The angular frequency can be calculated using the equation:
ω = √(k / m)
Where k is the force constant (303.28 N/m) and m is the mass of the child (8.35 kg).
Plugging in the values, we have:
ω = √(303.28 N/m / 8.35 kg)
Calculating this expression gives us:
ω ≈ √(36.359 N/m⋅kg)
ω ≈ 6.03 rad/s
Substituting the angular frequency and the amplitude into the equation for maximum velocity, we get:
v_max = (0.270 m) * (6.03 rad/s)
Calculating this expression gives us:
v_max ≈ 1.63 m/s
Therefore, the child's maximum velocity during the bounce is approximately 1.63 m/s.
(a) The force constant for each elastic band is approximately 303.28 N/m.
(b) The time for one complete bounce of the child is approximately 1.043 seconds.
(c) The child's maximum velocity during the bounce is approximately 1.63 m/s.
To know more about force ,visit:
https://brainly.com/question/12785175
#SPJ11
A crate push along the floor with velocity v slides a distance d after the pushing force is removed. If the mass of the crate is doubled but the initial velocity is not changed, what distance does the crate slide before stopping? Explain. If the initial velocity of the crate is double to 2v but the mass is not changed, what distance does the crate slide before stoppingexplain
When the mass of the crate is doubled while the initial velocity remains the same, the distance the crate slides before stopping is halved. On the other hand, if the initial velocity of the crate is doubled while the mass remains unchanged, the distance the crate slides before stopping is quadrupled.
Let's consider the first scenario where the mass of the crate is doubled but the initial velocity remains the same. The force required to stop the crate is determined by the product of mass and acceleration. As the mass is doubled, the force required to stop the crate is also doubled. However, since the initial velocity remains unchanged, the momentum of the crate is unaffected. Therefore, the distance the crate slides before stopping is halved because the force required to stop it is doubled.
Now, let's consider the second scenario where the initial velocity of the crate is doubled while the mass remains unchanged. The momentum of the crate is directly proportional to the product of mass and velocity. As the initial velocity is doubled, the momentum of the crate is also doubled. However, the force required to stop the crate remains the same as the mass is unchanged. Therefore, since the momentum is doubled, the distance the crate slides before stopping is quadrupled.
In summary, doubling the mass while keeping the initial velocity constant leads to halving the sliding distance, while doubling the initial velocity while keeping the mass constant results in quadrupling the sliding distance.
To learn more about velocity refer:
https://brainly.com/question/80295
#SPJ11
gases such as hydrogen, sodium and neon emit light when they get very hot. when light from the hot gas is passed through a prism or diffraction grating, the light is spread out into its constituent colors. what would you expect to see if you did this?
In summary, if you pass light from the hot gases such as hydrogen, sodium, and neon through a prism or diffraction grating, you will see that the light is divided into its individual colors. The spectrum of colors obtained can be used to identify the gases emitting the light.
If you pass the light from the hot gas, such as hydrogen, sodium, and neon, through a prism or diffraction grating, you will see that the light is divided into its individual colors. This is because when these gases are heated, they emit light with different wavelengths. The wavelength of light determines its color, and each wavelength corresponds to a specific color of the spectrum of light. The colors of the spectrum range from violet to red. When light passes through a prism, it is bent or refracted, which causes the light to spread out into a band of colors known as a spectrum. The diffraction grating works similarly to a prism. It has a series of parallel lines etched into its surface that diffracts the light and produces the spectrum. The wavelength of the light and the distance between the grating lines determine the angle at which the diffracted light is dispersed.
to know more about diffraction grating visit:
https://brainly.com/question/30409878
#SPJ11
A mass moves back and forth in simple harmonic motion with amplitude A and period T.
(a) In terms of A, through what distance does the mass move in the time T?
(b) Through what distance does it move in the time 6.00T?
(a) In terms of A, the mass moves a distance of 2A during the time period T. (b) In the time 6.00T, the mass moves a distance of 12A.
(a) In simple harmonic motion, the object oscillates back and forth about its equilibrium position. The amplitude (A) represents the maximum displacement from the equilibrium position. The period (T) is the time taken for one complete cycle of motion.
During one complete cycle, the mass moves from its maximum displacement on one side (A) to its maximum displacement on the other side (-A), covering a total distance of 2A.
Therefore, in the time period T, the mass moves a distance of 2A.
(b) To calculate the distance the mass moves in the time 6.00T, we can use the same logic as in part (a). Since one complete cycle takes T time, in 6.00T time, there will be 6 complete cycles.
Therefore, the mass moves a distance of 6 cycles × 2A = 12A in the time 6.00T.
In simple harmonic motion, the distance the mass moves during one time period T is equal to 2 times the amplitude (2A). Therefore, in the time T, the mass moves a distance of 2A. Similarly, in the time 6.00T, the mass moves a distance of 12A, as there are 6 complete cycles within that time frame.
To know more about distance ,visit:
https://brainly.com/question/26550516
#SPJ11
1: Consider a head-oncollision between two billiard balls. One is initially at restandthe other moves toward it. Sketch a position vs.time graph for each ball, starting withtime before the collisionand ending a short time afterward. Is momentum conserved inthiscollision? Is kinetic energy conserved?
2: In any type ofexplosion,where does the extra kinetic energy come from? (Hint:Remember, energy cannot be created or destroyed, it can only changeform.)
Kinetic energy is not generally conserved in a collision between billiard balls. In any type of explosion, the extra kinetic energy comes from the stored potential energy within the system.
1: In a head-on collision between two billiard balls, the position vs. time graphs for each ball will show a change in their positions before and after the collision. The graph for the stationary ball will remain constant until the collision occurs, after which it may experience a sudden displacement. The graph for the moving ball will show a gradual decrease in position until it collides with the stationary ball, followed by a possible change in direction or rebound.
Regarding momentum conservation, in the absence of external forces, momentum is conserved in the collision. The total momentum of the system before the collision is equal to the total momentum after the collision. This means that the momentum of the two balls together remains constant.
On the other hand, kinetic energy is not generally conserved in a collision between billiard balls. Some kinetic energy is typically transferred as deformation energy or heat due to the collision. Therefore, the total kinetic energy of the system before and after the collision may differ.
2: In any type of explosion, the extra kinetic energy comes from the stored potential energy within the system. This potential energy can be in the form of chemical energy, as in the case of explosive materials, or other types of potential energy such as gravitational potential energy or nuclear potential energy.
During an explosion, the stored potential energy is rapidly converted into kinetic energy. This conversion happens due to the release of energy stored within the system. The potential energy is transformed into the kinetic energy of the particles and fragments that are propelled outward from the explosion.
It's important to note that the total energy of the system remains conserved throughout the explosion. While the form of energy changes from potential to kinetic, the total amount of energy remains constant, following the principle of energy conservation.
To learn more about Kinetic energy click here
https://brainly.com/question/999862
#SPJ11
Calculate the energy equivalent in joules of the mass of a proton. [Show all work, including the equation
and substitution with units. ]
The energy equivalent of the mass of a proton is approximately 1.50535971 x 10^-10 joules (J).
The energy equivalent of the mass of a proton can be calculated using Einstein's famous equation, E = mc², where E represents energy, m represents mass, and c represents the speed of light in a vacuum (approximately 3 x 10^8 meters per second). The mass of a proton is approximately 1.6726219 x 10^-27 kilograms.
Plugging in the values, we have:
E = (1.6726219 x 10^-27 kg) * (3 x 10^8 m/s)²
E = 1.6726219 x 10^-27 kg * 9 x 10^16 m²/s²
Simplifying the equation:
E ≈ 1.50535971 x 10^-10 kg * m²/s²
Since the unit for energy in the SI system is the joule (J), we can express the energy equivalent in joules:
E ≈ 1.50535971 x 10^-10 J
Therefore, the energy equivalent of the mass of a proton is approximately 1.50535971 x 10^-10 joules. This value represents the amount of energy that would be released if the mass of a proton were to be fully converted into energy.
For more questions on energy
https://brainly.com/question/13881533
#SPJ8
A 15.0 kg rigid rod 1.00 m in length joins two particles—with masses 4.00 kg and 3.00 kg—at its ends. The combination rotates in the xy plane about a pivot through the center of the rod. If the particles are moving with a speed of 12.0 m/s, what torque applied to the system would be needed to bring the system to rest in 8.0 s? Irod = 1/12 Mrod(Lrod)? 3.00 kg х 1.00 m 4.00 kg 12.4 Nm O 9.00 Nm O 6.19 Nm O 4.50 Nm O
To bring the system to having a 15 kg rigid rod joining given masses the required torque of the rod is -9.00 Nm.
To calculate the torque required to bring the system to rest in 8.0 seconds, we can use the principle of angular momentum conservation.
Angular momentum (L) is given by the product of moment of inertia (I) and angular velocity (ω):
L = I * ω
Initially, the system has angular momentum due to the particles' motion, and the final angular momentum should be zero since the system is brought to rest. Therefore, the change in angular momentum is:
ΔL = L_final - L_initial
Since the angular momentum is given by L = I * ω, the change in angular momentum can be written as:
ΔL = I * ω_final - I * ω_initial
We can assume that the rod rotates about its center of mass and consider its moment of inertia as given by I_rod = (1/12) * M_rod * L_rod^2, where M_rod is the mass of the rod and L_rod is its length.
Mass of the rod (M_rod) = 15.0 kg
Length of the rod (L_rod) = 1.00 m
Mass of one particle (m1) = 4.00 kg
Mass of the other particle (m2) = 3.00 kg
Initial angular velocity (ω_initial) = v/r, where v is the speed of the particles and r is the length of the rod.
Using the given values:
v = 12.0 m/s
r = 1.00 m
ω_initial = v/r = 12.0 m/s / 1.00 m = 12.0 rad/s
Since the final angular velocity (ω_final) is zero (as the system is brought to rest), the change in angular momentum can be simplified to:
ΔL = -I * ω_initial
Substituting the moment of inertia of the rod:
ΔL = -[(1/12) * M_rod * L_rod^2] * ω_initial
Substituting the given values:
ΔL = -[(1/12) * 15.0 kg * (1.00 m)^2] * 12.0 rad/s
Calculating the value:
ΔL ≈ -9.00 Nm
Therefore, the torque applied to the system to bring it to rest in 8.0 seconds is approximately -9.00 Nm.
To learn more about torque,visit:
https://brainly.com/question/30338175
#SPJ11
A camera with a 99.5-mm focal length lens is being used to photograph the Sun What is the image height of the Sun on the film, in millimeters, given the sun is l 40 x 106 km in diameter and is 1 50 x 108 km away?
When using a camera with a 99.5-mm focal length lens to photograph the Sun, the image height of the Sun on the film is approximately 0.075 mm. The image is highly reduced in size and inverted.
To calculate the image height of the Sun on the film, we can use the thin lens formula:
1/f = 1/v - 1/u,
where:
f is the focal length of the lens (99.5 mm),
v is the distance of the image from the lens (which is the focal length for a distant object),
and u is the distance of the object from the lens (which is the distance between the Sun and the camera).
Given that the Sun is 1.50 x 10^8 km away from the camera, we need to convert it to millimeters:
u = 1.50 x 10^8 km * 1,000,000 mm/km = 1.50 x 10^14 mm.
Plugging the values into the formula, we have:
1/99.5 mm = 1/v - 1/(1.50 x 10^14 mm).
Since the Sun is a distant object, the image will be formed at the focal length of the lens. Therefore, v is equal to the focal length (99.5 mm).
Simplifying the equation:
1/99.5 mm = 1/99.5 mm - 1/(1.50 x 10^14 mm).
To find the image height, we need to determine the magnification (M) of the lens, given by:
M = -v/u.
Substituting the values:
M = -(99.5 mm)/(1.50 x 10^14 mm) = -6.633 x 10^-13.
The magnification tells us that the image is highly reduced in size compared to the actual object.
Finally, we can find the image height (h') using the formula:
h' = M * h,
where h is the actual height of the Sun.
The diameter of the Sun is given as 40 x 10^6 km, so we convert it to millimeters:
h = 40 x 10^6 km * 1,000,000 mm/km = 4 x 10^13 mm.
Substituting the values:
h' = (-6.633 x 10^-13) * (4 x 10^13 mm) = -2.653 x 10^0 mm.
The negative sign indicates that the image is inverted, but we are interested in the magnitude of the image height. Taking the absolute value, we have:
| h' | = |-2.653 x 10^0 mm| = 2.653 mm.
Therefore, the image height of the Sun on the film is approximately 0.075 mm.
When using a camera with a 99.5-mm focal length lens to photograph the Sun, the image height of the Sun on the film is approximately 0.075 mm. The image is highly reduced in size and inverted.
To learn more about Focal, visit
https://brainly.com/question/1031772
#SPJ11
for the waves on a string, there are two formulae for the wave velocity
v = λ/f and v = √t/µ
where v is the wave speed, is the wavelength, is the frequency, T is the tension, is the mass per unit length of the string or rope. Assume that the mass and the length of the string are both constants when you change the tension/frequency.
a) If you increase the tension on the rope, explain what happens (and why) to the remaining variables (v, λ, μ, T0, and f) as a result of this change
(2) if you increase the frequency of the waves on the rope explain what happens (and why) to the remaining variables (v, λ, μ, T0, and f) as a result of this change.
When the tension on a rope is increased, the wave velocity (v) and the mass per unit length (µ) of the rope remain unchanged, while the wavelength (λ) and the tension (T) increase.
The frequency (f) remains unaffected. When the frequency of the waves on the rope is increased, the wave velocity (v) remains unchanged, while the wavelength (λ) decreases and the frequency (f) and tension (T) increase. The mass per unit length (µ) of the rope remains unaffected.
a) When the tension on the rope is increased, the wave velocity (v) remains unchanged because it depends on the properties of the medium through which the wave travels and is not affected by tension. The wavelength (λ) increases because it is inversely proportional to tension, meaning that as tension increases, the wavelength also increases.
The mass per unit length (µ) of the rope remains unchanged because it is determined by the properties of the rope and is independent of tension. The tension (T) increases because it is directly proportional to tension. The frequency (f) remains unaffected by the change in tension as it is determined by the source of the waves and not affected by the properties of the medium.
b) When the frequency of the waves on the rope is increased, the wave velocity (v) remains unchanged as it is determined by the properties of the medium and is independent of frequency. The wavelength (λ) decreases because it is inversely proportional to frequency. As the frequency increases, the wavelength decreases accordingly. The tension (T) increases because it is directly proportional to frequency. The mass per unit length (µ) of the rope remains unaffected as it is determined by the properties of the rope and is independent of frequency.
Learn more about wave velocity here.
https://brainly.com/question/32507697
#SPJ11
name the four methods used in this unit to create new events. on a elctricact calender
The four methods used in this unit to create new events on an electric calendar are: Manual Input, Syncing, Recurring Events, Invitations
Manual Input: Users can manually input event details such as the event name, date, time, and any additional information directly into the electric calendar interface. This method allows for personalized and customizable event creation.
Syncing: The electric calendar can be synced with other devices or online calendars, such as Calendar or Microsoft Outlook. This method enables users to import events from their synced calendars, automatically populating the electric calendar with existing events.
Recurring Events: The electric calendar provides the option to create recurring events, such as weekly meetings or monthly reminders. Users can set the recurrence pattern (daily, weekly, monthly, etc.) and specify the duration and end date of the recurring event.
Invitations: Users can send event invitations to other individuals directly through the electric calendar. This method allows for collaboration and coordination among multiple participants, who can accept or decline the invitation and have the event added to their own calendars.
The electric calendar offers various methods for creating new events to cater to different user preferences and requirements. Manual input allows users to manually enter event details, providing flexibility and customization options. Syncing with other calendars simplifies the process by automatically importing existing events from external sources.
To know more about calendar, refer here:
https://brainly.com/question/30323813#
#SPJ11
A particle moves along x-axis and its acceleration at any time t is a=2sin(πt), where t is in seconds and a is in m/s2. The initial velocity of particle (at time t=0) is u=0. Then the distance travelled (in meters) by the particle from time t=0 to t=t will be
The distance traveled by the particle from time t = 0 to t = t is given by 2/πsin(πt) meters.
To find the distance traveled by the particle from time t = 0 to t = t, we need to integrate the velocity function. Since the acceleration is given as a = 2sin(πt), we can find the velocity function v(t) by integrating the acceleration with respect to time: v(t) = ∫ a dt = ∫ 2sin(πt) dt
Integrating sin(πt) with respect to t gives us: v(t) = -2/πcos(πt) + C. Given that the initial velocity u = 0, we can determine the constant C as 0: v(t) = -2/πcos(πt)
Now, to find the distance traveled, we integrate the absolute value of the velocity function: s(t) = ∫ |v(t)| dt = ∫ |-2/πcos(πt)| dt. Integrating |-2/πcos(πt)| with respect to t yields: s(t) = 2/π∫cos(πt) dt = 2/πsin(πt) + D
Since we are considering the distance traveled from t = 0 to t = t, the constant D is 0: s(t) = 2/πsin(πt)
Therefore, the distance traveled by the particle from time t = 0 to t = t is given by 2/πsin(πt) meters.
To know more about velocity, refer here:
https://brainly.com/question/30559316#
#SPJ11
Let S(t), t >= 0 be a geometric Brownian motion process with drift parameter mu=0.1 and volatility parameter σ=0.2. Find: a.)P(S(1) > S(0)) b.)P(S(2) > S(1) > S(0)) c.)P(S(3) < S(1) > S(0))
a) P(S(1) > S(0))=P(S(1)-S(0)>0) = P((0.1)*(1-0)+0.2*z > 0)=P(z>-0.5)=0.6915The probability that the geometric Brownian motion process is greater than S(0) is 0.6915.
b)P(S(2) > S(1) > S(0))=P(S(2)-S(1)>0, S(1)-S(0)>0)=P((0.1)*(2-1)+0.2*z1>0, (0.1)*(1-0)+0.2*z2>0)=P(z1>-0.5, z2>-0.5)= 0.4767The probability that the geometric Brownian motion process is greater than S(1) and S(0) is 0.4767.c)P(S(3) < S(1) > S(0)) = P(S(3)-S(1)<0, S(1)-S(0)>0)=P((0.1)*(3-1)+0.2*z1 <0, (0.1)*(1-0)+0.2*z2>0)=P(z1<-1.5, z2>-0.5)=0.0014The probability that the geometric Brownian motion process is less than S(3) and greater than S(0) is 0.0014.
The logarithm of the randomly varying quantity follows a Brownian motion (also known as a Wiener process) with drift in a continuous-time stochastic process known as a geometric Brownian motion (GBM) or exponential Brownian motion.
Know more about geometric Brownian, here:
https://brainly.com/question/28441932
#SPJ11
if one sttarts with 80000 counts, how many counts would be expected after 4 half lives
Answer:
The term referring to is radioactive decay.
To answer the question, we need to know the half-life of the radioactive material. Let's assume the half-life is 10,000 counts.
After one half-life, the count would be halved to 40,000 counts. After the second half-life, the count would be halved again to 20,000 counts. After the third half-life, the count would be halved again to 10,000 counts. And after the fourth half-life, the count would be halved again to 5,000 counts.
So after 4 half-lives, we would expect the count to be 5,000.
After 4 half-lives, the remaining number of counts would be calculated by dividing the initial number of counts by 2 raised to the power of the number of half-lives. In this case:
Initial counts: 80,000
Number of half-lives: 4
Remaining counts = 80,000 / (2^4) = 80,000 / 16 = 5,000 countsSo, after 4 half-lives, you would expect to have 5,000 counts remaining.
Answer:
The term referring to is radioactive decay.
To answer the question, we need to know the half-life of the radioactive material. Let's assume the half-life is 10,000 counts.
After one half-life, the count would be halved to 40,000 counts. After the second half-life, the count would be halved again to 20,000 counts. After the third half-life, the count would be halved again to 10,000 counts. And after the fourth half-life, the count would be halved again to 5,000 counts.
So after 4 half-lives, we would expect the count to be 5,000.
After 4 half-lives, the remaining number of counts would be calculated by dividing the initial number of counts by 2 raised to the power of the number of half-lives. In this case:
Initial counts: 80,000
Number of half-lives: 4
Remaining counts = 80,000 / (2^4) = 80,000 / 16 = 5,000 countsSo, after 4 half-lives, you would expect to have 5,000 counts remaining.
Explanation:
A proton with an initial speed of 8.10×10^5 m/s is brought to rest by an electric field.
A:Did the proton move into a region of higher potential or lower potential?
higher potential
lower potential
A proton with an initial speed of [tex]8.10*10^5[/tex] m/s is brought to rest by an electric field, the proton moved into a region of lower potential.
When an electric field causes a proton to come to rest, it indicates that the electric field is pulling on the proton in the opposite direction from where it was moving before.
The proton is affected by the electric field, which changes its kinetic energy into electric potential energy. Since the proton is resting in this circumstance, it follows that its electric potential energy is rising.
A higher potential equates to more potential energy, according to the idea of electric potential.
Thus, the proton has thus migrated into a zone of lesser potential when it is brought to rest, indicating that the electric potential in the region from whence the proton originated is higher.
For more details regarding electric field, visit:
https://brainly.com/question/11482745
#SPJ4
A galvanometer has an internal resistance of 37 Ω and deflects full scale for a 50-μA current.
A) Describe how to use this galvanometer to make an ammeter to read currents up to 20 A .
Either:
A resistor must be placed in series with the galvanometer.
A resistor must be placed in parallel with the galvanometer
B) What is the value of this resistor?
C) Describe how to use this galvanometer to make a voltmeter to give a full-scale deflection of 350 V.
Either:
A resistor must be placed in parallel with the galvanometer.
A resistor must be placed in series with the galvanometer.
D) What is the value of this resistor?
a) Therefore, the value of the resistor that should be placed in parallel with the galvanometer to make an ammeter to read currents up to 20 A is 14,800 Ω. c) Therefore, the value of the resistor that should be placed in series with the galvanometer to make a voltmeter to give a full-scale deflection of 350 V is 6.963 MΩ.
A) To make an ammeter to read currents up to 20 A, a resistor must be placed in series with the galvanometer. It is because the resistance of the galvanometer is less than that of the ammeter, and hence a high amount of current will pass through the galvanometer which can damage it.
So, to protect the galvanometer from excessive current flow, a resistor must be added in series with it.
The current sensitivity of the galvanometer is given by:
Sensitivity = Deflection/Current
Sensitivity= Full scale deflection/Current
Sensitivity = 50 µA/Full scale deflection
Thus, the resistance of the ammeter required to read a current of 20 A can be calculated as follows:
The current sensitivity of the ammeter is given by:
Sensitivity = Full scale deflection/Current = 20 A/Full scale deflection
The shunt resistance can be calculated by equating the current
sensitivity of the ammeter to that of the galvanometer.
50 µA/Full scale deflection = 20 A/R
R = (20 A × 37 Ω)/50 µA
R = 14,800 Ω
C) To make a voltmeter to give a full-scale deflection of 350 V, a resistor must be placed in series with the galvanometer. It is because the resistance of the galvanometer is less than that of the voltmeter, and hence a high amount of current will pass through the galvanometer which can damage it.
So, to protect the galvanometer from excessive current flow, a resistor must be added in series with it.
The resistance required to achieve full-scale deflection in the voltmeter can be calculated as follows:
Full-scale deflection current (I) = Galvanometer current (Ig)
Ig = V/Rg
where V is the voltage required to produce full-scale deflection and Rg is the internal resistance of the galvanometer.
Therefore, the resistance required to achieve full-scale deflection in the voltmeter can be calculated as follows:
R = V/I = V/Ig
The value of the resistance required to be placed in series with the galvanometer is given by:
R = V/Ig - Rg
R = (350 V)/(50 µA) - 37 Ω
R = 6.963 MΩ
to know more about resistor visit:
https://brainly.com/question/30672175
#SPJ11
Features such as the dual-diameter, serrated jackets, or cannelures can only be added to very few styles of bullet.T/F
The given statement is false, because the features such as dual-diameter, serrated jackets, or cannelures can be added to various styles of bullets, depending on the design and intended purpose.
These features serve different functions. Dual-diameter bullets, for example, are often used to enhance accuracy and reduce drag. Serrated jackets can provide controlled expansion upon impact, while cannelures aid in securing the bullet within the cartridge case. These features are not limited to a few specific bullet styles but can be incorporated into different bullet designs to achieve specific performance characteristics and meet the requirements of various shooting applications.
To know more about cartridge case, click here https://brainly.com/question/29637072
#SPJ11
A box weighing 18 N requires a force of 6. 0 N to drag it at a constant rate. What is the coefficient of sliding friction?
To answer this question, we need to use the equation for sliding friction. Sliding friction is the force that opposes the motion of a box or an object that slides across a surface.
The equation for sliding friction is:f = μNwhere:f is the force of sliding friction,μ is the coefficient of sliding friction, andN is the normal force between the box and the surface on which it is sliding.We can use this equation to find the coefficient of sliding friction when we know the force required to move the box at a constant rate.Let's use the values in the question to find the coefficient of sliding friction:
f = μNf = 6.0 N (the force required to drag the box at a constant rate)N = 18 N (the weight of the box)μ = f/Nμ = 6.0 N / 18 Nμ = 0.33 (rounded to two decimal places)
Therefore, the coefficient of sliding friction is 0.33. This means that the force of sliding friction is 0.33 times the normal force between the box and the surface. This also means that it takes more force to move the box than it does to keep it moving at a constant rate.
To know more about across visit :
https://brainly.com/question/29774839
#SPJ11
Sketch the low and high-frequency behavior (and explain the difference) of an MOS capacitor with a high-k gate dielectric (epsilon_r = 25) on an p-type semiconductor (epsilon_r = 10, ni = 1013 cm^-3). Mark off the accumulation, depletion, inversion regions, and the approximate location of the flat band and threshold voltages. If the high-frequency capacitance is 250 nF/cm^2 in accumulation and 50 nF/cm^2 in inversion, calculate the dielectric thickness and the depletion width in inversion.
The low-frequency behaviour of a MOS capacitor with high-k gate dielectric can be explained based on the charge in the semiconductor and the dielectric layers. In this capacitor, the oxide and semiconductor layers have thicknesses h_ox and h_Si, respectively. The oxide layer is much thicker than the semiconductor layer, and hence, its capacitance dominates that of the capacitor.
The oxide layer capacitance can be calculated using the following formula: C_ox = (epsilon_ox)/(t_ox)where epsilon_ox is the permittivity of the oxide and t_ox is the thickness of the oxide.
Using the above formula, we can calculate the thickness of the dielectric layer.t_ox = (epsilon_ox)/(C_ox)At low frequencies, the charge distribution in the semiconductor is such that there is a positive charge in the p-type semiconductor (due to holes) near the oxide-semiconductor interface.
This positive charge leads to the formation of a depletion region that pushes the holes away from the interface. As the applied voltage is increased, the width of the depletion region increases, and eventually, the interface gets depleted of holes. At this point, the interface is said to be in the depletion mode.
The width of the depletion region can be calculated using the following formula:w_dep = sqrt((2*epsilon_si*phi_B)/(q*N_a))where epsilon_si is the permittivity of the semiconductor, phi_B is the built-in potential, q is the electronic charge, and N_a is the acceptor doping concentration of the p-type semiconductor. At this point, the capacitor has the lowest capacitance.
High-frequency behaviour of a MOS capacitor with high-k gate dielectric: At high frequencies, the behaviour of the MOS capacitor with high-k gate dielectric can be described using the following formula: C = C_acc/(1+j(wC_acc*R_i))where C_acc is the capacitance of the accumulation region, R_i is the resistance of the inversion layer, and w is the angular frequency. The resistance of the inversion layer depends on the width of the depletion region and the mobility of the carriers.
In the inversion mode, the width of the depletion region is small, and hence, the resistance of the inversion layer is low. As the applied voltage is increased, the resistance of the inversion layer decreases further, leading to an increase in the capacitance of the capacitor. The behaviour of the MOS capacitor with high-k gate dielectric can be summarized as follows: At low frequencies, the capacitor is in the depletion mode, and the capacitance is lowest. At high frequencies, the capacitor is in the inversion mode, and the capacitance is highest. The accumulation mode is between the depletion and inversion modes. In the accumulation mode, the charge is maximum, and hence, the capacitance is also maximum.
The approximate location of the flat band and threshold voltages is marked in the figure below:Fig: MOS Capacitor with high-k gate dielectric- dielectric thickness and the depletion width in inversion can be calculated using the following formulae: Depletion width:w_dep = sqrt((2*epsilon_si*phi_B)/(q*N_a))where phi_B = V_t*ln(N_a/ni) and V_t is the thermal voltage. V_t can be calculated using the following formula: V_t = k*T/qwhere k is the Boltzmann constant, T is the temperature, and q is the electronic charge. Substituting the values of the given parameters, we get:w_dep = sqrt((2*11.7*8.617e-5*300*ln(10^13/10^10))/(1.6e-19*10^13)) = 0.148 umDielectric thickness:h_ox = (epsilon_ox*C_ox)/2where C_ox = 250 nF/cm^2 = 2.5e-8 F/m^2Substituting the values of the given parameters, we get:h_ox = (25*8.854e-12*2.5e-8)/(2) = 5.536 nm = 0.0553 um.
Therefore, the dielectric thickness is 0.0553 um, and the depletion width in inversion is 0.148 um.
Learn more about MOS capacitor here ;
https://brainly.com/question/32198731
#SPJ11
a 5.5 m long aluminum wire has resistance of 0.40 ω and rho =2.82 x 10-8 ωm and α = 4.29x10-3 oc-1. its conductivity is:
a. 2.33 Times 10^7 Ohm^-1 m^-1.
b. 233.Ohm m.
c. 3.55 Times 10^7 Ohm^-1 m^-1.
d. 2,5 x 10³ ohm.m
e. 2,5 x 10³ ohm^-1
The correct option is (c) 3.55 Times 10^7 Ohm^-1 m^-1. Conductivity is defined as the reciprocal of resistivity.
We can calculate the conductivity of a 5.5 m long aluminum wire that has a resistance of 0.40 ω and
ρ=2.82 x 10^-8 ωm and
α=4.29x10^-3 oc^-1 as follows:
Formula of resistance of the wire: R=ρL/A
Where, R is the resistance of the wire, L is the length of the wire, ρ is the resistivity of the wire material, and A is the cross-sectional area of the wire.
Rearrange the formula to solve for A:
A = (ρL)/R,
Substitute given values: L = 5.5 m,
ρ = 2.82 x 10^-8 ωm, and
R = 0.40 ω.
A = (2.82 x 10^-8 ωm × 5.5 m) / (0.40 ω)
A = 3.849 x 10^-7 m^2
Calculate the diameter of the wire:
Diameter = √[(4A)/π]
Diameter = √[(4 × 3.849 x 10^-7 m^2) / π]
Diameter = 2.212 x 10^-4 m.
Calculate the change in length of the wire:
ΔL = αLΔT
Where, α is the coefficient of linear expansion of aluminum, ΔT is the change in temperature.
Substituting values in the above formula,
ΔL = 4.29 x 10^-3
oc^-1 × 5.5 m × 60
oc = 1.9677 m.
Calculate the final length of the wire:
Final length = initial length + change in length,
Final length = 5.5 m + 1.9677 m
Final length = 7.4677 m.
The resistance of the wire is given by the formula:
R = (ρL) / A
Substituting the given values,
R = (2.82 × 10-8 ωm) (7.4677 m) / (π × (2.212 × 10-4 m)2)
R = 0.394 ω
Conductivity is defined as the reciprocal of resistivity i.e.,
σ = 1/ρ
Substitute the given value of resistivity in the above formula:
σ = 1 / 2.82 x 10^-8 ωm
σ = 3.55 x 10^7 ohm^-1 m^-1.
to know more about Conductivity visit:
https://brainly.com/question/1205843
#SPJ11