Answer:
Sn, Q,Au, Al,Pb
Explanation:
Because thats hw that works
HOPE IT HElPS
Which scenario is an example of primary succession?
A.
the formation of soil after a volcano
B.
the growth of weeds after a flood
C.
the establishment of a forest in an abandoned crop field
D.
the recovery of grassland after a fire
Answer:
the answer to your question is A
Using the balanced equation below,
how many grams of cesium xenon
heptafluoride would be produced
from the complete reaction of 37.8 g
cesium fluoride?
CsF + XeF6 => CsXeF7
Answer:
Mass of CsXeF₇ = 99.3 g
Explanation:
Given data:
Mass of CsF = 37.8 g
Mass of CsXeF₇ produced = ?
Solution:
Balance chemical equation:
CsF + XeF₆ → CsXeF₇
Number of moles of CsF:
Number of moles = mass/molar mass
Number of moles = 37.8 g/ 152 g/mol
Number of moles = 0.25 mol
Now we will compare the moles of CsF with CsXeF₇ from balance chemical equation:
CsF : CsXeF₇
1 : 1
0.25 : 0.25
Mass of CsXeF₇ :
Mass = number of moles × molar mass
Number of moles = 0.25 mol × 397.2 g/mol
Mass = 99.3 g
Answer:
98.84
Explanation:
In Ernest Rutherford's gold foil experiments, some alpha particles were deflected from their original paths, but most passed through the foil with no deflection. Which statement about gold atoms is supported by these experimental observations?
Gold atoms consist mostly of empty space.
Gold atoms are similar to alpha particles.
Alpha particles and gold nuclei have opposite charges.
Alpha particles are less dense than gold atoms.
Answer:
A
Explanation:
How quickly an object
accelerates is directly related
to the_____________
of the object
and the size of the___________
applied to it.
Answer:
How quickly an object accelerates is directly related to the Mass of the object and the size of the Force applied to it.
Explanation:
Acceleration is directly proportional to force and inversely proportional to mass. This means that if you get pushed, the harder you are pushed, the faster you'll move (accelerate).
What is the relationship between force and acceleration?
Newton's second law shows that there is a direct relationship between force and acceleration. The greater the force that is applied to an object of a given mass, the more the object will accelerate. For example, doubling the force on the object doubles its acceleration.
What is the relationship between mass and acceleration?
The acceleration of an object depends directly upon the net force acting upon the object, and inversely upon the mass of the object. As the force acting upon an object is increased, the acceleration of the object is increased. As the mass of an object is increased, the acceleration of the object is decreased.
Which part of Earth absorbs the most sunlight? brainly
Answer:
the answer is A)Oceans
Explanation:
Which of the following statements concerning the measured number 0.3030
is correct? *
a) Only one of the zeros in the number is significant
b) Rounded off to 2 significant figures the number becomes 0.30.
c) Expressed in scientific notation the number becomes 3.03 x 10-1.
O
d) more than one correct response
e) no correct response
der below
Please explain why your answer is correct and why the others are incorrect :)
Answer:
C
Explanation:
If you move the decimal to the left it transforms the expression into scientific notation.
what is the main function of this organelle in the cell?
Answer:
[tex]to \: use \: energy \: from \\ \: sunlight \: to \: make \: sugars.[/tex]
Explanation:
[tex]the \: main \: function \: of \: this \: organelle \\ \: in \: the \: cell \: is \: to \: use \: energy \: from \\ \: sunlight \: to \: make \: sugars.[/tex]
Which best explains the formation of polyester?
a condensation polymerization of a carboxylic acid and an alcohol
an addition polymerization of a carboxylic acid and an alcohol
a condensation polymerization of two alcohols
an addition polymerization of two alcohols
Answer:
The correct answer is - a condensation polymerization of a carboxylic acid and an alcohol
Explanation:
Condensation polymerization is a type of polymerization that forms a byproduct by the bonding of two different types of monomers during polymerization.
Polyester is an example of condensation polymerization which is formed by the polymerization of carboxylic acid and an alcohol monomer. In addition polymerization, there is only one type of monomers bond together.
Answer:
A. a condensation polymerization of a carboxylic acid and an alcohol
Explanation:
4. Know the location of metals, non-metals and metalloids
Answer:
The metals are to the left of the line (except for hydrogen, which is a nonmetal), the nonmetals are to the right of the line, and the elements immediately adjacent to the line are the metalloids.
Hope this helped
an atomic mass unit is defined exactly as
Answer:Atomic mass is the mass of an atom in atomic mass units (amu)
Atomic mass
• atomic mass (sometimes called atomic weight) is the mass of the atom in atomic mass units (amu). (from periodic table)
o One atomic mass unit is defined as a mass exactly equal to one-twelfth the mass of one carbon-12 atom. Carbon-12 is the carbon isotope that has six protons and six neutrons. Setting the atomic mass of carbon-12 at 12 amu provides the standard for measuring the atomic mass of the other elements.
o For example, experiments have shown that, on average, a hydrogen atom
Deciding that she was thirsty, Ms. Smith decided to mix up some lemonade using 2 tablespoons of lemonade, and 2 cups of water. What is the solute and solvent?
Explanation:
solute is the substance being dissolved so that is the 2 tablespoons of lemonade and the 2 cups of water is the solvent.
what is the mass of a 7.91 cm cubed piece of lead having a density of 11.34 g/cm cubed
Answer:
The answer is 89.70 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
density = 11.34 g/cm³
volume = 7.91 cm³
We have
mass = 11.34 × 7.91 = 89.6994
We have the final answer as
89.70 gHope this helps you
The quantum mechanical model...
a
describes electrons as moving through specific circular orbits, and not staying in one place.
b
places electrons in fixed positions, not moving through specific orbits or orbitals.
c
describes electrons as moving anywhere in the atom, not specific circular orbits.
d
describes electrons as moving through cloud-like orbitals, not specific circular orbits.
Which is the name of O3?
dioxide
oxygen
trioxygen
monoxide
The answer is C, Trioxygen
The name for O₃ molecule is trioxygen as it is made up of three oxygen atoms.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ6
Scientists have changed the model of the atom as they have gathered new evidence. One of the atomic models is shown below. A purple center outlined in black with two concentric black circles around the center, the inner circle having 2 small green balls on it and the outer circle having 8 small green balls on it. What experimental evidence led scientists to change from the previous model to this one? A few of the positive particles aimed at a gold foil seemed to bounce back. The colors of light emitted from heated atoms had very specific energies. Experiments with water vapor showed that elements combine in specific proportions. Cathode rays were bent in the same way whenever a magnet was brought near them.
Answer:
B: The colors of light emitted from heated atoms had very specific energies.
Explanation:
dont know if its the same question i had on edg but i think its B. Sorry if i didnt understand the question :)
Answer:
b
Explanation:
-79.6 -80 -81.2. is the correct answer
What is the effect of tap water, sea water, and rainwater on the rusting rate of iron?
(Please i need an answer π-π)
Answer:
The more acidic the solution the faster it rusts. More Na = more rust
Explanation:
A balloon is a sphere with a radius of 5.0 m. The force of air against the walls of the balloon is 45 N. What is the air pressure inside the balloon? Surface area = 12.56 × radius² 1 Pa = 1 N/m² How would I solve this problem? What are the steps or a good way to remeber how to solve?
Answer:
0.127 N/m² or 0.127 Pa
Explanation:
From the question given above, the following data were obtained:
Radius (r) = 5 m
Force (F) = 40 N
Pressure (P) =.?
Next, we shall determine the Surface area of the sphere (i.e the balloon). This can be obtained as follow:
Surface area = 12.56 × r²
Radius (r) = 5 m
Surface area = 12.56 × 5²
Surface area = 12.56 × 25
Surface area = 314 m²
Finally, we shall determine the pressure as follow:
Force (F) = 40 N
Surface area = 314 m²
Pressure (P) =.?
Pressure = Force /Area
Pressure = 40/314
Pressure = 0.127 N/m² = 0.127 Pa
Therefore, the pressure inside the balloon is 0.127 N/m² or 0.127 Pa.
(100 POINTS) When thermal energy (heat) is added to a reaction, it happens _________ (faster or slower)
When thermal energy (heat) is removed from a reaction, it happens _________ (faster or slower)
Answer:
1) faster
2) slower
Explanation:
Answer:
faster
Explanation:
Which elements are likely to close electrons?
Answer:
Explanation:
In general, metals will lose electrons to become a positive cation and nonmetals will gain electrons to become a negative anion. Hydrogen is an exception, as it will usually lose its electron. Metalloids and some metals can be can lose or gain electrons.
Stan gets frustrated while working on his math homework, and he tears his paper into several pieces. What kind of change has his
paper gone through?
Answer:
Physical Change
Explanation:
What is a physical change? A physical change is a change to the physical—as opposed to chemical—properties of a substance. They are usually reversible. The physical properties of a substance include such characteristics as shape (volume and size), color, texture, flexibility, density, and mass.
d.
both a
5. It dissolves more substances than any other?
a. sugar
b. salt
c. water
d. pebble
salt
Explanation:
I hope this answer is right
Ni(OH)3 +
Pb(SO4)2 →__Pb(OH)4 +
Ni2(SO4)3
what is the balance
Answer:
4+3=3+3+2
Explanation:
4Ni(oh)3+3pb(so4)2=3pb(oh)4+2Ni2(so4)3
Do you think your meal would allow your cells to sufficiently build your cell
membranes? Why or why not?
Answer:
Cells are the fundamental units of life ' the bricks from which all your. which are built of your cells, will become compromised, and you can. of these new cells from the nutrients you get in your food is one way. Let's take a look inside one of your cells and see what the nutrients really do.
Explanation:
the making of ice cubes is an endothermic reaction
Answer:
no
Explanation:
it is not endothermic reaction
Please can I have help on these two questions I’ll be very grateful!!!!!!
Answer:
-1 IS THE CHARGE OF ELECTRON AS THEY ARE NEGATIVE
MARK ME AS BRAINLIEST IF U FOUND IT HELPFUL
One way to separate the different kinds of matter in a mixture is through
A. filteration
B. decomposition
C. electrolysis
D. chemical reactions
One way to separate the different kinds of matter in a mixture is through filtration. The correct option is A.
What is filtration?Filtration is a physical or mechanical process by which two or more substances are of different compositions. These substances can be solid, liquid, or gas.
There are three types of filtration. These are mechanical, chemical, and biological. The different types of filtration are based on a similar principle, which is a mixture of several types poured onto a filter membrane. A specific size of the pore is present in the filter membrane.
The other options are decomposition, which is a process of breaking down substances. Electrolysis is separating charged ions and chemical reactions to form compounds.
Thus, the correct option is A. filtration.
To learn more about filtration, refer to the link:
https://brainly.com/question/14530470
#SPJ6
If I have 12 protons, how many neutrons and electrons would I need to make a stable atom?
Answer:
im pretty sure you need 15 in all but dont get mad it thats wrong, so you would i think need 3 neutrons
Explanation:
In an atom, there are 12 electrons and protons while the number of neutrons is 6.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ2
Write the chemical formula for each binary ionic compound
Number 8 please
A
B
C
D
E
F
Answer:
A. K2S
B. Li2Se
C. ZnO
D. RbBr
E. Cs2S
F. Sr3N2
Explanation:
Which is the control center for the endocrine system?
O the thymus
the hypothalamus
the pancreas
o the thyroid
Answer: the hypothalamus
Thank you for the answer, it is much appreciated, and if you haven't seen it already, it is B.
Answer:
The answer is B on edge
Explanation: