Question:
At a sports event, the car starts from rest. in 5.0 s its acceleration is 5.0 m/s2. Calculate the distance travelled by car.
Answer:
62.5 metres
Explanation:
Given
[tex]u = 0[/tex] -- Initial Velocity
[tex]a = 5.0m/s^2[/tex] --- acceleration
[tex]t =5.0s[/tex] -- time
Required
Calculate the distance
This question will be solved using the following equation of motion
[tex]S = ut + \frac{1}{2}at^2[/tex]
Where S represents the distance
Substitute values for u, t and a
[tex]S = 0 * 5.0 + \frac{1}{2} * 5.0 * 5.0^2[/tex]
[tex]S = 0 + \frac{1}{2} * 5.0 * 25.0[/tex]
[tex]S = \frac{1}{2} * 5.0 * 25.0[/tex]
[tex]S = \frac{1}{2} * 125.0[/tex]
[tex]S = 62.5m[/tex]
Hence, the distance travelled is 62.5m
How Many displacement vectors shown in the figure above have horizontal components
Answer:
I think it's 5.
Explanation:
Answer: 4 vectors
Explanation:
The mass of an electron is A) equal to the mass of a proton B) less than the mass of a neutron C) greater than the mass of a proton D) equal to the mass of a neutron
Answer:
B
Explanation:
Atomic structure contains electrons, protons and neutrons.
Electron is very light compared to proton and neutrons.
Given that the mass of an electron is
A) equal to the mass of a proton
B) less than the mass of a neutron
C) greater than the mass of a proton
D) equal to the mass of a neutron
The correct answer is B which is less than the mass of the neurons.
(a) As you ride on a Ferris wheel, your apparent weight is different at the top and at the bottom. Explain. (b) Calculate your apparent weight at the top and bottom of a Ferris wheel, given that the radius of the wheel is 7.2 m, it completes one revolution every 28 seconds, and your mass is 55 kg.
Answer:
a. The component of the net force which make up the apparent weight are added to each other at the bottom and subtracted (the centripetal force from the weight) at the top)
b. Apparent weight at the top is approximately 519.06 N
Apparent weight at the bottom is approximately 558.94 N
Explanation:
a. The apparent weight at the top is different from the apparent weight at the bottom of a moving Ferris wheel because of the opposite direction in which the centripetal force acts at the top and the bottom, which are upwards and downwards respectively, while the weight acts downwards constantly
b. The given parameters are
The radius of the Ferris wheel, r = 7.2 m
The period for one complete revolution, t = 28 seconds
The angle covered in one revolution, θ = 2·π radian
The mass of the person riding on the Ferris wheel, the passenger = 55 kg
Therefore, we have;
The angular speed, ω = Δθ/Δt = 2·π/(28)
From which we have;
Centripetal force, [tex]F_c[/tex] = m × ω² × r
Substituting the known values, we have [tex]F_c[/tex] = 55 kg × (2·π/(28 s))² × 7.2 m ≈ 19.94 N
The centripetal force, [tex]F_c[/tex] = 19.94 N always acting outward from the center
Weight = Mass × Acceleration due to gravity
The weight of the passenger = 55 kg × 9.8 m/s² = 539 N
The weight of the passenger = 539 N always acting downwards
At the top of the Ferris wheel the the centripetal force is acting upwards and the weight is acting downwards
Therefore;
The net force, which is the apparent weight of the passenger at the top [tex]F_{NET_{Top}}[/tex] = 539 N - 19.94 N ≈ 519.06 N
Apparent weight at the top ≈ 519.06 N
At the bottom of the Ferris wheel the weight is acting downwards and the centripetal force is also acting downwards
Therefore;
The net force at the bottom, which is the apparent weight of the passenger at the bottom [tex]F_{NET_{bottom}}[/tex] = 539 N + 19.94 N ≈ 558.94 N
Apparent weight at the bottom ≈ 558.94 N.
Asha walks 15 m west, then 20 m north, then 15 m east. Calculate the distance and displacement
covered by Asha.(a) (Numbering problem)_
Answer:
Asha traveled a distance of 50 m
The displacement is 20 m north.
Explanation:
Distance and Displacement
A moving object constantly travels for some distances at defined periods of time. The total moved distance is the sum of each individual distance the object traveled. It can be written as:
dtotal=d1+d2+d3+...+dn
This sum is obtained independently of the direction the object moves.
The displacement only takes into consideration the initial and final positions of the object while moving. The displacement, unlike distance, is a vectorial magnitude and can even have magnitude zero if the object starts and ends the movement at the same point.
Asha walks 15 m west, 20 m north, and 15 m east. The total distance is
dt=15 m + 20 m + 15 m = 50 m
Asha traveled a distance of 50 m
Note the final position is 20 m above the initial position since she goes 15 m west and 15 m east. Thus the displacement is 20 m north.
can you draw it please
Answer:
Ammeters are connected in series and voltmeters are connected in parallel in a circuit
what is the meaning of habitat
Answer: In ecology, habitat identifies as the array of resources, physical and biotic factors, present in an area that allow the survival and reproduction of a particular species. A species habitat can be seen as the physical manifestation of its ecological niche.
Explanation:
Mr. D's dog Gromit jumped out of a second story window (through the screen) and fell to the ground below. The window is 15 feet high, the acceleration of gravity is 9 m/s', and there are 3.28 feet in each meter. What was the final velocity of this crazed dog? (True story, don't worry he's fine and now he knows about gravity)
Answer:
Vf = 9.46 m/s
Explanation:
In order to find the final velocity of the dog we can use third equation of motion:
2gh = Vf² - Vi²
where,
g = acceleration due to gravity = 9.8 m/s²
h = height of window = (15 ft)(1 m/3.28 ft) = 4.57 m
Vf = Final Velocity of Dog = ?
Vi = Initial Velocity of Dog = 0 m/s
Therefore,
(2)(9.8 m/s²)(4.57 m) = Vf² - (0 m/s)²
Vf = √(89.572 m²/s²)
Vf = 9.46 m/s
Your maximum heart rate is the maximum number of times your heart can contract in one minute
True or false
Answer:
True
Explanation:
It is true i am right
A parallel circuit is shown in the diagram above. In this case the current supplied by the battery splits up, and the amount going through each resistor depends on the resistance. If the values of the three resistors are: R1 = 82, R2=82, and R3 = 42, the total resistance is found by: 1/R = 1/8+1/8+ 1/4 = 1/2. This gives R = 22. With a 10 V battery, by V = 1 R the total current in the circuit is: I = V/R = 10/2 = 5 A. The individual currents can also be found using I = V/R. The voltage across each resistor is 10 V, so the resistance across R1 : 2.5A 1.25V 2.5V 1.25A
Answer:
Huh is there options?
Explanation:
XD I dont understand have a good day tho a better person and smarter person will answer this for u
What happens when the falling object reaches its terminal velocity? It will stop _________
and fall at a constant rate of _____________. Terminal velocity means an object is no longer in free fall and travels at a constant rate of _______________.
fill in the blanks and I will give you brianestest!(Can't spell)PLZZZZ
!
Answer:
LOL i don't even know
Explanation:
Which best defines gravity?
A. The tendency of objects to fall from trees
B. An attractive force between two objects due to their mass
C. The amount of matter in an object
D. The rate at which objects fall to earth
Answer:
B. An attractive force between two objects due to their mass
Explanation:
Answer:
B
Explanation:
Gravity is a force that pulls 2 objects towards each other and varies depending on mass. The earth for example is large enough to have a gravitational force that keeps us down. The sun has a gravitational force that keeps the Earth in orbit.
What measurement do we use to determine the amount of force used to move an object by a simple machine
Answer:
Newtons.
Explanation:
Force is given by the multiplication of mass and acceleration.
Mathematically, Force is;
[tex] F = ma[/tex]
Where;
F represents force measured in Newton.
m represents the mass of an object measured in kilograms.
a represents acceleration measured in meter per seconds square.
Newtons is a measurement we use to determine the amount of force used to move an object by a simple machine. It is the International System of Units (SI) used to measure force and has a symbol of N.
Basically, it was named after Sir Isaac Newton based on his fundamental works in the field of mechanics (motions).
When the net force on an object is zero, what do we know about the motion of that object
Answer:
The objects speed or motion does not change if the net force is 0.
Explanation: There basically doesn't have anything acting on it so it stays put.
Which diagram best shows the results of removing heat from the original sample until it freezes?
Answer:
b
Explanation:
the closest molecules are in b witch would be a solid
Which of the following is the minimum amount of work done by a hydraulic lift
to raise a 150-kg aluminum block 2.0 m vertically?
Answer: 300 J
Explanation:
Force = 150 KJ
Distance = 2.0 m
The minimum amount of work done by a hydraulic lift to raise a 150-kg aluminum block 2.0 meters vertically would be 2940 Joules, as the work done is the product of the force applied to the displacement of the object, therefore the correct answer is option B.
What is work done?The total amount of energy transferred when a force is applied to move an object through some distance
The work done is the multiplication of applied force with displacement.
Work Done = Force × Displacement
As given in the problem we have to find out the minimum amount of work done by a hydraulic lift to raise a 150-kg aluminum block 2.0 meters vertically.
The minimum work done = 150 × 9.8 × 2
= 2940 Joules
Thus, The minimum amount of work done by a hydraulic lift to raise a 150-kg aluminum block 2.0 meters vertically would be 2940 Joules.
To learn more about the work done, refer to the link given below ;
brainly.com/question/13662169
#SPJ6
A glass prism causes dispersion or deviation but glass plate doesn't.why?
Answer:
hope this answer helps you.
The slope of a position-time graph can be used to find the moving obiects
Answer:
Is this a true and false statement?
Explanation:
Using the statistical definition of entropy, what is the entropy of a system where W = 4?
A. 1.87 × 10–23 joules/kelvin
B. 1.56 × 10–23 joules/kelvin
C. 1.91 × 10–23 joules/kelvin
D. 2.07 × 10–23 joules/kelvin
Answer: S = 1.91x10^(-23) J/K
Explanation:
The statistical definition of entropy says that:
S = k*Ln(W)
where:
W is the number of macrostates, in this case W = 4.
k is a constant:
k = 1.38x10^(-23) J/K
then the entropy of this system will be:
S = (1.38x10^(-23) J/K)*ln(4) = 1.91x10^(-23) J/K
Then the correct option is C.
Answer:
C. 1.91 × 10–23 joules/kelvin
can i be marked brainiest, please? Explanation:
the acceleration due to gravity of the moon is 1.67
Answer:
I think it's 1.625 m/s2
Alex wants to learn how to surf, but he is not a strong swimmer. He knows he needs to increase his ability to paddle out in order to catch the best waves. Which piece of advice would you give to help him get started on reaching his goal? He should swim at least three times a week at the community pool to build stamina. He should tread water every day to get more comfortable in the water. He should purchase the best surfboard he can afford because it will help him paddle faster. He should watch your friend who is a competitive surfer practice to learn her technique.
Answer:
He should swim at least three times a week at the community pool to build stamina.
Explanation:
Calculate the kinetic energy of a 50 kg cart moving at a speed of 7.1 m/s.
ill give u 100 points if you give me the right answer.
══════════XXX═════════════
[tex]\huge\boxed{\fcolorbox{black}{yellow}{HOPE\: IT \: HELPS}}[/tex]
HOPE IT HELPS
[tex]\begin{gathered}\begin{gathered}\\\huge\underline{ \mathbb\blue{Please}\:\mathbb\green{Mark}\:\mathbb\orange{As}}\:\end{gathered}\end{gathered}[/tex]
Please Mark As
[tex]\huge\underline{ \mathbb\red{Brilliant}\:\mathbb\purple{Answers}}[/tex]
Brilliant Answers
pls help me with this
Answer:
A screw
Explanation:
State two devices that transfer heat out of a cool environment into a warm environment
Answer:
Heat pump
Refrigerators
Explanation:
Some devices like heat pump and refrigerators used transfers of thermal energy in a cool region to warm other region.
These types of devices used for transferring heat energy by thermal conduction method.
1. A student notices that wearing darker colors in sunlight makes him feel warmer, so he decides to conduct an experiment. He takes five pieces of different-colored cloth and wraps
each one around a water bottle. He then places all five bottles in direct sunlight and measures the temperature of the water in each bottle an hour later.
What should be kept constant throughout this experiment?
O the color of the cloth
O the temperature of the water
the amount of water in each bottle
O the temperature of the outside air
Answer: the color of the cloth
Explanation:
If clouds were made of cotton-candy what is rain
Answer:
If clouds were made of cotton candy, I think rain would be soda.
Or liquified sugar.
:)
Answer:
Liquid Sugar
Explanation:
For an example, let's look at normal clouds. They're made of water vapor, and when they rain it's because the water vapor condenses and forms a droplet heavy enough that it falls out of the sky. In both sides of the equation, they're still made out of water. So, logically, cotton candy is made almost 100% with sugar, right? All that's happened is the sugar is heated and liquified and pushed through very small holes until they cluster together and form the fluffy treat you know today. Back to the leading question, though: "If clouds were made of cotton-candy, what is rain?". Rain is the liquid form of clouds (gas), and cotton candy is the (solid) form of itself. So in order for it to rain, it needs to liquefy itself. When melted at 367°F, sugar becomes a liquid, so in that case THAT is what cotton candy would rain if it were a cloud.
≧◡≦
Mocha here! If this answer helped you, please consider giving it brainliest because I would appreciate it greatly. Have a wonderful day!
General relativity can be used to calculate what?
Answer:
Equation for general relativity
Explanation:
I have to make three videos for physics about Newton's three laws of motion but I don't want to be in the videos or talk in them. Any ideas on how I could do that?
Answer:
You should face your fears sometimes, and get in front of a crowd do present your ideas. Not everyone is good at it, and many people get anxious when they have to speak in front of people but it’s best if you just do it and get it over with and maybe it won’t be as intimidating next time :)
I dropped the ball from the roof of a building the speed when I hit the ground is 52 m/s how tall is the building
Answer:
Height of building = 135.2 m
I need help with science
Answer:
saaaaame
Explanation:
A race car makes one lap around a track with a radius of 41 meters in 8 seconds. What is the velocity?
Answer:
31.21 m/s
Explanation:
radius=41m
time = 8 sec
circumference=2πr
from formula
circumference=2×22/7×41
=257.71m
now
velocity=total distance( circumference)/total time
=257.71/8
= 32.21m/s
The velocity of race car makes one lap around a track with a radius of 41 meters in 8 seconds is 32.19 m/s
What is velocity ?Velocity is "rate of change of displacement with respect to time".
i.e. v= dx/dt
it is also defined as displacement over time. i.e. v=Displacement/Time.
Velocity shows how much distance can be covered in unit time. It's SI unit is m/s. It is vector quantity ( having both direction as well as momentum). where displacement is distance from mean position.
Given,
Radius of the track r= 41m
time taken by car to complete one lap T = 8s
velocity v = ?
we know that ω = 2π÷T
ω = 2×3.14 ÷ 8
ω = 0.785 rad/s
v=rω
v= 41×0.785
v= 32.185 ≅32.19 m/s
Hence velocity of the car is 32.19 m/s
To know more about velocity, click :
https://brainly.com/question/17127206
#SPJ3