To learn the mole concept and standard temperature.
What is standard temperature?
Therefore, 0 degrees Celsius, which translates to 32 degrees Fahrenheit or 273.15 degrees Kelvin, is considered the standard temperature. This is essentially the temperature at which pure water at sea level will freeze when exposed to air at standard pressure.
What is mole?
A mole is a crucial unit of measurement used by chemists. Similar to how having a dozen eggs means you have twelve eggs, having a mole of something indicates that you have 602,214,076,000,000,000,000,000 of that particular thing. Chemists must measure very small objects, such as atoms, molecules, or other particles, using moles.
Therefore there are 0.125 moles of water vapor present.
Learn more about standard temperature from the given link.
https://brainly.com/question/21021354
#SPJ4
how many different energies of light can be emitted from hydrogen when the electron jumps down to E2 from E3, E4, E5, E6
From the idea of the Bohr model, each of the electrons would emit a characteristic wavelength thus four wave lengths are emitted.
What is the emitted wavelength?We know from the Bohr model that when an electron jumps from a higher to a lower energy level, there is the emission of light of the appropriate wavelength.
Now we know that the energy that is evolved is what determines the wavelength of the light since the wavelength is inversely proportional to the energy that is evolved by the electronic transition.
Learn more about Bohr model:https://brainly.com/question/3964366
#SPJ1
without looking at the periodic table, write the complete electron configuration for the group 2 element in the fourth period.
The electronic configuration of the elements of the second group of the second period is 1s²2s²2 1s2 2p6 3s2 3p64s² or 2,8,8,2
To determine the external electronic configuration of an element, knowing the number is needed. Electrons and usage configuration rules (or electron energy levels).
The number of electrons in a neutral atom is the same as the number of protons.
The number of protons is the atomic number of the element. The
elements are arranged in the periodic table according to their atomic number.
The elements of group 2 are calcium and magnesium
The atomic number, number of protons, and number of electrons of group 2 elements are 40
Now we can distribute the electrons according to the structural rules:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s²
The outer shell has n = 2, so the outer electron configuration is 4s²
To learn more about electron configuration see:https://brainly.com/question/4792889?referrer=searchResults
#SJP4
When heated, NaOH decompoe according to the following equation. If all of the water i produced a water vapor, what i the expected ma lo for a 8.87 gram ample of NaOH? Report your anwer with three ignificant figure.
2 NaOH () → Na2O () H2O (g)
Answer:
I'm pretty sure its 2.73 g
Explanation:
Draw the structure of the major organic product isolated from the reaction of 3-hexyne with ozone followed by hydrolysis. .
The major organic product isolated from the reaction of 3-hexyne with ozone followed by hydrolysis is Propanoic acid by the ozonolysis
Ozonolysis is a method of cleaving alkenes by oxidation reaction or alkynes using ozone (O3), which is reactive allotrope of oxygen. The process allows for carbon-carbon double or triple bonds to be replaced by double bonds with oxygen.
This reaction is often used to identify the structure of unknown alkenes by breaking them down into smaller and more easily identifiable pieces. Ozonolysis also does occurs naturally and would break down repeated units which are used in rubber and other polymers.
The major organic product isolated from the reaction of 3-hexyne with ozone followed by hydrolysis is Propanoic acid.
To know more about ozonolysis
https://brainly.com/question/14356308
#SPJ4
1) binding buffer is 4m ammonium sulfate [(nh4)2so4] (fw 132.14). how would you make 300 ml of this solution?
To make 300 ml of Ammonium sulfate solution 158.5 grams of Ammonium sulfate should be taken.
Given,
Molarity of Ammonium sulfate = 4 M
Volume of solution = 300 mL = 0.3 L
Molar mass of Ammonium sulfate = 132.14 g/mol
Mass = Molarity × Molar mass × Volume of solution in Litres
Substituting the values we get,
Mass of the (NH₄)₂SO₄ = 4 M × 132.14 g/mol × 0.3 L
= 158.5 g
Hence, the mass of Ammonium sulfate required to make 300 ml of Ammonium sulfate solution is 158.5 grams.
Learn more about Ammonium sulfate solution from the link given below.
https://brainly.com/question/14836905
#SPJ4
Formula of bleaching powder?
The chemical formula of bleaching powder is Ca(ClO)₂.
Bleaching powder is a commercial product used for sanitation purposes. They are mainly used to disinfect drinking water and sanitize pools.
Chemically, this product is referred to as calcium hypochlorite. The formula of calcium hypochlorite is Ca(ClO)₂.
This compound is a white solid that has a strong smell of chlorine. This compound is produced by the reaction between chlorine (Cl) gas and slaked lime ((Ca(OH)₂).
This reaction equation is given as:
[tex]\mathrm{2Cl_2 + 2Ca(OH)_2} \rightarrow \mathrm{Ca(OCl)_2 + CaCl_2 + 2H_2O}[/tex]
Besides calcium hypochlorite, bleach also contains calcium hydroxide and calcium chloride. But calcium hypochlorite is more so the formula.
To know more about bleaching powder:
https://brainly.com/question/2543364
a gas sample is collected in a balloon. what happens to the density of the gas sample as the sample is heated?
The density of the gas will decrease as we heat the gas.
Density of a system is defined by mass per unit volume. Density basically describes how compact or concentrated something is. For example, suppose you have two boxes, one is large and one is small. However, they both weigh the same. But we see that the small box has a higher density than the large box. So, density also tells how concentrated or crowded something is.
Considering the above given case, when we take a gas sample in a balloon and then when we start to heat this sample, due to hear we can see that the gas molecules will try to move more far from each other and therefor the density of the system will decrease. This same concept is been used in hot air balloons too. When we heat the balloon the density of the gas will decrease and therefor the balloon floats in the air.
To know more about density
https://brainly.com/question/15164682
#SPJ4
which element has the longest name
Rutherfordium is the longest element name on the periodic table.
What is Rutherfordium?
Rutherfordium is a chemical element with the symbol Rf and atomic number 104, named after the British physicist Ernest Rutherford, who was born in New Zealand. It is not present in nature as a synthetic element and can only be created in a laboratory. It is radioactive; the half-life of the most stable known isotope, 267Rf, is 1.3 hours. It is a d-block element and the second of the fourth-row transition elements in the periodic table. It is a group 4 element in period 7. Experiments in chemistry have proven that rutherfordium is the heavier homolog to hafnium in group 4. Rutherfordium's chemical properties are only partially known.
Rutherfordium is the longest element name on the periodic table with 13 alphabets in its name.
To know more about Rutherfordium, click on the link
https://brainly.com/question/12300236
#SPJ4
which 2 layers of the earth are made out of rock
Which statement describes a change that occurs during a chemical reaction?
A. Atoms in the original substances are arranged in a different way to make new substances.
B. The atoms in a substance start to move faster until they are no longer touching each other.
C. Atoms in the original substances are changed into different atoms to make new substances.
D. The atoms in a substance change their properties so they can become a new substance.
The statement atoms in the original substances are arranged in a different way to make new substances correctly describes a change that occurs during a chemical reaction (Option A).
What is a chemical reaction?A chemical reaction is a process in which atoms arrange in different ways to form a new substance known as the product of the reaction while initial molecules are the reactants.
Therefore, with this data, we can see that a chemical reaction starts with certain molecules called reactants that have a arrangement while this process ends with molecules which are known as products of such reactions.
Learn more about chemical reactions here:
https://brainly.com/question/11231920
#SPJ1
using an acetic acid\sodium acetate buffer solution, what ratio of acid to conjugate base will you need to maintain the ph at 5.00? explain how you would make up such a solution.
Using an acetic acid\sodium acetate buffer solution, ratio of acid to conjugate base that will be needed to maintain the pH at 5.00 is 1:1.
How do you prepare a buffer solution with a pH of 5?Firstly, prepare 800 mL of distilled water in a suitable container.Then add 7.721 g of Sodium acetate to the solution.Next, add 352.5 mg of acetic acid to the solution.Now, adjust the formed solution to final desired pH using HCl or NaOH.In the end, add distilled water until the volume is 1 L.For having, effective buffer, the number of moles of the weak acid and its conjugate base must be large as compared to the number of moles of strong acid /base that is added. The best buffering occur when the ratio of [HA] to [A-] is 1:1.
To know more about buffer solution, refer
https://brainly.com/question/8676275
#SPJ4
what information is needed to convert a molar concentration to a molal concentration? the density of the solvent the density of the solution and the molar mass of the solute the volume of the solution the molar mass of the solute the solubility product of the solute
Therefore, for the conversion, we want the molarity of the solute as well as the density of the solution.
What are a solvent and a solute?The molecule is the thing that needs to dissolve, and the solution is the thing that needs to dissolve it. With a wide variety of solutes and solvents, solutions can be created. We are aware of a wide range of solutions.
What is an example of a solute?A solute is a material that dissolves in a solution. The solvent concentration present in fluid solutions is higher than the quantity of content. The two most common examples of solutions in daily life are salt and water.
To know more about Solute visit:
https://brainly.com/question/8851236
#SPJ4
What is the formula of the oxide that reacts with water to form hno3?
NO2 is the formula of the compound that reacts with water to form HNO3.
What is a chemical compound?
A chemical compound is a substance made up of several similar molecules (or molecular entities) that contain atoms from more than one chemical element and are bound together by chemical bonds. A molecule made up of only one element's atoms is hence not a compound. A chemical reaction can change a compound into a distinct substance, which may entail interactions with other chemicals. Bonds between atoms may be disrupted and/or new bonds generated during this process. Compounds are classified into four categories based on how the constituent atoms are linked together. Covalent bonds hold together molecules; ionic bonds hold together ions; metallic bonds hold together intermetallic compounds; and coordinate covalent bonds hold together coordination complexes.
NO2 is the formula of the compound that reacts with water to form HNO3.
Nitrous dioxide reacts with water to form nitric acid.
To know more about chemical compounds, click on the link
https://brainly.com/question/26487468
#SPJ4
what is the ph of a solution prepared by diluting 15.00 ml of 0.10 m hcl with enough water to produce a total volume of 100.00 ml?
The pH of a solution prepared by diluting 15.00 ml of 0.10 m HCl with enough water to produce a total volume of 100.00 ml will be 1.823
What is Molarity (M)?
The amount of a substance in a specific volume of solution is known as its molarity (M). It is also defined as the number of moles of a solute per liter of a solution. The molar concentration of a solution is another name for molarity.
It can be expressed as:
M = \frac{n}{v}
where, M = molar concentration
n = moles of solute
v = liters of solution
Given values: total volume = 100.00 ml, given volume = 15.00 ml
Solution: Molarity of acid after dilution = \frac{15 × 0.10}{100} = 0.015M
As one molecule of HCL release one H+ ion, Molarity of H+ ions will be 0.015 M
So, pH = - log (0.015) = 1.823
Learn more about the topic Molarity: https://brainly.com/question/8732513
#SPJ4
when it combines with the calcium carbonate, the acetic acid and the calcium carbonate come apart and reform in different ways to make new chemicals
when vinegar combines with the calcium carbonate, the acetic acid and the calcium carbonate come apart and reform in different ways to make new chemicals. One of them is the gas carbon dioxide.
The molar mass of CaCO3 is 100.0 g/mole so you need 727300g or 727.3 kg of limestone. Calcite or aragonite are the most common forms of limestone, a sedimentary rock mostly made of calcium carbonate (CaCO3). It could have a significant magnesium carbonate content (dolomite).
Lime, the base calcium oxide, is left behind after heating the limestone (calcium carbonate). The original limestone will be replaced with white lime that is more crumbly in texture. Water and calcium carbonate do not react.
To know more about limestone(calcium carbonate) visit : brainly.com/question/15148363
#SPJ4
What are the oxidation states of nitrogen in the compounds
NO, NO2, N2O3, N2O4 and N₂O5 respectively
Answer:
NO: +2
NO2: 3
N2O3: +3
N2O4: 4
N2O5: 5
Explanation:
Chemistry a chemistry teacher needs to mix an acid solution for an experiment. How much hydrochloric acid needs to be mixed with 1500 milliliters of water to make a solution that is 12% acid? if necessary, round to the nearest hundredth.
180 mL of hydrochloric acid needs to be mixed with 1500 milliliters of water to make a solution that is 12% acid.
What is a mixture?
A mixture is a substance made up of two or more chemical compounds with different properties that are not chemically connected. The physical combination of two or more substances results in solutions, suspensions, or colloids, which retain the separate identity of the individual constituents.
The amount of hydro chlorocalcite will be calculated as below:- 1500x12
Hence, 180 mL of hydrochloric acid needs to be mixed with 1500 milliliters of water to make a solution that is 12% acid.
To learn more about mixture from the given link.
https://brainly.com/question/24647756
#SPJ4
Which of the following were goals of Reconstruction? Check all of the boxes that apply. to reincorporate the South into the Unionto create a segregated society in the Southto establish equality under law for African Americansto assist African Americans in the transition from slavery to freedom
Answer: The goals of Reconstruction were to reincorporate the South into the Union, to establish equality under law for African Americans, and to assist African Americans in the transition from slavery to freedom.
Explanation: The Reconstruction was the period that followed the Civil War and during which the southern states that had adhered to the defeated Confederation were reintegrated into the Union. The devastating southern unionist invasion, attacks on civilian targets and the destruction of infrastructure, together with the economic policy that was implemented in the territory of the defeated after the war, caused the rise of a bitter rancor of many Southerners against the federal government. :D Hope I helped!
Which of the following notations is the correct noble gas configuration for Li?
O A. 1s²2s¹
OB. 1s22s
C. [He]2s¹
D. [Hel1 s22s¹
The right option is C, the correct noble gas notations for Li is [He] 2s¹.
We know that the atomic number of Li is 3 , so it will have 3 electrons in total, in filling electrons the electronic configuration is came as follows:
1s²2s¹ , but we asked for noble gas electronic configuration , so in this type of way of writing a noble gas configuration , we write by using the most nearer electronic configuration of a noble gas.
Let us see each option in each case,
In option A, it is the normal electronic configuration with no noble gas involved so it will be wrong.In option B, it is 1s²2s , which is 2 electrons only, so it will be wrongIn option C, it is using 2s² for He and the rest one electron for Li is written as 2s¹, so it will be the right answer.In option D, if we look at total number of electrons it will be 5 electrons , so this one will also be wrong.So the correct notation will be [He]2s¹ which is option C.
To know more about electronic configuration, please refer:
https://brainly.com/question/26084288
#SPJ1
Identify the phase of the copper product after each reaction in the copper cycle.
- The heating of Cu(OH)2 to form CuO
- The addition of NaOH to Cu(NO3)2 to form Cu(OH)2
- The addition of HCl to CuO to form CuCl2
- The addition of Al to CuCl2 to form Cu
the phase of the copper product after the reaction in the copper cycle is listed below
1.the heating of Cu(OH)2 to form CuO i.e
Cu(OH)2 (s) ⇒ CuO(s) + H2O (l) which means the product of copper is in a solid phase after the reaction.
2.the addition of NaOH to Cu(NO3)2 to form Cu(OH)2 i.e
Cu(NO3)2 (aq) + NaOH (aq) ⇒Cu(OH)2 (s) + 2NaNO3 (aq) which means the product of copper is in the solid phase after the reaction.
3. the addition of HCL to CuO to form CuCl2 i.e
2 CuO(s) + 2 HCl(aq) ⇒ 2 CuCl2(aq) + H2O (aq) which means the product of copper is in the aqueous/liquid phase after the reaction.
4. the addition of Al to CuCl2 to form Cu i.e
Al(s) + CuCl2(aq) ⇒ AlCl3(aq) + Cu(s) which means the product of copper is in a solid phase after the reaction.
learn more about the phase here;
https://brainly.com/question/25664350
#SPJ4
1. An unavoidable side reaction of alkyl halides with active metals which lowers the yield of Grignard reagents is called coupling. 2RX + Mg ------> R-R + MgX2 Although the mechanism of the coupling process is not well understood, it is known that the rate appears to depend on the square of the concentration of the halide. With this in mind, explain the reason for the sequence of addition of the ether solution employed at the beginning of the formation of the Grignard reagent in the experimental procedure above.
Competing reactions:
Desired - RX + Mg ⇒ RMgX rate ~ [RX]
Side - RX + RMgX ⇒ R-R + MgX2 rate ~ [RX]²
The desired reaction is favored by keeping the [RX] low so that it reacts with Mg and not RMgVia the Schlenk equilibrium Grignard reagents form varying amounts of organomagnesium compounds. Alkyl halides react with magnesium metal in anhydrous ether solvents to form organometallic reagents.
Grignard reagents are formed by the reaction of magnesium metal with alkyl or alkyl halides. They are wonderful nucleophiles that react with electrophiles such as carbonyl compounds and epoxides. Since Grignard reagents are strongly basic, they often undergo elimination reactions or do not react at all. The transition state of the alkyl halide substitution is less stable than the magnesium bromide complex. This is due to ligation formation between the solvent and magnesium atoms.
Learn more about The concentration here:-https://brainly.com/question/17206790
#SPJ4
magnesium oxide is composed of mg2 and o2- ions. energetically, why does mg2 o2- form and not mg and o-
Magnesium oxide is not composed of [tex]Mg^{+}[/tex] and [tex]O^{-}[/tex] ions because of the balanced chemical reaction.
A reaction is said to be balanced chemical reaction when the number of the atoms involved in the reactants side is equal to the number of atoms in the products side. For example in the chemical reaction, nitrogen (N2) reacts with hydrogen (H) to produce ammonia (NH3). The reactants are nitrogen and hydrogen, and the product is ammonia.
In the above given case when we write the balanced chemical reaction for the formation of Magnesium oxide it is as follows;
2Mg + [tex]O_{2}[/tex] ⇄ 2MgO
From this reaction we can clearly see that 2 molecules of magnesium is reacting with one molecule of oxygen. So each magnesium will loose one electron to bond with oxygen so since there are 2 magnesium atoms the total charge on the ion would be [tex]Mn^{2+}[/tex] and similarly in case of oxygen it would be [tex]O^{2-}[/tex]
To know more about balanced chemical reaction
https://brainly.com/question/13451900
#SPJ4
how does the concentration of an acidic liquid affect the volume of the acidic liquid needed to neutralize an alkaline solution?
Increasing the volume of the solution decreases the concentration of the hydrogen ions which subsequently increases the pH; hence, increasing volume will increase the pH.
What does concentration of acidic liquid affect volume needed for neutralization?Higher is the concentration of H plus ions, more acidic is the solution and lower the concentration of H plus ions, the less acidic is the solution. Basic strength of a solution depends on the concentration of OH minus ions.
When an acid and alkali react together, they produce salt and water. Acid + alkali → salt + water . As you know, water is neutral, so the acid alkali come together to neutralize each other to make pH 7.
To know more about acid base neutralization, refer
https://brainly.com/question/23008798
#SPJ4
Question 1-7
In any chemical reaction, the mass of the reactants equals the mass of the products. This result forms the basis of the Law of
Conservation of Mass. Which statement correctly explains why this is a law, rather than a theory?
The law of conservation of matter says that in chemical reaction and the statement is the total mass of the product must equal the total mass of the reactant
The law of conservation of mass states that the mass in an isolated system is neither created nor destroyed by chemical reaction or physical transformation and according to the law of conservation of mass and the mass of the product in a chemical reaction must equal to the reactant that means total mass of the product must equal the total mass of the reactant
Know more about chemical reaction
https://brainly.com/question/28711001
#SPJ1
Nutrients that are made by living things, are required only in small amounts, and that assist many chemical reactions are.
Vitamins are an important nutrient that the body needs to grow, develop, and carry out its functions normally. These nutrients are classified as macronutrients or micronutrients, which means the body needs them in small amounts. Generally, vitamins come from organic foods and fruits.
VitaminsNot all vitamins can be produced by the body, so humans still need vitamins as additional nutrition. Vitamins and minerals are nutrients that fall into the category of micronutrients. The body requires levels of vitamins and minerals in small amounts.
Some types of vitamins that are known are:
Vitamins A, C, D, E, K,
B vitamins, including thiamin (B1), riboflavin (B2), niacin (B3), pantothenic acid (B5), pyridoxal (B6), cobalamin (B12) , biotin, and folic acid/folate.
Learn more about vitamins here: https://brainly.com/question/9348916#SPJ4
What does a molecule structurally have to have in order to be able to form condensation polymers vs only being able to form a single ester?.
Monomers of condensation polymers must contain two functional groups so that each monomer can link with two other monomers
What are condensation polymers?
It is a form of a step-growth polymerization where smaller molecules or monomers react with each other to form larger structural units (usually polymers) while releasing by-products such as water or methanol molecule. The by-products are normally referred to as condensate.Monomers of condensation polymers must contain two functional groups so that each monomer can link with two other monomersMolecules should have one or two functional groups (like alcohol, amine, or carboxylic acid groups).Ex- Nylon and Polyester are some of the most common examplewhar ar esters?
Ester is a chemical compound which is made from either an organic acid or inorganic acid, during which a minimum of one –OH (hydroxyl) group is replaced by an –O–alkyl (alkoxy) group. Esters feature a carbon-to-oxygen double bond that is also singly bonded to second oxygen atom. The oxygen atom is further connected to aryl or an alkyl group. ex- ethyl ethanoateLearn more about condensation polymers at https://brainly.in/question/27753546
#SPJ4
Iconic bonds, fill in the blanks
In Ionic Bond metals lose valence electrons and become positively charged cations, non metals accepts valence electrons and become negatively charged anions .
Ionic bonds are formed in vicinity of atoms like for example NaCl , KCl , CaCl₂.
Ionic bonding is the complete transfer of valence electrons between atoms. Ionic compounds obey octet rule and become more stable and so they are typically neutral.
Ionic Bonds, metals lose valence electrons and become Positively charged cation .
Non metals accepts electrons and becomes negatively charged anion.
Read more about Ionic bonds:-
https://brainly.com/question/11527546
What mass of NaHCO, is decomposed by 256 kJ?
Answer: 91.5 kJ
Explanation:
solutions made of the same type of nanoparticle can be very different colors. choose which property determines the color of a nanoparticle solution.
The volume and shape of a nanoparticle determines how it interacts with light. This determines the color of a nanoparticle solution.
The coloration depends on the size and form of the nanoparticles, in addition to the distance between them. Right here, the red nano gold particles are approximately 20 nanometers across, whilst the orange nano gold particles are about 80 nanometers across.
Nanoparticles appear positive colors because they mirror (scatter) and take in unique wavelengths of visible light. Light which seems white is a more or less same combination of the wavelengths of light that can be perceived by means of the human eye, more or less four 100 to 750 nm.
As particle length increases, the wavelength of surface plasmon resonance associated absorption shifts to longer, redder wavelengths. red light is then absorbed, and blue light is pondered, yielding answers with a faded blue or red color.
Learn more about nanoparticle here:- https://brainly.com/question/9220200
#SPJ4
which is the strongest gravitational pull on earth,the sun or the moon why
Answer:
The sun
Explanation:
The sun is much heavier, it also pulls all eight planets towards its center and keeps them in their orbits.
Hope this helps
Answer:
The sun, because it is the largest one, and has the greatest gravitational pull. It keeps the earth in orbit around it.