At the completion of meiosis I, are the cells diploid or haploid? Explain.

Answers

Answer 1

Answer:

During meiosis I, the cell is diploid because the homologous chromosomes are still located within the same cell membrane. Only after the first cytokinesis, when the daughter cells of meiosis I are fully separated, are the cells considered haploid.


Related Questions

Which term can avoid traveling through a solid, a liquid, or a gas?

Answers

The term that can avoid traveling through a solid, a liquid, or a gas is "electromagnetic radiation" or "light."

Electromagnetic radiation: Electromagnetic radiation refers to the propagation of energy in the form of waves or particles through space. It includes various types of radiation, such as visible light, radio waves, microwaves, X-rays, and gamma rays.Traveling through solids: Solids have a tightly packed arrangement of atoms or molecules, which makes it difficult for electromagnetic radiation to pass through them. The particles in solids interact with the radiation and absorb or scatter it, preventing its transmission.Traveling through liquids: Liquids have a less rigid arrangement of particles compared to solids. While some electromagnetic radiation can pass through liquids, it may be partially absorbed or scattered due to interactions with the liquid molecules.Traveling through gases: Gases have widely spaced particles, allowing electromagnetic radiation to travel more freely compared to solids and liquids. However, certain gases can still interact with specific types of radiation, such as absorbing certain wavelengths or causing scattering.

Overall, electromagnetic radiation, or light, has the unique property of being able to propagate through a vacuum, which means it can travel through space where there is no matter present, as well as through various mediums, including gases, liquids, and solids.

For more such question on radiation

https://brainly.com/question/10328401

#SPJ8

1. A rock sample has a mass of 16 grams:
and a volume of 8 cubic centimeters.
When the rock is cut in half, what is
the volume and density of each piece?
(1) 8 cm3 and 0.5 g/cm3
(2) 8 cm² and 1.0 g/cm3
(3) 4 cm' and 2.0 g/cm3
(4) 4 cm3 and 4.0 g/cm3
1

Answers

Answer:

(3) 4 cm' and 2.0 g/cm3

Explanation:

Given:

volume= V= 8 cm³

mass= m= 16 g

The density is the mass per volume of a substance, so the density of the rock is:

density= d= 16 g/8 cm³= 2 g/cm³

When we cut the rock in half, we have a half volume and a half mass:

V= 8 cm³/2= 4 cm³

m= 16 g/2= 8 g

But the density is not altered because it is an intrisic property - it does not change with the amount of subtance. Thus, the density of a half rock is:

d = m/V= 8 g/4 cm³= 2 g/cm³

why is it important to know the beginning of the universe and the solar system?​

Answers

Answer:

In the process of exploring the birth of the earliest galaxies in the universe, to understand the planetary systems, explore planets that are capable of supporting life, and to learn whether life began elsewhere in the solar system have helped us advance and build our civilization.

when a plant sweats or emits water is called

Answers

Answer:

Overall, this uptake of water at the roots, transport of water through plant tissues, and release of vapor by leaves is known as transpiration

Explanation:

transpiration

Hope this helped you- have a good day bro cya)

what occurs if resources within a population are limited

Answers

Answer:

Explanation:

As resources are depleted, population growth rate slows and eventually stops,This is known as logistic growth.

Most people have observed it "rain" in the produce department of grocery stores, where water sprays green leafy
vegetables from a misting system. How does this practice help to keep vegetables fresh and crisp?
A)
-B)
Extra water makes plants shiny, increasing the likelihood that consumers
will purchase the plants.
Extra water creates a hypotonic solution around plant cells, which causes
water to diffuse into the cell creating turgor pressure.
Extra water creates a hypertonic solution around plant cells, which causes
water to diffuse out of the cell plasmolysing the cells.
Extra water creates an isotonic solution around plant cells, which causes
water to diffuse into and out of the plant cells making them flaccia,
D)

Answers

Answer:

B is the answer

Explanation:

I just took the test

2. Where is the element Carbon found in Photosynthesis?

Answers

Answer:

At land

Explanation:

Carbon is a raw material for photosynthesis, in the form of carbon dioxide. Green plants use it to make vital organic compounds. On the land, plants get the carbon they need as a gas from the air. In water, plants ranging from seaweeds to phytoplankton are supplied by dissolved carbon dioxide, CO2.

Describe four ways that protist get food?

Answers

Answer:

There are many plant-like protists, such as algae, that get their energy from sunlight through photosynthesis. Some of the fungus-like protists, such as the slime molds (Figure below), decompose decaying matter. The animal-like protists must "eat" or ingest food. Some animal-like protists use their "tails" to eat.

Explanation:

Describe the necessary steps from observing a specimen with 4X objective lens to observing the same specimen with 100X objective lens under the light microscope.

Answers

In order to observe a specimen under 4X objective lens, the following procedures must be observed:

Set up the microscope ensuring that the lens have been adequately cleaned and the light source is workingMount the object on a slide and place the slide on the stage of a clean microscope.Switch the revolving nose piece to ensure that the 4X objective is in positionSwitch on the light sourceBring the object into focus by using coarse and fine adjustment knobs.Ensure that the image of the object is centered on the stage.

In order to observe the same specimen under the 100X objective:

Switch the revolving nose piece to fix the 100x objective in place.Only use the fine adjustment knob to bring the image into focusIf the image will not resolve properly, a few drops of immersion oil may be applied to the slide to improve resolution.

More on microscopy can be found here: https://brainly.com/question/13137774

The himalayan mountains were formed baecause of a
a.convergent boundary
B.transform fault
c.hot spot
D.divergent boundary​

Answers

Explanation:

because of convergent fault (B).

hope this helps you.

is plantain a tuber crop​

Answers

Answer:

yes

Explanation:

Another fact is that the Banana plant is one of those perennial plants whose parts can be used as food, starting from its fruits-the bananas to its roots tubers. Banana tubers have been used as food mostly in states like Uganda, Indonesia, and also India.

What happens when the most limiting
factor in an ecosystem is removed?
A. population growth increases
B. neutral population growth
C. population growth ceases
D. nothing happens

Answers

Answer:

A. Population growth increases

Explanation:

When the growth is no longer being limited by a limiting factor, the population increases because the factor that limits the growth is gone.

Can you help me with this question?

Answers

Answer:

Explanation:

I DONT KNOW THE ANSWER

During meiosis, when do the sister chromatids separate?
a
Metaphase I

b
Metaphase II

c
Anaphase I

d
Anaphase II

Answers

Answer: During metaphase, each of the 46 chromosomes line up along the center of the cell at the metaphase plate. Anaphase: During anaphase, the centromere splits, allowing the sister chromatids to separate.

Explanation:

PLS ANSWER NOW THANK YOU :):) NEED HELP QUICKIn
1-2 sentences, describe the process of deposition and explain how it creates new landforms. :):)

Answers

Deposition is the geological process in which sediments, soil and rocks are added to a landform or landmass. Simply when layers of eroded material pile to create new landforms. For example, coastal deposition is how beaches are formed.

The geological process of deposition involves the addition of sediments, soil, and rocks to a landform or landmass. when eroded debris is piled up in layers to produce new landforms.

What is deposition?

A deposition is testimony made under oath and taken down in writing by an authorized officer of the court, typically in an out-of-court setting and before trial.

Depositions are usually taken from key witnesses, but can also involve the plaintiff or defendant, to give the involved parties a fair preview of all the evidence.

The individual making the deposition is known as the deponent and false statements can carry civil and criminal penalties.

Therefore, The geological process of deposition involves the addition of sediments, soil, and rocks to a landform or landmass. when eroded debris is piled up in layers to produce new landforms.

To learn more about deposition, refer to the link:

https://brainly.com/question/2507231

#SPJ2

Plants absorb carbon during which process?
A. Transpiration
B. Absorptive Synthesis
C. Respiration
D. Photosynthesis

Answers

Answer:

photosynthesis

Explanation:

this is because, plants use the carbon dioxide to prepare their own food through photosynthesis

A person jogging from the forest to the office covers the 6,800
meters in 2 hours. Their speed is not constant and they slow down
and speed up at various times. What is their average velocity?
Round the answer to the hundredths place if necessary.
a 1.9 m/s north
b. Impossible to calculate since the speed wasn't constant.
C. 0.9420/s north
d. 56.67 m/s north
e. 1.34 m/s north
f. 0.56 m/s north

Answers

Total displacement=6800mTime=2h=7200s

[tex]\\ \sf\longmapsto Avg\: Velocity=\dfrac{Total\: displacement}{Total\:time}[/tex]

[tex]\\ \sf\longmapsto Avg\: Velocity=\dfrac{6800}{7200}[/tex]

[tex]\\ \sf\longmapsto Avg\: Velocity=0.9420m/s[/tex]

Answer:

0.9420m/s north

Explanation:

Given,

Displacement (Total) = 6800 metres(m)

Time = 2 hours

We need to convert hours to seconds.

2 hours = 7200 seconds

We know,

[tex]\sf\longmapsto \: Average \: velocity = \frac{Total \: Displacement}{Total \: time} [/tex]

Let's start solving!

[tex]\sf\longmapsto \: Average \: velocity = \frac{6800 \: metres}{7200 \: seconds} [/tex]

[tex]\sf\longmapsto \: average \: velocity = 0.9420\: m/s[/tex]


In diffusion,

A) the molecules only move if ATP is present

B) the molecules move from an area of low concentration to high concentration

C) the molecules are unable to permeate the membrane

D) the molecules of a substance spread out evenly in the space they occupy

Answers

For instance, when a person spray his or her room, from where he or she spray will spread throughout the corners of the room


1) Why does the addition of dideoxynucleotides to the DNA sequencing reaction cause DNA synthesis to stop after the modified nucleotide is added?
A)Because once a modified nucleotide is incorporated into the DNA, there is no free 5'OH group to attach the next nucleotide being added.
B)Because once a modified nucleotide is incorporated into the DNA, there is no free 3'PO4-group to attach the next nucleotide being added.
C)Because once a modified nucleotide is incorporated into the DNA, there is no free 3'OH group to attach the next nucleotide being added.
D)Because once a modified nucleotide is incorporated into the DNA, there is no free 5'PO4-group to attach the next nucleotide being added.

Answers

In Sanger sequencing, once a modified nucleotide is incorporated into the DNA, there is no free 3'OH group to attach the next nucleotide being added. This phenomenon is useful to sequence a polynucleotide chain.

Dideoxynucleotides (ddNTPs) are nucleotide inhibitors of the DNA polymerase, it is for that reason that they are used in Sanger sequencing.

The ddNTPs are similar to natural deoxynucleotides used by cells during ADN replication; however, ddNTPs lack a hydroxyl (OH) group on the 3’ carbon of the deoxyribose.

In consequence, once a ddNTP is added, DNA synthesis cannot progress, thereby this phenomenon can be used to determine the order of nucleotides during the elongation of a polynucleotide DNA chain.

Learn more in:

https://brainly.com/question/14242676

convert 30 ft to cm .......................................

Answers

914.4 cm……………………………..

which is not a function of all cells ?

a. get rid of wastes

b. produces energy

c. burning nutrients ( sugar )

d. all are cell functions

Answers

Answer:

burning nutrients ( sugar)

Chloroplasts and mitochondria are both involved in energy conversion in cells and share many similarities. Differentiate between chloroplasts and mitochondria. Choose ALL of the characteristics that apply ONLY to chloroplasts.

A) contain DNA B) found in plants C) contain pigments D) used in photosynthesis E) used in aerobic respiration

Answers

Explanation:

contain pigments c and used in photosynthesis

The main difference between chloroplasts and mitochondria are contained pigments, used in photosynthesis. The correct options are C and D.

What are chloroplast and mitochondria?

The organelle found inside the cells of plants is known as a chloroplast. Additionally, there are particular algae that serve as the photosynthesis sites, where the sun's energy should be converted into chemical energy for the sake of growth. In addition to being employed in photosynthesis, it also contains pigments.

Membrane-bound cell organelles known as mitochondria (mitochondrion, singular) produce the majority of the chemical energy required to fuel cellular metabolic operations.

Therefore, the correct options are C) containing pigments and D) used in photosynthesis.

To learn more about chloroplast and mitochondria, refer to the link:

https://brainly.com/question/15033628

#SPJ2

solve the crossword usings hints below
.........................​

Answers

Answer:

1. Snail

2. Leukemia

3. Haemoglobin

4. Vertebrate

5. Fracture

6. Femur

7. Cockroach

9. Respiration


Which of the following is NOT a function of the skeletal system?
a. contraction
b. blood cell production
c. support
d. protection

Answers

Answer:

blood cell production

Explanation:

ur welcome!

b

Explanation:

it is part of the vein system

why is the carbon cycle important to marine science. 4-5 sentences

Answers

The ocean plays a critical role in carbon storage, as it holds about 50 times more carbon than the atmosphere. Two-way carbon exchange can occur quickly between the ocean's surface waters and the atmosphere, but carbon may be stored for centuries at the deepest ocean depths

How does biodiversity affect humans?​

Answers

Biodiversity affects humans by: underpins the health and has a direct impact on all of our lives. To summarize reduced biodiversity means millions of people face a future where food supplies are more vulnerable to pests and disease, and where fresh water is in irregular or short supply. For humans that is worrying.

What is the probability that a heterozygous black guinea pig crossed with a white one will produce a white offspring?

Answers

It’s 50/50 I’m pretty sure

What is the expected ratio of coat colors in the offspring of two palomino horses

Answers

Answer:

25% DD dominant, 25% dd, 50% Dd

What statement describes a controlled experiment

Answers

Answer:

What is a controlled experiment? This is when a hypothesis is scientifically tested. In a controlled experiment, an independent variable (the cause) is systematically manipulated and the dependent variable (the effect) is measured; any extraneous variables are controlled.

Explanation:

Hope it helps

Hello,

Can someone re-word this well for 50 points?

"The lab allowed me to model and observe stream and river processes. Using a virtual model, I compared low and high velocity streams or rivers, low and high gradient streams or rivers, and low and high volume streams or rivers. I found that higher velocity streams or rivers can cause more erosion, as do higher gradient and higher volume streams or rivers. Not only did these factors move more small sediment, they also moved larger pieces of sediment."

Answers

Answer:

Explanation:

This lab here allowed me to model and notice  the stream and river processes. I found that higher celerity streams or rivers can cause more abrasion, as do higher gradient and higher volume streams or rivers. Not only did these factors move more small sediment, they also moved bigger pieces of the sediment rock.

Other Questions
find tge equation of the line why don't electrons, which are attracted to the protons in the nucleus, simply fall into the nucleus? hELPPP pls quick thanks Find the missing side of each triangle. Round your answers to the nearest tenth if necessary.Please show ur work What happens to the size of an Object when it is heated ? Kay is working with Charity to help Charity identify the type of career she wants and what steps to take to realize her goals. Kay and Charity are: A. in the development phase of career planning. B. working through an organizational assessment. C. conducting a self assessment of Charity. D. in the direction phase of career planning. What is a qualitative observation? what is the difference between de jure and de facto segregation Engineering An overpass intersects twolanes of a highway. What must the value of xbe to ensure the two lanes are parallel? Find the slope of the line that passes through (19, -9) and (70, 68).Simplify your answer and write it as a proper fraction, improper fraction, or integer. Quick please PARKING LOT PANELBOARD FEEDER DEMAND LOADING:A parking lot panelboard is supplying 62 parking stalls on 15 amp circuits which arerestricted or controlled. Determine the total calculated demand load in kW for theFEEDER conductors supplying the panelboard.The calculated demand load is ____ kW find the major product A farmer has 15 boxes of eggs.There are 6 eggs in each box.Write, as a ratio, the number of eggs in three boxes to the total number of eggs.Give your answer in its simplest form. There are 32 students in the 6th grade at Garden Valley Middle School. Eight of them have freckles. What is the ratio of 6th graders with freckles to the total number of 6th graders? A. 1:4 B. 4:1 C. 1:3 D. 3:1 an association claim with variables can be examined with a correlation, and the results of the test have two primary components. the first component tells you whether the association is positive or negative; it is referred to as . the second component tells you how closely the variables are associated; it is referred to as . Write an equation representing the pound of clay, c, that jamal from the example needs to make b bowls. explain how to find the amount of clay jamal needs to make 8 bowls. Two or more words combie to form words A square has a perimeter of 20 ft. What is the length of each side? future changes in automobile technology are likely to include 9/2 + (-8)Explain the steps