Answer:
a. V_y = 50m/s and V_x = 86.6m/s
b. d_x = 173.2m
c. d_y = 80.38m
Explanation:
V_x = 100m/s*cos(30°)
V_x = 86.6m/s
V_y = 100m/s*sin(30°)
V_y = 50m/s
D_x = v_x*t
d_x = 86.6m/s*2s
d_x = 173.2m
v_f = 50m/s+(-9.81m/s²)*2s
v_f = 30.38m/s
d_y = .5*(30.38m/s+50m/s)*2s
d_y = 80.38m
goodie morning
—————————
what is nitric acid?
Answer:
Nitric acid, also known as aqua fortis and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water.
Explanation:
Good morning...
Nitric acid production is mainly driven by fertilizer industry. Nitric acid is used in the production of ammonium nitrate and calcium ammonium nitrate which find applications as fertilizers.
Atoms are attracted to each other because____
A) electrons are attracted to protons because they have opposite charges
B) magnets pull them together
C) the protons are attracted to each other because they have the same charge
D) they have some energy
Answer:
A
Explanation:
Opposite attract. Since electrons are negative they will be attracted to the protons because they a positive
Date:
Page:
# Excercise.
7.
A very short answer questions.
what is acceleration due to gravity? what is
value of 'g’ on equatorial region and
polar region of the earth?
the
Answer:
See the answer below
Explanation:
Acceleration due to gravity (g) is the accelerational force experienced by a body as a result of the influence of the earth's gravitational force. It is a vector quantity, that is, it has both magnitude and direction.
The acceleration due to gravity is inversely proportional to the square of the radius of the earth. Hence, g at the equatorial region is slightly lesser (9.780 m/s2) than that of the polar regions (9.832 m/s2) of the earth because the earth bulges at the equator leading to a higher radius than at the poles.
A container of gas is at a pressure of 3.7 x 10^5 Pa. How much work is done by the gas if its volume expands by 1.6 m^3 ?
Answer:
592000 J
Explanation:
We'll begin by converting 3.7×10⁵ Pa to Kg/ms². This can be obtained as follow:
1 Pa = 1 Kg/ms²
Therefore,
3.7×10⁵ Pa = 3.7×10⁵ Kg/ms²
Next, we shall determine the workdone.
Workdone is given by the following equation:
Workdone (Wd) = pressure (P) × change in volume (ΔV)
Wd = PΔV
With the above formula, the work done can be obtained as follow:
Pressure (P) = 3.7×10⁵ Kg/ms²
Change in volume (ΔV) = 1.6 m³
Workdone (Wd) =?
Wd = PΔV
Wd = 3.7×10⁵ × 1.6
Wd = 592000 Kgm²/s²
Finally, we shall convert 592000 Kgm²/s² to Joule (J). This can be obtained as follow:
1 Kgm²/s² = 1 J
Therefore,
592000 Kgm²/s² = 592000 J
Therefore, the Workdone is 592000 J.
Seeing these new artifically designed creatures at home, as the result of breeding, he coined the term ____ ______ to explain the variation of species around the islands and (by extension of his theory) also around the world.
Answer: Artificial Selection
Explanation: Artificial Selection is described as the identification of desirable traits in both plants and animals, then enhance them, so that those traits can be manifested in future generations.
This is the scope behind cross breeding of plants and animals and this have largely been used in agricultural sector to improve input (such as disease-resistant seeds) and other biotechnological settings.
Darwin's described artificial selection as the human form of natural selection.
The rate at which electric
charges flow through a
circuit
Answer:
The answer is Current.
Which state has the most fixed shape?
O A. Gas
O B. Solid
O C. Liquid
O D. Plasma
Answer: Liquid
“A substance will take on the shape of an open container if it is a Liquid. Explanation: The major state of matter are solid, liquid and gas. Liquid usually have a definite volume.”
Answer:
solid
Explanation:
Solids are fixed and solid.
How can scientific phenomena be used in design?
How to find the total displacement of an object ?
Answer:
it can be calculated by measuring the final distance away from a point, and then subtracting the initial distance
What is moment? Write down the law of moment.A long spanner is used to unscrew the tight nut.Why?
Answer:
Moment is the product of force and its perpendicular distance from a point along its line of action.
The net moments on clockwise and anticlockwise is zero at a point.
The net force applied on a spanner handle is equal to the moment of the rotation
A force of 20 N acted on a 5 kg object, moving it a distance of 4 m. How much work was done on the object?
Answer:
400J
Explanation:
The work done by the force on the object is 80 J.
What is work ?The work is defined by the product of force and displacement. Its unit of measurement is joule. And the formula is,
Work = Force ×Displacement
Or mathematically it is W = F.d
In the question given data ,[tex]F = 20N , d = 4m\\[/tex]
putting in the above formula ,W = 20 × 4
W = 80 J
Hence the work done by the force is 80J.
Find out more information about work here:
https://brainly.com/question/11367798
#SPJ2
Which force determines if an object is going to move or stay at rest?
a. Friction Force
b. Normal Force
c. Applied Force
d. Net Force
Answer:
a
Explanation:
because it's need someone moving it so it can move somewhere else
Si un movil parte del reposo logrando una aceleracion de 5 metros por segundo al cuadrado durante 8 segundos calcular la velocidad final
Answer:
Velocidad final, V = 40 m/s
Explanation:
Dados los siguientes datos;
Aceleración = 5 m/s²
Velocidad inicial = 0 m/s (ya que comienza desde el reposo)
Tiempo = 8 segundos
Para encontrar la velocidad final, usaríamos la primera ecuación de movimiento;
[tex] V = U + at[/tex]
Dónde;
V es la velocidad final. U es la velocidad inicial. a es la aceleración. t es el tiempo medido en segundos.Sustituyendo en la fórmula, tenemos;
[tex] V = 0 + 5*8 [/tex]
[tex] V = 0 + 40 [/tex]
[tex] V = 40 [/tex]
Velocidad final, V = 40 m/s
the volume of vessel is 6 litres. convert it into ml
A function is defined by f(x)= 6x+1.5. What is f(2.5)?
Answer:
f(2.5) = 16.5
General Formulas and Concepts:
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightAlgebra I
FunctionsFunction NotationExplanation:
Step 1: Define
Identify
[Function] f(x) = 6x + 1.5
[Given] f(2.5) is x = 2.5 for function f(x)
Step 2: Evaluate
Substitute in x [Function f(x)]: f(2.5) = 6(2.5) + 1.5Multiply: f(2.5) = 15 + 1.5Add: f(2.5) = 16.5hmkjiji8gjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
At what point will the electric field of a charged object be strongest?
A where the electric field lines are perpendicular to the equipotential line
B. where the electric field lines are farthest apart
C. where the electric field lines are closest together
D. where the electric field lines are parallel to the equipotential line
Answer:
The answer is C because they have to be close to be able to interact
Answer:
C. where the electric field lines are closest together
Explanation:
Which statements describe acceleration? Check all that apply.
Negative acceleration occurs when an object slows down in the positive direction.
Negative acceleration occurs when an object slows down in the negative direction
Negative acceleration occurs when an object speeds up in the negative direction.
O Positive acceleration occurs when an object speeds up in the positive direction.
Positive acceleration occurs when an object speeds up in the negative direction.
Positive acceleration occurs when an object slows down in the negative direction.
Answer:
Negative acceleration occurs when an object slows down in the positive direction.
Negative acceleration occurs when an object speeds up in the negative direction.
Positive acceleration occurs when an object speeds up in the positive direction.
Positive acceleration occurs when an object slows down in the negative direction.
Explanation:
Basically same sign is speeding up and different sign is slowing down
Solve the rational equation:
5x/x+2 = 3x/x+1
Answer:
x = 1/2
Explanation:
5x/x + 2 = 3x/x + 1
do cross multiplication
(x + 2) * 3x = (x + 1) * 5x
3x^2 + 6x = 5x^2 + 5x
6x - 5x = 5x^2 - 3x^2
x = 2x^2
x/x^2 = 2
1/x = 2
1 = 2x
1/2 = x
4. A motorist travels 406 km during a 9.0 hr period. What was the average speed in km/hr and m/s?
Answer:
45.11 kmph and 12.530 m/s
Explanation:
Average speed = Total distance travelled / Total time taken
406/9 gives the answer in kilometers
And we convert it to m/s by multiplying it with 1000/3600
An organism that is only one cell big and has a nucleus is most likely a member of which kingdom?
Answer:
Protista
Explanation:
Taxonomy can be defined as the process of naming, classification and description of living organisms such as plants and animals. Thus, the biological classification of living organisms based on similarities or characteristics such as eyes, number of legs, etc., is generally referred to as taxonomy.
Basically, taxonomy helps scientist to have a good understanding and knowledge when studying various organisms.
Furthermore, the eight (8) biological classification (taxonomy) used for grouping and organizing organisms are; kingdom, domain, phylum, family, order, class, species and genus.
An organism that has only one cell, big and has a nucleus is most likely a member of Protista. Thus, a Protista such as euglena, paramecium, amoeba, etc., have a nucleus and are unicellular.
A unicellular organism refers to a living organism that possess a single-cell while a multicellular organism has many (multiple) cells.
Alex has a 100 cm ruler pivoted at the centre. She ties a balloon filled with carbon doxide 16 cm from the pivot The total weight of the balloon and carbon dioxide is 0.06 N The ruler becomes unbalanced. Calculate the turning moment the balloon produces about the pivot on the ruler Give the unit
The turning moment the balloon produces about the pivot on the ruler is 0.0096 N-m.
What is torque?
The force that can cause an object to rotate along an axis is measured as torque. In linear kinematics, force is what drives an object's acceleration. Similar to this, an angular acceleration is brought on by torque. As a result, torque can be thought of as the rotational counterpart to force. The axis of rotation is a straight line about which an item rotates.
Weight of the balloon and carbon di oxide: w = 0.06 N.
Distance from pivot: d = 16 cm = 0.16 m.
The length of the ruler pivoted at the center = 100 cm = 1 m.
Hence, the turning moment the balloon produces about the pivot on the ruler = wd = 0.06 × 0.16 N-m = 0.0096 N-m.
So, the turning moment the balloon is 0.0096 N-m.
Learn more about torque here:
https://brainly.com/question/6855614
#SPJ2
A ball is rolling along a straight and level path. The ball is traveling at a constant speed of 2.0 m/s. The mass of the ball is 3.0 kg. What is the kinetic energy of the ball?
A. 6.0 J
B. 9.0 J
C. 12.0 J
D. 3.0 J
Que capacidade física consiste em deslocar o corpo no espaço o mais rápido possível, mudando o centro de gravidade de posição, sem perder o equilíbrio e a coordenação dos movimentos?
Answer:ur mom
Explanation:because
CAN SOMEONE PLS HELP ME ILL GIVE YOU BRAINLIEST
A 7000 N braking force is used to slow a car down. The car was traveling at 25 m/s before the
brakes were applied and was traveling at 5 m/s after 6 seconds. What is the mass of the car?
magnification produced by a rear view mirror fitted in vehicle is less than one or more than one or equal to one
How couple is produced in bicycle? What causes the wheels of bicycle to rotate?
Answer:
A Couple in a bicycle is usually generated by the gravitational force and the corresponding reaction forces of the floor. A couple is a force which encourages or prevents a body turning in motion.
The wheels help in the movement and motion of the bicycle from point A to B. The chain which connects different parts help in the rotation of the bicycle wheels through the movement of the pedals by the legs
need help with this!
just scienceeeeeee
Answer:
7) λ = 0.5 m, 8) f = 4.8 10¹⁴ Hz
Explanation:
The speed of an electromagnetic wave is
c = λ f
where c is the speed of light in vacuum c = 3 10⁸ m / s
7) indicate the frequency f = 6.0 10⁸ Hz
we do not know the wavelength
λ = c / f
we calculate
λ = 3 10⁸ / 6.0 10⁸
λ = 0.5 m
8) indicate the wavelength λ = 6.25 10-7 m
we do not know the frequency
f = c / λ
we calculate
f = 3 10⁸ / 6.25 10⁻⁷
f = 0.48 10¹⁵ Hz
f = 4.8 10¹⁴ Hz
Find the answer for number 25.
We are given:
Mass of load = 140 kg
Acceleration = 0.4 m/s² downward (from Q24)
24. Finding the tension in the cable:
Ma = Mg - T
where 'a' is the acceleration of the load and T is the tension in the cable
replacing the variables, we get:
(140)(0.4) = (140)(9.8) - T
T = (140)(9.8) - (140)(0.4)
T = 1372 - 56
T = 1316N
25. Finding the distance covered when the load accelerates for 20 s:
in this case, the load will start from rest
so, initial velocity = 0 m/s
acceleration = 0.4 m/s²
from the second equation of motion:
s = ut + (1/2)at²
where s is the distance covered, u is the initial velocity and t is the time taken
s = (0)(20) + (1/2)(0.4)(20)²
s = 0 + 0.2*(400)
s = 80 m
here we didn't take the acceleration due to gravity of the mass into consideration because it is connected to the crane, which would act against any forces and since we are given that the total acceleration is 0.4 m/s², we will just assume that it's the final acceleration of the mass
Multiple Choice Identify the letter of the choice that best completes the statement or answers the question. The best type of graph to illustrate the change in air temperature over a period of time would be a _________ graph. a. circle b. line c. bar d. all of these Please select the best answer from the choices provided A B C D
Answer:
B line graph
Explanation:
sorry if I am wrong
Answer:
b
Explanation: