Therefore, the number of bacteria after 200 minutes can be found by multiplying the initial number of bacteria (450) by the tripling factor (3) raised to the power of 2 (for the full cycles) and multiplying by the remaining fraction of the tripling factor for the partial cycle.
Since the bacteria triples every 3 hours, we can calculate the number of tripling cycles that have occurred in 200 minutes. Since 3 hours is equivalent to 180 minutes, there are 2 full cycles in 200 minutes. To calculate the remaining fraction of the tripling cycle, we divide the remaining time (20 minutes) by the length of a single cycle (180 minutes). The fraction is 20/180, which simplifies to 1/9.
Now, we can calculate the number of bacteria after 200 minutes. We start with the initial number of bacteria, which is 450, and multiply it by the tripling factor (3) raised to the power of the number of full cycles (2). This accounts for the full cycles. Then, we multiply this result by the remaining fraction of the tripling factor (1/9) to account for the partial cycle.
Therefore, the number of bacteria after 200 minutes can be calculated as follows:
Number of bacteria = 450 * (3^2) * (1/9) = 450 * 9 * (1/9) = 450
Hence, after 200 minutes, there will still be 450 bacteria.
Learn more about factor here:
https://brainly.com/question/14549998
#SPJ11
Using π = 3.14, what is the circumference of a circle with a diameter of 28 units?
Round your answer to the nearest hundredth.
Describe the transformation from the graph (Desmos!)
Answer: (I am really not sure the answer if it is wrong I am so sorry)
h=3, k=2
Horizontal: up, 2 units
Vertical: up, 3 units
What is the measure of angle x?
Answer:
47 degrees
Step-by-step explanation:
A triangle’s degrees add up to 180, so we can use that theorem
102 + 31 + x = 180
133 + x = 180
x = 47 degrees
find the value of X, round to the nearest 10th
Answer:
4.0731 cm
Step-by-step explanation:
Use pythagorean Theorem which is a^2 + b^2 = c^2 where a and b are the sides of the triangle and c is the hypotenuse, in other words the longest side.
Since x is in line with the center of the circle and is perpendicular with line that measures 15.6 cm we know that one side of the triangle is half of 15.6 or 7.8.
So then we input our known values into the formula and solve for the missing one. The formula looks like this
7.8^2 + b^2 = 8.8^2
solve for b and you get about 4.07431
your very welcome
Answer:
X= 4.1
Step-by-step explanation:
Other answer wasn't rounded.
X= 4.1 cm
The question is down below, please help me!! I will rate the question 5 stars and give a heart if answered
Answer:
it's 3.12 it's super easy it is 3.12 trust me you won't get it wrong
Can someone help me with this. Will Mark brainliest.
Answer:
(7.5, 3)
Step-by-step explanation:
(5,5) and (10, 1)
Midpoint:
[tex](\frac{x1 + x2}{2} ,\frac{y1+y2}{2} )\\\\(\frac{5 + 10}{2} ,\frac{5+1}{2} )\\\\(\frac{15}{2} ,\frac{6}{2} )\\\\(7.5,3)[/tex]
Answer:
it should be (7.5,11.25)
Step-by-step explanation:
i need to know the answer and the work shown how i got it pleasee help!!!
What is the positive solution to 2x^2=72?
2x^2 = 72
Divide both sides by 2:
X^2 = 36
Take the square root of both sides
X = 6
How many ounces are in 2 1/2 gallons?
The next question(s) are based on this scenario: A researcher randomly assigned boys and girls to each of two groups. One group watched a violent television program while the other group watched a nonviolent program. The children were then observed during a period of free play, and the incidence of aggressive behavior was recorded for each group. What is the independent variable in this study
Answer:
The type of television program viewed
Step-by-step explanation:
The Independent variable may be explained as those variables which determines the outcome or output of an experiment or analysis. The output is the dependent variable. Hence, the independent variable determines the predicted variable.
In the scenario described above, the type of television program viewed, either violent or nonviolent is the independent or predictor variable. This determines the level or incidence of aggressive behavior exhibited by the subject, this incidence of aggressive behavior is the dependent or predicted variable.
Ana wito www.domen on the upcoming moral doction. To set as members to at the part om ww wonder proces can be di guero y me en om same from the CHO Which of the low would produce a umple random mu? Bely DA Vole on which four member the passion, and the four D. Nunber Board Troms and the random funber gerare to prove titerunt runterscoresponding to the names Cena prece of paper than in hand tour D. there in order and take the fourth The list of its blow is from aroubergenroning technology the best mandato from your with the tourneren and 25, what our members would be rected from the numberedel? 21.15.23.23.20.5. 25.10.22.9.25. 11.4.23 O A Na Waam Och On Thompson Noon, Cooper Zen OG Thompson Man loche Dan Cooper Zana DE Thompson Wine Tale
The members chosen to participate in the upcoming moral doction can be determined through a random selection process.
One way to generate a random number is to use a random number generator (RNG). In this case, the list of members includes names like Cena, Prece, Thompson, Noon, Cooper, Zen, OG, Man, Loche, Dan, Zana, DE, Wine, and Tale. To select four members randomly, you can use the RNG to generate four random numbers within the range of the list indexes. The corresponding names at those indexes would be the chosen members.
In order to select four random members from the list of names including Cena, Prece, Thompson, Noon, Cooper, Zen, OG, Man, Loche, Dan, Zana, DE, Wine, and Tale, you can use an RNG. The RNG generates random numbers within a specified range. In this case, the range would be the number of elements in the list, which is 14.
Let's assume the RNG generates the following numbers: 21, 15, 23, and 23. Using these numbers as indexes, you would select the corresponding names in the list: Thompson, Noon, Dan, and Dan. Therefore, the four randomly selected members would be Thompson, Noon, Dan, and Dan.
Learn more about random selection click here: brainly.com/question/31561161
#SPJ11
Which graph represents the function f(x) = 1/3 |x|?
Answer:
b
Step-by-step explanation:
state a,b, and the y-intercept then graoh the function on a graphing calculator ONLY PROBLEMS 1, 3, 5. WILL MARK BRAINLEST PLEASE HELP MATH ISNT MY STRONG SUBJECT
Step-by-step explanation:
y-intercept=when x is 0
So just set 0 for x in all equations
1. 2(3)^x2(3^0)
2(1)=2
(0,2)
3. -5(.5)^x-5(.5)^0
-5(1)
-5=y
(0,-5)
6(3)^x6(3)^0
6(1)=6
(0,6)
Hope that helps :)
This is a 3rd grade math question. I don't know how to explain it to a 9yr old
this is 3rd grade math? jesus..
Answer:
that poor 3rd grader O.O that is hard
Step-by-step explanation:
online
........help me plz plzzzzzzzz
Answer:
a = 42 and B = 50
Step-by-step explanation:
6 x 5 = 30
6 x 7 = 42
B
7 x 10
5 x 10
Answer:
Monkey A ate 42 vegtables and monkey B ate 50 fruits
Step-by-step explanation:
There are 5 blocks of fruits and 7 of vegtables.
Monkey A ate 30 fruits; 30/5 = 6. So that means each block is worth 6 peices of food. And 6x7 = 42.
Monkey B ate 70 vegtables; 70/7 = 10. So that means each block is worth 10 peices of food. And 10x5 = 50
-----------------------------------------------------------------------------------------------------------------
Missing values
Vegtables: 42
Fruit: 50
399.2 divided by 1\10 =??
Answer:
3,992
Step-by-step explanation:
1/10 = 0.1
399.2/0.1 = 3,992
Answer:
3990
Step-by-step explanation:
Place the decimal to a fraction:
399.2 = 399 2/10
Simplify = 399 1/5
Put in improper fraction = 1995/5
Simplify more = 399/1 or 399
So:
399 divided by 1/10 = 3990
HELPP ILL PUT YOU THE BRAINIEST The set of all values that a function can take as inputs is called the
Use the GCF and distributive property to write an equivalent expression.
Answer:
2
6
9
Step-by-step explanation:
Because if you pay attention to our teacher he told us how to respond it!
a part 1) An econometrician suspects that the residuals of her model might be autocorrelated. Explain the steps involved in testing this theory using the Durbin–Watson (DW) test.
a part 2) The econometrician follows your guidance in part (a) and calculates a value for the Durbin–Watson statistic of 0.95. The regression has sixty quarterly observations and three explanatory variables (plus a constant term). Perform the test. What is your conclusion?
The Durbin-Watson test is an important tool for determining autocorrelation.
The steps involved in testing autocorrelation theory using the Durbin-Watson (DW) test are as follows:
a. Develop the hypothesis to be tested.
In this case, the hypothesis is that the model residuals are autocorrelated
b. Estimate the original model, and obtain the residuals .
c. The residuals should be arranged in order of time.
d. The formula for Durbin-Watson is applied to the residuals.
e. The Durbin-Watson statistic value is interpreted in the context of the hypothesis to determine whether to accept or reject the null hypothesis.
If the Durbin-Watson statistic is greater than two but less than or equal to four, the residuals are said to be uncorrelated.
On the other hand, if the Durbin-Watson statistic is less than two, positive autocorrelation exists.
Similarly, if the Durbin-Watson statistic is greater than four, negative autocorrelation exists.
Now, considering the values given in part 2 of the question, we have;
60 quarterly observations3 explanatory variables (plus a constant term)Durbin-Watson statistic of 0.95The calculation of DW statistic can be done as follows:
DW = 2.0 - 2(r)where, r is the sample autocorrelation coefficient of the residuals. To test the hypothesis, we need to perform the following actions;
Calculate the critical value of DW at 1% level of significance and for the given degrees of freedom.
Decide the conclusion by comparing the calculated value of DW with the critical value.
If the calculated value is less than the lower critical value, we reject the null hypothesis; otherwise, we accept the null hypothesis. Therefore, The null hypothesis H0:
No first-order autocorrelation versus alternative hypothesis Ha:
first-order autocorrelation exists can be tested with a DW test. The test statistic (DW) is 0.95, which is greater than the lower critical value (dL) of 1.28.
Therefore, the null hypothesis H0 is not rejected, and it can be concluded that there is no first-order autocorrelation in the regression model residuals.
To know more about autocorrelation, visit:
https://brainly.com/question/30693602
#SPJ11
Compare each set of rational numbers.
Consider the second-order differential equation d^2/dy^2+49y = 4.5 sin(8t). Find the Particular Integral
The Particular Integral is,$$y_p = -\frac{512}{6301}sin(8t)+\frac{343}{6301}cos(8t)$$
The given differential equation is:$$\frac{d^2}{dy^2}+49y = 4.5sin(8t)$$For finding the Particular Integral, the initial steps are: Finding the characteristic equation of the homogeneous equation.$$m^2+49=0$$$$\Rightarrow m = 7i, -7i$$Let us assume the Particular Integral of the form,$$y_p = A sin(8t)+Bcos(8t)$$ Differentiating the Particular Integral to get,$$\frac{d}{dt}y_p = 8Acos(8t)-8Bsin(8t)$$$$\frac{d^2}{dy^2}y_p = -64Asin(8t)-64Bcos(8t)$$ Substituting these in the differential equation, we get$$(-64Asin(8t)-64Bcos(8t))+49(Asin(8t)+Bcos(8t)) = 4.5sin(8t)$$S implifying the equation, we get,$$(49A-64B)cos(8t)+(49B+64A)sin(8t)=4.5sin(8t)$$Comparing the coefficients, we get$$49A-64B=0$$$$49B+64A=4.5$$Solving these equations, we get,$$A = -\frac{512}{6301}$$$$B = \frac{343}{6301}$$
Know more about Integral here:
https://brainly.com/question/31059545
#SPJ11
a storage container for oil is in the shape of a cylinder with a diameter of 10 ft and a height of 17 ft. Which measurement is closest to the volume of the storage container in cubic feet?
Answer:
1335.18
Step-by-step explanation:
V=π(d/2)2h
Answer:
1335.18
Step-by-step explanation:
V=π(d/2)2h
use cylindrical coordinates. find the mass and center of mass of the s solid bounded by the paraboloid z = 12x2 12y2 and the plane z = a (a > 0) if s has constant density k.
The center of mass can be determined by dividing the moment of the solid with respect to each coordinate axis by the total mass.
In cylindrical coordinates, the paraboloid and the plane can be represented as z = 12r^2 and z = a, respectively. To find the mass, we integrate the density function k over the region of the solid, which is bounded by z = 12r^2, z = a, and the region in the xy-plane where the paraboloid intersects the plane z = a. The integral becomes M = k * ∭ρ dV, where ρ is the density function.
To find the center of mass, we calculate the moments of the solid with respect to each coordinate axis. The x-coordinate of the center of mass can be obtained by dividing the moment about the x-axis by the total mass. Similarly, the y-coordinate and z-coordinate of the center of mass can be calculated by dividing the moments about the y-axis and z-axis, respectively, by the total mass.
By evaluating the triple integral and performing the necessary calculations, we can determine the mass and center of mass of the given solid in cylindrical coordinates.
Learn more about coordinates here:
https://brainly.com/question/22261383
#SPJ11
Current Attempt in Progress The following table lists the monthly incomes (in hundreds of dollars) and the monthly rents paid (in hundreds of dollars) by a sample of six families. Monthly Income Monthly Rent 24 7.0 16 4.5 19 6.5 31 12.0 10 4.5 27 8.5 What is the 99% confidence interval for the mean monthly rent of all families with a monthly income of $2500, rounded to the nearest penny?
The 99% confidence interval for the mean monthly rent of all families with a monthly income of $2500 is given as follows:
(5.96, 22.38)
What is a t-distribution confidence interval?The t-distribution is used when the standard deviation for the population is not known, and the bounds of the confidence interval are given according to the equation presented as follows:
[tex]\overline{x} \pm t\frac{s}{\sqrt{n}}[/tex]
The variables of the equation are listed as follows:
[tex]\overline{x}[/tex] is the sample mean.t is the critical value.n is the sample size.s is the standard deviation for the sample.The critical value, using a t-distribution calculator, for a two-tailed 99% confidence interval, with 12 - 1 = 11 df, is t = 3.1058.
The parameters are given as follows:
[tex]\overline{x} = 14.17, s = 9.16, n = 12[/tex]
The lower bound of the interval is given as follows:
[tex]14.17 - 3.1058 \times \frac{9.16}{\sqrt{12}} = 5.96[/tex]
The upper bound of the interval is given as follows:
[tex]14.17 + 3.1058 \times \frac{9.16}{\sqrt{12}} = 22.38[/tex]
More can be learned about the t-distribution at https://brainly.com/question/17469144
#SPJ4
Is (x+5)2 equivalent to 2x2+10x +10? Explain why or
why not?
Answer:
no
Step-by-step explanation:
no because its equal to 2x+10
1/4 of my shirts are red, the rest are blue. Show the ratio of red to blue shirts
Answer:
1:3 red to blue
Step-by-step explanation:
you have x shirts. Let's call the number of red shirts r and the number of blue shirts b.
r = x * 1/4
b = x - r = x - (x * 1/4) = x * 3/4
r:b = (x * 1/4):(x * 3/4) = (1/4):(3/4) = 1:3
How many different simple random samples of size 5 can be obtained from a population whose size is 35? The number of simple random samples which can be obtained is a (Type a whole number.)
The number of different simple random samples of size 5 that can be obtained from a population of size 35 is 324,632.
To calculate the number of different simple random samples of size 5 that can be obtained from a population of size 35, we can use the combination formula. The formula for combination is given by:
C(n, r) = n! / (r! * (n-r)!)
where n is the population size and r is the sample size.
In this case, we have n = 35 (population size) and r = 5 (sample size). Plugging in these values into the formula:
C(35, 5) = 35! / (5! * (35-5)!)
Simplifying this expression:
C(35, 5) = 35! / (5! * 30!)
Calculating the factorial values:
C(35, 5) = 35 * 34 * 33 * 32 * 31 / (5 * 4 * 3 * 2 * 1)
C(35, 5) = 324,632
Therefore, the number of different simple random samples of size 5 that can be obtained from a population of size 35 is 324,632.
Learn more about the combination formula:
https://brainly.com/question/28065038
#SPJ11
HELPPPPPPPP 5TH GRADE MATH Select the statement that correctly describes the relationship between these two sequences: 1, 2, 3, 4, 5 and 10, 20, 30, 40, 50.
Each term in the second sequence is 10 times the corresponding term in the first sequence.
Each term in the second sequence is double the corresponding term in the first sequence.
Each term in the second sequence is 20 times the corresponding term in the first sequence.
Each term in the first sequence is double the corresponding term in the second sequence.
Answer:
Each term in the second sequence is double the corresponding term in the first sequence.
Step-by-step explanation:
pls mark as brainliest
The correct statement that describe the two sequences is:
Each term in the second sequence is 10 times the corresponding term in the first sequence.
What is an arithmetic sequence?This is a type of sequence which have common difference between each term. It is represent mathematically as:
Tₙ = a + (n – 1)d
Where
Tₙ is the nth term
a is the first term
n is the number of terms
d is the common difference
How to determine the relationship between the sequences Sequence 1: 1, 2, 3, 4, 5 Sequence 2: 10, 20, 30, 40, 50Relationship =?Relationship = sequence 2 / sequence 1
For the 1st term Sequence 1 = 1Sequence 2 = 10Relationship =?Relationship = sequence 2 / sequence 1
Sequence 2 / sequence 1 = 10 / 1
Cross multiply
Sequence 2 = 10 × sequence 1
For the 2nd term Sequence 1 = 2Sequence 2 = 20Relationship =?Relationship = sequence 2 / sequence 1
Sequence 2 / sequence 1 = 20 / 2
Sequence 2 / sequence 1 = 10 / 1
Cross multiply
Sequence 2 = 10 × sequence 1
If we continue with the pattern above, we'll discovered that
Sequence 2 = 10 × sequence 1
Thus, we can conclude that:
Each term in the second sequence is 10 times the corresponding term in the first sequence.
Learn more about arithmetic sequence:
https://brainly.com/question/16130064
Can someone please help me with math.
Answer:
A. 20.2 ft.
Step-by-step explanation:
Use the pythagorean theorem to find the missing side length.
a^2+b^2=c^2
11^2+17^2=c^2
Exercise 11.4.7
The following computer output is for an analysis of variance in which yields (bu/acre) of different varieties of oats were compared.
Sums of Mean Source df squares square F ratio Prob
Group 2 76.8950 38.4475 0.40245 0.6801
Error 9 859.808 95.5342
Total 11 936.703
Figure 6: Problem 11.4.7
(a) How many varieties (groups) were in the experiment?
(b) State the conclusion of the ANOVA.
(c) What is the pooled standard deviation, spooled
The values of all sub-parts have been obtained.
(a). There are three varieties were in the experiment.
(b). ANOVA condition has been obtained.
(c). Pooled standard deviation is 9.7742.
What is ANOVA?
To examine how different means differ from one another, analysis of variance is a collection of statistical models and the corresponding estimate techniques. Ronald Fisher, a statistician, created the ANOVA.
(a). Suppose that there are 1 variety or group in the study.
given df (between) = 2 and df (between) = (l - 1).
Therefore,
l = df (between) + 1
l = 2 + 1
l = 3.
(b). In the given ANOVA the p-value (prob = 0.6801) is large enough to accept the null hypothesis thus there is sufficient evidence to conclude that the always yield (bu/acre) of different verities of oats in three groups in same.
(c) Evaluate the pooled standard deviation:
Given MS (with in) = 95.3342 pooled standard deviation is,
Spooled = √(MS (with in))
Spooled = √95.3342
Spooled = 9.7742.
Hence, the values of all sub-parts have been obtained.
To learn more about ANOVA from the given link.
https://brainly.com/question/15084465
#SPJ4